Flash drive + speed issue

My macbook is running slow as ever. it freezes every now and then.
The biggest problem is that it takes more than 5 minutes to detect a flash drive.
i am using 10.5.8 and i have 1gig RAM. i repaired all the disk permission but that did not slove the issue. i am fed up force shutting down my macbook. please help.
thankyou.

Try reinstalling OS X:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
Also, add more RAM to your computer. 1 GB is not enough. You should use 2 GBs or more (if your model supports it.) Also be sure you maintain ample free space on your hard drive - 10 GBs or 15% of the hard drive's capacity whichever is greater.

Similar Messages

I would like to buy a developer license to use on a mac at a public library from a flash drive any issue with this?

I would like to buy a developer license to use on a mac at a public library from a flash drive any issue with this? Very new to this

The license is for the Developer not the machine it is run on However there could be soma issues with trying to develop on a public machine.
The biggest is does the library machine have or will they let you install and run Xcode and if you are developing for IOS will they let you plug in your devices?
In addition will they allow you the hours needed on the machine? Most public machines have a time limit especially if there are others waiting to use it.
All-in-all in can be done but it won;t be an easy situation.
good luck

Flash drive speed?

I used to back up about 3 GBs of data to a flash drive at the end of each day and it would take about 20 minutes with Mountain Lion. Now the same amount of data on the same flash drive takes over an hour... Anyone know why that might be? Anyone know how I might speed up this process?

If your Mac has USB3 support, then I would suggest getting a USB3 rated FlashDrive, which should be much faster transferring data.

USB Flash Drive Formatting Issue

Hi,
I formatted my 16 gig PNY flash drive using OSX to MS-DOS (FAT). So one would think I'd be able to use it with my PC as well. Well, I can't. It's telling me the drive isn't formatted when I plug it into the PC, and when I do format it, I get a measly 200 megabytes. That's it. Am I missing something here? I'm about to snap the flash drive in half. Thanks!
BB

Most likely you did not partition the drive properly. Do the following:
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your flash drive (the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to MBR then click on the OK button. Set the format type to MS-DOS. Click on the Partition button and wait until the process has completed.

Serial ata 133 vs ata 66 vs lacie firewire external d2 drive speed issues

I have an older power mac tower that has built in ata 66. I have a large music collection (300 gigs) that resides in a lacie firewire (D2) external drive. When I make a play list, itunes makes me wait about 20 seconds to create the playlist which drives me crazy (spinning beachball). I also use the computer for logic pro.
I want to increase the internal capacity of this computer. I am wondering....is the external firewire drive faster than what an ata 133, 7200 rpm internal drive would be. Secondly, is ata 133 really that much faster than ata 66. Thirdly, does anyone know if drive speed has anything to do with the itunes sluggishness?
Any suggestions?
power mac g4 dual 450 Mac OS X (10.4.1)

Wow. I was thinking of posting a similar question myself. I have a G3 as a hardware router (for filtering) and I was wondering how to speed it up.
The research I've done so far has yielded these tidbits:
1) ATA 133 isn't much faster than ATA 66 for a single drive. Why? Most drives don't transfer data quickly enough to use the whole 66 Mb/sec bandwidth of ATA 66 anyways. The newest drives that have burst speeds above 66 Mbs could make a difference, but burst speeds are rarely achieved. I've been looking and I've found lots of ATA 100 drives, but no ATA 133 drives. You'd have to get a 10k Raptor or a RAID setup to see an appreciable difference from ATA 66 to ATA 133.
2) The upper speed limit of FW 400 is 50 Mb/sec. However, the data goes through the FW bridge, which then gets fed to the native IDE drive on the other side. This takes time. External FW drives of the same RPM and protocol (ATA 33, etc) are slightly slower than their internal brethren.
HTH,
~FifthWheel

Flash Drive Speed Test?

