Flash file missing from page/layout difficulties

Aloha,
I'm working on posting a new site and have a few problems
that are holding me back! First, when tested online via DW, the
flash movie I have in center of page plays (and is placed)
perfectly. After uploading the page
http://reefcheckhawaii.org to
my server however, the flash file doesn't appear. However, it can
be accessed at
http://reefcheckhawaii.org/flashfiles/HOMEPAGE.swf
My tech support for the server said I had it in the wrong folder
and that I should move it "using code." Any recommendations on how
I can get the file placed where it should be to properly function?
My second difficulty as evident by the page posted, is with the
layout. I cannot seem to keep the banner image cells at the top of
the page aligned properly when I add the 4-row table on the right
hand bottom side of page. If I try to "remove table hts" before
adding the lower table, the banner image at top also gets botched
up! Please help, I'm stuck! Many thanks in advance!

http://www.wsrestoration.com/Scripts/AC_RunActiveContent.js
This file is NOT on the server. That's why you do not see
your Flash.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"AAzz44" <[email protected]> wrote in
message
news:fjlb4d$3bp$[email protected]..
> Hi,
>
> Im also having the same problem. Actually things where
working great with
> the
> original site I built in Front Page, but I switched over
to Dreamweaver
> awhile
> back and finally updated my site. Ever since than I
can't get me Flash
> file to
> show. It works fine in the preview (in dreamwaver) but
not on the web. All
> the
> files are on the server and the coding looks ok. I can't
figure this one
> out
> and its driving me crazy.
>
> Here is my site:
>
>
http://www.wsrestoration.com/
>
> Mike
>

Similar Messages

Where can I get help re: a file missing from Pages in iCloud?

Where can I get help re: a file missing from Pages in iCloud?

If the file was also on a mac, then there was a local copy of the file in ~/Library/Mobile Documents. If you use Time Machine or any other backup program on your computer, then try restoring the file(s). Similarly the same thing would be done on a PC, but I'm not sure where the icloud local copies are kept.

[svn:fx-trunk] 10506: New TLF file missing from svn 10505.

Revision: 10506
Author:   [email protected]
Date:     2009-09-22 10:43:46 -0700 (Tue, 22 Sep 2009)
Log Message:
New TLF file missing from svn 10505.
Added Paths:
    flex/sdk/trunk/frameworks/projects/textLayout/textLayout_edit/src/flashx/textLayout/opera tions/CopyOperation.as

Revision: 10506
Author:   [email protected]
Date:     2009-09-22 10:43:46 -0700 (Tue, 22 Sep 2009)
Log Message:
New TLF file missing from svn 10505.
Added Paths:
    flex/sdk/trunk/frameworks/projects/textLayout/textLayout_edit/src/flashx/textLayout/opera tions/CopyOperation.as

[svn:osmf:] 14905: Adding file missing from previous commit.

Revision: 14905
Revision: 14905
Author:   [email protected]
Date:     2010-03-22 05:37:59 -0700 (Mon, 22 Mar 2010)
Log Message:
Adding file missing from previous commit.
Added Paths:
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/assets/fonts/
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/assets/fonts/Standard0755.swf
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/assets/fonts/readme.txt

If you're confident that the DP contains the new file, try deleting the deployment and re-doing it (not the deployment type - just the deployment to your test collection).
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

[svn:osmf:] 14904: Adding file missing from previous commit.

Revision: 14904
Revision: 14904
Author:   [email protected]
Date:     2010-03-22 05:32:49 -0700 (Mon, 22 Mar 2010)
Log Message:
Adding file missing from previous commit.
Added Paths:
    osmf/trunk/libs/ChromeLibrary/org/osmf/chrome/hint/
    osmf/trunk/libs/ChromeLibrary/org/osmf/chrome/hint/Hint.as

If you're confident that the DP contains the new file, try deleting the deployment and re-doing it (not the deployment type - just the deployment to your test collection).
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

[svn:osmf:] 10540: Adding file missing from previous commit.

Revision: 10540
Author:   [email protected]
Date:     2009-09-23 11:39:41 -0700 (Wed, 23 Sep 2009)
Log Message:
Adding file missing from previous commit.
Added Paths:
    osmf/trunk/framework/MediaFrameworkFlexTest/org/openvideoplayer/gateways/TestHTMLGateway. as

If you're confident that the DP contains the new file, try deleting the deployment and re-doing it (not the deployment type - just the deployment to your test collection).
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

UCM 11g File missing from search result although file is accessable

When I do search without any criteria in UCM 11g, some files missing from search result although I know the files were checked into UCM already since I'm able to see these files using url similar to:
http://ucm/cs/idcplg?idcService=GET_FILE&dID=12345
or use following url to get document information:
http://ucm/cs/idcplg?idcService=DOC_INFO&dID=12345
the file is not in the search resule even search by ID.
also, the seach result say "displaying 1-20" but only display few files (e.g. 2 files, less than 20)
Is this a known problem? the same search was working in UCM 10 perfectly.
Thanks

