Flash drive somehow corrupt. Finder won't recognize it and Disk Utility won't repair it

I have a 16 GB SanDisk Cruzer flash drive. Somehow, and I haven't figured it out yet, but is got corrupted and Finder won't recognize anymore. So I opened Disk Utility and verified the disk and it said that it needed to be repaired. So I tried it and I got the message saying "Disk Erase failed with the error: File system formatter failed." And when I try to reformat it, I get the same message. I've tried it with a PC as well but it doesn't show up and Disk Manager won't reformat it either. I've given up on recovering the files, but I still would like to recover the drive. Any solutions would be appreciated.

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions

Similar Messages

Upgraded to 10.5.6 and Disk Utility won't repair?

I upgraded to 10.5.6 and ran Disk Utility and got the report below. Should I be concerned about it?:
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "usr/bin/setregion" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/Printers/IOMs/LPRIOM.plugin/Contents/MacOS/LPRIOMHelper" has been modified and will not be repaired.
Group differs on "private/etc/cups", should be 0, group is 26.
Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
Permissions repair complete

No. TM backups are not usable to downgrade to an earlier version of OS X. Archive and Install is the proper method.
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

G4 Dual 1.43 Ghtz won't boot and disk utility won't repair it

I can't get the Boot Disk Disk Utility to repair the drive on my old G4 Dual 1.43 and desparately need the Documents file and home folders. Any ideas ?

This isn't going to be easy.
Does disk utility try to repair the drive? If it mounts, you could try the software I list below.
You either goint to have to get an external firewire drive & install some mac os on it. Then run some utilities from this drive or you going to have to get the drive out and mount in an external enclosure & run utilities.
There our commercial places that recover data. They will not be cheap.
I do not know what type of drive you have in the machine. So before buying an empty enclosure check.
Has everything interface:
FireWire 800/400 + USB2, + eSATA 'Quad Interface'
save a little money interface:
FireWire 400 + USB 2.0
This web page lists both external harddrive types. You may need to scroll to the right to see both.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
The latest the hard drive enclosures support the newer serial ata drives. The drive and closure that I list supports only older parallel ata.
Here is an external hd enclosure.
http://eshop.macsales.com/item/Other%20World%20Computing/MEFW91UAL1K/
Perhaps Disk Warrior will be of some help:
http://www.alsoft.com/DiskWarrior/
"Stellar Phoenix Macintosh - Mac data recovery software, recovers data from damaged, deleted, or corrupted volumes and even from initialized disks."
They have a trial version, so I guess you can see if your data can be recovered...
http://www.stellarinfo.com/mac-data-recovery.htm
"Data Rescue II is the best data recovery software on the market for recovering files from a problem hard drive. Data Rescue II works when other tools fail. Data Rescue II is also completely safe to use since it does not attempt any risky repairs to the drive while its scanning."
http://www.prosofteng.com/products/data_rescue.php
FileSalvage is an extremely powerful Macintosh application for exploring and recovering deleted files from a drive or volume. FileSalvage is designed to restore files that have:
-- been accidentally deleted.
-- become unreadable due to media faults.
-- been stored on a drive before it was re-initialized/formatted.
http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
"TestDisk is a free data recovery utility. It was primarily designed to help recover lost data storage partitions and/or make non-booting disks bootable again when these symptoms are caused by faulty software, certain types of viruses or human error (such as accidentally erasing a partition table)."
http://en.wikipedia.org/wiki/TestDisk
"*Hard drive data recovery and warranty implications*
Hard drives that have become non-functional through normal use, and have had data recovery performed on them by DriveSavers or Ontrack Data Recovery can be returned to Apple for warranty service. This includes products covered by the AppleCare Protection Plan. The cost of any data recovery attempts is not covered by the Apple Limited Warranty."
http://support.apple.com/kb/HT3974?viewlocale=en_US
Entering:
mac data recovery
into Google will list some firms who specialize in recovering data. Data recovery isn't cheap.
Examples:
1) Ontrack Data Recovery is the world leader in data recovery services and data recovery software offering the fastest, most convenient and cost-effective solutions to clients who have experienced data loss.
http://www.ontrackdatarecovery.com/
2) Enter the world of DriveSavers Data Recovery…
    * Data Recovery Tools
    * Data Recovery Process
    * Data Recovery Cleanroom
http://www.drivesavers.com/

Safari, Mail and Disk Utility won't run unless Font Book is Open

Recently Safari, Mail and Disk Utility would crash and spin and the "Application Not Responding" line would appear when I checked the program in the dock. After following a variety of tips from other Apple users, I finally got the programs to run. However, I started them while Font Book was open and now they only work when it remains open. I've been using Apple/Mac products since the beginning of time and have never seen anything like this. I've repaired permissions, throught out preferences, etc., etc. and can't resolve this problem. Please, someone, help me.