Any one that has a new MBA, could any one try the AJA disk speed test application on it to see what the drive read and write speeds are?
Cheers

Running QuickBench's small random test, I average the 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K, and 1024K random reads and writes.
RESULTS for the 128G Flash Storage on the 11" MacBook Air:
Random Read Avg = 96 MB/Sec
Random Write Avg = 94 MB/Sec
RESULTS for the 256G Flash Storage on the 13" MacBook Air:
Random Read Avg = 96 MB/Sec
Random Write Avg = 93 MB/Sec
RESULTS for other drives in a MacBook Pro:
The Seagate Momentus 7200.4 notebook HDD = 17MB/s READ, 22MB/s WRITE
The OWC Mercury Extreme SSD = 149MB/s READ, 139MB/s WRITE
The Apple SSD = 100MB/s READ, 88MB/s WRITE.
Message was edited by: rob_ART

Hard Drive speed issue

I recently deleted many of my itunes videos from my hard drive. after importing some new ones when i try to play them it takes several second (and colour spin wheel) before it starts playing unlike befor where they started playing immediately. any one know why?
is my disk fragmented? what program should i use to defragment it?

franchou:
Welcome to Apple Discussions.
comment effacer les données sur mon disque pour gagner de l'espace?
Dr. Smoke's FAQ Freeing space on your Mac OS X startup disk has helpful suggestions on how to remove unwanted/unneeded items from the Hard Disk Drive to free up space. There are other things one could do to free up space. However, if you find that you are running out of space on your internal Hard Disk Drive, it is an indication that you need a larger capacity drive to accommodate your computing style.
Please do post back with further questions or comments.
cornelius

USB Flash Drive Issue On iMac - 1.1 on iMac, 2.0 on any other Mac

I have a Core i7 27" Late 2009 iMac.
I just noticed this issue today.
I have a couple of Patriot XPorter XT USB Flash drives that I use among my Macs to transfer big files around.
Hooking one of the 8GB flash drives to my iMac, the one listed above, it shows the device operating at USB 1.1 speeds, whether it's in a powered hub, or one of the 4 USB ports in the back of the machine. This was odd, because this was the first time it had ever done this. I only noticed this due to the painfully slow transfer rate the Finder was reporting to me. Restarting the iMac, cold starting the iMac, resetting permissions, PRAM and SMC did nothing. I thought it was a bum drive.
So I grabbed a 16GB flash drive (same brand and model family, different capacity) and it works perfectly fine on the iMac at USB 2.0 speeds. Hmm...
So I boot the iMac into Win 7 Ultimate x64. Both drives are listed at USB 2.0 speeds. Something is definitely afoot here.
To make sure I'm not losing my sanity, I grab my MacBook Pro and test the drives in there. Both drives are listed at USB 2.0 speeds.
I then run to my Mac Pro. Both drives are listed at USB 2.0 speeds.
Did something go wonky on my iMac?
Machine specs (for comparison above)
iMac 27" i7 2.8GHz - 16GB RAM
MacBook Pro 15" Core 2 Duo 2.4GHz - 4GB RAM
Mac Pro Xeon 2.66GHz - 12GB RAM

I think that you are just running into a communication blip between the thumb drive and the controller for the USB ports on your iMac. It is obviously reading the 8 GB drive as older and slower and is assigning that lessor priority to the bus serving the drive.
Have you tried attaching the drive directly to the iMac with no other device connected to a USB port? If it is the same, then I doubt there is anything that you can do, that is going to be the way the USB controller reads this thumb drive.

IMac goes to sleep unexpectedly, Finder issues with flash drives - related?

