Flash Drive Won't Eject as a Whole

My Computer (Windows 8) won't let me eject my flash drive in one piece. It works fine on the other computers (Windows 7 & XP) in my house. When I click "Safely Remove Hardware", three buttons appear:
Cruzer Micro [faded & not clickable]
> - Eject Removable Disk (F:)
> - Eject Removable Disk (G:)
When I eject both clickable links, the light on my flash drive doesn't turn off, but the "Safely Remove Hardware" link shows:
... [faded & not clickable]
Any way of fixing this? Thanks.
P.S.
I cant upload images of this without verification.

P.S.
I cant upload images of this without verification.
To expedite this you can add a post to this verification thread.
https://social.msdn.microsoft.com/Forums/en-US/009b33a8-c6af-4525-b27d-cc9ded6c39d4/verify-your-account-27?forum=reportabug
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

Optical drive won't eject and can't power off from Apple menu!

I have a Quicksilver that has almost always acted great but ever since I physically moved the machine to another room I've been having intermittent problems. Here's a quick summary:
-Overall more sluggish performance
-Occasionally the optical drive won't eject and I have to restart the whole machine. (I did replace the drive a couple years ago but have never had any problems until now).
-I can no longer shut down/restart from the apple menu, i have to push the power button in.
I used to get device removal error messages at inappropriate times but that seems to have stopped since I reseated my USB 2.0 card. Here's a list of the other remedies I have tried:
-Repair permissions
-Make sure all cards/RAM seated properly
-Replaced PRAM battery (year was displaying 1970)
-Ran DiskWarrior
-Re-imaged entire boot drive
I can't remember if I've tried zapping the PRAM because this problem has been going on for about five months. None of this was an issue before I carted the machine into another room so hopefully I haven't dislodged anything. Also, I notice a lot of static build-up in the room despite the hardwood flooring. Perhaps that could be an issue and if so, any suggestions?
I was dreading that it could be my logic board, any advice?
thanks,
Jesse

Well....it may be fine for you to accept an inferior item, not I. I paid for a unit that was supposed to be fully operational and work as designed. I will not accept having to reboot every time I want to put a CD or DVD into my computer! That's like having to restart your car so the headlights work. Even if one doesn't drive at night, you would still expect the headlights to work ANYTIME you want them without the extra steps. I know "where" the issue is and I know "why" the issue is BUT unfortunately, there is not a fix I can find. Between uninstalling and reinstalling drivers and applications and etc. I give up. They will replace my unit according to Lenovo, with a brand new laptop. Should this one have the same issue, I will be disputing my CC charge, and sending the unit back to them for a full and complete refund. I wish I had a copy of WIn8 or Win7 without Lenovo's proprietary software embedded. I bet the unit would work as designed then, but to have them rewrite or add software with hooks directly into the core system is a recipe for disaster. I encourage you to do something about yours also. The more people that ALLOW this "type" manufactured fleecing, the more it will occur.
I guess I will find out just how well this replacement process works.

My disc drive won't eject a disc

my disc drive won't eject a disc. I have tried everything in the manuel. I hear it moving but to no avail.

See if any of the mentioned methods in the following article works:
http://reviews.cnet.com/8301-13727_7-10333570-263.html

USB flash drive won't mount

I have a strange problem with a USB flash drive which refuses to mount on the desktop of my MDD FW800. It registers in System Profiler but not in Disk Utility. I can't get it to mount using Terminal either. The Terminal screen says it has mounted but it doesn't appear on the desktop and I can't access it. However, if I do a restart with the the drive plugged in, it does mount. If I eject it and then try to plug it in again, it won't mount! Very frustrating.
It works fine on my Powerbook and my Digital Audio so it can't be the drive itself that's the problem. Not quite sure when this started but it may have been after I installed a PCI USB2.0 card (a Ratoc Rex-PCIU3). The card itself works fine with other USB products and I don't have any deep sleep problems with it either. I'm stumped.
Any suggestions anyone?
Alex
G4 1.25GHz Dual MDD FW800; G4 Digital Audio; Powerbook 800MHz DVI Mac OS X (10.4.8)

Hello rickame
Click on the desktop then go up to the menu bar and select Finder / Finder Preferences / General and make sure the box's are checked for Hard disk, External disks, etc.. then reconnect the drive. If you still don't see it on the desktop it may have been improperly disconnected from the iMac while mounted, look to see if it show's up in Disk Utilities and the System Profiler on the USB bus. If you are plugging it into the keyboard, try one of the USB ports on the back of the iMac or a powered hub. There also could be a conflict with other USB devices, try ejecting and disconnect things like an iPod, a printer/scanner or camera, then restarting the iMac and connect only the Flash drive.
Dennis

Usb flash drive won't mount in disc utility

running mountain lion on new imac .... usb flash drive was working, the next hour inserted it again and it doesn't show up in "devices". Opened disc utility - it shows up there but won't mount and all the "verify disc" and repair disc" functions are greyed.
Same result when I insert it into my macbook.

