Flash Error 1904 possible fix

For those of you getting this error when you try to install
the flash ActiveX control, here is how my smart IT person fixed
this issue.
You first download the flash Active X control.
Make sure IE is closed.
Install it and wait for the error to pop up. Close out the
error window but leave the installer open (don't click finish)
go to start>run and type in
cmd to get the command prompt window.
Then type the following to get you to the correct directory
and register flash so that it will run in IE.
C:\Users\Siamese>cd %windir%\
C:\Windows>cd System32
C:\Windows\System32>cd Macromed
C:\Windows\System32\Macromed>cd Flash
C:\Windows\System32\Macromed\Flash>regsvr32 FlD
C:\Windows\System32\Macromed\Flash>
Open internet explorer and surf to a page that you know uses
flash. Hopefully this will work for you, it worked for me

I had mega problems too. Can also try following the steps in my posting as below after creating a new user account on your computer with ADMIN priviledges also. See my posting on 20/06/2009 22:33 titled "Upgrade Error number 4 and Restore Error 1603 when going to OS 3.0 - Solved"
And turn off any antivirus and firewall software too, before doing so. And also click the Restore Button on the ITunes Summary page which seems to force the iphone into an update. Dont try using the Check for update button. Good Luck

Similar Messages

Errors in error.log – possible fixes?

I have now completed my home server with arch linux, and get everything working like i wanted. :-)
Now i have found some messages within the error log i couldn't find a solution for. It looks like nothing important to me, they sound more like informations than actual errors, but maybe there is some configuration wrong and can be fixed to avoid these messages.
The first one
SP5100 TCO timer: mmio address 0xb8fe00 already in use
occurs during udev on each boot. (I'm running kernel 3.2.8-1-ARCH)
dhcpcd[553]: eth0: sendmsg: Cannot assign requested address
I configure the network via DHCP, and the router decides the ip according to a mac-address/ip-address-look-up-table. I think dhcpcd tries to decide the ip-address in the first place, and fails until the router sends the correct one.
/usr/sbin/crond[613]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
This is obviously because I don't have sendmail installed. Can I configure cron to use Syslog instead of sendmail? So it doesn't checks for sendmail everytime it is started.
Thanks!
Last edited by silentsnake (2012-03-02 03:02:02)

@skanky,
Is it possible that we are using different implementations? That is, I'm using cronie but dcron also provides crond.
From man crond:
SYNOPSIS
crond [-n | -p | -s | -c | -m<mailcommand>]
crond -x [ext,sch,proc,pars,load,misc,test,bit]
and:
OPTIONS
-m This option allows you to specify a shell command to use for sending Cron mail output instead of using
sendmail(8) This command must accept a fully formatted mail message (with headers) on standard input and
send it as a mail message to the recipients specified in the mail headers. Specifying the string off (i.e.
crond -m off) will disable the sending of mail.
-n Tells the daemon to run in the foreground. This can be useful when starting it out of init.
-p Allows Cron to accept any user set crontables.
-c This option enables clustering support, as described below.
-s This option will direct Cron to send the job output to the system log using syslog(3). This is useful if
your system does not have sendmail(8), installed or if mail is disabled.
-x This option allows you to set debug flags.
Last edited by cfr (2012-08-21 22:05:26)