My iMac falls asleep for no known reason, often in the middle of active use. (Similar problem recently described in thread with messageID=11829917.)
Sleep onset is frequent but seems to vary based on both currently-running software and attached devices (particularly USB flash drives). It will almost always wake up when I hit the space bar afterward, but might sleep again within a minute or two, then not for an hour or more. The sleep occurs with little notice (brief stall of display, sometimes enough time to click on another app window and bring that forward before the screen goes dark), and 95% of the time the computer wakes up after hitting the spacebar. The other 5 % of the time the display reappears but the entire OS is frozen and usually requires unplugging the power cable. There are other symptoms in the Finder - more below. Once in a while the fan revs up like a WWII fighter plane taking off from a carrier, but this is unusual and all the really irritating stuff also happens without this symptom, which usually stops on its own. Immediately after reawakening error messages are displayed to report that flash drives were improperly disconnected (Tell me about it! This has been the case for several months whether the computer goes to sleep by itself or if I put it there manually.)
The computer seems to go into sleep mode most frequently when not-particularly-demanding graphics (Photoshop Elements and Adobe Reader) and video (QuickTime Pro 7.6.4) apps are running. Turning these off makes nod-offs less frequent but doesn't stop it entirely. When video thumbnails are displayed in Finder windows a lot of time may be required to load the data and this often paralyzes everything else AND this also seems to be a trigger for a nod-off (i.e. QuickTime not necessary to make the computer choke). This is highly variable and some video clips load quickly (< 20 sec), while others take several minutes, and this doesn't necessarily correlate with file size.
Another factor is whether flash drives are connected - these seem to make the nod-offs more frequent AND Finder regularly loses communication to these both while just sitting there and also in the middle of file transfers. A very early 250 MB drive (Lexar - vintage 2004) will always communicate, but different USB2-capable drives all are either unreliable (Lexar 8 GB and KData 4 GB both < 1 yr old) or apparently dead (Lexar 2 GB ~ 2 yr old). The failures may be damaging the drives - they are inconsistent-to-bad at communicating with my MacBook Pro. I know this sounds like the drives are at fault, but there are things which make me suspect the OS (both computers use the same version): 1) different flash drives display the same on-again-off-again behavior AND the 2) the 2 GB drive that hasn't communicated with my Macs in over a month has no trouble talking with my wife's WinXP computer. When communication isn't working with these drives, they do not show up in either Finder or Disk Utility. When the Mac-dead 2 GB Lexar is plugged into either computer and I launch Disk Utility, the initial scan for drives never finishes so I have to force quit. (When they are working, on the iMac the large drives only appear in Finder if I go to User and press Command-uparrow (to go up a directory layer) - in columns display mode nothing appears in the left-hand column.
(The following describes a set of problems I've had a little longer and which may or may not be related):
At times the Finder loses some but not all functions:
1) Sometimes files in the Trash can't be ejected* even when all apps are turned off
2) usually when problem 1) is observed, no keyboard commands work: nothing happens when pressing Command-W, Command-uparrow or Command-N to open a new window. Text typed will not be entered to change filenames (but this can still be done by typing the desired text in TextEdit, copying there and selecting and pasting with mouse commands.)
<* I have downloaded an app for forcing file deletion, but haven't really needed it - the delete option and keyboard commands all return after shutdown and reboot, and there's usually enough annoying stuff going on by this time that that seems the best thing to do.>
Things which I've tried to fix it with so far (not in this order):
- blowing dust out of the back with canned air
- checking temperatures - CPU/GPU showing 72/73, HD bay 51, etc.
- fixing permissions from normal boot
- boot from install disk and running extended hardware test (no problems found during scans repeated several times during the past month)
- fixing permissions and running Disk First Aid from install disk boot
- getting files off the hard drive (was as low as 3 GB free space, currently ~ 35 GB and climbing)
- clearing PRAM
- resetting system manager (name? - hold down power button when reconnecting power cable, etc.)
- Power Saver display and computer auto sleep are shut off (both on "never" - I regularly put it to sleep manually)
- virus scans (Clam XAV)
I realize that this is a kitchen sink collection of symptoms, but these things may be related and if so, OS developers may want to be sure these problems are avoided in current versions. (Yes I will upgrade my OS soon...)

