Flash file coming up in google
Hello,
I've used Flash for my portfolio which has details of
websites that I've designed -www.rubydesign.co.uk/portfolio.html
but one of my clients has told me that when he googles his name
"sean pines" the fourth link that comes up is the flash movie file
on my website which looks rubbish. Any ideas how to stop this from
happening?
Many thanks
You could try using a robots.txt file
http://en.wikipedia.org/wiki/Robots.txt
Similar Messages
-
Hello Everyone,
I have a strange problem and I'm not sure exactly what it is.
I have a 1.5 Joomla site with this module in it
<object height="20" width="1035">
<param name="movie" value="LEDDisplayTicker-1040.swf" />
<param name="wmode" value="transparent" />
<param value="high" name="quality" /> <embed height="20" width="1035" wmode="transparent" src="LEDDisplayTicker-1040.swf"></embed> </object>
The site works fine in Chrome, FireFox and Safari but when it is viewed with IE I get an error and the page closes ( you have to surf through a few pages).
I know it is the above module because if I turn it off, the site works fine in IE.
The flash file imports and displays info from an XML file and the XML file reads from google finance.
Any ideas?
Thanks,
ToddDo the flash communicate with files which is outside of the sitedomain?
-
How can I add my converted flash file to my website?
I have made a nice Keynote presentation with many transitions. I have now converted the presentation to a flash format to put on my website. Does anyone know how I can go about doing this? I am using Google's free page creator software and have not had success uploading the flash file.
Oh yea... I'm working on this project on a new base macbook with 512 ram. I've been having a recurring problem where the laptop will reboot on its own every now and than as i am trying to start the presentation in full screen. Anyone else have this problem?What is the web site?
-
How to upload a image or flash file as blob object in a table.
How to upload a image or flash file as blob object in a table.
What are all the possible ways we can do it.Searching the forum (or google) would be my first choice, as this question pops up every now and then.
Next without knowledge of your environment (jdev version and technology stack) it's hard to give a profound answer.
All I can say is that it's possible.
Timo -
Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? ThanksI just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me.. -
Can't open Flash files on Windows XP
I have Flash Player 9 installed. I can view Flash files
online in my browsers (IE and Firefox), but when I try to open a
Flash file on my computer to just play it in Flash Player, it asks
me what I want to use to open the file. I have searched the support
documents and looked online everywhere, but can't seem to find the
problem. Basically, I can't find the actual Flash Player program
file on my machine. I know it's there, otherwise I wouldn't be able
to view Flash files in the browser, but I can't view them on my
local machine.
I have tried setting the program associated with .swf files
in folder options to the following, but none of them work. When
associating .swf files with any of these, it says an update for
Flash is available. I go through the update, reboot because it says
it's required, but when I start back up, it just does the same
thing. I cannot open Flash files (.swf) on my computer, only in the
browser and none of the paths I have tried setting .swf files to
open with are actually the Flash Player application. I need to know
where the Flash Player is on Windows XP.
HELP?!?!?!
The paths I've tried are:
C\WINDOWS\stsyem32\Macromed\Flash\Flash9b.ocx
C:\WINDOWS\system32\Macromed\Flash\FlashUtil9b.exe
C:\i386\Flash.ocx
C:\Program Files\Mozilla
Firefox\plugins\NPSWF32_FlashUtil.exe
None of them will open Flash files on my local computer. I
have searched my machine, and those are the only paths I can find
that have anything to do with the Flash Player. Even though it's an
Adobe product now instead of a Macromedia product, I can't find
anything for Flash in any Adobe directories, just Macromedia
directories.
Does anyone know how to remedy this? Has anyone else had this
same problem? Any help would be
GREATLY
appreciated!!! It seems like I started having this association
problem as soon as Flash was switched from Macromedia to Adobe.
Thanks!I found the solution. After searching the web for what seemed
like an eternity, I found the following on a Google Groups page:
quote:
1 - How can I make my PC play a flash file on my local hard
drive?
Unless you buy Macromedia Flash (the authoring environment)
you can't play them just straight off, you have to open them with a
browser which has the Flash Player plugin installed. To do this,
either right-click on the .swf and select open with... (internet
explorer) or open IE and then go to file... open.... etc.
Then I realized that I started having the problem about the
time I got my new laptop. I didn't install Flash MX on my new
laptop because I don't really use it anymore, I use Swish, so I
didn't install it because I hate installing programs I don't use.
Anyways, I installed Flash MX on my new laptop and walla, I can
open .swf files on my machine again.
I didn't realize I had to have Flash installed (the program,
not the player) in order to be able to open .swf files on my
machine as opposed to viewing them in a browser. Guess I know now!
I thought I'd post what I found in case anyone else had the
same problem and didn't realize it.
Thanks! -
Can I embed fonts of all Dynamic Text objects in a Flash file?
Hi there!
I'm fairly new to Flash, so please bear with me.
