Flash doesn't work on safari but it works on firefox

I have osx 10.9.1 and safari 7.0 and i have downloaded and 'successfully' installed flash multiple times over the last few weeks. it still does not work on safari and every site gives me the message 'flash out of date'. the same sites work on firefox though. i need it to work on safari too.

If that's checked, see: How to perform a "clean install" of Flash Player in Mac OS X

Similar Messages

Input type="image" only works in Safari, but not IE or Firefox?

Having accidentally discovered a form on a site I am working on was only working in Safari, I've just spent about five hours retracing my steps, before eventually discovering that the code that was making the form fail was my submit code.
The page I was looking at had quite a bit of validation, CAPTCHA code and some jQuery to style some drop downs, so I figured something there was the issue.
But it turned out just to be the submit button.
I've just tried it on my contact page, and its failing in Firefox (Mac) too (and so I assume IE as well.)
Should this work, or is using input type="image" on a form submit button a big no no?
This code works:
<input type="submit" name="KT_Insert1" id="KT_Insert1" value="Post your query" />
But this code does not work (except, it seems, in Safari):
<input name="KT_Insert1" type="image" id="KT_Insert1" onmouseover="MM_swapImage('KT_Insert1','','../images/buttons/post_enquiry2.jpg',1)" onmouseout="MM_swapImgRestore()" value="Post your query" src="../images/buttons/post_enquiry1.jpg" border="0" />
Or am I missing something here?

Thanks for that - might have realised this a lot earlier if it didn't work in Safari!
I assume I just need some CSS like:
.formbutton
background-image: image1.jpg;
.formbutton :hover
background-image: image2.jpg;
And:
<input type="submit" name="KT_Insert1" id="Send" value="Send message" class="formbutton" />

Forwarded to godaddy domain. works on safari but not explorer or firefox

I finally figured how to use my website so that when you type in the domain it redirects to the mobile me website. However, it is working just great on safari but not on explorer or firefox.

I have always used GoDaddy's forward and masking utilities and its worked great. When Apple updated iWeb to 08 with the ability to auto forward, I had lots of issues and thus went back to setting up my GoDaddy preferences to auto-forward and mask my site. GoDaddy has the very best phone support on the planet which makes up for one of the worst websites on the internet. Call them up and have them walk you through auto-forwarding and masking. Check out my site at: www dot jennifersheehan dot com. Hope that helps

Created site in IWEB 08, works on Safari but looks different with Firefox?

I created a site with Iweb 08. I used Safari as the viewing browser and was happy with how the site looked. I then used Fetch to FTP the folder to the web server. When viewing the page on the server with Safari it was great, but when viewed with Firefox it was all frigged up. I didn't try it with Internet Destroyer cause personally I don't like it. I then published the page folder to Web.Mac.Com. The site works great on both browsers when accessed through web.mac.com. Is there something missing when accessing the site on my original server? My thought now is to remove the site from the original server and just bite the bullet and fly it on web.mac.com. Appreciate any thoughts

I think part of my problem was trying to move content made with Dream Weaver into IWEB. My site was made with Dream weaver originally. I pasted it into IWEB, thinking it was possible to do. It was to a point. I had to redo all my links and buttons and so on, but the pictures and text content seemed to look fine. After somewhat completing the site I published to a folder and used Fetch FTP to move the site to the server I was using. That is when i got the different looks in different browsers. I then published to the .mac server as I had a 60 day free trial. Low and behold the site looked good on the 2 browsers I have on my new IMAC. I switched over to the Windows side of the IMAC and logged into the site with IE 7. It looked good there too. So I ended up going with the .mac account to host the site
www.unitedpuett.com. I then had to redirect from Network Solutions, my registrar for the site, so when the address was typed in it would direct to the .mac server. This was another chore but was solved easily by
http://networkcreators.ning.com/profiles/blog/show?id=492224%3ABlogPost%3A50148
It all seems to work as it should.
On another note, i read that Microsoft was releasing IE 8 beta. The big change was they were finally standardizing their browser to match all the others when opening pages.

Iweb won't work on Safari but WILL work on Firefox!

This is a good one. I just updated my iweb page. It said it was uploaded successful and do I want to visit, announce or 'ok' (you know). Anyway, I said "visit now" and the updates showed up fine. BUT when I typed in my website directly into a URL using Safari, the updates were NOT there! BUT when I typed it in directly using Firefox, the updates were there! HUH?
So to recap, it shows updates from "visit now" and from directly typing in the address into the URL using Firefox....but not using Safari. Anyone know why Safari is such a baby?

which version of safari are you using? In safari 4 it's under the 'safari' menu 'empty cache'. Can't remember where it was in earlier versions! In firefox it's under prefs/network. You should always clear your cache when updating. Browsers remember things so it takes less time to load, but if you update then it might reach for the old info. In fact... I clear my cache a few times a day depending on what sites I am visiting and if I am updating my own sites.
upper vs lower case letters... make sure you type the url exactly as you have named it in iweb. case sensitivity matters. IE: www.yourname.com/page1 vs www.yourname.com/Page1
Lisa
Message was edited by: LSDLLC

Flash Player works in Safari but not Internet Explorer 9

I've installed Flash Player 10.3 and it works in Safari but not Internet Explorer 9. When I look in Manage Add-Ins I see Flash Shockwave but not Flash Player. My operating system is Windows Vista Ultimate (32bit). Safari is 5.0.5 and IE 9 is 9.0.8112.16421. I've tried uninstalling and re-installing Flash Player and uninstalling Norton 360. Nothing has worked so far. Can you help?