Thanks for checking in, Miriam - sorry to get testy about it.
The iMac's RAM is maxed out (2.5 GB)
Yes, the system log does report overtemp message to Power management prior to shutdown (today's log at end of post)
Where do I find normal temperatures for the system? What are the important parameters to watch and what sort of fixes are possible?
iStat currently shows:
HD 54° CPU 67° GPU 72° Incoming air 38° (???)
HD bay 54° GPU ambient 71° opt drive 49°
==========================================
Console.log was largely full of stuff about a bad flash drive I stuck in as a Hail Mary and failure of communication with a scanner (old HP, driver package installs a program which starts at launch which doesn't show up under Startup Items. Apparently the permission got mislaid, so I fixed permissions and this seems OK now. (Only included that because some of it shows up in System.log and it's not worth focusing on.)
[That all said, there is a software/OS component to the problem and it is graphics-related. The other night I was looking at some flash videos in a series and one in particular repeatedly caused shutdown, while others played normally: domain = jebhost.com /youtube/list.php?q=Henry+8.o&Submit=GO "The Tricycle Thief" only played through once out of about six tries.]
=========================================
System Log Aug 1 (last addition 20 minutes ago)
Aug 1 14:52:46 gerda-kilgores-imac-g5 cp: error processing extended attributes: Operation not permitted
Aug 1 17:07:42 gerda-kilgores-imac-g5 cp: error processing extended attributes: Operation not permitted
Aug 1 17:23:51 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::init(0x46c34c0)
Aug 1 17:23:51 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::free()
Aug 1 17:24:07 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::init(0x3827ec0)
Aug 1 17:24:07 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b6e3000]::free()
Aug 1 17:38:33 gerda-kilgores-imac-g5 kernel[0]: disk1s1: I/O error.
Aug 1 17:38:33 gerda-kilgores-imac-g5 diskarbitrationd[40]: unable to repair /dev/disk1s1 (status code 0x00000008).
Aug 1 17:38:41 gerda-kilgores-imac-g5 kernel[0]: USBF: 31965.839 AppleUSBEHCI[0x360e800]::Found a transaction which hasn't moved in 5 seconds on bus 75, timing out!
Aug 1 17:38:42 gerda-kilgores-imac-g5 kernel[0]: USBF: 31966.868 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:38:42 gerda-kilgores-imac-g5 kernel[0]: USBF: 31966.901 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:38:42 gerda-kilgores-imac-g5 kernel[0]: USBF: 31967. 23 ControlTransaction: control packet 1 error 0xe0004057
Aug 1 17:38:49 gerda-kilgores-imac-g5 kernel[0]: USBF: 31973.868 AppleUSBEHCI[0x360e800]::Found a transaction which hasn't moved in 5 seconds on bus 75, timing out!
Aug 1 17:38:53 gerda-kilgores-imac-g5 kernel[0]: USBF: 31977.938 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:38:53 gerda-kilgores-imac-g5 kernel[0]: USBF: 31978. 2 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:38:56 gerda-kilgores-imac-g5 kernel[0]: USBF: 31981.506 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:38:56 gerda-kilgores-imac-g5 kernel[0]: USBF: 31981.571 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:38:59 gerda-kilgores-imac-g5 kernel[0]: USBF: 31984.264 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:38:59 gerda-kilgores-imac-g5 kernel[0]: USBF: 31984.329 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:39:01 gerda-kilgores-imac-g5 kernel[0]: USBF: 31986. 31 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:39:01 gerda-kilgores-imac-g5 kernel[0]: USBF: 31986. 64 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:39:01 gerda-kilgores-imac-g5 kernel[0]: USBF: 31986.187 ControlTransaction: control packet 1 error 0xe0004057
Aug 1 17:39:02 gerda-kilgores-imac-g5 kernel[0]: USBF: 31987.712 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:39:02 gerda-kilgores-imac-g5 kernel[0]: USBF: 31987.774 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:39:03 gerda-kilgores-imac-g5 kernel[0]: USBF: 31988.139 IOUSBCompositeDriver[0x46bea00](HP Scanjet 5400C Series) GetFullConfigDescriptor(0) returned NULL
Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989. 55 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing getting port status (4)
Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989.178 AppleUSBHubPort: Port 2 of Hub at 0x4b240000 reported error 0xe00002ed while doing clearing port feature
Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989.204 ControlTransaction: control packet 1 error 0xe0004057
Aug 1 17:39:04 gerda-kilgores-imac-g5 kernel[0]: USBF: 31989.479 IOUSBCompositeDriver[0x46bec00](HP Scanjet 5400C Series) GetFullConfigDescriptor(0) returned NULL
Aug 1 17:39:05 gerda-kilgores-imac-g5 kernel[0]: USBF: 31990.455 ControlTransaction: control packet 1 error 0xe0004057
Aug 1 17:39:05 gerda-kilgores-imac-g5 kernel[0]: USBF: 31990.503 IOUSBCompositeDriver[0x36cb380](HP Scanjet 5400C Series) GetFullConfigDescriptor(0) returned NULL
Aug 1 17:49:08 localhost kernel[0]: standard timeslicing quantum is 10000 us
Aug 1 17:49:08 localhost lookupd[43]: lookupd (version 369.8) starting - Sun Aug 1 17:49:08 2010
Aug 1 17:49:08 localhost kernel[0]: vmpagebootstrap: 633665 free pages
Aug 1 17:49:08 localhost memberd[41]: memberd starting up
Aug 1 17:49:08 localhost kernel[0]: migtable_maxdispl = 70
Aug 1 17:49:08 localhost kernel[0]: 92 prelinked modules
Aug 1 17:49:08 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Aug 1 17:49:08 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Aug 1 17:49:08 localhost kernel[0]: using 6553 buffer headers and 4096 cluster IO buffer headers
Aug 1 17:49:08 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
Aug 1 17:49:08 localhost kernel[0]: DART enabled
Aug 1 17:49:08 localhost kernel[0]: USB caused wake event (EHCI)
Aug 1 17:49:08 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe261dcc; max speed s400.
Aug 1 17:49:08 localhost kernel[0]: CSRHIDTransitionDriver::probe:
Aug 1 17:49:08 localhost kernel[0]: CSRHIDTransitionDriver::start before command
Aug 1 17:49:08 localhost kernel[0]: Security auditing service present
Aug 1 17:49:08 localhost kernel[0]: BSM auditing present
Aug 1 17:49:08 localhost kernel[0]: disabled
Aug 1 17:49:08 localhost kernel[0]: rooting via boot-uuid from /chosen: D5C0BAB6-ADB2-3A2A-9DDD-6F971A163F6B
Aug 1 17:49:08 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Aug 1 17:49:08 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@3/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/WDC WD2500JS-40MVB1 Media/IOApplePartitionScheme/Untitled 3@3
Aug 1 17:49:08 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
Aug 1 17:49:08 localhost kernel[0]: jnl: replay_journal: from: 2051072 to: 8100352 (joffset 0xa701000)
Aug 1 17:49:08 localhost kernel[0]: CSRHIDTransitionDriver::stop
Aug 1 17:49:08 localhost kernel[0]: AppleSMU -- shutdown cause = 3
Aug 1 17:49:08 localhost kernel[0]: AppleSMU::PMU vers = 0x000d0092, SPU vers = 0x56, SDB vers = 0x01,
Aug 1 17:49:08 localhost kernel[0]: IOBluetoothHCIController::start Idle Timer Stopped
Aug 1 17:49:08 localhost kernel[0]: HFS: Removed 2 orphaned unlinked files
Aug 1 17:49:08 localhost kernel[0]: Jettisoning kernel linker.
Aug 1 17:49:08 localhost kernel[0]: Resetting IOCatalogue.
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 0
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
Aug 1 17:49:08 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[33]: starting
Aug 1 17:49:08 localhost kernel[0]: Matching service count = 2
Aug 1 17:49:08 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
Aug 1 17:49:08 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
Aug 1 17:49:08 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Aug 1 17:49:08 localhost DirectoryService[46]: Launched version 2.1 (v353.6)
Aug 1 17:49:09 localhost kernel[0]: UniNEnet: Ethernet address 00:14:51:26:1d:cc
Aug 1 17:49:09 localhost diskarbitrationd[40]: disk0s3 hfs D5C0BAB6-ADB2-3A2A-9DDD-6F971A163F6B HiMac /
Aug 1 17:49:09 localhost kernel[0]: AirPortPCI_MM: Ethernet address 00:14:51:7e:85:c0
Aug 1 17:49:09 localhost launchd: Server 3507 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[43]: exited abnormally: Hangup
Aug 1 17:49:10 localhost usbmuxd[36]: usbmuxd-196 built for iTunesNineTwo on May 17 2010 at 13:53:51, running 32 bit
Aug 1 17:49:10 localhost lookupd[63]: lookupd (version 369.8) starting - Sun Aug 1 17:49:10 2010
Aug 1 17:49:10 localhost configd[38]: WirelessConfigure: 88001003