Hello buhrow:
That makes two of us that go back to the beginning of time and have never seen anything like that. Have you run the fontbook applications to eliminate duplicates and check for corrupt fonts? Offhand, I cannot understand why just having a program open would prevent other programs from crashing.
If nothing else works, you might want to consider an archive and install (after backing up, of course):
http://docs.info.apple.com/article.html?artnum=107120
Barry
Message was edited by: Barry Hemphill (spelling, no checker)

Stuck at "starting login window" and Disk Utility won't fix it...

I downloaded some security updates, and since restarting my computer as required, I have never been able to start it up since. It gets stuck on the "starting login window" screen, with the little blue bar still shimmering and mouse still moving, but just won't ever load the login screen, even after hours.
I've seen a few other people have had this problem, and tried to follow some of the recommendations, with no joy. I tried several times to repair the disk permissions with Disk Utility, but it has an internal error saying it lost the connection to the disk manager, or something similar.... when I try to repair the disk, it fails saying something about "overlapped extent allocations" and an "invalid node structure".
I can start up in single-user mode, and doing a fsck had the same result.
What can I do??? Some people suggested an Archive and Install manoeuvre, but I'm scared of losing all my files! Will it erase them all? Do I have to back up all my files before doing this? How can I back them up if my computer won't start?
I know almost nothing about computers - all I know I have found in the past few days searching through these discussion boards trying to find an answer! I have an important essay due on Monday which is stuck in my computer, so I'm a little scared!
I'm using Mac OS X Panther or something.... not sure how to find out exactly which one, as my computer won't start!
Any help would be greatly appreciated!
iBook G4

Hi, you have some serious directory damage there, and it was probably there before the updates. An Archive and Install would not be recommended. If you did that you would likely have more problems then you have right now.
If it were me I'd run Diskwarrior and Tech Tool Pro on it. DW for the invalid node structure and Tech Tool Pro for the Overlapped Extent Allocation. But you probably would have to buy both of them, and there's no guarantee either one will fix it.
Apple doc.#25770, talking about Overlap..... says the easiest way to fix it is to Erase and Install. If you are running 10.3.9 and had access to a retail Tiger disk, you could try booting up on it and running Disk Utility. Tigers DU has the ability to fix Overlap.... sometimes, Panther's does'nt.
This is the best way to Erase and Install. First backup all your important stuff, if you can, as the following will erase everything on your drive; it will be unrecoverable. Put your install disk in your Mac and Restart while holding down the C key. In Tiger, When you get to the install screen, don't click install and go to the title bar at the top of the screen and click on Utilities (in earlier OS's click on the installer menu).
Click on Disk Utility and choose the hard drive you want your OS on. Then click on the Erase tab. In Tiger, click on the Security Options button near the bottom (it's similiar for Panther and Jaguar).
Once in there choose Zero Out Data (write zero's in earlier versions). This will map out any bad blocks on your drive and bring it back to almost new condition (providing there's nothing wrong mechanically with it, bad bearings, defective or damaged surface, etc.).
Once this is done, go back to the install screen and begin the "Erase and Install" installation. This will put a factory fresh system on a clean hard drive.
Cheers!
DALE

Hard drive clicking and disk utility can't repair

I have an iBook G3 that recently started making a clicking noise from the left side of the computer. At the same time it froze up and now it won't start up. I tried to start it in safe mode and it didn't work. I was able to start the OS X install disc and start the disc utility, but I get an error: Invalid Sibling Link, Volume Check Failed.
Does anyone know if there is anything else I can do to try to repair the hard drive myself? If not, how do I find someone reputable to get the data off of the drive (no I didn't back it up... ever) and install a new drive?
Thanks for any suggestions!

Hi, and welcome to Apple Discussions.
You could buy DiskWarrior and see if it can repair your hard drive. It can often repair a hard drive when Apple's own Disk Utility cannot. No guarantees that it can do it for yours, but DiskWarrior has saved my hard drive several times.
If you are able to get it up and running, be sure to back things up right away.

Disk read error, and Disk Utility won't open

Have a PowerMac G4 dual 800mhz, with two hard drives. Mac OS X 10.3.9 is installed on HD1. I use HD2 for miscellaneous files.
Using the Azureus bittorrent client, I'm getting "Error: Disk read error - Input/output error, read fails" in the Status column when trying to download something to HD2.
However, I'm able to upload files from HD2 for other users, and I'm also able to play video files that are stored on HD2 without problem.
The real issue is that when I went to see if I could fix anything by opening Disk Utility, it won't open. It goes into an immediate state of Not Responding. It won't listen to me when I tell it to Force Quit... I have to wait a long time, or restart the computer, to get it to stop showing up in the dock.
Any advice would be appreciated.

