Flash file not running on preview

But it will run when I click the play button in
Dreamweaver... But the site will not load or run the swf
file....

PS... the same file runs from a hosted server, but not when
the files are loaded on local machine....

Similar Messages

Unwise.exe Files not run on Windows 8.1 SSSS

So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
what should i do?
Reply Please!

So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
what should i do?
Reply Please!

Flash files not displaying in Firefox, Safari, and Opera. Most recent Shockwave installed, private b

Flash files not displaying in Firefox, Safari, and Opera. Most recent Shockwave installed, private browsing active in Firefox? Works perfectly in Chrome and Internet Explorer. HELP!!!!

I suppose it would have helped if you knew what it was supposed to look like! I'm using Shockwave Flash 11.7.700.169 and the version of Firefox I'm on is 20.0
When you see it in Firefox - do the thumbnail populate the grid? See attached populated and un-populated.
Populated grid is with Chrome.
Thanks!
Thanks in advance!

Flash file not responding if more than 1 flash file.

product : Adobe Flex Builder ver 2.. HELP required urgently..
I'm very new to Flex. in my adobe FLEX page, i'm displaying 2
flash file (.swf). the flash file itself pop-up data based on click
on the adobe flash file. however only 1 flash file (first flash
file) responsds and 2nd flash file loaded but NOT responding to
click and no data pop-up in the 2nd flash file.
However, if i change the order of FlashLoader2.load("file"),
the 2nd flash file responding and the 1st flash file not
responding. so, we can conclude that flash file is ok. anything
need to change in adoble flex???? pls help.
thanks

ar tech,
I think that your problem is to do with layering. You have
specified both loaders to have width and height 100% so (unless
there is more to your code than you have posted) they will sit on
top of each other. In that case unless you have done some clever
code to pass on the mouse request, it will get swallowed by
whichever one is on top (hence the change of behaviour when you
alter the order of loading).
It sounds from your description as though they actually sit
in different screen areas, so maybe try changing the location
parameters and see if both respond when you put them side by side.
Richard

Adobe Flash will not Run

I have gone through all the forums and installed and uninstalled flash 3 times. I have gone through the active-x control and still now luck...it wont run although its showing as a successful install. I am running Windows 7 Home Edition with IE 9 version 9.0.8112, 64 bit operating system with 4.00 RAM.
I need help...this is frustrating. I have tried logging onto my son and wife user name on this computer and still flash will not run.
Thanks in advance for the help.

See if any of this helps:
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

Why my flash files dont run??

Hi, im creating a very basic web page using Dreamweaver Cs3 and Flash Cs3.
I created my flash files, inserted them on my html pages on Dreamweaver and tryed them locally, they work fine, but when i uploaded the files to the ftp server the flash files wont run, everything else works perfectly but the flash files.
I uploaded eveything to my FTP, the web page is http://www.aleduran.com and if you try http://www.aleduran.com/logo.swf you can see the flash file works, it just wont run on the main page.
Help.

Dreamweaver created a folder called scripts when you inserted the Flash onto the HTML document. Upload that folder and you will be good to go.

Flash file not opening in XP system

hi...
      I did one flash file by using Action Script 3.0. That SWF running in Vista and Windows7 systems but it not running in XP systems.
     What the Resion for that..

no.. is there...
         Other SWF files are Running...

