Flash Export of Slideshow hoses users using IE for Windows

I have exported a slideshow from Keynote as Flash and it works great in Safari and other Mac browsers. When I run the show on Windows XP in IE 6 each frame in the presentation modifies the URL of the page with an anchor. eg. test.html#SlideFrame_1 rapidly becomes test.html#SlideFrame_2 and so on.
This is a fairly fast slideshow and so the user can never use his location bar as the URL is so frequently changing. Makes Flash export from Keynote useless to me. Any ideas?
G5 Dual 2.0 Mac OS X (10.4.4)

Looks like everything's working to me. I was having this same problem, but never got around to uploading the flash to the site because it keeps looping for me, too. But your's seems to be fine--did you do anything to correct this, or did it seem to fix itself?!
Bryan

Similar Messages

Printer shared from my Mac is not seen from a PC using Bonjour for Windows

I am going nuts here, hope someone can help.
I have a Canon multi-function printer (MP830) attached via USB to a Mac G4 (with Mac OS X Tiger). At one time, I had it set so a Windows 2000 PC could print to it but deinstalled it after some printing issues, and have been unable to get to working again. The machines are connected together via a Netgear router. As far as I know, everything is the same as it was before, yet I cannot get it to work as it did.
- The printer works fine from the Mac.
- If I connect the printer to the PC, it works fine.
- On the PC, using Bonjour for Windows, I cannot see the printer attached to the Mac but I can see, and print to, an Epson printer that is attached to a different Mac.
- And from the second Mac, I am able to see -- but not successfully print to -- the Canon printer. The print job stays in the queue of the second Mac and says "Unable to connect to SAMBA host, will retry... Error: Connection failed with error."
- I have tried:
-- de-installing and re-installing Bonjour for Windows and the Canon print drivers on the PC
-- and have de-installed and re-installed the Canon drivers on the Mac
-- I have removed and re-added the Canon printer on the Mac. Printer Sharing is on, and this printer is checked in the Sharing box.
Any suggestions?
G4 Quicksilver and Dell PC with Windows 2000 Mac OS X (10.4.9) Canon MP830

Thank you. Those are beautifully written procedures.
Looks like it's a network issue. I reach the step, "Adding a printer using the wizard":
You must enter the following URL, you must use the Queue Name you noted down earlier
http://<IP address of Mac>:631/printers/Queue Name
which I do, entering
http://192.168.0.4:631/printers/MP830
and I get the following error:
"Could not connect to the printer. You either entered a printer name that was incorrect or the specified printer is no longer connected to the server."
And then I am toast!
Using the other procedure, I simply don't see the Mac's printers in the Bonjour Wizard's "Browse for Bonjour Printers" window.
Not sure where to go from here -- any ideas?
The Mac's IP (set via DHCP) is 192.168.0.4, subnet mask 255.255.255.0. The PC is 192.168.0.5, I can't find the subnet mask.
Pretty sure it's a network config issue, especially isnce I can Bonjour to my other Mac.
TIA...

Help downloading & using Illustrator for Windows Vista 32 bit laptop

Hello everyone:
I'm new to Adobe forums and would like to ask if anyone knows how to work around using Illustrator for Windows Vista 32 bit laptop. I tried twice, yet won't allow download due to "system requirements." I'm trying to start with a free trial. Thanks for the assist in advance!

As Mike said, CS6 is the last version to support Vista.
Download CS6 products
Creative Suite 6
Mylenium

I am running Office 2013. Trying to sync my reminders with my iphone using icloud for windows, but it is not working. Can anyone please help?

I am running Office 2013. Trying to sync my reminders with my iPhone 5c version 7.1.2 using icloud for windows, but it is not working. Can anyone please help?

I have photoshop elements 2.0 for xp. Is there a chance of using it for windows 8 ?

I have photoshop elements 2.0 for xp. Is there a chance of using it for windows 8 ?

Hi jerryoops,
Photoshop Elements 2.0 has not been tested and is incompatible for Windows 8.
Please consider purchasing the latest version Photoshop Elements 11.0 which is compatible with Windows 8.

Is there a way to burn audio to a cd using itunes for windows?

Is there a way to burn an audio cd using itunes for windows?

Make a playlist.
Click File>Burn Cd

Using Lightroom for Windows 8.1 with Epson Stylus Photo R3000 printer.

