Flash Encoder As Instant relay Software

I am new to Flash Encoder. I am wondering if , with the new DVR controls on Version 3, if I can
record live video to a file
pause the recording/encoding
rewind
then somehow play the segement full screen on my computer
Any help is deeply appreciated
Thanks Hugh

Oops
Meant Instant Replay

Similar Messages

  • WCV200 Camera using Adobe Flash Encoder

    Hi all,
    I have searched the forum for this topic and come up with no treads. 
    Is it possible to use the WCV200 camera with  Adobe Flash Encoder? I am hopeing to use this to feed the stream into the Flash Server so I can put it onto a website. 
    Thanks,
    Andy

    I believe this can’t be done. You can only use the camera using the web utility or the camera utility software to view the video of the camera especially via live feed.

  • Flash encoder install problem

    When I tried to open the Flash Encoder, it tries to install
    the encoder software and searches and cannot find an Encoder.msi
    file. I point it to the installation cd but that doesn't work. Any
    suggetions? I have Sutdio 8 and everthing else seems to work fine
    but the Encoder.

    You need to override the auto update feature from outside of
    flash.
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=16701594&pss=rss_flashplayer_16701 594
    Use their uninstaller again. Then make a file with
    notepad(Start>Run, notepad or notepad.exe), call it mms.cfg and
    put one line in it with the following text:
    AutoUpdateDisable=1
    and put it in c:\Windows\system per that page I linked to:
    For player versions prior to Flash Player 8, store the
    mms.cfg file in the following location depending on the operating
    system:
    Windows NT, 2K C:\WINNT\System32
    Windows XP C:\WINDOWS\System32
    Windows 95, 98, or ME C:\Windows\System
    After you uninstall, you may want to grab CC Cleaner and use
    that to remove just the flash data, but dont mess with the other
    stuff.

  • I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

  • S video with Flash Encoder 3.2

    We stream a great number of events for clients around the country.  We have just transitioned from Windows Media Encoder to Flash Encoder 3.2.  Is there any work around for those clients of ours that use S video out of their cameras.   Flash Encoder does not seem to work when the video output is through an S video plug.  In Windows Media Encoder you could configure the encoder for eitehr composite or S video.  I do not see this option available in Flash Encoder 3.2   Am I missing something?  Any help would be much appreciated.
    Thank You

    The option for using s-video or composite should be done on the grabber-card in youre computer.
    widthout more information about youre setup, my only tip for you would be to start FMLE, select youre grabber card, and click on the button to the right, with an wrench on it to change settings on the card.

  • Get instant on software

    Hello there.
    After a crash, I had to change my hard disk and reinstall all software (from HP drivers and software support web).
    However, the instant on software (to boot the touchsmart faster and lighter than using Windows) doesn't work. It seems it is not installed properly.
    How can I get the sotware of this light operaring system again?
    Thnak you in advance.

    Hello again unomas21,
    Thank you for responding to my post requesting additional information. I have gone to the HP TouchSmart tm2-2150es Notebook PC Product Specifications page and it does list HP QuickWeb as software that comes with your computer. Unfortunately, when I go to the HP TouchSmart tm2-2150es Notebook PC Drivers page there is no download for the HP QuickWeb software. There is for HP Quick Launch, but that is different software does something completely different.
    Now as I said sometimes the only place to get the HP QuickWeb software that will work on your computer is from the download page or your recovery partition. There is no software for you to download from your drivers page, but you may still be able to download and install it from elsewhere. I am providing you with a link to the HP QuickWeb Software download page for systems running Windows 7 64-bit. This may not work on your system, but it is worth a try.
    I am also providing you with the HP Support document: Set Up and Use HP QuickWeb Applications, just in case it does work as this will help you get it set up.
    I hope this is successful for you. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Intraoffice instant messaging software for Windows and Mac

    Can anyone recommend instant messaging software between Mac and Windows platforms?
    My employer doesn't want to use the traditional IM clients — AIM, MSN, etc., — for security reasons. He'd like something that would only connect members of the same LAN.
    Thanks.

    I would suggest Jabber, it has a lot of features and you are not restricted to one IM client. Also supports iChat.

  • Is there a software like flash player for ipad.what software do I exactly need in order to play videos from websites?

    Is there a software like flash player for ipad.what software do I exactly need in order to play videos from websites?

    NKafafi88-
    There may be a couple Apps that may help, but I understand they don't work very well.  The best solution would be to contact the owners of the websites and let them know they need to update their site.
    The alternative I use, is to download the problem video onto my computer, and convert it to M4V or MP4 format using a program like HandBrake <HandBrake>.  Then it can be added to iTunes and synced with the iPad.
    Fred

  • Flash Encoding Server Notifier Issue?