The query seems able to retrieve the missing document. for example, I search by content ID, in the audit log (eanbled as you mentioned) give th efollowing information:
fusionappsattachments/6 09.13 06:22:03.878 IdcServer-3474 --- @ResultSet SearchResults ---
fusionappsattachments/6 09.13 06:22:03.878 IdcServer-3474 numFields=66,*numRows=1*,currentRow=0
also, the infomation following above give the deteail field information which match with the missing document.
I looks like UCM just did not bring it to UI as part of search result.
This seems match with my another finding as I mentioned earlier: the seach result say "displaying 1-20" but only display few files (e.g. 2 files, less than 20)
it seems query did find the documents but UI did not show it.
Not sure if this is a known bug.

How to display flash file in adf pages

how to display flash file in adf pages need help

Thanks all,
It is resolved.
the code i am using to display a flash is below.
<f:verbatim>
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version
=10,0,0,0" width="300" height="300" id="11gR1_aniH_grey" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="allowFullScreen" value="false" />
<param name="wmode" value="transparent" />
<param name="movie" value="mx2004demo.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#4d5c64" />
<embed src="../Images/mx2004demo.swf" quality="high" width="300" height="300" name="mx2004demo.swf" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false"
type="application/x-shockwave-flash" wmode="transparent"
pluginspage="http://www.adobe.com/go/getflashplayer" />
</object>
</f:verbatim>

[svn:osmf:] 13186: Adding files missing from previous commit.

Revision: 13186
Revision: 13186
Author:   [email protected]
Date:     2009-12-23 05:26:07 -0800 (Wed, 23 Dec 2009)
Log Message:
Adding files missing from previous commit.
Added Paths:
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_up.png

I just checked my original file and it is 30fps...
Also other clips from the same camera were correctly finalized, just this one clip "disappeared".
Any ideas anyone?
Thanks.

Files missing from install directory

not sure what's happened to my computer but I can no longer install programs or updates for programs as I get the message "files missing from install directory"
How did they get corrupt in the first place? I get this when trying to download yahoo messenger of all programs...duh! I'm getting pretty frustrated since this has only started a month ago and I've been hoping something would fix itself but no....the last time my Toshiba service station updated was Jan 24 and now it says unable to connect with server....yet I got here to post a message and can get to the internet so don't understand why the updates can get in?
any advice?

that can be a problem with your windows.. your OS..
rebuilding your OS should be able to fix it.
oOo
*Read EULA before installing any software.
√

File/Import and Page Layout not working anymore

I have a question about old software: FrameMaker 6.0 on a Mac. (While Adobe encouraged me to purchase this in 2001 for the chemistry textbook I am writing, I had invested to much to abandon it when Adobe abandoned the Mac version a few years later.)
I have imported dozens of images files into the 750 page book and FrameMaker has accepted both tif and jpg formats. The way I did it was to create an anchored frame in the textbook, click on it, and then File>Import and select the image file and then choose whether I wanted it to be referenced or actually in the text. All of this worked fine... until a couple of days ago.
Problems
1. I no longer get Import as an option under File and
2. FrameMaker no longer recognizes tif and jpg files under "All Readable Documents" when I do File>Open. I have to click on Show All Files to see them.
As a result I am unable to import any tif or jpg files into the FrameMaker textbook.
What's curious is that I have 6.0 installed on both a G4 and a PowerBook and this problem has occurred on both at the same time.
3. And I just discovered that when I do Format/Page Layout the half a dozen or so custom formats that I had are no longer listed.
So what has caused this loss of memory for Framemaker that it can no longer do what it has done for me for years. (I am somewhat sympathetic to it's memory loss myself as a 78 year old user.)
The G4 has been unplugged recently but in the past it has been unplugged for a week or so and there were no problems.
Fred Tabbutt