Did you put it in another computer and save data to it since it last worked? did you properly eject the disk?
sounds like you need to reformat the flash drive
If you need to save the data , plug it in to a pc and see if you can copy to hd.
Then take to your Mac and format it in disk utility. I recommend using windows format.
Then plug in to your PCM and get the files.
Then.. Eject the USB disk, don't just pull it out. Take to your Mac and it should mount

External Hard drive won't eject.

hi, im new to the boards. just having an issue with my new external hard drive. everytime i use it or i use my cf card reader which is firewire it won't eject either. i've read there are special commands to go in and see what applications are running and i've tried using disk utility to eject the harddrive. nothing seems to work. ive got all my photos from jobs on this harddrive and im worried that by pulling the cord or switching off the device is eventually going to render all my data corrupt or potentially erase it all. if you know step by step instructions to putting commands in to eject these things it would be of great help. im on 10.3.9 ibook g4.
the error is basically telling me the drive is still in use and can nnot eject. not sure why because there are no other apps running?

Well i think i figured out what was causing the issue. i had a jpeg in the trash. i tried to delete it but it states an error message that the jpeg is being used in another application. so i pulled it out of the trash then plugged my external harddrive back in and the tested it to see if it would eject properly and it did! so now i just need to figure out how to delete that jpeg? so the fact that this jpeg is somehow tied up in an application was causing my card reader and external harddrive to not eject properly? strange. thanks for the tip though. appreciate your input.

Flash Drive Won't Mount Except At Startup

Just bought a little 1Gb USB Flash drive which is USB 1.1 compatible. I want it for transferring files back and forth between my OS 10.4 G5 at home and the old blue and white G3 (OS 9.2.2) I have to use at work.
Trouble is, the G3 won't mount the drive unless it's inserted before startup. Apple System Profiler knows it's there when I put it in one of the USB slots on the back of the computer or in the spare slot on the Macally keyboard, but in neither case does it mount. I've looked at the USB events log in System Profiler and it registers the device being inserted and its call on the USB Mass Storage driver like this:
13436.785: [ 75579098]: Driver - Hub Driver - Device found, calling USBHubAddDevice. Port 3
13437.266: [ 75580125]: Expert - LoadClassDriver: USBCompositeDevice1.5.6 - calling driver initialize routine... 0
13437.267: [ 75580125]: Expert - LoadClassDriver: USBCompositeDevice1.5.6 - driver initialization completed 0
13437.578: [-1744497139]: Expert - LoadInterfaceDriver: USBMassStorageDriver - calling driver initialize routine... 0
13437.580: [-1744497139]: Expert - LoadInterfaceDriver: USBMassStorageDriver - driver initialization completed 0
So there's nothing there that says "fail" there unless that's what the zero at the end of each line means.
If I shut down the computer, insert the drive then start up, it shows up on the desktop no problem. It won't show up again if I trash and remove it though.
However, a graphite G4 in my office, which also runs OS 9.2.2 and seems to have an identical system install, will mount the drive with no problem on any of its USB ports.
Is this a case of the G3's USB ports being underpowered and there's no way round it, or is there a fix out there somewhere?
G3 Blue & White Mac OS 9.2.x

However, a graphite G4 in my office, which also runs OS 9.2.2 and seems to have an identical system install, will mount the drive with no problem on any of its USB ports.
Try this: Copy all of the extensions on the G4 that have USB in their names into the Extensions folder on the G3, replacing the USB extensions that are there; then restart and test again. Some of them may be older or newer versions than the ones on the G3 now, and that can make a difference. Note that in OS 9.x, it isn't always the newer versions of the USB extensions that work better.
Also see this user tip from Apple employee Joerg Weise. In it he lists 6 USB extensions (with version numbers) that can often resolve USB problems in OS 9, even under circumstances different from those described at the beginning of his comments.

HP Envy 15 Optical Drive Won't Eject Disc

I tried to burn a DVD and loaded a DVD-R into the optical drive. Burned the disc, now the disc won't eject. I try restarting the computer and going through Computer to eject, and nothing. It sounds like it tries to eject, fails, takes back in the disc and runs it. This is definitely a problem, considering I'm a filmmaker and need to produce this DVD soon.
Please tell me I don't have to wait for an HP tech to take my computer for a week and a half to fix my brand freaking new notebook that I dished out over a thousand dollars for. This kind of thing is infuriating. And it seems others share this problem. So I wonder why it wasn't fixed.
Thank you in advance for all the help.

Hi,
Please provide us the complete model of your system along with the operating system, so that we can assist you in a better way.
How to locate model number:
Notebook:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00033108
Regards,
=======================
I am an HP employee.
If my suggestion was helpful, you can thank me by clicking on the "Kudos" button!
If my answer solved your problem, please feel free let the community know by clicking the "Accept as Solution" button!!