    Just installed and managed to get the Flash Encoding Server working within a minute the only issue is with the Web Notifiers. The IIS error logs shows that the server is not replacing the token %destinationname%.  I have checked the spelling 4 times and nothing. It works for the other tokens. I need help ASAP.

    There is not a developer version of the Flash Media Encoding
    Server available for download.

  • Flash is a poor quality software

    Guys, after just short time (luckily) that I had to work with flash, during which time flash show what its capable of (not a positive thing), my thoughts on it.
    Flash is extremely poor quality software. Incidents working with flash involved
    1. thumb doesn't show up on slider when I click button once, but shows up when I click this same button twice. (code: thumb.visible=true), that all there was to it!!!
    2. movie clips moved out of scene are showing on scene anyway
    3. Simply copying the aforementioned slider and placing it on first frame on main scene brakes totally unrelated code somewhere else. But pasting the same slider on second frame doesn't brake that code anymore! Needless to say that slider has no code whatsoever so it couldn't possibly reference anything in my scene anyway!
    What else? Yesterday I was happily working till lunch. Saved my work, went, had a lunch, came back, try to open my file, nope, not so fast flash tells me that this is incorrect format of a file!!! I couldn't believe what I'm seeing. I've never during my 15 years of working as a programmer came across software which couldn't open file saved by itself. Apparently, this is very common problem with flash: Re: I cannot open FLA files in CS5 "UNEXPECTED FILE FORMAT" help!
    Luckily I've had save this file the day before so I've lost only half a day's work.
    Another phenomena, during debugging flash goes through lines of code and at last line throws error that child mustn't be null, which is really bizarre because on previous lines I've had that child object and flash didn't complain at all:
    child = new Item();//goes through this line
    child.setUp("myChild");//goes through this line
    addChild(child);//throws ERROR that child mustn't be null.
    Another incident, two buttons identical class, all is different is text on them, one says play, the other one says settings. First button do not respond to mouse events, specifically to mouse_over event, second button behaves correctly. Situation got resolved that I've added another, dummy button and moved it out of stage. Now both original buttons behave correctly!!! How is this possible???
    Another incident from before yestarday. Same slider. First frame, two copies of it. First one (top one) after publishing looks as it looks in editor, second looks completely different! parts are scaled up, far away from each other, total mess!!!WHY??? I simply put one slider from library and copied it once. Same frame, same slider, no code involved whatsoever and despite this flash messes things up.
    Another incident with slider. The same slider copied from one frame to other. One works perfectly on one frame (that is you can drag the thumb and the thumb follows your mouse), paste EXACT!!! copy of this slider on different frame and the slider becomes unresponsive!!! Un effing bellievable!!!!
    Oh, and one more thing, can this software and swfs produced by it be any slower and use more processor power?
    There were also plenty of others smaller annoyances how flash behaves, or why doesn't behave correctly. I'm so glad that will not have to work with this software anymore. It is so bad. And it is Flash CC. Unbelievable.
    So I suppose, my question is, why is flash so poor quality software, despite the fact that is on the market for so many years?

    Are you serious?
    Are you genuinely serious?
    Are you really...
    How can anyone think that this, out of box should compile? How?!?
    The child isn't declared, Item class isn't defined, how can you think that this could/should compile? How?!!!
    As I've said in one of my previous posts, this is simply snippet of my code with those problematic lines. And why I have problem with this is, again, as I've said previously flash does go through two lines with child variable, but throws error (during debugging) at the third line that child variable mustn't be null!!! while just before second didn't have any problems with referencing this variable, just one line previously.
    And no Amy, you are wrong saying that I've nulled this variable somewhere.
    If you look at the code (from one of my other posts):
    //[begin of example]
    //some function's body
         child = new Head_mc(); //Head_mc is a movie clip
      trace("child: " + child);//outputs some name of this child
      child.setUp(aHead);//goes through this line fine while debugging
      addChild(child);//GIVES ME ERROR TELLING ME THAT THAT child MUSTN'T BE SET TO NULL!!!!!!
    if I change this code to:
    //some function's body
        var c:MovieClip = new Head_mc(); //Head_mc is a movie clip
      c.setUp(aHead);//goes through this line fine while debugging
    child = c;
      addChild(child);//No problems, but why is it that this works and the first code doesn't work?
    //[end of example]
    you will see that the only function which could possibly nullify child variable is function setUp, yet this function is called in second example as well as in first and yet first example behaves incorrectly and second example works as expected. Why? What's different there?
    Oh, and @sinious, please mate, give me a favor and don't try to compile it, because it is impossible to compile. But also please note that I mention that the debugger goes through some lines so it must mean that at some point I did compile it first and then started debugging. It does make sense, doesn't it?
    As for working with complicated software/languages?
    Guys, please don't make me laugh.
    Maya, Catia, AutoCAD, 3DMax, Visual Studio, Blender, Photoshop, ZBrush, UDK, UE4, - (except Catia I work on weekly basis, every week of the year (except holidays and weekends that is) with each and everyone of those products), and of course as a language of choice I use C++. How do you think C++ compares with regarding difficulty, complexity, learning curve to as3 do you think?
    Flash (and as3) is a relatively simple but buggy, poor quality and unreliable software. I can say that not because I cannot learn it. I can say that because I've worked with it and experienced it's poor quality and "bugyness" from day one. I also worked with other software in my life, I also do work every day of my life with other software (the above mentioned), and flash simply proves to be of poor quality.
    None of the software I've mentioned couldn't open file it just wrote couple of minutes ago. With flash it happened. Not once now, but two times. And not just to me. Plenty of examples on the web. Guys, please, open your eyes. It didn't happen because I'm a bad/incompetent programmer. It happened because flash is a buggy, poor quality and unreliable software. And companies are ditching flash not because I say it is bad. They ditching it because through their own experience they realized that flash is a buggy, poor quality, poorly performing, unreliable software. That's all there is to it.
    And as for self-congratulatory behavior of yours:
    "Plenty of evidence is here to the contrary so, mission complete"
    What mission did you achieve?
    The one in which you proved to everyone that you don't understand that you cannot compile code snippet which is taken out of context?
    What kind of programmer you are, it just makes me wonder...