Error 1904 when installing flash player

I'm having an issue getting flash player installed on a
Citrix server running Windows Server 2003. I get the dreaded
"Error: 1904." From what I've read, it sounds like the issue is
with permissions on registry keys. I've gone through these
instructions:
"STEPS:
In the registry find the following keys (if they exist). Then
right
click and grant read/full control to Administrator.
HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash
ShockwaveFlash.ShockwaveFlash.1
(There is NO ShockwaveFlash.ShockwaveFlash.2)
ShockwaveFlash.ShockwaveFlash.3
ShockwaveFlash.ShockwaveFlash.4
ShockwaveFlash.ShockwaveFlash.5
ShockwaveFlash.ShockwaveFlash.6
ShockwaveFlash.ShockwaveFlash.7
ShockwaveFlash.ShockwaveFlash.8
HKEY_CLASSES_ROOT\.spl
HKEY_CLASSES_ROOT\.swf
HKEY_CLASSES_ROOT\.mfp
HKEY_CLASSES_ROOT\.sol
HKEY_CLASSES_ROOT\.sor
HKEY_CLASSES_ROOT\CLSID\{D27CDB6E-AE6D-11cf-96B8-444553540000}
HKEY_CLASSES_ROOT\CLSID\{D27CDB6E-AE6D-11cf-96B8-444553540000}\InprocServer32
HKEY_CLASSES_ROOT\MIME\Database\Content
Type\application/x-shockwave-flash
HKEY_CLASSES_ROOT\MIME\Database\Content
Type\application/futuresplash"
The strange thing is that none of the
ShockwaveFlash.ShockwaveFlash.X keys exist. Everything else is
there with proper permissions.
The full error message is:
"error 1904. module
c:\windows\system32\macromed\flash\flash8.ocx
failed to register. HRESULT - 2147220473. contact your
support personnel."
I'm wondering if I can just create the missing registry keys
by hand and mirror the values found on a working machine. I'd
rather not just try without seeing if it is possible first as this
is on a production Citrix server.
Thanks!

Getting the exact same error...no posted fixes have worked to
resolve to date.

After Effects error: Could not launch Adobe Analysis Server (515) ( 25 :: 101) *POSSIBLE FIX*

Hi. Im New to the forums so sorry in advance if i do something incorrect
Since my Purchase of Adobe CS6, I was not able to use dynamic link, or the plugins that required you to connect to the Adobe Analysis Server (3d Tracker, Warp Stablizer ETC) It would always give me the error
After Effects error: Could not launch Adobe Analysis Server (515)
( 25 :: 101)
Or if i would use dynamiclink
The Importer created a generic error
Through hours and hours searching through the internet, and trying possible fixes, i found possible fixes that might help people with this error.
*Before attempting any of these fixes, make sure you reinstall CS6 Using the Adobe Cleaner*
This guide is for Windows OS Only.
If the error still presists, try these options
-If your windows account is not a administrator, Run Adobe After Affects CS6 As Administrator
-Disable your Anti-Virus and your Firewall
I know you have probably heard this over and over again, but this is mainly the cause of the problem. Some Anti-Viruses even when disabled, go into some sort of one eyed open mode, where it still monitors your computer ever so slightly, so you may want to uninstall the anti-virus. As for the firewall,
1) Go to your start menu search "Check Firewall Status"
2)Then to the left of the window, click Turn Windows Firewall on or off
3)Then tick "Turn of Windows Firewall" on BOTH Home or work network and Public Network.
-Close and Uninstall filtering and spyware programs such as Netnanny and Premiere Opinion. This might be using the TCP Ports that is needed for After effects, dynamic link and adobe analysis server to communicate
-Start up Adobe Analysis server Manually. This can be done by going to C:\Program Files\Adobe\Adobe After Effects CS6\Support Files and running Adobe Analysis server.exe as Adminisrator, Then starting Premiere, After effects, etc.
-If the Adobe Cleaner didnt already, Clean your registry. This can be done with free applications such as CCleaner.
If none of those options work, I would suggest a full format and reinstall of windows.
I hope this would help people with this issue.

captain_astronaut wrote:
I'm running the latest version. Just installed yesterday.
You can download and install the latest version (and older versions) of versions 11, 12, and 13 from Adobe right now. That is why I was asking for the exact version number with decimals. Just the other day, someone said they were running the latest version and they weren't aware that CC was even a thing. They were running version 11.0.3 (which isn't even the latest version of CS6 - it's 11.0.4). That's why I always ask.
captain_astronaut wrote:
I'm on a Mac so I don't have anti-malware, or other security software running.
That doesn't seem like a good idea. While there can't be anything technically referred to as a "virus" on the Mac OS (due to the underlying structure), there can be (and are) malware variants out there that do attack machines running the Mac OS. As Apple products have grown in popularity, developers have been creating more and more malware aimed at OSX.
I certainly hope you at least have your firewall running.
captain_astronaut wrote:
I tried launching Premiere yesterday and it crashed.
This points to a much more serious underlying problem. Thousands (if not millions) of people are running Premiere and After Effects on Macs. What sort of error messages did you receive when it crashed?
Try installing version 12 of AE and the previous version of Premiere as well and see if they run.