Using Lightroom for Windows 8.1 with Epson Stylus Photo R3000 printer. From PRINT section, if I click either "Page Setup" or "Printer" I get the Epson printer dialog box, drill down, change settings- so far so good. When I'm finished with the settings and close the dialog box (hit OK) the print job starts immediately; I never get a chance to hit the Lightroom "Print" button. Question: does this bypass any Lightroom processing or control of the print job?

Even if I just click the Printer button to verify my settings I should then return to Lightroom, and then click Print to start the job. This does not happen, the job starts as soon as I close the properties dialog box. Again, is any Lightroom processing or control being bypassed because of this?

Flash export of slideshow keeps looping, hyperlinks not working.

I have made an intro page for a website using Keynote 3 <http://web.mac.com/archstanton1862/iWeb/Tricktrial/Welcome.html> I can't figure out why the page keeps looping. It should go through it's transitions and then stop. Right? Also, the ENTER hyperlink is supposed to go to <http://web.mac.com/archstanton1862/iWeb/Trickracing1/Menu.html> but it instead goes to www.apple.com/startpage What's the deal? I have loop slideshow "unchecked" in the playback options. I used iWeb Enhancer 1.0.1 to embed the flash animation html, and it worked awesome. It just keeps looping and the hyperlink is wrong. Is what I'm wanting to do even possible? HELP!!

Looks like everything's working to me. I was having this same problem, but never got around to uploading the flash to the site because it keeps looping for me, too. But your's seems to be fine--did you do anything to correct this, or did it seem to fix itself?!
Bryan

Anyone else having an issue with TCP connections using iCloud for Windows?

Hi,
Before I asked this question, I did wait to see if any related questions came up, but none did, so I submit it now.
On my admittedly older laptop running Windows 7 64b Home, I've run into difficulties with the iCloud for Windows app to the extent that I had to uninstall it.
It would that, as my laptop was running, in the background, iCloudServices.exe would endlessly iterate TCP connections, which, while not actively sending or receiving any data, after some hours would number over 100 instances, taking up resources, and grinding my laptop's WiFi connection to a grindingly slow pace. I ended up, within the app, turning off everything, iCloud Drive and Photos, (I never used bookmarks), but still this would continue to occur.
I contacted Apple Support, explaining what was going on, and they stated they only dealt with IOS and gave me a Microsoft Support number. When I called Microsoft support, I came more and more to the realization that the issue was specifically with the iCloud for Windows app, as that was the only software that was endlessly creating and not closing TCP connections as it was. How was Microsoft supposed to solve an issue with Apple code?
So I called Apple back, whereupon they insisted it was a Microsoft issue. I explained other cloud services installed on the same computer were not having the same issue, it was unique to ICloudServices.exe. They stated they only dealt with IOS. I stated I purchased an iPad Air less than 7 months ago, and was trying to run iCloud in support of that. They again stated they only dealt with IOS, and suggested I again try Microsoft. I asked them if it was reasonable to expect Microsoft to solve issues with Apple code? They said regardless, there was zero support offered for anything having to do with Windows, and all I could do was uninstall the app, which I did, though that did not feel very satisfactory to me. My thinking is, if Apple writes a Windows app in support of their hardware, they should offer support for it.
Anyway, I was just wondering, is this an issue unique to me? or have others experienced a similar issue? I found this issue by opening the Windows Resource Monitor, looking under the Networking tab, and scrolling through the TCP Connections section to find 100+ concurrent iCloudServices.exe instances listed, whereas even Chrome, with multiple tabs and extensions, topped out at around 20.
My one month old Desktop, DYI, sports a solid Asus 1150 MoBo, i7-4790k cpu, 16GB Ram, and an EVGA GTX 970 video card. I list some specs only to illustrate this computer has no hardware issues in comparison to my long in tooth laptop. On this desktop, running Win 8.1 Pro 64b, at least as many, identifiably Apple, background service TCP connections are created even compared to Chrome, regardless of many tabs being open, many extensions, and even some related apps. Adobe does not even come close, though I run the full CC subscription. On this new computer, running Windows 8.1 Pro 64b, there are currently over 50 TCP connections and loopbacks that do not identify themselves, with just a - for the Image, and PID. With the experience on my laptop, I wonder how many of these are generated by Apple software, if not specifically iCloud software?
The frustrating aspect of these connections is they seem in no way active, While the Chrome and Adobe connections can be seen to be transferring data, as long as I am not running iTunes, or so have my iPad actually plugged in, it seems 99% of the time these iCloudServices.exe connections are just taking up ports, neither sending nor receiving any data discernable to me under the Processes with Network Activity, or Network Activity lists, both displayed in the same window as the TCP Connections in the Windows Resource Monitor.
Though I am fairly ignorant as regards coding, it seems as if there is no call to close a connection, very specifically, iCloudServices.exe, when it is no longer needed, and the next time a connection is needed, a new one is opened, rather than accessing the one previously opened. The only other reason I could imagine this might be occurring is if my Norton Internet Security software might mask and/or block the port after a certain time of inactivity.
Anyone out there have any ideas or advice about this? Thanks in advance.