Thank you for your reply. Shockwave is loaded and enabled.
The files in flash directory are: a folder called FlashPlayerTrust: file, flash10q.ocx: file, FlashInstall.log; file, FlashUtil10q_ActiveX.dll; file, FlashUtil10q_ActiveX.exe, file, install.log.
There is no file: NPSWF32.dll.
When I test the browsers I get no spinning logo in either Safari or IE9. Safari says: missing plug-in, where I think the logo should be. IE-9 says nothing at the same location.
Thanks.

The "new" hotmail no longer works with safari, but works with firefox. Hmm.

The "new" hotmail no longer works with safari, but works with firefox. Hmm. i find this very convenient being a microsoft product. anybody else wonder why this new version happens to not be safari compatible? does anybody know if it works on the PC version of safari? if not, i find this to be a blatant move on microsofts part to bias the safari browser (especially since its basicly new on the window platform). forcing safari/hotmail users to "have" to use another browser to access their hotmail accounts.

I have been successfully using Hotmail and Gmail with Safari for a long time. For roughly the past month, that relationship is rocky at best. At times, one of the following actions suddenly opens Hotmail, but it is a short-lived solution:
(a) Hotmail directly
(b) Hotmail Home>Hotmail
(c) Sign up to Windows Hotmail
(d) Deletion of prescribed cookies, resetting, etc. - made no difference
Both Firefox and Opera work fine with Hotmail - especially Opera is very fast.
In addition, Safari and Gmail does not work with Attachments, but otherwise Gmail is OK.
I suspect I have to wait for a Safari fix because in my case I do not wish to abandon Hotmail, and Safari is a given. I would think that Safari would want to stay competitive with the two biggies, Hotmail and Gmail, which must have large numbers of users.
I certainly would appreciate any other suggested fixes.

I can't reposition photos i post to my timeline on facebook using safari, but it works via all other browsers.. I used to be able to but now I can't. Any ideas as to why?

i can't reposition photos i post to my timeline on facebook using safari, but it works via all other browsers such as fire fox and chrome.. I used to be able to but now I can't. Any ideas as to what is causing this?
Kind regards,
Grand

Empty the Safari cache...
Command + Option + E on your keyboard.
Quit and relaunch Safari. Try to re position an image on FB.

Facetime, imessage and find my ipad doesn`t work over wifi but they work over 4g

Facetime, imessage and find my ipad doesn`t work over wifi but they work over 4g, please help me

Are you sure?
According to Apple Facetime will only work over WiFi. IOS 6 will bring feature that you can make Facetime call over 3g-4g

The javascript code which is working on safari is not working on firefox. When I debugged it from HTTPFOX it gave NS_ERROR_DOCUMENT_NOT_CACHED error

I have a javascript code which is working fine with safari but not working at all in firefox. The code is
<pre><nowiki><html><head></head>
<body>
<button type="button" onClick="handleButtonClick();">undo</button>
<button type="button">redo</button>
<select><option value="V1">V1</option>
<option value="V2">V2</option>
<option value="V3">V3</option>
<option value="V4">V4</option>
<option value="V5">V5</option></select>
<script type="text/javascript">
function handleButtonClick(){var xmlHttp, handleRequestStateChange;
handleRequestStateChange = function() {if (xmlHttp.readyState==4 && xmlHttp.status==200) { var substring=xmlHttp.responseText; alert(substring); } }
xmlHttp = new XMLHttpRequest();
xmlHttp.open("GET", "http://csce.unl.edu:8080/test/index.jsp?id=c6c684d9cc99476a7e7e853d77540ceb", true);
xmlHttp.onreadystatechange = handleRequestStateChange; xmlHttp.send(null);}
</script>
</body>
another I am getting this also in url text/html (NS_ERROR_DOM_BAD_URI)
</html>
</nowiki></pre>
Whats going wrong I can't figure out. Kindly suggest... I am struggling with this for last few days..

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

Everytime I open Firefox - error: "...Firefox could not find your Proxy configuration..." The thing is I'm not using Proxy. Then I go to settings windows, network, put No Proxy, and then everyting works ok. BUT always I open Firefox, it happens again.