Possible fix for errors 11503 and 50

Here's a possible fix for Error 11503 and for error 50.
It worked for me and hopefully it will work for you.
I believe this error is caused by the incomplete downloading of either an update to an app. In my case it was caused by closing the lid on my laptop when I was downloading app updates on a very slow internet connection in a hotel.
Anyway, here is what I did that fixed it completely.
Close iTunes.
Go to this folder : /iTunes/Mobile Applications/Downloads
You'll find tmp files there. Drag them out of this folder to a temporary folder on your desktop. The Downloads folder should now be empty.
Restart iTunes.
All should be fine.
If it is, delete the desktop folder with all the temp files.
If it's not, then I can't help further, but that's what worked for me.

Several possible causes from the info you gave
Battery level low - recharge it for at least 4 hours till the full charge sign displays (2 prong icon instead of lightning icon).
Time to Reset the iPod - Press the Menu and center Button for about 10 secs till the Apple logo comes ON, then let go of the buttons.
your hardisk is starting to give problems, hence the skipping and some song refuse to play. - Do a disk diagnostic - follow this post by tt2.
https://discussions.apple.com/message/17028567#17028567
If you have updated any sofware application in Windows, then follow this Apple support procedure
http://support.apple.com/kb/TS1539
Most likely you have to do all, as the iPod hardisk filesystem would have been corrupted, or else the iPod Reset would bring it to normal operation.
Good Luck!

"Could not load Shockwave Flash" error not solved from common fix.

I am using Google Chrome as my web browser and I am getting the, "Could not load Shockwave Flash" error message. I have googled it and followed the common fix, however it does not fix anything. If I disable the plug-in then it prompts me to install Flash Player when I view videos and if I try to install Flash Player it tells me that I already have it installed, but it is disabled and to re-enable it. I've done about all I can think to do, please help?

You cannot:
-download
-install
-repair
-update
Flash Player for Chrome from here. Chrome uses a proprietary build called PepperFlash. It's modified by Google before they embed it and Adobe doesn't have downloads for it.
You can try the following:
1. Exit chrome, make sure it is not running
2. Using Windows explorer go to C:\users\[user name]\AppData\local\Google\Chrome\User data\Pepperflash
3. Delete the folders you see there
4. Start chrome again.
Notes:
[user name] is your logon name.
In order to access the AppData folder, you need to "Show Hidden Files and Folders" in your Folder Options.
If those steps fail, the ONLY way to repair it is to uninstall and reinstall Chrome.

Crystal Reports 2008 - Error 1904 - DLLs will not register

I have just tried to install Crystal Reports 2008 on a PC which is running on XP Professional 2002 (Service Pack 3) and none of the DDLs will register. I have administrator privileges on the local PC.
I could possibly try to register the DLLs manually but I don't understand why they won't register automatically.
I would really appreciate some assistance with this.
Kind regards, Leeanne
I received the following errors....
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportPromptEMF.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportSourceBridge.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\busobjReporter.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FullClient.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FullClientAddin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FullClientTemplate.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Webi.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\qaaws.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\MetaDataPlugins.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\lovconvertor.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\EnterpriseControls.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FullClientServerAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Xcelsius.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Flash.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\EventServerAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FileServerAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\JobServerAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\DocProcessingServerAdmin.dll failed to register
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\EnterpriseRepositoryAdaptor.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\AuditProxyService.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Discussions.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\WebIntelligence.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CrystalEnterprise_SMTP.dll failed to register
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\DiskUnmanaged.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Ftp.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Managed.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\MDS.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Connection.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Favorites_Folder.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Folder.dll failed to register. HRESULT -2147024769. Contact your support personnel.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Inbox.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\LicenseKey.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ObjectPackage.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Profile.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Publication.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\User.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\UserGroup.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CacheSrvAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\PageSrvAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\SAWebAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CMSAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Calendar.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Event.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Excel.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Hyperlink.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\PDF.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CustomRole.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Powerpoint.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Program.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Agnostic.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\RTF.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ScopeBatch.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Server.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ServerGroup.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Shortcut.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\TXT.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Word.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\AFDashboardPage.dll failed to register
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\AppFoundation.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\InfoView.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CMC.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Designer.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Encyc.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Encyclopedia.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\MyInfoView.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportConvTool.dll failed to register.