adiabatic wrote:
I have a question about old software: FrameMaker 6.0 on a Mac. (While Adobe encouraged me to purchase this in 2001 for the chemistry textbook I am writing, I had invested to much to abandon it when Adobe abandoned the Mac version a few years later.)
I have imported dozens of images files into the 750 page book and FrameMaker has accepted both tif and jpg formats. The way I did it was to create an anchored frame in the textbook, click on it, and then File>Import and select the image file and then choose whether I wanted it to be referenced or actually in the text. All of this worked fine... until a couple of days ago.
Problems
1. I no longer get Import as an option under File and
2. FrameMaker no longer recognizes tif and jpg files under "All Readable Documents" when I do File>Open. I have to click on Show All Files to see them.
As a result I am unable to import any tif or jpg files into the FrameMaker textbook.
What's curious is that I have 6.0 installed on both a G4 and a PowerBook and this problem has occurred on both at the same time.
3. And I just discovered that when I do Format/Page Layout the half a dozen or so custom formats that I had are no longer listed.
So what has caused this loss of memory for Framemaker that it can no longer do what it has done for me for years. (I am somewhat sympathetic to it's memory loss myself as a 78 year old user.)
The G4 has been unplugged recently but in the past it has been unplugged for a week or so and there were no problems.
Fred Tabbutt
I don't know if read-only files are recognized by FrameMaker to the point where it will dim commands that need to write to the files.
It's always a good idea on Mac to repair permissions with Disk Utility - make sure you have good backups, just in case.
Have you tried saving a file that can't import as MIF, then opening the MIF version to restore the file, and perhaps lose any corruption in it? This is called the "MIF Wash."
I think the latest Mac OS that FrameMaker can work with is system 9, or the Classic simulator that runs on the OS X release called Tiger. I'm sure you'd know if you changed operating systems in this period. Classic won't run on Intel Macs.
I have no other clues about what might cause this, except the general thought that something has changed on your systems or in the files you're working with. Does the problem persist in a brand-new file you create on your local drive? If you're working with FM files on a network, have you tried the process with files on your local computer drive? Have you quit FrameMaker and restarted your Macs? Any change? If you have a cloned bootable backup of your stuff from before the problem arose, you might want to try cloning your problematic drive to a new bootable backup, then restoring the known good clone, to see if it works.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Multiple projects, yet one flash file launched from browser

Hello everyone, I glad to be a part of this wonderful community. I have a really sticky Captivate 4 problem, and I wanted to get my feelers out there now before I really need to get this done before the end of the week. This question has to do with publishing. I have 7 project files, and I created a "menu" slide at the end of each of them that look exactly the same. In this particular slide, there are 7 'click boxes' spread throughout the page that launch all the other projects. If you are wondering why I did this, it's because I'm trying to cut back on load time when a user click on any individual project. Now, my programmer can only launch one .swf file from our webpage to get the first project started. So, does this mean Captivate will dynamically handle launching all of the other projects(assuming multiple flash files are created) when they are launched from these "menu" slides? I'm a bit confused. I'm likely confusing some of you as well. It is hard to put the problem into writing. Please help!

Okay, so lets look at the problem, shall we?
You created seven projects. But you later asked:
So, does this mean Captivate will dynamically handle launching all of the other projects (assuming multiple flash files are created) when they are launched from these "menu" slides?
First off, with seven different projects, you end up with seven different outputs. Assuming you are using Captivate in the basic form, you will end up with seven different SWF files and seven different HTM files that need to be factored into things. You may have more files than that, depending on your options used.
When you create the links using the Click Boxes, hopefully you used the option: Open other project. This means that when the user clicks, the other SWF/HTM or EXE (depending on output) will be launched.
I'm sure you will have other questions. So just post back either in threads of their own or by replying to this thread.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

To Display SWF file or Flash file in Web Page Composer (WPC)

Hi,
I am goning to add & display 'swf file or flash file' in <b>Web Page Composer</b>.
But it is not allowing me to do so.I tried by three ways
1} to upload this file directly from local machine & to add in WPC
2}By using linklist option
3}By creating KM Document iview;which contain swf file.& then adding that iview in wpc.
but at last it is not displaying though allowing to add it in WPC.

Vishal -
First... we are all new to WPC!
Second, no I don't think you need to create a new container. I think that you just need to add the swf type as an allowed type for the container.
So...
Figure out which container you are trying to add the flash file to (as you mentioned, A1, A2, etc).
Navigate to:
Sys Admin --> Sys Config --> Knowledge Mgt --> Content Mgt --> WPC --> Containers.
Edit the container you want to use.
There will be a box named Allowed Mime Types.
In here, select the "swf" mime type (make sure the check box is checked). Then Save.
At my company, we had the WPC ramp up from SP12, and are now on SP13.
I'm not sure what you get if the first time you had WPC is SP13, but for us I see two default A1 (and A2...B1..C4...etc) containers -- one that has "default" in the name and one that has "def" in the name. From what I see, SP13 WPC uses the one with "def" in the name, not "default". So, make sure you modify the one with "def" in the name.
After you make this change, you should see "swf" in the list inside the container when you are editing a page.
Is this clearer? I wish I could attach a screenshot.