To repair a startup volume you must do the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

I inserted a DVD into my laptop and now it won't recognize it and it also won't eject it.

I have tried rebooting the laptop and have heard it spinning and clicking but when I go to log in, it still won't reconize it. I can't eject it. Is there any way to fix this problem?

if none of the below options work, you will need to bring it to a professional.
Force eject a stuck cd/dvd
First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

Something's wrong with my hard drive, and disk utility can't repair it...

Lately my MacBook Pro has been running really slow, so I ran Disk Utilities to see if it could fix it. However, when I ran it, the following is what I see. Would someone help me interpret what's going on? Thanks.
Verify permissions for "HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Warning: SUID file "usr/bin/at" has been modified and will not be repaired.
Warning: SUID file "usr/bin/atq" has been modified and will not be repaired.
Warning: SUID file "usr/bin/atrm" has been modified and will not be repaired.
Warning: SUID file "usr/bin/batch" has been modified and will not be repaired.
Warning: SUID file "usr/bin/chfn" has been modified and will not be repaired.
Warning: SUID file "usr/bin/chpass" has been modified and will not be repaired.
Warning: SUID file "usr/bin/chsh" has been modified and will not be repaired.
Permissions verification complete
Verifying volume “HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Incorrect number of file hard links
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume HD needs to be repaired.
Error: Filesystem verify or repair failed.

Two things. First for the permissions check, reinstall the 10.5.2 COMBO update and repair permissions. That should fix things. Alternatively, search these forums for ACL, sort by date, and read the responses and the article Apple posted three months ago: http://docs.info.apple.com/article.html?artnum=306925
Second, for the *Incorrect number of file hard links* error, follow smithrj's advice. If DU can't repair the disk, you'll need something stronger, such as DiskWarrior.
BTW, please update your *My Settings* profile info. It still shows that you're running Tiger.

Disk utility won't repair permissions (related to error -8003)

I have an odd, recurring problem I can't diagnose. Recently my seven-month-old MacBook Pro has begun showing an error code (-8003) when I try to do common, system-related things like empty the Trash. At the same time, Time Machine stops backing up and Disk Utility can't repair permissions. If I go into System Preferences I can't open the lock to make changes, even though my account is still clearly marked as the Admin account. All third-party applications run fine, so I can't quite figure out what's going on.
I've tried repairing the disk via TechTool to see if there was directory damage and it checks out fine. I've reformatted my TM backup disk with Disk Utiity according to Apple's instructions, used the Terminal to ensure my Trash and old TM files were properly deleted, etc. Nothing seems to have made a difference.
When I restart the problem goes away for a couple of hours and then – at some point that I haven't been able to identify – the problem starts up again. This is the case whether I'm working on the MacBook or if it's just sitting there idle.
Before I reinstall I wondered if anyone had run into a similar problem and had figured out what caused it.

error code (-8003) when I try to do common, system-related things like empty the Trash
That's a common symptom of throwing stuff from a Time Machine backup into the trash in the Finder, which is a big no-no and can irreversibly corrupt your backup. In the Terminal, type the following command:
sudo rm -rf ~/.Trash/*
Copy and paste that! Don't try to re-type it, I've seen people put a space in the wrong place and wipe their whole user folder. Type your password when prompted, and expect that nothing will show until you hit return.
Next, repair your Time Machine backup according to:
http://web.me.com/pondini/Time_Machine/A5.html
At the same time, Time Machine stops backing up
If the above troubleshooting doesn't fix your backup, you may have damaged it beyond repair. In that case, you'll have to erase it and start your backups over from scratch.
Disk Utility can't repair permissions
Where are you trying to repair permissions? Note that repairing permissions is only meaningful on a drive with a system installed on it, and only repairs permissions on a specific subset of the stuff on the drive. Also, note that there are permissions messages you can safely ignore... if you think it is failing because you're seeing them over and over, it's not failing.
If I go into System Preferences I can't open the lock to make changes, even though my account is still clearly marked as the Admin account.
I've never seen that before, and it may indicate you have much more serious problems with your computer. First, try repairing your hard drive with Disk Utility. Then trash the System Preferences preference file, located at:
~/Library/Preferences/com.apple.systempreferences.plist
...where '~' means "your home folder".

How do I repair a damaged dmg that won't mount and Dick Utility can't repair?