  • Flash Encoder and Camera Compatibility

      I'm new to streaming & grateful for any knowledge you have on encoder/camera compatability? I'm looking for the highest quality that is compatible with the Adobe Flash Encoder for a Mac?

    did u get any help with this? if so let me know

  • Adobe Flash Encoder on Windows Server 2003 and SDI inputs

    Has anyone out there successfully installed and run the Adobe
    Flash Encoder on a Windows Server 2003 system?
    Also, will the Flash Encoder accept audio and video sourced
    from an Osprey 2000 capture card using an SDI input?

    Does anyone have any alternate I/O solutions for inputting
    Composite, Component, SDI, XLR? I've beel looking for a rack
    mounted box (preferably) that inputs accepts analog and digital
    formats and outputs a firewire feed that can be input into my Flash
    Media Encoder box (I thought Motu's V4HD fit the bill, but after
    talking to them apparently it will not work...).

  • Hi I want to broadcast recorded video using flash encoder?

    Hi I want to broadcast recorded video using flash encoder, or their is any other way for broadcating recorded media files as live tv?

    Hi,
    You can do server side play of the recorded media file. After that once any one connects to that application, that file will be played as live. Following is the code to do this:
    var streamname="stream_name.flv"; //Name of the recorded media file
    application.onAppStart=function(){
              application.onNCA();
    application.onConnect=function(clientObj){
              application.acceptConnection(clientObj);
              trace("***Connected : "+isConnected);
    application.onNCA=function(){
              trace("onCA "+streamname);
              streamObj=Stream.get("foo");  // foo will be the live stream name
                        streamObj.onStatus = onStreamStatus;
                        trace("here "+streamname.split(".")[1]);
                        switch(streamname.split(".")[1]){
                                  case "mp4":
                                  case "3gp":
                                  case "f4v":
                                            streamPlayName="mp4:"+streamname;
                                            break;
                                  case "mp3":
                                            streamPlayName="mp3:"+streamname.split(".")[0];
                                            break;
                                  case "flv":
                                            streamPlayName=streamname.split(".")[0];
                                            break;
                        trace(streamPlayName);
                        streamObj.play(streamPlayName);
    function onStreamStatus(info){
              trace("Stream "+info.code);
    application.onDisconnect=function(clientObj){
              application.shutdown();
    Anyone connecting to above app will be able to play "foo" as livestream name.

  • HT5655 HI PLEASE I WANT TO KNOW WHY I CANT DOWNLOAD THE LATEST FLASH PLAYER EVEN NOT ANY SOFTWARE

    HI PLEASE I WANT TO KNOW WHY I CANT DOWNLOAD THE LATEST FLASH PLAYER EVEN NOT ANY SOFTWARE EVEN THOUGH I HAVE A BRAND NEW IMAC 10.8.5

    Typing in all capital letters is like shouting and considered rude by some.
    Adobe Flash Player Troubleshooting
    Adobe Flash Player Troubleshooting (2)
    Adobe Flash Player Troubleshooting (3)

  • Flash encoder pro isn't encoding my file at all

    I click add and then I chose the video file which I made on
    my video camera and nothing happens. I am able to change music
    files if I like but that is it. I have a mac power book G4 osx if
    that helps. What can I do?

    With Flash Encoder Pro, do you mean the shipped with Flash 8
    / CS3?
    If nothing happens then it's mostly because the videocodec is
    not supported.
    Try using a normal mov file and see if the encoder
    works.

Maybe you are looking for