Flash drive won't mount on iMac but mounts on all other computers

I have two new PNY 8GB flash drives and both work on a Windows 7 laptop and two different Macbook Pro computers. One Macbook is running 10.6 and the other is running 10.7. Two other flash drives work just fine on the iMac but these PNY sticks do not.
I have restarted the iMac with and without the sticks plugged in.
I have tried all USB ports.
I have tried Disk Utility but I do not see anything on the left.
I have look in /Volumes and I don't see the USB stick.
What am I missing? Why won't it work on the iMac but works on the Macbooks?

My other USB memory sticks, an iPhone, and two iPods work normally plugged into the USB connectors on the iMac. It is just this one brand of USB sticks that don't work on the iMac BUT the same sticks work on two different MacBook Pro computers and even a Windows 7 computer.

Combo Drive Won't Eject Discs

My 1G MacBook that just came home from being repaired by Apple won't eject my installation disc. I'm downloading updates for my MacBook at the same time but I don't know if that's why it won't eject. Is there a problem with my combo drive?

Never mind. I was using a program that required the disc and I thought the installation was done.

DVD Drive won't eject!!!

I was transferring some files from a dvd I had burned and now it won't eject the disc. When I press the eject button, it ejects, but before any of the disc comes out, it automatically reloads the disc. I've tried restarting the computer, even holding down the eject button when the computer boots up. But in the end, it's the same result. I'M nearly desperate to take it in to be worked on. what should I do????????

This is quite interesting, bear with me.
Apple reseller removed the dust guard because he suspected that was fouling the disc. However he returned the laptop to me minus the guard so there was a great big hole in the side of the case. I complained to Apple and they agreed it should not have been removed without my say so. Apple do not replace this part as its part of the lower case, unless you (me) pays for this repair, (which I find strange as the part was easily removed),
Long story short the lower case is being changed free of charge to enable the dust guard to be fitted.

Flash drive won't open, or I'm not seeing it! HELP

I have a flash drive plugged into the correct USB port on my iMac .. but it does not automatically open on my desktop, and I can't find where to locate it! I need to ultimately copy the content from the flash drive onto either a CD or a file that I can then upload to DropBox and share. HELP

By default, the Mac OS does not show mounted drives on the Desktop but you can easily change that. Make sure your can see the word "Finder" at the left end of your menubar. Click the "Finder" menu and find "Preferences."
In the "General" tab of Finder Preferences, check all the boxes in the upper section (the ones I have outlined in red):

My flash drive won't let me delete or add files to it

I use a flash drive to bring work between my Mac at home and the Mac at work. It has a lot on it, but it is not full. I can open it and get files from it, but I can't delete files from it or add any more. I tried to duplicate it on a desktop and it started and then stopped saying I didn't have permission finish the operation. I have tried the "Move to trash" menu on 3 different Macs. One, a PPC G4 with Leopard, another a Core two duo with Leopard , and a 2011 MBP with Snow Leopard.
It is a 4GB Lexar drive.
Any help sure appreciated.

Forestman wrote:
I can open it and get files from it, but I can't delete files from it or add any more.
The drive is probably formatted as NTFS (default Win file system). Without additional software, Mac OS X can only read NTFS. You need to re-format the flash drive with Disk Utility. If you're only going to use it with Macs, format it as JHFS+ (Mac OS Extended Journaled). If you're going to use it with Macs and PCs, format it as FAT32 (MS-DOS FAT). Formatting it will destroy all data presently on the drive, so back it up first.

My external drive won't eject. should I shut down my computer? It says if I force eject, I might lose info stored!

My exernal drive will not eject. Should I shut down my computer? It says if I force eject I might lose info!

Hey I typically have this problem as well. For starters what steps have you went to to eject the drive? Have you just done it from finder or have you gone to the Disk Utility and tried to eject from there as well? If not then I would recommend this first. I would also recommend before doing anything to save any neccessary information that was placed on the drive locally if possible.

Lexar flash drive won't show up on Macbook Air?

I've been using my Lexar Twist turn flash drive on my Macbook Air for a while now and it has been working perfectly. The last time I've used it without trouble was around May - June. Just recently I plugged my flash drive in and it didn't pop up... as if nothing was inserted. I've plugged it into my PC as well and it worked fine. I've tried checking the disk utility but it didn't show up in there either. Help.
My Macbook Air is an OS X Mountain Lion 10.8.5 if that helps...

Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.desktop.plist and com.apple.finder.plist. Move the .plists to your desktop.
Re-launch Finder by restarting and test. If it works okay, delete the plists from the desktop.
If the same, return the .plists to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Flash Drive Won't Eject as a Whole

Similar Messages

Maybe you are looking for