Everytime I open Firefox, it shows me a error: "...Firefox could not find your Proxy configuration..." The thing is I'm not using Proxy. Then I go to settings windows, network, put No Proxy, and then everyting works ok. BUT always I open Firefox, it happens again. Help me , Please
Everytime I open Firefox, settings in Network appear: Manual Proxy and shows me a ip number and port

See:
* http://kb.mozillazine.org/Preferences_not_saved

Home share not working on iPad but is working on iPhone

Home share not working on iPad but is working on iPhone

Have you signed in at Settings > Music with same Apple ID and password as you used in iTunes and on your iPhone to enable Home Sharing?

My Xlite 4.0 software does not work with Jetpack but does work with droid hotspot can this be fixed?

My Xlite 4.0 software does not work with Jetpack but does work with droidx hotspot can this be fixed? I have attached a packet capture for packets from DROIDX with android 2.3.4 marked as XliteWith3G.cap and a packet capture for Xlite with the Jet pack XliteWith4G.cap obiviously same packets coming from Xlite different results depending on WiFi connection.

Hi Vidya,
Thanks for posting your example. You may want to remove your workspace details from the previous posting, or at least update the password on the workspace. I've taken a look at your example and initially couldn't see anything wrong with your tree query. However, when I ran your query in SQL Workshop, it only returned one row, which would explain why you were only seeing one node in your tree! I've updated your query to use a WITH clause, and the tree is now working correctly. I believe you've hit an underlying database bug where the CONNECT BY query is only returning 1 row, when in fact it should return > 1 row. By re-writing the query to use a WITH clause, you can get around the problem.
Regards,
Hilary

Plug-in Failure (Flash not working in Safari but working in Chrome)

Hi There,
I realise there have been threads on this subject but I seem to have tried everything besides re-installing ML at this stage.
When loading any flash content on any website within Safari - I receive a 'Plug-in Failure' message where the content should appear.
I feel the problem has been occurring since downloading the newest update
I was hoping someone could point out if I had missed out on something
Here are the steps I have taken to attempt to resolve this...
1. Uninstalled and reinstalled the latest version of Flash. (This actually did work once for about a half an hour, i've tried it about half a dozen times)
1a. Turning my computer off and on again
1b. Attempted downgrading my Flash version but the flash installer kept failing.
2. Logged into a guest account (Flash didn't work in safari)
3. Booted up in Safe Mode (Flash worked but very slowly)
4. Reset Safari (Flash didn't work)
5. Disabled Extensions (Flash didn't work)
6. Enabled Plug-ins & Java within Safari (Flash didn't work)
7. Removed plug ins that I believed may be effecting it (Flip4Mac) (Flash didn't work)
8. Deleted all data in the pref pane for Flash (Flash didn't work)
9. Removed all website data within Safari (Flash didn't work)
10. Tested Firefox and flash is also not working in firefox.
The console is showing the following Pluginprocess crash:
Process:         PluginProcess [2331]
Path:            /System/Library/PrivateFrameworks/WebKit2.framework/PluginProcess.app/Contents/ MacOS/PluginProcess
Identifier:      com.apple.WebKit.PluginProcess
Version:         8536 (8536.30.1)
Build Info:      WebKit2-7536030001000000~9
Code Type:       X86-64 (Native)
Parent Process: Safari [2257]
User ID:         501
PlugIn Path:       /Library/Internet Plug-Ins/Flash Player.plugin/Contents/PlugIns/FlashPlayer-10.6.plugin/Contents/MacOS/FlashPlay er-10.6
PlugIn Identifier: com.macromedia.FlashPlayer-10.6.plugin
PlugIn Version:    11.8.800.94 (11.8.800.94)
Date/Time:       2013-09-01 01:45:37.808 +0100
OS Version:      Mac OS X 10.8.4 (12E55)
Report Version: 10
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000 - this line looks quite suspect to me...
VM Regions Near 0:
-->
    __TEXT                 00000001072e8000-00000001072e9000 [    4K] r-x/rwx SM=COW /System/Library/PrivateFrameworks/WebKit2.framework/PluginProcess.app/Contents/ MacOS/PluginProcess
The above crash log is repeated several times. (there's more to the log but i thought i'd just paste in the above)
Desparate to resolve this - chrome is so ugly and buggy! (Not to mention so Google)
Thanks in advance!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Paypal button doesn't work on Safari. but works on Firefox

I have over 100 pairs of "Add to Cart" buttons on my website. One of each is on the individual item page and the other is on my Order Form.
I have one button that works on the order form, but the identical button doesn't work on the individual page when using SAFARI, but works when I use FIREFOX!
I have recreated the button several times and put it in the proper place several times, saved the changes and republished. Still it doesn't work in Safari!
This must be a Safari issue not a PayPal issue
Any suggestions?

If that's checked, see: How to perform a "clean install" of Flash Player in Mac OS X

Flash doesn't work on safari but it works on firefox

Similar Messages

Maybe you are looking for