Aug 1 17:49:10 localhost configd[38]: initCardWithStoredPrefs failed.
Aug 1 17:49:10 localhost configd[38]: WirelessConfigure: 88001003
Aug 1 17:49:11 localhost kernel[0]: Registering For 802.11 Events
Aug 1 17:49:11 localhost kernel[0]: [HCIController][setupHardware] AFH Is Supported
Aug 1 17:49:12 localhost mDNSResponder: Adding browse domain local.
Aug 1 17:49:13 localhost kernel[0]: ATY,Aphrodite2_A: vram [98000000:08000000]
Aug 1 17:49:13 localhost kernel[0]: ATY,Aphrodite2_B: vram [98000000:08000000]
Aug 1 17:49:13 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Aug 1 17:49:14 localhost loginwindow[67]: Login Window Started Security Agent
Aug 1 17:49:18 gerda-kilgores-imac-g5 configd[38]: setting hostname to "gerda-kilgores-imac-g5.local"
Aug 1 17:49:20 gerda-kilgores-imac-g5 kernel[0]: AirPort: Link Active: "U2M67" - 001801fb71c5 - chan 11
Aug 1 17:49:20 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup
Aug 1 17:49:23 gerda-kilgores-imac-g5 configd[38]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Aug 1 17:49:23 gerda-kilgores-imac-g5 configd[38]: posting notification com.apple.system.config.network_change
Aug 1 17:49:23 gerda-kilgores-imac-g5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[63]: exited abnormally: Hangup
Aug 1 17:49:23 gerda-kilgores-imac-g5 lookupd[119]: lookupd (version 369.8) starting - Sun Aug 1 17:49:23 2010
Aug 1 17:49:23 gerda-kilgores-imac-g5 configd[38]: setting hostname to "new-host.home"
Aug 1 17:49:26 gerda-kilgores-imac-g5 configd[38]: target=enable-network: disabled
Aug 1 17:49:27 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup complete
Aug 1 17:49:29 gerda-kilgores-imac-g5 mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.1.
Aug 1 18:18:49 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b609000]::init(0x3587f00)
Aug 1 18:18:49 gerda-kilgores-imac-g5 kernel[0]: comlexar_driverLexarFilterScheme[0x2b609000]::free()
Aug 1 18:28:19 gerda-kilgores-imac-g5 kernel[0]: IOSMUPwrController:: OverTemp notification
Aug 1 18:28:19 gerda-kilgores-imac-g5 kernel[0]: Power Management received emergency overtemp signal. Going to sleep.
Aug 1 18:28:21 gerda-kilgores-imac-g5 kernel[0]: AirPort: Link DOWN (Client disAssoc 0)
Aug 1 18:28:21 gerda-kilgores-imac-g5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[119]: exited abnormally: Hangup
Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: posting notification com.apple.system.config.network_change
Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: setting hostname to "gerda-kilgores-imac-g5.local"
Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: AppleTalk shutdown
Aug 1 18:28:21 gerda-kilgores-imac-g5 configd[38]: AppleTalk shutdown complete
Aug 1 18:28:21 gerda-kilgores-imac-g5 /usr/sbin/AppleFileServer: AFPServer::AbnormalATListenerShutDown - clear listener
Aug 1 18:28:21 gerda-kilgores-imac-g5 lookupd[240]: lookupd (version 369.8) starting - Sun Aug 1 18:28:21 2010
Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: System Sleep
Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: System Wake
Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: Wake event 0020
Aug 1 18:28:25 gerda-kilgores-imac-g5 kernel[0]: USB caused wake event (EHCI)
Aug 1 18:28:26 gerda-kilgores-imac-g5 kernel[0]: FireWire (OHCI) Apple ID 52 built-in: handleSelfIDInt - received quads == 0. issuing bus reset
Aug 1 18:28:32 gerda-kilgores-imac-g5 kernel[0]: AirPort: Link Active: "U2M67" - 001801fb71c5 - chan 11
Aug 1 18:28:32 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup
Aug 1 18:28:35 gerda-kilgores-imac-g5 launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[240]: exited abnormally: Hangup
Aug 1 18:28:35 gerda-kilgores-imac-g5 configd[38]: posting notification com.apple.system.config.network_change
Aug 1 18:28:35 gerda-kilgores-imac-g5 lookupd[249]: lookupd (version 369.8) starting - Sun Aug 1 18:28:35 2010
Aug 1 18:28:36 gerda-kilgores-imac-g5 configd[38]: setting hostname to "new-host.home"
Aug 1 18:28:37 gerda-kilgores-imac-g5 mDNSResponder: Repeated transitions for interface en1 (192.168.1.2); delaying packets by 5 seconds
Aug 1 18:28:38 gerda-kilgores-imac-g5 configd[38]: AppleTalk startup complete
Aug 1 18:28:41 gerda-kilgores-imac-g5 mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 192.168.1.1.