I have created a Flash file which will act as our company's standard presentation / portfolio of all previous projects. I've pretty much got it running the way I want, but I've just tried it on a few different computers and realised that the fonts aren't embedded. I've used our corporate font so it needs to look right. Having read the following documentation (http://livedocs.adobe.com/flash/9.0/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Liv eDocs_Parts&file=00000893.html) I now understand how to embed fonts for one dynamic text object at a time. However, I have a lot of different dynamic text objects in the file and I would dearly love to embed them all in one step! The same embedding options can be applied to just about all objects, as they're all the same size and font.
I hope someone can help me. If you are able to help please spell things out in simple steps!! I am aware that I probably haven't yet grasped a number of the basics of Flash.
Thanks in advance,
StuartStatic text doesn't need to be embeded. So I'm not sure what the problem you are having is. The page you linked to is for making an embedded font in your library that can then be exported for actionscript and used by code and style sheets. If you are following the instructions on the page you liked to you only need to do that once. Which shouldn't be too hard.
That is usually a different problem that having a bunch of different authortime created textfields that need to have characters embedded.
As far as I know your only hope to change a bunch of authortime/library items is using JSFL. So even if the thing I pointed to isn't exactly what you need you could keep googling a bit or use that as a template.
JSFL files are just text files so open it in note pad. Look for the line:
if(it[i].itemType == "movie clip")
and change it to this:
if(it[i].itemType == "movie clip" || it[i].itemType=="button")
Now it does buttons. You give up too easy. -
Embeded Flash files stop loading part way through after update to 10.2
Hello, I am currently having an issue with Flash. After the last update to 10.2, flash files, both audio and video, stop loading part way through them and do not start up again. For instance, on youtube, about 2 minutes worth of video will load but load slowly and then stop completely. The only way to get it to advance is to click past the section that has loaded and it will load the next 2 minutes. On Myspace Music, a song plays about 40 seconds each time and stops completely and will not load anymore, even if I try to skip to another part of the song. I am running Windows 7 Ultimate 64bit edition with Firefox 4.0 Beta 12 64 bit edition as well. Also I have tried clearing my cache, cookings, temp files, removing and installing Flash countless times, including older versions, as well as tried Google Chrome and IE. All give me the exact same issue no matter what I do. It is really frustrating because I cannot watch or listen to anything embeded in Flash online without having to keep clicking the next section every little bit. If anyone can help, please do and I thank you.
Hi, Since your OS is a 64bit, are you using the 32bit browser for IE? I see you have the FF beta. Have they come out with a 64bit browser? I don't follow the FF beta so if that's true, it's news to me.
Let me know,
Thanks,
eidnolb -
How to make exported Flash files as small as possible?
I am producing some Web Presenter videos, and they are going to be embedded onto a website.
This is my current workflow:
.Import video and then Key it in Adobe Ultra
.Import keyed footage into After Effects to allow me to set pixel dimensions for composition
.Render as flash file
Currently, I am rendering them as .Flv (web small) in the settings, but the files are coming out at 8-12mb, and the video is only 60 seconds long. I have seen some guys get flash videos of this length down to 3mb.
My question, am I rendering under the most sensible settings, or is there something better I should be doing? I need to keep the files small, but without losing much quality.
Here is an example of a recent Web Presenter I did: http://www.ukpostbox.com
I did the filming and presentation, and a friend (who has since died) did the editing. It will give you an example of the effect I'm looking for. Also, is the 'start' button something I can add myself, or is that normally done by the web designers at the clients end?
You might need to explain everything in simple terms to me as I am very new to After Effects, and this type of editing system.
Thanks,
James.You may also have to edit the export settings.
When you export to flv with the preconfiguration "web small" you shall dig in it and adjust the data rate (lower it until you get the quality you want).
Sadly, encoding isn't a skill that have a long curve of learning, and relying on pressets is just the first step (and encoding much depends on what is in the frame, so it's a science by itself as soon as you want more control on your outputs). Also, AE is a compositing system, not an encoding software, so if you have the Production Premium, Master Coolection or Premiere, you should definitly want to export your project from the Adobe Media Encoder.
One of the most important step in downsizing the size of your video while keeping quality is to do "dual pass" encoding, and AE can't do that.
The great thing is that you can import an AE composition right inside AME, so you don't need to do a temp encoding. -
Swf flash files are not displaying neatly within table cells.
The latest version of Firefox (3.6.12) The website I have design now shows thick lines underneath the flash files. URL Below. The table of pictures should be neat, instead the cells in which the flash files are contained are increasing in height and breaking apart the table . This does not happen in previous version of Firefox, Internet Explorer & Google Chrome.
Is there anything i should be doing different when inserting flash files into web pages that have complex tables? Or is this a problem with Firefox?
http://www.arnoldwills.co.uk/Master_Home.htmlAdd a rule object { display: block } to the stylesheet. An object is an inline element by default.
-
When I try to start my computer a flashing file folder with a question mark is on the screen. I can't open anything up. What does this mean?
There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from its location.
(104258) -
Strange Box Around Flash File IN PC I.E.
I have a strange box that appears around my flash file when
viewed using PC Internet Explorer 6.2. Thhe box appears when the
page loads and does not go away until you click on the flash, once
you do that you can access the buttons and the box goes away.
Baffled.....please help.Please dont cross-post either - already answered twice in the
flash general forum.