Install .NET Framework 1.1 and 2.0 and then any patches Windows has for them.
Install the C++ runtime distribution from Microsoft, search MS's site for it, they have multiple links for each OS.
Download the latest Microsoft installer, you can go to MS's web site to get it.
Check with your IT department to make sure they have not pushed out a "modified" administrator Profile to your PC. Open up regedit.exe and confirm you can change any key in Current User and Software and anything. Be sure to copy the original so you can right the value back and the usual warnings about modifying the registry.
Download CR 2008 SP1 full build: https://smpdl.sap-ag.de/~sapidp/012002523100006555792009E/cr2008win_sp1.exe ( requires and un-install of existing CR 2008 if any are on your PC )
Before running CR 2008 Install SP 3: https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
You could also try Disabling DEP, right click on My Computer, Properties, Advanced tab and Data Execution Prevention and make sure it's set to windows Processes only. Requires a re-boot if changed.
Disable any and all anti-virus and local firewalls, copy everything local and disconnect your network cable so you don't get anything nasty and try again.
If none of the above works then try someone elses computer, your system may be beyond repairing and could require an FDISK and starting all over.
Thank you
Don

Installation error 1904

I am trying to install Contribute and I keep getting an errro
1904 "FlashPaper installer error 1904:flash.ocx failed to register"
I have tried all of the options on the TechNote and I still get the
same error. Has anyone run into this before and how did you fix it?
Thanks,

are you installing this on Microsoft Vista or Intel-based
Macs? what OS are you running?

When I push start a question mark comes on flashing how can I fix it

Please help me fix my Mac Pro

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Flash9 Error 1904 Insoluble Problem

Each time I try to install Flash, I receive the following
error message:
Product: Adobe Flash Player 9 ActiveX -- Error 1904.Module
C:\WINDOWS\system32\Macromed\Flash\Flash9d.ocx failed to register.
HRESULT -2147220473. Contact your support personnel.
My permissions are exactly as they should be, but I ran
subinacl.exe anyway. I have uninstalled and reinstalled countless
times--several times with my firewall and virus scanner turned
off--and I have also registered the .ocx file manually
(successfully, according to the message I received). I have used
ERUNT to restore my registry to a date before Flash went wonky (a
little more than a week ago).
I have tried several different installer links. Some of them
refuse to work because they say there is a newer version available.
When I check IE7's add-ons, there is no Active-X control for
me to enable.
I'm at the end of my rope with this, so I hope there will be
a fix for it soon.

I am a network administrator on my organisations domain. We
recently had the 1904 error on a number but not all our machines
after rolling out the flash9 active x msi from Adobe.
After many fustrating hours of research and testing. I looked
at adobe articals about permissions on the Shockwave.Shockwave
registry keys and registering flash9.ocx with regsvr32.exe and had
very little luck.
In the end I created .reg file containing certain keys and
sub keys (the subkeys is partly what fixed it for me) from a
working machine. And copied the full contence from the
c:\winodws\system32\macromed\Flash from the working machine to a
usb drive.
I then deleted the contence of the
c:\winodws\system32\macromed\Flash on the machine with the error
and replace them with the copy I took from the good machine.
I then ran the .reg file I created.
This fixed all our machines.
I have attached a copy of the .reg code below, First backup
the registry and then if you copy the text below in to a txt file
and then rename it to be .reg, and double click it to load in it
into the registry.
Then if you go to a web page that uses flash such as a
youtube video it will all work fine.
----- copy these files first from a working machine.
--Flash9.ocx
--Flash9f.ocx
--flash.ocx
--FlashUtil9f.exe
--KB913433.inf
--UninstFl.exe
------Here's the reg file
Windows Registry Editor Version 5.00
--0
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash]
@="Shockwave Flash Object"
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash\CLSID]
@="{D27CDB6E-AE6D-11cf-96B8-444553540000}"
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash\CurVer]
@="ShockwaveFlash.ShockwaveFlash.9"
--1
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.1]
@="Shockwave Flash Object"
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.1\CLSID]
@="{D27CDB6E-AE6D-11cf-96B8-444553540000}"
--3
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.3]
@="Shockwave Flash Object"
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.3\CLSID]
@="{D27CDB6E-AE6D-11cf-96B8-444553540000}"
--4
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.4]
@="Shockwave Flash Object"
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.4\CLSID]
@="{D27CDB6E-AE6D-11cf-96B8-444553540000}"
--5
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.5]
@="Shockwave Flash Object"
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.5\CLSID]
@="{D27CDB6E-AE6D-11cf-96B8-444553540000}"
--6
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.6]
@="Shockwave Flash Object"
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.6\CLSID]
@="{D27CDB6E-AE6D-11cf-96B8-444553540000}"
--7
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.7]
@="Shockwave Flash Object"
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.7\CLSID]
@="{D27CDB6E-AE6D-11cf-96B8-444553540000}"
-8
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.8]
@="Shockwave Flash Object"
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.8\CLSID]
@="{D27CDB6E-AE6D-11cf-96B8-444553540000}"
--9
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.9]
@="Shockwave Flash Object"
[HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash.9\CLSID]
@="{D27CDB6E-AE6D-11cf-96B8-444553540000}"
Regards,
Jonathan Ford