Apple Care gave me wrong instructions on how to create a disc image of my internal HD then erased it. Now I have a .dmg that has the same gigs as the HD but won't mount and Disk Utility can't repair. Tried to recover files with Data Rescue 3 but that isn't going so hot. Any suggestions?
Thank you

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
I guess that it's a moot point to ask if you didn't test the dmg before you erased the drive. Do you have a Time Machine or other type of backup?
If not, it's a hard lesson to learn, but I would guess that unless you are willing to pay for expensive outside data recovery service, all is lost and you are starting over.

Disk Utility - Won't Repair Flash/Thumb Drive

So my Mac froze for some reason, while my Kingston thumb/flash drive was in. I tried to eject it, but I could only force eject (which it said may cause issues). After that, whenever I put the thumb drive in, it said something like the drive won't work and I had to copy the files to my desktop. When I go into disk utility and click repair disk, it says this: "Disk Utility stopped repairing “UNTITLED 1”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
I can't erase the thumbdrive, because it says I need a source, which I don't know what that means.
Can anybody help? The files are useless now as I have transferred them to a CD, so I'm fine with erasing the whole thing. And yes, I know I can get a new on at any store for cheap, but I'd like to know if this can be repaired. Thanks.

You haven't mentioned how the thumb drive was formatted to begin with; is it GUID partition map and Mac OS Extended (Journalled), or is it FAT 32 with MBR partition map?
If it's the latter, DU can't repair it, but should be able to format it. However, the forced ejection may have damaged the file system to prevent that.
If it's FAT32, re-format it on a PC and try again on the Mac.
If it's Mac formatted, you could try erasing and reformatting on another Mac (or as Hackintosh says, from the DVD), but if that doesn't work, try the PC route; reformat to FAT32 on a PC (if the PC will recognise it - thay don't always), then go back to the Mac, repartition and format.
If that fails, it's recycling fodder.

My ipad2 says Apple won't allow Adobe Flash driver to load. How can I view and hear talking greeting cards?

My ipad2 says Apple won't allow Adobe Flash driver to load. How can I view and hear talking greeting cards?

IOS device do not support Flash
However Skyfire, Photon, iSwifter and Puffin Web Browser will provide limited Flash capability.

Macbook Pro (late) 2008 won't recognize HD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???D a

Macbook Pro (late) 2008 won't recognize HDD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !???
And HDD is APPLE certified ( 250 GB )

Hello JashaCOLD,
Thank you for the details of the issue you are experiencing with your external hard drive. I found an article with steps you can take when an external device is not being recognized.
I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151
Thank you for using Apple Support Communities.
Best,
Sheila M.

Upgrade won't recognize the hard disk to begin the installation

Powerbook G4 w/ 9.2.2 & the original CD for OS X 10.1 - thought I'd get it on and upgrade from there since I know I'll need to buy more RAM - existing is 385 & I only have 10 G on the system. I downloaded several updates, ran the security update first. The 10.1.1 update won't recognize the hard disk to begin the installation.Thought I had a clue, but stuck in the jungle upgrading. Which one is which - is Jaguar 10.2??? Do I need to be doing each of these upgrades to get it running well until I add the RAM? I'm trying to stay calm since it updated my IE and I think I lost everything I had on it - too fast with the click and assumed they were separate entities....(unless there is a genius out there who can help on that front too)
many thanks... Kate

Hi Kate! And Welcome To Discussions!
You're lucky Kappy is helping you out with this. He is one of the more knowledgable posters here!
I'm just adding some extra info.
There are two PowerBook models that need a Firmware Update, before you can install a newer OS X.
Check if one of them is yours.
Mac OS X Versions 10.1, 10.2, 10.3, and 10.4, are complete system upgrades that must be purchased.
The point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), and 10.4.x to 10.4.6 (Pending), can be downloaded for free.
Tiger is available for purchase at The Apple Store (U.S.).
Jaguar and Panther, are no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
Jaguar Full Retail Version CDs, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version of the Tiger Install DVD, can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Jaguar and Panther are only on CDs, not DVDs.
More info here Tip: Using OS X Install CDs/DVDs On Multiple Macs
Once Jaguar 10.2.x is installed, you can use the 10.2.8 combo update,
or if Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final edition of either OS.
If your Mac meets the System Requirements for Tiger, you could also consider installing that.
And then use the 10.4.6 Combo Update.
You'll find System Requirements in these links:
Panther
Tiger
Additionally,
"Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95."
Download The order Form Here. Media Exchange Program
Shop Carefully, Examine All Documention, And Good Luck!
ali b

Flash drive somehow corrupt. Finder won't recognize it and Disk Utility won't repair it

Similar Messages

Maybe you are looking for