Flash installed and up to date however flash does not run on any web browser

I was catching up on watching a televsion show and watching it with no issues/no problems with flash before. I went to the website below and all of a sudden flash is not working. I did not change any settings, run any updates. I checked various browsers, flash content is not working on any of them. I can view youtube videos however just about any other site I've tried, nothing and many websites will not display correctly. I tried some of the troubleshooting suggestions in the forum however some of them I'm unable to do such as alter the flash settings, it takes me to the page but tells me I don't have Flash installed. I've tried switching user accounts on my pc as others have said flash works for them on the other account however mine is still broken. I've actually tried a system restore, still no luck.
Windows 8 (64 bit)
Flash Version 11.9.900.152
Tried web browsers IE, Firefox, Chrome - I've verified it is enabled
Active X is disabled
I've ran the 'test' to verify Flash is installed and it displays the video
I ran the debugger however I do not know how to interpret the data.
PLEASE HELP!!
Request Displayed
#1 - SiteCatalyst Image 1564 chars
Friendly Third Party Cookies
om.cbsi.com
Report Suite ID(s)
cnetcbscomsite, cbsicbsiall
Version of Code
H.25.4
Query String Beginning
1
Sent From JavaScript File?
1
Date/Time
December 8, 2013 at 10:27 PM
fid=30F75FA127AB1EDA-2ECCBA4ED7B2A80F
Name Space
cbsinteractive
pageName
cbscom:The Big Bang Theory - The Discovery Dissipation:The Big Bang Theory:The Big Bang Theory Video The Discovery Dissipation CBS com:p1:video:the big bang theory:comedy:primetime
Current URL
http://www.cbs.com/shows/big_bang_theory/video/
channel
primetime
prop1
cbs.com
eVar1
D=c1
prop2
us
eVar2
D=c2
prop3
responsive web|||desktop
eVar3
D=c3
prop5
cnetcbscomsite
eVar5
D=c5
eVar6
primetime|comedy|the big bang theory|video
prop7
D=g
eVar7
D=g
prop8
The Big Bang Theory Video - The Discovery Dissipation - CBS.com
eVar8
D=c8
prop9
D=User-Agent
prop10
video
eVar10
D=c10
prop11
primetime:video
eVar11
D=c11
prop12
6711
eVar12
D=c12
prop13
19650
eVar13
D=c13
prop20
The Big Bang Theory Video The Discovery Dissipation CBS com
eVar20
D=c20
prop21
D=c20
eVar21
D=c20
prop22
D=c10
eVar22
D=c10
prop30
cbscom:UqU4QwoZASUAAGHo9yEAAAA5
eVar30
D=c30
eVar49
ishd
eVar54
Less than 1 day
prop60
not set
eVar60
D=c60
prop61
comedy
eVar61
D=c61
prop62
D=c60
eVar62
D=c60
prop63
cbscom:10|The Big Bang Theory
eVar63
D=c63
prop64
cbscom:1933E590-B255-5B32-E778-BF122477716C|The Big Bang Theory - The Discovery Dissipation
eVar64
D=c64
prop65
7
eVar65
D=c65
prop66
D=c65
eVar66
D=c65
hier1
cbscom:primetime|comedy|the big bang theory|video
Screen Resolution
1600x900
Color Depth
24
JavaScript Version
1.6
JavaScript Enabled
Y
Cookies Supported
Y
Browser Width
1600
Browser Height
814
Connection Type
lan
Home Page?
N
Query String End
1

Hi there
Sorry, but you aren't in the right place for getting help with this. Try clicking the link below and choose a forum dedicated to Adobe Flash.
Click here
Best of luck to you in resolving your issue! Rick

Flash swf not running properly in captivate

Hi,
I'm not sure if this is a flash question or a captivate question so I'm posting it to both forums. I have numerous flash cs5 built swfs inserted into a captivate 5 project. All of them are running fine apart from this one. It runs perfectly outside of captivate but within the captivate swf it goes haywire. It's a very simple fla. The only actionscript involved is a stop action. There is a movie clip that uses a number of classic tweens and then there is a layer containing textual explanations for what's happening in the movie clip. When I run my captivate project the swf does one or other of the following:
a) it runs but the movie clip starts earlier than the text and so they are out of synch
b) the text runs as normal but the movie clip does not run at all
c) it only shows the final frame of the swf and nothing else happens.
As I say, it is a very simple fla and I'm at my wits end trying to figure out what's wrong. I don't seem to be able to attach the fla here, so if anybody thinks they may be able to help please pm me with your email address and I will email you the fla file.
Just to note some of the things I have already considered: the text is all set to classic rather than TLF. The captivate project and the fla both publish as3 at 12fps for flash player 9.
yours hopefully!
Maedhbh

See http://forums.adobe.com/message/3327323. I am having the same problem and this may help you out.

SWF files not running from some lab computers

Hello,
Our Flash lab is experiencing strangeness on 8 of its 28 computers. When students create an animation and export it as an SWF file, the animation will not run. They can play the animation from within Flash itself (Enter cmd... watch the timeline progress)... but it just won't run as an SWF file.
SWF files that are created on any of the non-problematic computers will run on the problem computers, but not the other way around (problem computer> good computer).
I'm not familiar enough with Flash to troubleshoot this problem. I know that the entire lab was created from one image and all the computers are the same model Dell, running Creative Suite 4 Premium on XP Pro. It is becoming an issue for students as the lab is full and they are having trouble completing their assignments.
Does anyone have an idea of what's going on... or where to start looking?
Thanks,
Alan

Thanks for the reply Ned. I've checked and the lab is still at the same version. I did find that if we recreated the student's profile and they started out on one of the "good" computers that any future work on a "bad" computer would work.
I also narrowed it down to a 3D animation... not just any animation that wouldn't work. It seems like the program isn't loading up everything when a student starts Flash for the first time on one of the "bad" computers. Students that first start on a "good" computer can run 3D SWF files successfully on a "bad" computer.
Well, at least recreating the student profiles is a bandaide fix for now. But I'd like to figure out what went wrong with those 8 computers (I did reload CS on a couple of them... didn't help).