Thanks jared,
I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.

3d Builder connect issues using Kinnect for Windows v2

I am running Windows 8.1, have a Kinect for Windows V2 sensor connected to my USB port, and have both the latest 2.0 SDK w/ Fusion & 3D Builder app installed. I already made sure I have webcam use enabled for 3D Builder under my privacy settings. Prior
to installing the 3D Builder, I was able to produce 3D .stl files using Fusion 2.0. I installed 3D Builder and attempted a scan, but I got a "no sensor connected" message. I started up Fusion and I'm no longer getting any depth feedback from the
Kinect to build a 3D .stl model. The image area is just blank white. I tried the Kinect Studio v2.0 application & have full sensor feedback - I can see a depth map and everything. I closed Studio & Fusion and reopened 3D Builder. Was able to click
scan this time. However, even though I'm no longer getting the "no sensor" message, it's acting as though it's scanning, but it isn't... I mean, I can start & stop a scan via the scan button, but it's blank like it was in Fusion & isn't generating
any sort of 3D model. I am able to import the scans I previously made in Fusion, edit those, and export to my printer. But, that's it. Ideally, I'd like to eliminate Fusion from my workflow and just use 3D Builder. But now I'd be overjoyed just to be
able to use Fusion to scan again. Is there a conflict w/ having both the SDK & 3D Builder installed? Please advise.
Thanks - Matt

Yes, both cam & mic have permissions enabled. I haven't installed evolution on my PC. IDK if there's really a need, is there? Isn't it about the same as Kinect Studio? I mean, I see the depth map and all that... it's just not a metro app. I'll install
it when I return home if that'll help diagnose the problem.

HT1926 Have been using itunes for windows fine, but download recent itunes 9/2012 then itunes APPCRASH for itunes not working trying to launch downloaded material in TV section of itunes

Have been using itunes fine, but download itunes update 9/2012 cause tv material in itunes section to not work and view material, solution? Saw APPCRASH on problem section Also, my daughter's ipod nano ( second version with elongated screen) is not recognized by itunes? solution? Thank-you

Have been using itunes fine, but download itunes update 9/2012 cause tv material in itunes section to not work and view material, solution?
Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Silent Install using ResponseFile for Windows XP

Hi,
Does anyone know or have any custom responseFile that works? I have tried many times to do a custom install using the clientcustom.rsp from the CD and also from record mode but not all components seems to install correctly eventhough the log said it installed successfully. Especially the Oracle Universal Installer component.
please help
thanks