Files missing from library after archive and install

Hi forum folk
any help you could give would be much appreciated.
I can't seem to verify my permissions on HD. I have run disk utility both from finder and from my OSX startup disk and consistently get the error message "Disk Utility has lost its connection with the Disk Management Tool and cannot continue." I then reinstalled the operating system all together making sure to archive and install as well as archive previous network and preference settings. This means I am running 10.3.4 at the moment (and I can't verify any of the software updates at the moment). After reinstalling I still cannot verify my permissions, so now I am trying to back up all my files so that I can reinstall the OSX again, erase everything, and start from scratch. But I'm running into some very strange problems while doing this. select files are missing from ~/library. there is no Safari file, for example. I tried looking in HD/previous systems/library where my library files were saved before I reinstalled the operating system but there is no such folder in there either. this means all of my bookmarks are gone. additionally, under library/preferences (in both the old and new library folders) there is no file named com.apple.itunes.plst. so all of my itunes playlists are gone as well. these are the only missing files I have found thus far and i can't explain why they selectively would not have been saved after the archive and install. Everything else seems to be intact. Any ideas?
thanks
jb
powerbookG4 Mac OS X (10.3.9) running 10.3.4 at the moment - can't verify permissions on 10.3.9

jbeep:
my HD has a capacity of 8.85 GB available. When I reinstalled panther I had little more than 3 GB available (I deleted a bunch of unneeded things since then)
Thanks for this update. What is the total formatted capacity of your HDD? I ask because I suspected that you might be cutting it pretty close. The rule of thumb is that you should have 10-15% of your total capacity available as free space. My personal rule is 15%-20%. This allows for more efficient perfomrance of OS X.
I am in the process of backing up everything on my seagate combo USB 2.0/firewire 200 GB external (I am using the firewire cord)
Having an up-to-date backup is one of the primary rules, often observed more in the breach than not. Since you have an HDD that supports Firewire, I suggest that you make a bootable clone of your entire HDD using SuperDuper. You can then use this backup as an emergency boot drive. However, it must be Firewire, as PPC Macs don't boot from USB devices.
I also have heard that it is advisable to reinstall the OS "every now and again" and I hadn't done this for at least two years. was I ill-advised?
Most experienced Mac users never re-install, except under dire circumstances. Since installing my new HDD in this computer I have never re-installed. Re-installation is the utlimate intrusive measure, and it exposes one to all kinds of issues, from lost data, to flawed installaton, to installations that fail midstream. Re-installation is not an effective maintenace procedure. Here are some helpful links in terms of maintenance:
Mac OS X 10.3/10.4: System maintenance
Macintosh OS X Routine Maintenance
Maintaining OS X.
I'm going to restart now and try and verify my permissions again using the procedure on the above link. I'll let you know what happens.
Instead of verifying permissions, just go ahead and Repair Disk Permissions. Verifying permissions does nothing, and wastes your time, as it is difficult to tell whether you need to repair, and you have to repair anyway.
Do post back with an update of your progress and any further questions or comments.
Good luck.
cornelius
Message was edited by: cornelius

Flash File in Logon page

Hi there,
i want to create a new Portal Logon Page.
I want that a Flash File is playing at the Logon Screen.. top left.
I changed the umLogonTopArea.txt to the following:
<td valign="Bottom" align="left" class="welcome">
          < img src=" <% =webpath %> layout/ test1. swf" alt="" border="0" >
        </td>
But when i open the Logon Screen i see Only a RED X... it did not load the Flash File.. can somebody explain why?
Thanks
Bjoern
Edited by: bjoern bayerschmidt on Mar 19, 2009 12:36 PM
Edited by: bjoern bayerschmidt on Mar 19, 2009 12:36 PM
Edited by: bjoern bayerschmidt on Mar 19, 2009 12:37 PM
Edited by: bjoern bayerschmidt on Mar 19, 2009 12:37 PM
Edited by: bjoern bayerschmidt on Mar 19, 2009 12:37 PM
Edited by: bjoern bayerschmidt on Mar 19, 2009 12:37 PM

Hi,
Chk this code
The flash file is stored inside image folder of logon par file
<table width="749" border="0" align="center" cellpadding="0" cellspacing="0">
               <tr>
                    <td><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,0,0" width="749" height="259">
                      <param name="movie" value='<%=webPath +"/images/flash_header21.swf"%>'>
                      <param name="quality" value="high">
                      <param name="menu" value="-1">
                      <param name="AllowScriptAccess" value="always">
                      <param name="WMode" value="Transparent">
                      <param name="AllowScriptAccess" value="always">
                      <embed src='<%=webPath +"/images/flash_header21.swf"%>' quality="high" pluginspage="http://www.macromedia.com/go/getflashplayer" type="application/x-shockwave-flash" width="749" height="259"></embed></object>
                    </td>
               </tr>
           </table>
Regards
Baby

Flash file missing from page/layout difficulties

Similar Messages

Maybe you are looking for