Flash file zooms but buttons don't stay where they should

I've attached the example files I'm working with. I have a zooming component that zooms in my flash file by loading it with an .xml file, but the buttons don't stay over the buttons once it gets loaded into the component. The buttons move off into space.
Do you see what the issue is?

I think what is happening is that the whole file is scaling which is somehow messing up the positioning of the buttons.
Here's what I've done so far:
- create a movie clip of .swf file toolip and center it.
- the zoom_test.swf loads in the 2008_19.swf file to be zoomed and panned via the data.xml file
Since I created a movieclip of the .swf file tooltip, when you open up 2008_19.swf, the tooltip does not rollover the button anymore,
it is a little further away from the button.
I'm not sure what you mean by scaling the parent, because with this functionality, the whole file, 2008_19 is being scaled.

Similar Messages

I just upgraded to a new computer running Windows 7 from an old one running XP. I would like to transfer all my bookmarks but I don't know where they were and where to move them to in the new computer. Thank You.

I just upgraded to a new computer running Windows 7 from an old one running XP. I would like to migrate my old bookmarks to the new computer but I do not know where to find them or where to migrate them to.
I do have the old computer's disk drive.
Thank You.

See https://support.mozilla.com/en-US/kb/Backing%20up%20and%20restoring%20bookmarks
and
https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information?s=new+computer&r=4&as=s#os=win&browser=fx8

I have installed Adobe Flash Player 9 but i don't know where i could find it

help me,please.! thanks.! thanks.!
thanks.!ÜÜ

Hi freenshesa20,
If you need to install Flash Player, please get it here:
http://www.adobe.com/go/getflashplayer
If Flash Player is installed and you are looking for the
installed files they are here:
C:\WINDOWS\system32\Macromed\Flash
If you want to test Flash Player to see if it is correctly
installed, please go here:
http://www.macromedia.com/software/flash/about/

My computer has 8g of photos but I don't know where they are!

I think I may have done something in the past to mess up the library since I can't figure out what is going on. My disk is full, only 1.7 g left- I downloaded whatsize to see why, and it shows over 8 gigs in my photos, but I only have 500 photos, jpg's, in it. I delete photos using the delete button, usually, and empty the iphoto trash. My preferences to copy to the library folder is checked and always has been I believe. My screensaver shows pictures I long since deleted, or so I thought, from "iphoto library".
I have read Terence's instructions to others on rebuilding a new library- will this get rid of these unwanted photos? I did not know not to mess with iphoto from anywhere but iphoto til now, I likely moved or renamed something in the past. Where the bloody **** are they and what should I do? Am I deleting wrong? Thanks for any help for an artist struggling to use the other side of her brain.

my total library is 680 mb, nowhere close to the 2.08 in the pictures folder. I am obviously messing up.
Actually you’re not.
The iPhoto Window reports the size of the library that would result if you exported all the current versions +and nothing else+ to a folder on the desktop.
The iPhoto Library Folder contains the Original, Modified and thumbnail versions of your pics. It also contains various cache and database files +all of which are necessary+ for the working of the Library.
Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
You can run a Library on an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

I have messed up the settings on my Mighty Mouse and don't know where they should be. I cannot open a document by double-clicking anymore. I don't know what setting adjusts that.

I need help with my Mighty Mouse settings. Don't understand the settings. I can no longer open a document by double-clicking. I think I changed my setting someway when I was trying to correct or find my up and down scrolling. Please help.

I think you need to un-pair your mouse. Leave it a few minutes than re-pair it as if you were starting from scratch and using the following details. Item 1 will probably meet your needs.
Troubleshooting wireless mouse and keyboard issues

HT4796 I did all of the above and the migration was successful, but I don't know where the files are. It says they're under a different user, 'owner' . I tried to access via sys pref/system/users&groups, but it asks for a password for owner which I don'

Migration Assit , PC to MAC - The migration was successful, but I don't know where the files are. It says they're under a different user, 'owner' . I tried to access via sys pref/system/users&groups, but it asks for a password for owner which I don't have. What must I do to access my files?
My experience is with MS PC's I'm new with the MAC Book Pro.

Then, see if this works:
Mac OS X 10.6 Help- If you forget your administrator password
If you are running Lion or Mountain Lion you may need to do the following to access the same utility:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.