Here is a copy of a customclient.rsp file that I used to successfully install/uninstall Oracle 9i Client. Please note that the problem I have is determining when the silent install finishes. The install gets launched as a background task.
## Oracle9i Client Custom Install Response File Template ##
## Copyright(c) Oracle Corporation 1998,2000. All rights reserved.##
## Specify values for the variables listed below to customize ##
## your installation. ##
## Each variable is associated with a comment. The comment ##
## identifies the variable type. ##
## Please specify the values in the following format: ##
## Type Example ##
## String "Sample Value" ##
## Boolean True or False ##
## Number 1000 ##
## StringList {"String value 1","String Value 2"} ##
## The values that are given as <Value Required> need to be ##
## specified for a silent installation to be successful. ##
## This response file is generated by Oracle Software ##
## Packager. ##
[General]
RESPONSEFILE_VERSION=1.7.0
[SESSION]
# Name : ORACLE_HOME
# Datatype : String
# Description : Full path of directory to use for installing Oracle
# products - the "Oracle Home"
# Valid values : Directory path (existent or non-existent)
# Example value : "d:\oracle\products\9.0.1"
# Default value : none
# Mandatory : Yes
ORACLE_HOME="C:\oracle\ora92"
# Name : ORACLE_HOME_NAME
# Datatype : String
# Description : Name used to uniquely identify the Oracle Home on this
# system.
# Valid values : String that is unique on this system
# Example value : "OHOME1"
# Default value : none
# Mandatory : Yes
ORACLE_HOME_NAME="OraHome92"
# Name : TOPLEVEL_COMPONENT
# Datatype : StringList
# Description : Top-level product and version to install
# The format is of the form {"<Internal name>", "<version>"}
# Note : DO NOT CHANGE THE DEFAULT VALUE.
# To install different top-level products, use one of the
# other response file templates
# Mandatory : Yes
TOPLEVEL_COMPONENT={"oracle.client","9.2.0.1.0"}
# Name : DEINSTALL_LIST
# Datatype : StringList
# Description : List of components to be deinstalled during a
# : deinstall session
# Valid values : <"oracle.server","9.2.0.1.0">
# Default value : none
# Mandatory : No
DEINSTALL_LIST={"oracle.client","9.2.0.1.0"}
# Name : SHOW_SPLASH_SCREEN
# Datatype : Boolean
# Description : Set to true to show the initial splash screen of the
# installer
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_SPLASH_SCREEN=true
# Name : SHOW_WELCOME_PAGE
# Datatype : Boolean
# Description : Set to true to show the Welcome page of the installer
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_WELCOME_PAGE=false
# Name : SHOW_COMPONENT_LOCATIONS_PAGE
# Datatype : Boolean
# Description : Set to true to show the component locations page in
# the installer. This page only appears if there are
# products whose install directories can be changed.
# If you set this to false you will prevent the user
# from specifying alternate install directories.
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_COMPONENT_LOCATIONS_PAGE=false
# Name : SHOW_CUSTOM_TREE_PAGE
# Datatype : Boolean
# Description : Set to true to display the available products
# selection tree during a Custom install
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_CUSTOM_TREE_PAGE=false
# Name : SHOW_SUMMARY_PAGE
# Datatype : Boolean
# Description : Set to true to display the Summary page in the
# installer
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_SUMMARY_PAGE=false
# Name : SHOW_INSTALL_PROGRESS_PAGE
# Datatype : Boolean
# Description : Set to true to show the install progress screen.
# This screen shows detailed status of the
# installation, which file is being copied, which link
# action is being performed, etc. It also shows
# percentage complete.
# Valid values : true, false
# Default value : true
# Mandatory : Yes
SHOW_INSTALL_PROGRESS_PAGE=true
# Name : SHOW_REQUIRED_CONFIG_TOOL_PAGE
# Datatype : Boolean
# Description : Set to true to display the status screen for
# required configuration tools. This screen shows the
# status of each tool along with detailed information
# in the event of tool failure.
# Valid values : true, false
# Default value : true
# Mandatory : Yes
SHOW_REQUIRED_CONFIG_TOOL_PAGE=true
# Name : SHOW_OPTIONAL_CONFIG_TOOL_PAGE
# Datatype : Boolean
# Description : Set to true to display the optional configuration
# tool page which allows you to launch optional
# configuration tools and view details status,
# including details on any failures.
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_OPTIONAL_CONFIG_TOOL_PAGE=false
# Name : SHOW_RELEASE_NOTES
# Datatype : Boolean
# Description : Set to true to show the release notes screen from
# which Release Notes can be viewed. NOTE, 9.0.1 does
# not use any release notes so this will not be
# relevant for an 9.0.1 install.
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_RELEASE_NOTES=false
# Name : SHOW_END_SESSION_PAGE
# Datatype : Boolean
# Description : Set to true to display end session dialog. This
# page shows whether the installation is successful.
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_END_SESSION_PAGE=true
# Name : SHOW_EXIT_CONFIRMATION
# Datatype : Boolean
# Description : Set to true to display dialog for confirming exit.
# If set to false, installer will exit without
# prompting.
# Valid values : true, false
# Default value : false
# Mandatory : No
SHOW_EXIT_CONFIRMATION=true