Flash file not appearing

Help! Please be kind enough to look at my code for this page
and see if you can figure out why me Flash file is not showing up.
The page plays perfectly when previewed in Firefox and Safari
directly from Dreamweaver. And yes, my Library folder with the
Home.swf file is on the server.
http://www.geocities.com/bchamp11/
Thanks.
Bill

This line:
<script src="Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
is inserted by DW8.0.2 when you insert a Flash movie.
It'll preview OK locally but you need to upload the Scripts
folder (which
DW8.0.2 created and Adobe neglected to tell you about) so
that the Flash
movie will view OK online.
Regards
John Waller

Network UNC paths and SWF files not running.

Flash Player wont run SWF files from a network unc path. A map drive works. How can I resolve this?
Our user profiles in window 7 are roaming and the my documents redirects using a unc path to the my documents area. When the swf file is run, you just get a white background in the player. The standalone player is version 8 . We also deploy the latest flash player plugin for ie9 browser (currently 11.3).
I have tried adding the unc path \\servername\pathname to a .cfg file in C:\Windows\System32\Macromed\FlashPlayerTrust as described in the flash player administrator guide. This did not work.
I have also tried to update the global security settings panel with the unc paths required and copying the settings.sol file to users profiles but this has not made any difference.
Can anyone help?
Many Thanks
Mark

Thanks for replying Jeromie.
After a bit of digging, I discovered that the problem was with the profile path for users. I am not sure why, but when the profile path contains the fully qualified domain name in it , flash player fails i.e \\server.domain.co.uk\sharename\flash.swf. when the path was changed to \\servername\sharename\file.swf , it worked.
I changed all the users profile paths and removed their appdata to and now all users can play flash files with the new profile path.
Regards
Mark

.ipa file not running on iphone

Hi,
Apps created by using Flash CS5.5 executed on apple device successfully.
But nw I want to execute any .swf app on iphone/ipad from command prompt.
So, I downloaded simple helloWorld.swf file from http://www.mediafire.com/?bf2f9uii1h1xksb
& using "adt" command I created it's .ipa file.
Bt the problem is that it is not running in my iphone means app icon come there bt launched with white blank screen..
What may be the problem?
Thanks,
Sampada

Although you called it a simple hello world swf, it's not simple. It does show "hello world", but the code it is running involves an RSL Preloader, and it's accessing external URLs. Specifically it downloads a Flex framework file. That isn't something that you'll get away with when making iOS apps.

Flash video not running in Captivate 7

Hi. I created an .swf file that has a short Flash video (.flv) file and audio file associated with the very first slide. The audio runs fine, but the .flv file does not run. Instead, I get "connection error" notice where the video should display.
Any clue why this is occurring and how I can get the .flv file to run?
Thanks,
- Michael Fekete

Placing video and audio on the very first slide of a project is never a good idea. Put them on the second slide at least. With video, you might end up significantly delaying the playback start if it's too heavy.
If you're testing this on your local hard drive, your issue might be due to Flash Global Security settings. Read this post:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security
If you're testing this from a web server, your issue might be that the web server is not set up to serve FLV files. Talk to your server admin to verify the FLV mime-type is supported. If you are able to link directly to the FLV file on the web server, try to play it in your browser directly. If that works, then the mime-type is supported but your connection error might be something else, e.g. using spaces in filenames, using mixed case filenames on a web server that doesn't handle mixed case without breaking links etc. Lots of potential reasons.

Is there a way to open powerpc installer in Mavericks to just install library files (not run power pc app)?

Hello, I was looking to install some files from a power pc program. However, I have osx x mavericks. I know the deal, since snow leopard apple swicthed to intel processors. I was wondering since I only need to install files and not install and run a powerpc app ,is there any way I can get the installer open to grab these files that I need? I just need the files, not to run the program, there has to be a way around this without having to run a program like paralells or to run a dual boot with leopard on another drive?
I'm trying to run a music plug in instrument program in Logic and I have everything installed except for the actual sound libraries wich need to be installed off this power pc installer. I went to the companies website and downloaded and installed all of the latest updates. I then ran a report which is telling me that I just need to install the missing library files (on the powere pc installation). Which I find confusing since I thought the whole point of the update i nstall was a way around that? Any help would be appreciated, thanks for your time.
Mike

MikeThomasmusic wrote:
...there has to be a way around this without having to run a program like paralells or to run a dual boot with leopard on another drive?
In my experience advising Logic users, depending upon the version of Logic and the model Mac you are using, if your Mac will boot from Snow Leopard, you can install Logic and all of its plug-ins in Snow Leopard and then upgrade to Mavericks.

Flash file not running on preview

Similar Messages

Maybe you are looking for