--> Adobe Certified Expert (ACE)
--> www.mudbubble.com :: www.keyframer.com
-->
http://flashmx2004.com/forums/index.php?
-->
http://www.macromedia.com/devnet/flash/articles/animation_guide.html
-->
http://groups.google.com/advanced_group_search?q=group:*flash*&hl=en&lr=&ie=UTF-8&oe=UTF-8
m.fogarty wrote:
> I have a strange box that appears around my flash file
when viewed using PC
> Internet Explorer 6.2. Thhe box appears when the page
loads and does not go
> away until you click on the flash, once you do that you
can access the buttons
> and the box goes away.
>
> Baffled.....please help.
> -
Alternative image to flash file
hello
how do i add a alternative gif or jpeg image if the flash
file won't load in a browser. for example when i view my site on an
iphone the flash file doesn't display so i would like a static
image in it's place.
any help much appreciated.... PHello,
Check out these two links:
http://www.alistapart.com/articles/flashembedcagematch/
http://code.google.com/p/swfobject/
Start with the documentation link at the top.
Hope that helps.
Take care,
Tim
"pgc1" <[email protected]> wrote in message
news:g8kt15$gqu$[email protected]..
> hello
>
> how do i add a alternative gif or jpeg image if the
flash file won't load
> in a
> browser. for example when i view my site on an iphone
the flash file
> doesn't
> display so i would like a static image in it's place.
>
> any help much appreciated.... P
> -
I'm working on a site using php. When I place flash files in
the page, I can view it with no problems. It's another story when I
load everything up on a server. All I see is a white box where the
flash movie is. I'm using Dreamweaver CS3 on a MacBook Pro. Any
advice I can get would be much appreciated.You have a number of problems on that page.
1. The Flash in the banner appears but the Flash in the body
does not. I'm
not sure why, but will examine further.
2. The menu will fall behind the Flash element in the body
when it expands.
This will render your site non-navigable.
3. Because you have used all-javascript menus, your site will
not be
spiderable by search engines, since they cannot find the
links in the
submenus when it is embedded in the javascript.
4. Also, because of those menus, you render your page
non-accessable, since
screen assistive devices do not render javascript. In
addition, anyone
coming to your site with javascript disabled will not be able
to navigate
it.
You can maybe deal with #1 by reading this -
All Active content on a page will always rise to the top, so
to speak,
including Flash, certain form elements, Java applets, and
Active X controls.
This means that each of these will poke through layers. There
is not a good
cross-browser/platform reliable way to solve this issue, but
if you can be
confident in your visitors using IE 5+ or NN6+, then you can
use the Flash
wmode parameter (however, Safari does not support this
properly!).
Adobe articles:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_15523
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14201
As for the rest, you should always have redundant, plain text
navigation
available on your site (or a plain text link to a sitemap
page). But there
are ways to do those menus where none of this is a problem -
I'd rather see
you use those methods than this one (which is also a ton of
code).
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jeremygouine" <[email protected]> wrote in
message
news:[email protected]...
> Here is the link:
>
>
http://glowingtreeproductions.com/BCS/media.php
>
> This is not the particular page it is going on, but it
should suffice for
> the
> moment. I have a friend who got it working, but he said
he didn't do
> anything
> I wasn't already doing. So, I have no clue. The biggest
problem for me
> is I
> can't get any Flash files to work when they are uploaded
on my server. I
> appreciate all the help I can get.
> -
Trying to make sure my flash file doesn't require flash 11
im working in cs5.5 flash and i published my flash file with flash player 9 and then added it in a dreamweaver file; uploaded everything to my site and it asks me to download flash player 11.
http://www.rija.ca/CBC_test/CBC_Winter_2011_Test.html
i need it to work w/out flash player 11 cause so many ppl dont have that yet.i'd use swfobject for embedding those swf and i'd replace the edited swfobject used by dreamweaver following the directions here:
http://code.google.com/p/swfobject/wiki/api
Maybe you are looking for
-
I have been using Firefox 5.0 for the past few days. I have been experiencing the following error : I watch videos and suddenly, the video stops. From that point, it becomes impossible to open new tabs, especially, I tried to use the search box (with
-
MacBook pro, 8GB, OSX Yosemite I cannot open iPhoto after latest apple upgrade. Getting message latest iPhoto version is not available in the US.
-
IMovie to iDVD or Final Cut Pro to DVD studio pro "Better output"
I recorded some family videos onto a computer with a WinTV pci board. Converted the MPEG2 to DV/DVCPro NTSC on my Mac with MPEG stremeclip. Used quicktime to divide the tapes/clips where we had switched recordings. Now i was going to use final cut pr
-
Multiple fpga vi's with same interface, single RT vi
Hi everybody, I'm using a crio system to control as experimental setup. In this setup several types of tests can be done and for each, basically the same control is done, but the returned data is different. Therefore i wrote several fpga vi's with th
-
Problem about SunPerformance Library with SunStudio9
I use VMWare to build up an Solaris 10 environment. And I install the SunStudio9 IDE. Here I compile a simple .c file whose MakeFile has -xlic_lib=sunperf option to be compile with SunStudio9. Here is the error information list, please help me ,thank