# Name : NEXT_SESSION
# Datatype : Boolean
# Description : Set to true to allow users to go back to the File
# Locations page for another installation. If this is
# set to true, NEXT_SESSION_RESPONSE should be used to
# indicate location of the second reponse file.
# Valid values : true, false
# Default value : false
# Mandatory : No
NEXT_SESSION=false
# Name : NEXT_SESSION_ON_FAIL
# Datatype : Boolean
# Description : Set to true to allow users to go back to the File
# Locations page for another installation even if the
# first installation failed. This flag is only
# relevant if NEXT_SESSION is set to true.
# Valid values : true, false
# Default value : false
# Mandatory : No
NEXT_SESSION_ON_FAIL=false
# Name : SHOW_DEINSTALL_CONFIRMATION
# Datatype : Boolean
# Description : Set to true if deinstall confirmation is needed
# : during a deinstall session.
# Valid values : true, false
# Default value : true
# Mandatory : No
SHOW_DEINSTALL_CONFIRMATION=true
# Name : SHOW_DEINSTALL_PROGRESS
# Datatype : Boolean
# Description : Set to true if deinstall progress is needed during
# : a deinstall session.
# Valid values : true, false
# Default value : true
# Mandatory : No
SHOW_DEINSTALL_PROGRESS=true
# Name : LOCATION_FOR_DISK<disk number>
# Datatype : String
# Description : Set to the full path of the root of the subsequent CDs in
# the Oracle9i set. This may be a mounted CD-ROM location or
# a location on the hard drive if you have copied the
# CD images to the hard disk.
# Valid values : full path to the root of the CD corresponding to the disk
# number indicated.
# Default value : None
# Mandatory : Yes
LOCATION_FOR_DISK2="P:\Imaging\Oracl9i Client"
LOCATION_FOR_DISK3="P:\Imaging\Oracl9i Client"
# End of GENERAL SESSION section
# Oracle9i Client
[oracle.client_9.2.0.1.0]
# Name : COMPONENT_LANGUAGES
# Datatype : StringList
COMPONENT_LANGUAGES={"en"}
# Name : INSTALL_TYPE
# Datatype : String
# Description : Type of installation for the Oracle9i Client
# Note : DO NOT CHANGE THE DEFAULT VALUE.
# To install using a different install type, use one of the
# other response file templates
# Mandatory : Yes
# Example : INSTALL_TYPE = "Custom"
INSTALL_TYPE="Custom"
# Name : DEPENDENCY_LIST (oracle.client)
# Datatype : StringList
# Description : List of optional products to be installed along with
# this one. The following choices are available. The
# value can contain any combination of these choices.
# Note : The products listed are optional dependencies. Any
# required dependencies will automatically be installed.
# Valid values :
# oracle.emcltprod, 9.2.0.1.0 : Oracle Enterprise Manager Products 9.2.0.1.0
# oracle.networking.netcltprod, 9.2.0.1.0 : Oracle Network Utilities 9.2.0.1.0
# oracle.utilities.util, 9.2.0.1.0 : Oracle Database Utilities 9.2.0.1.0
# oracle.java, 9.2.0.1.0 : Oracle Java Utilities 9.2.0.1.0
# oracle.rdbms.sqlplus, 9.2.0.1.0 : SQL*Plus 9.2.0.1.0
# oracle.apache.isqlplus.ise, 9.2.0.1.0 : iSQL*Plus Extension for Windows 9.2.0.1.0
# oracle.java.jdbc, 9.2.0.1.0 : Oracle JDBC/OCI Interfaces 9.2.0.1.0
# oracle.java.jdbc.thin, 9.2.0.1.0 : Oracle JDBC/THIN Interfaces 9.2.0.1.0
# oracle.oid.client, 9.2.0.1.0 : Oracle Internet Directory Client 9.2.0.1.0
# oracle.winprod, 9.2.0.1.0 : Oracle Windows Interfaces 9.2.0.1.0
# oracle.rdbms.ocitop, 9.2.0.1.0 : Oracle Call Interfaces 9.2.0.1.0
# oracle.p2k, 9.2.0.1.0 : Oracle Programmer 9.2.0.1.0
# oracle.p2k.xmldevkit, 9.2.0.1.0 : Oracle XML Developer's Kit 9.2.0.1.0
# oracle.doc.windoc, 9.2.0.1.0 : Oracle9i Windows Documentation 9.2.0.1.0
# oracle.swd.oui, 2.0.0.8.0 : Oracle Universal Installer 2.2.0.8.0
# oracle.options.ano, 9.2.0.1.0 : Oracle Advanced Security 9.2.0.1.0
# oracle.java.sqlj.sqljruntime, 9.2.0.1.0 : SQLJ Runtime 9.2.0.1.0
# oracle.options.intermedia.imclient, 9.2.0.1.0 : Oracle interMedia Client Option 9.2.0.1.0
# oracle.options.olap.api, 9.2.0.1.0 : Oracle OLAP API 9.2.0.1.0
#Example : DEPENDENCY_LIST = {"oracle.emcltprod","9.2.0.1.0"}
DEPENDENCY_LIST={"oracle.networking.netcltprod","9.2.0.1.0","oracle.winprod","9.2.0.1.0","oracle.rdbms.ocitop","9.2.0.1.0","oracle.options.olap.api","9.2.0.1.0"}
# Oracle Enterprise Manager Products
[oracle.emcltprod_9.2.0.1.0]
# Name : DEPENDENCY_LIST (oracle.emcltprod)
# Datatype : StringList
# Description : List of optional products to be installed along with
# this one. The following choices are available. The
# value can contain any combination of these choices.
# Note : The products listed are optional dependencies. Any
# required dependencies will automatically be installed.
# Valid values :
# oracle.sysman.client, 9.2.0.1.0 : Oracle Enterprise Manager Client 9.2.0.1.0
# oracle.sysman.pack.change, 9.2.0.1.0 : Oracle Change Management Pack 9.2.0.1.0
# oracle.sysman.pack.diag, 9.2.0.1.0 : Oracle Diagnostics Pack 9.2.0.1.0
# oracle.sysman.pack.tuning, 9.2.0.1.0 : Oracle Tuning Pack 9.2.0.1.0
# oracle.sysman.pack.apps, 9.2.0.1.0 : Oracle Management Pack for Oracle Applications 9.2.0.1.0
# oracle.sysman.pack.std, 9.2.0.1.0 : Management Pack for Oracle Standard Edition 9.2.0.1.0
DEPENDENCY_LIST={ "oracle.sysman.client","9.2.0.1.0","oracle.sysman.pack.change","9.2.0.1.0","oracle.sysman.pack.diag","9.2.0.1.0","oracle.sysman.pack.tuning","9.2.0.1.0","oracle.sysman.pack.apps","9.2.0.1.0"}