Desktop Manager Install Error 1904, nothing resolves...

I have been having the following problem the last few days. On my work desktop (WinXP x64) I installed the DesktopManager software without hitch, but on my home desktop (WinXP Pro SP3) I also keep getting the error message:
Error 1904.Module C:...GW.dll failed to register. HRESULT -2147220473. Contact your support personnel.
I am also getting the same error message for gwapi.dll, desktopsetup_pb.dll, and syncAE_pb.dll.
I am a very technical person so I had no qualms with trying the crackberry fix, but it didn't work. I was able to register all of the modules after the reset, but when I would open up Desktop Manager it would never connect to my Curve 8320 vis USB or Bluetooth. With Bluetooth it would recognize the phone and it would even pop up a message saying that it had "detected the device". It would ask if I wanted to connect and I would say yes and then nothing would happen. Another 30-60 seconds later it would pop up the same message saying it detected my Blackberry and asking if I wanted to connect. After about the tenth time of this loop I closed out the Desktop Manager. I uninstalled the software and deleted the program folders and then logged onto the "Administrator" account (my account is also an admin acct, but I logged onto the default admin account that is labeled "Administrator" by Windows). Upon logging into this account, I attempted to upgrade the Windows Installer 3.1, but it told me that I have a newer version and couldn't do that (WinXP SP3). So, I registered the atl.dll and tried installing the Desktop Manager software again (I'm installing v4.6 w/ Media Manager). Once again I got the same error messages. So I restarted and attempted to manually register the dll's again, and I'm now getting the error message:
DllRegisterServer in gw.dll failed.
Return code was: 0x80070005
So, to sum it all up, I've tried all six "resolutions" that RIM has at: http://www.blackberry.com/btsc/articles/963/KB03928_f.SAL_Public.html, and the first "workaround." The second "workaround" doesn't apply because there is no option to "ignore," there is only one button that is "Ok." I'm starting to get pretty pissed off by all of this and I'm ready to throw the **bleep** Blackberry out the window. I love the phone and it's capabilities, but if I can't use the capabilities then it's pretty much worthless to me... then I should have just gotten an iPhone or a WinMobile device. It makes no sense to me that the software will install just fine on my WinXP x64 machine at work and not on my 32-bit home machine. Usually it's the 32-bit progs on the 64-bit machine that cause problems. When is a fix going to come?
Here are my details:
BB Curve 8320, OS v4.5.0.52 (Platform 2.7.0.66)
DesktopManager Software v4.6 (w/ MediaManager)
WinXP Pro, Service Pack 3
Pentium 4, 2.80GHz
2GB DD400 Dual-Channel RAM

Hi,
Cleanboot your PC
make sure all firewall anti virus programs are off
Clean your windows temporary files
Start desktop software.
Please let me know how it goes!
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Crystal Reports Installation Issue (Error 1904/ HRESULT -2147024769)