For better speed, will a MacPro 2.8 ghz or airbook flash drive and 1.8 ghz?

For better speed, will a MacPro 2.8 ghz or airbook flash drive and 1.8 ghz?

It's going to depend on what you are doing with the machine. If what you are doing is processor intensive, then higher clock speed would give more speed. Assuming though, that the higher speed processor machine is going to have a spindle drive, then if the issue is one that is drive dependent (and a lot of things are), then the MBA will generally be faster.
If you have a machine you are replacing, I'd suggest looking at whether the applications you are now using tend to absorb lots of processor time (are you hitting 100% CPU usage regularly) or spend most of the time excercising your hard drive (drive activity is constant). If the former, the Pro is likely the better option, while if the latter the MBA would likely do better.
Of course, if price is no object just get a Pro level machine with an SSD...

Issues with exporting video from MacBook Pro to flash drive

I cannot sucessfully transfer [export] video taken on my gopro camera, from my MacBook Pro to any flash drive and play them on other computers. For some reason the files are not playable, even with quicktime. They will not play with ANY of my video softwares such as divx or any AVCHD software on a windows computer. I need to make a presentation for a club trip in a few days! Can any one please suggest what is wrong? They play on the Mac using Flip player but not quicktime!
Oh, and I don't have issues with transfering or exporting Jpegs or other photo formats. Only video.
Message was edited by: gmob25

hmmm.. the files from GoPro are already mp4 format. The Flash is already FAT32, brand new 16gig...
I am new to Macs but have no problems with PC's. I suspect that because the files are exporting as shadowed files which won't play and are very small kb files, yet they are actually in excess of 140 mb each that it might have something to do with the iphoto software? That's where the pics and video are, they imported to there by default, not to a folder in the home folder [which is where I would have expected them to be]
By the way, the GoPro is already in mp4 format so it is easy when transferring to computers. No need to convert. I tried converting them to see what the outcome might be, and none worked! I tried every format I could find using Video converter ultimate software, which is excellent.
And the problems began when quicktime wouldnt play the file, the screen was black.

My turn to post a question, USB Flash drive hard lock issues

So not sure if anyone here will be able to help me. Maybe someone from GS has run into this issue, or someone with tech experience can help. The following is from my post on another forum:
This issue has really been bugging me. For the last year I've been having an issue with every version of Windows (XP, Vista, Windows 7). When I insert a flash drive the system will work just fine. When I move a single large file to a flash drive it'll work fine, when I move small files or read small files from a flash drive my entire system hard locks.
Everything freezes, I hit reset, it asks if I want safe mode, then back to the desktop. There are no errors in the error logs. Reliability monitor doesn't show any related issues.
Being of a technological nature I booted into Ubuntu. Everything works perfectly. Put the drive on my hackbook, and everything worked perfectly. OS X, worked perfectly. Tried it on my girlfriend's Vista laptop, worked perfectly.
This issue happens with anything that is detected as a portable storage. It happens with my memory card reader, my flash drives (sandisk, pny, kingston and sony) as well as with my sandisk sansa and iriver mp3 players, but when I set those up as MTP devices they work perfectly.
I have enabled and disabled legacy USB support, re-installed with slipstreamed SP1, xp sp3, vista ultimate without sp1, and the most recent beta of windows 7. Every time I figured it was related to some other USB device, but it's not. Last night I reloaded Vista (without a service pack) and before I installed anything I put a flash drive in and tried transferring some files to it. Hard lock, no other USB devices plugged in, let alone installed.
Specs:
AMD Athlon 6400+
MSI K9A Platinum
2GB Corsair XMS2
9600 GSO 512MB
This is a major inconvience. Putting files on a flash drive should be the easiest thing in the world, not something that should force me into a different OS. Please help!
Give a man a fish and he'll eat for a day, but hit a man with a brick and you can have all his fish...and his wife!
My views may not represent the views of my employer, Best Buy.
Solved!
Go to Solution.