Exporting .dv files to supported files types for Windows Movie Maker

I am digitizing all of my friends' family videos with iMovie and I now have them all as Apple .dv files. Unfortunately some of my freinds do not have Macs, so I must convert them. There are many options for converting .dv files to formats that Windows Movie Maker can import, but every combination of wrapper and codec I have tried has either resulted in low quality or results in a size that it is at least double. Because these are family memories I do not want to lose quality compared to the Apple Mac .dv files that I have. On the other hand, I would prefer not to double the file size for the same quality that I had.
What converter do you recommend and what combination of wrapper (mpeg4, avi, mov, etc.) and codec (h264, jpeg, etc.) can convert Mac .dv files into full resolution files for Windows Movie Maker?
What I have tried:
I was advised by Applecare to try DivX converter, but it does not accept .dv files. I have been trying Mpeg Streamclip with the following combinations:
exporting to AVI with DivX Codec seemed low quality
exporting to AVI with H.264 was not readable by Windows Movie Maker
exporting to AVI with Apple Photo JPEG Codec was more than twice the orginal .dv file size
Thanks.

mkl111 wrote:
... There are variants of dv files and .. .
best to my knowledge - no.
.dv is a standard, created by movie-cams. iMovie handles this codec 'natively'.
only allowed differences are PAL and NTSC …
I copied a zillion .dv files without processing/editing directly from the Events folder onto a fat32-formatted HDD.
but even edited movies are compatible: Export using Quicktime and in the drop down DV-STREAM ...
afaik, in Movie Maker you have to choose 'Import file' - done.
sorry, no idea which of the hundred of versions of WMM is in use on the other side of the street

Created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

You are using an older version of firefox, upgrade your browser to Firefox 8 and try
* getfirefox.com

Using parallels for windows xp on my macbook

Hello. I want to take online GIS classes from ERSI this winter and am thinking about buying parallels to run their software (which is only supported by windows xp or vista). I am basically pretty computer illiterate and am not really sure about the most cost efficient way of setting this up. I know I have to buy parallels (or bootcamp, which is better for this case?), then buy the windows software, then install and hope for no hiccups the GIS training software (which is not supported by the ERSI online team when run on a mac). Has anybody gone through this specific or related procedure before and what kind of results did you have? Is my plan sound? With my tiger operating system do I still have to buy bootcamp, is that better to use than parallels? I don't have any other plans to use windows except maybe to send photos through my hotmail account. I will greatly appreciate any advice and/or direction you can provide. Thank you,
Dave

Hi,
I use Parallels with Windows XP and it runs just fine. I need Windows for one application that is not any where to be found for Macintosh. Follow the Parallels directions for installation and you should have any problems. To use Bootcamp you would need to be running Leopard.

Flash Export of Slideshow hoses users using IE for Windows

Similar Messages

Maybe you are looking for