I had a drive failure and lost the iWeb file along with other things. I did manage to save a lot of user file documents but I don't see or recognize the my iWeb site file. It was on a 15" G4 Titanium pb. I'm trying to find a way, using version 2.0.4

I had a drive failure and lost the iWeb file along with other things.
I did manage to save a lot of user file documents but I don't see or
recognize the iWeb site file. It was on a 15" G4 Titanium pb.
I'm trying to find a way, using version 2.0.4 of iWeb on a different
pb to recover the file into the iWeb app or a way to download the site into iWeb.
There are 6 pages of images and text, and it
would be a task for me to recreate the whole thing again. I did
download the site but I don't know how or if I can get iWeb to see it and open it.
Does anyone have any knowledge about this? The link to my site:
<http://web.mac.com/danauerbach>
Any suggestions will be most appreciated.
dan auerbach
[email protected]

Unfortunately iWeb cannot read or import previously published files, only generate them. You'll have to recreate your site from scratch.
However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
OT

Hi, how do I manage storage? Disk Utility says "other" is taking up most of my storage but I don't know where to find "other". Please help!

Hi, how do I manage storage? Disk Utility says “other” is taking up most of my storage but I don’t know where to find “other". Please help!

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper 2>&-
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

All my photos are somewhere but I don't know where

Have mac OS X Yosemite 10.10.3 .just updated to the new iPhoto and now all my photos are somewhere but I don't know where....they are in my iMovie application but not on Photos....can anyone tell me how to get them back? I thought I had solved the problem by Finder/my files/pictures/originals/photo library.... they were all there then it suddenly quit and it all disappeared again? Help! Thank you.
<Re-Titled By Host>

Do you still see your photos, when you launch iPhoto and not Photos?
Where did you keep your iPhoto Library? In your Pictures folder, as is the default? Or on an external drive?
Look in the folder with your iPhoto Library.
You should be seeing two libraries, if you already let Photos upgrade the iPhoto Library:
Your iPhoto Library, now called .migratedphotolibrary
and the new Photos library:
are the libraries there? and how large are they?

I used migration assistant to transfer files from my old compaq laptop to MBP but I have no idea where they are??

I used migration assistant to transfer files from my old compaq to Macbook pro but I don't know where to find all my pictures and music in the MBP. Where do they go?

I have now migrated my stuff again - I think the problem is that I clicked skip this user on previous attempts. Now I have 4 different users, one has my photos, one has my music and another has my documents as well as the one that is my usual one. I just need to figure out how to get the pics and music into the one I'm using day-to-day and I'll be sorted.

My iphone has been water damaged and in the mean time ive gone back to using my old phone. But i need to get all the contacts from my iphone i had synced to my laptop, but i don't know where to find them and im not sure if ive backed them up to anything!

my iphone has been water damaged and in the mean time ive gone back to using my old phone. But i need to get all the contacts from my iphone i had synced to my laptop, but i don't know where to find them and im not sure if ive backed them up to anything!

If your contacts are synced to your computer then they are in the supported app you are syncing with.
When you set up syncing of contacts on your device, which application did you select?

Hello! I understand I can download Adobe Illustrator CS2 for free but I don't know where to

Hello! I understand I can download Adobe Illustrator CS2 for free but I don't know where to. Can somebody help me out with this? Thank you very much.

Hello Stanislav,
to my knowledge these downloads in Download Acrobat 7 and CS2 products is subject to certain conditions, for example: "The serial numbers provided as a part of the download may only be used by customers who legitimately purchased CS2 or Acrobat 7 and need to maintain their current use of these products."
Hans-Günter

Have downloaded i Tunes 10.5.1.42 but get an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??

Have downloaded i Tunes 10.5.1.42 but get an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??
Is a copy of the CFNetwork file available for download if mine is corrupted?
Thanks

get an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I'm a CC member and I've downloaded and installed Adobe Flash Professional CC, but it will not open. How should I proceed?

I'm a CC member and I've downloaded and installed Adobe Flash Professional CC, but it will not open. How should I proceed?

You can try:
creative cloud desktop failed to install
Downloading and installing desktop apps from Creative Cloud
Problems with Creative Cloud (apps not starting)
Hope it helps you.
Regards
Rajshree

I had a suscription that is over .Now I have a promotional code (for new suscription) but I don not know where introduce it ( I use PC)

I had a suscription that is over .Now I have a promotional code (for new suscription) but I don not know where introduce it ( I use PC)

Moving this discussion to the Adobe Creative Cloud forum.

Flash file zooms but buttons don't stay where they should

Similar Messages

Maybe you are looking for