You're welcome.
According to MSI's website, there are multiple ways to flash the BIOS. Here are the links to their documents on the alternatives.
How to flash the BIOS CD
How to flash the BIOS Flash Drive
How to upgrade BIOS using MSI LiveUpdate Utility
This page shows all of the BIOS updates available for download for the K9A Platinum. Probably best to go with the latest release.
I don't have any MSI products but it looks like LiveUpdate might be the easiest since it works from inside the operating system. If that will not work for you then I would use CD. They're easy to make bootable following the guide above.
Hope this helps you.
Jacob|Web Planner | Best Buy® Corporate

USB Flash Drive issues, FAT and Windows, Help!

Here's the deal:
I have a flash drive, I formatted it in FAT because it needs to be used on my Mac (Snow Leopard) and Windows. When I format it, it adds 2 or 3 other partitions like 200MB. BUT does not show it in Disk Manager or in Finder. I can read and write to the drive on my Mac, and it works (Mac thinks it's FAT). When I go to Windows it says it needs to be formatted. So after a leg-breaking experience in XP to reformat it as FAT, I can't just drag and drop folders into it. If I drag a folder to it it gives me an error code -36. HOWEVER, I can make a new folder on the drive (CommandShiftN) and drag files into the new folder. What the heck? Never had these issues in Leopard. What is the issue? Is this just Snow Leopard or is something screwed and I need to reinstall? Help. Thanks in advance.

1) Open Disk Utility.
2) Click your flash drive.
3) Click "Partition" tab.
4) Change "Volume Scheme" drop down box to 1 partition.
5) Change format to FAT.
6) Click "Options" button.
7) Change partition table from GUID to Master Boot Record.
8) Click Apply.
All done.

Flash drives and sleep issues

I'm not sure if this is a Tiger problem or a G4 issue, but I'll start here.
I plug 1Gb flash drives into an Adaptec FW+USB2 card in my Quicksilver running 10.4.11 and the computer will go to sleep fine. Read on.
With a SanDisk drive when I wake up the computer it gives me an error message about the drive not having been properly removed, but the computer does wake up and the drive icon is still present and the drive appears to be okay. Apart from having to click to remove the warning message nothing seems to be the problem. Okay, I can live with that.
I do the same thing with an Imation 1Gb flash drive and the computer will not wake up. I have to use the small reset button to reboot the computer.
Both drives are FAT16 format because I use them to regularly transfer files between the Quicksilver and a Windows machine. The only difference I notice between the drives is that when I use the Imation drive a file or folder or something named "EA" briefly appears in the Finder window where all the regular files are listed. There isn't any icon and there's nothing under date, size, or kind. If I click on the EA it disappears, but reappears each time I attach the drive.

Update and answer my own question.
I re-formatted the Imation drive as FAT16 (what is was already) using disk Utility and the strange file has disappeared. Must have been something to do with the factory formatting.
I also read that the only thing to do about Flash drives and post-sleep kernal panic is to make sure you disconnect the drive before sleep. Either that or get a card that will identify a flash drive as being attached and prevent sleep, or to disable sleep mode.

I am having an issue with a USB flash drive.

Hello, I am having an issue with a USB flash drive. I have a 2012 iMac OS X 10.9. Drive keeps on disconnecting after about 30 seconds. I tried to reformat through Disk Utility but doesn't allow me to verify or repair as it disconnects. This same drive works fine on Windows machines. I tried all USB ports but all give the same issue. Message is: "Disk Not Ejected Properly. Eject "No Name" before disconnecting or turning off." When I attempt to copy data from the disk it comes up with the message: "The Finder can't complete the operation because some data in "" can't be read or written (Error code -36)". I believe the solution for this error is to format the drive but as mentioned this function doesn't work. I need to copy data from a Windows machine to my iMac. Any suggestions with this is appreciated. Thanks!

I went back to a Windows machine, formatted it to NTFS (so lost the data but had a backup), recopied the data. Went back to the Mac but same issue happened after I tried copying the data "Disk Not Ejected Properly - Eject " " before disconnecting or turning off." One of the USB ports didn't detect the 32GB flash drive at all. And disconnected on another one.

Flash drive + speed issue

Similar Messages

Maybe you are looking for