Hi,
While installing Crystal Reports 2008 -trial version on Windows-xp I am getting the following error:
"Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportSourceBridge.dll failed to register. HRESULT -2147024769. Contact your support personnel."
Integration Kit for SAP has not yet been installed. But Business Objects XI3.1 Client Tools are installed.
Crystal Reports version is 12.0.0.86.
Is it an compatibility issue or other problem? What is the resolution? Are there any Fix Pack available? Any alternative approach that works?
Any suggestions on this are welcome.
Regards,
Amogh

Hello,
Download Crystal Reports 3.1. It should be version 12.1.0.xxx. It may be the order you are installing also, Install CR first and then the other parts.
1904 is a MSIExec error code. Typically it's due to outdated Microsoft installer or permissions and/or network speed or.... Be sure you are logged in as the local PC administrator or have the same rights as. Copy the installer to your local hard drive and run the setup.exe by right clicking on it and selecting Run as Administrator...
Here's a link for the full build of SP1: https://smpdl.sap-ag.de/~sapidp/012002523100006556612009E/cr2008v1win_rf.exe
Thank you
Don

Firefox freeze whenever flash error happens

I have the newest firefox and the flash debug version. Whenever there is an flash error happen, the error message window popup, and then my firefox freeze immediately. It seems like the problem only happen on debug version of flash. I searched online, people said change the "dom.ipc.plugins.timeoutSecs" to -1 will fix the problem, but I tried, it doesn't really fix it. Anyone know anything I could try to fix it?
Thanks.

Hi. karaoke I am not sure if its the same issue. The crash at language switch on my computer was due to the IME for Eastern Language Banks (Language option -> Detail under text services and input languages -> Properties -> reset/untick auto learn).
If you are not using Eastern Language IME... I am sure others here have more experience and can better help you. =)

Checkdb found 6 allocation errors , how to fix ?

HI Experts,
checkdb found 6 allocation errors, how to fix ?
Thanks in Advance!
Vijay

Causes
file system corruption,
underlying hardware system issues,
driver issues,
corrupted pages in memory,
problems with the SQL Server Engine.
Possible solutions
1.best solution if CHECKDB reports consistency errors is to restore from a known good backup.
2. If you cannot restore from a backup, then CHECKDB provides a feature to repair errors.
3. If system level problems such as the file system or hardware may be causing these problems, it is recommended you correct these first before restoring or running repair. 4. Allocation error in Index page, please recreate the index.
Thanks - Vanchan.Please MARK AS ANSWER, if my answer is useful to U.

Possible fix for embed tag problems in Safari 5.1 - Quicktime 7.6.6

I would be grateful if anyone can confirm the following problem and fix:
A user of my website reported that embedded audio (mp3) files ceased playing after installing Safari 5.1 on OS X 10.6.8. I updated my test machine's Safari from 5.0 to 5.1 and confirmed the issue. Some audio would play, some wouldn't. Wierder, a random selection of Javascript-triggered embedded audio would report, "Error calling method on NPObject".
I had a very similar issue with 64-bit Mac Firefox 5 and Quicktime Plug-in 7.6.6. In the case of Firefox 5, the fix was to open Get Info... on Firefox and select 32-bit mode (this also stopped an annoying Quicktime dialog).
The Safari problem with embedded mp3's didn't occur under a fresh user account, so I came up with a possible fix:
In Safari, choose "Empty Cache...", followed by "Reset Safari", checking only "Remove all website data" (if you don't want to lose your auto-fill, passwords and history).
My system seems to have recovered its senses... I'm just wondering if the fix above was what did the trick.
Cheers,
Chris

I followed these steps and it did not fix my problem. I still click on an mp3 link and it downloads, rather than opening in the browser.
It gives me the option of choosing, and works both ways (download/open) in Firefox.
sample link: AccNoir+Fest+2011+PRA+mp3.mp3
Curiously, if I click "Open With" on the dowloaded file and tell it to open in Safari, it opens fine like I want. So it's not that Safari can't, it just isn't being told properly.

Flash Error 1904 possible fix

Similar Messages

Maybe you are looking for