Flash Files failed to open - HELP!!

Hey, can somebody please help me out, I have been getting this problem everytime i try to save my document. I am tryin to make a a flash website for a collage project.
I made the design in Photoshop and imported it into Flash. It works fine untill i save it close and try to reopen it again.
I keep getting this message.
I have tried saving it in different locations. same thing happens.
any ideas on how i can recover and also how i can stop this from happening? I tried opening on differnt computers, Im on a PC here at home but the same thing happend on the iMac in collage.

Ok thanks, Ned, that is a good suggestion and i Will change the folder names but ALL of my other Adobe stuff is in that folder and has been for years. Never cause any problems. anyway windows will prompt if you try to save an invalid charater.
I have also got other flash files in that same folder that open fine and work no problem.
It seems to only be this PSD that is causing the problems.
I my PSD I have folders within folders, do yas think this might be the problem, I have made them all Movie Clips importing them, Im graspin at straws here i know but i cant think of anything else.
I have tried saving it as a compressd (.xfl) cs5 doc and same thing happens.
a cs4 will reopen but i loose the tfl text???

Similar Messages

Selected file failed to open as a PDF error .. on ARES 7.0

I am trying to enable some reader features using Adobe LiveCycle Reader Ex 7.0 but when I upload the pdf file i got this message
"Error 442: Selected file failed to open as a PDF 'com.adobe.document.pdf.PDFOperationFailure: IDL:com/adobe/document/pdf/PDFOperationFailure:1.0'."
when I open this fiel by Adobe Reader 8.0 I got this message
"This document contained certain rights to enable some features in Adobe Reader. This document has been changed since it was created and these rights are no longer valid. Please contact the author for the original version of this document."
is there any right should be assigned during the creation of PDF to avoid this error? i am using these products
Adobe LiveCycle Reader Ex 7.0
Adobe Acrobat 7.0
Adobe Reader 8.0
thank u;

I am trying to enable some reader features using Adobe LiveCycle Reader Ex 7.0 but when I upload the pdf file i got this message
"Error 442: Selected file failed to open as a PDF 'com.adobe.document.pdf.PDFOperationFailure: IDL:com/adobe/document/pdf/PDFOperationFailure:1.0'."
when I open this fiel by Adobe Reader 8.0 I got this message
"This document contained certain rights to enable some features in Adobe Reader. This document has been changed since it was created and these rights are no longer valid. Please contact the author for the original version of this document."
is there any right should be assigned during the creation of PDF to avoid this error? i am using these products
Adobe LiveCycle Reader Ex 7.0
Adobe Acrobat 7.0
Adobe Reader 8.0
thank u;

Flash CS5 - Failed to Open Document

Hello, I am running Flash CS5. I was saving a document and then the program crashed in the middle of saving. It now says "failed to open document". I am running a Macbook, so I can't try that little WinRAR thing I've been told to do here. Help!
I've been saving to the local hard drive. The file was created and edited exclusivey in CS5 on this machine.
Info:
Machine: 2010 Era Macbook Pro
OS: OSX Lion 10.7.5

if you have a working swf, you can try to decompile it using a swf decompiler.
sothink's is the best, imo.

My Multiple Saves On A Flash File Gone? [URGENT HELP NEEDED]

Hey guys,
I am very disappointed with the fact that I've been working on a school project on a Flash file for numerous days, and yesterday, I was close to completetion when I found out that none my saves were updated. Basically, I spent hours working on the project and I saved my Flash file multiple times; however, I just opened my Flash file today and found out that all of the updates that I had made on the file were gone. Is there any way I can still recover the file/updates through cache possible, and what may have gone wrong?
What I have Tried To Solve The Issue:
- I have done a full scan of the computer but only found the non-updated file.
- I had dragged the saved file onto my USB the previous day before I turned off the computer, but the Flash file on the USB is the non-updated file as well.
- Try to find a cache, unsuccessfully.
- Browsed this forum but found nothing.
- I even checked my Recycling Bin.
Other Info:
- I am using Flash CS3.
- The folder which contained my Flash file has all of the images that I had edited with PhotoShop CS3, as well as the images that I had downloaded online. It's only the Flash file that is old.
Please help me out on this as soon as possible as it's a school project. My hours worth of time is gone and I really don't want to have to start again while there may be a solution to this out there. Thank you very much.

You best bet is to get your san folks to give you some disk space for a mount point on the last node in the cluster. Once they assign the lun (not raw) have your SAs make it a mounted file system such as /dbbackup.
Run all of your rman backups on your last node on the cluster. The only draw back is, if that node dies, then you will not be able to run backups. but your backups would be safe as they are on the san.
Only way to have a mounted file system on all nodes in your cluser is to have some sort of third party file system cluster ware .. such as veritas or OCFS2 - then all nodes could see it.
I feel the first node in the cluster (the primary node) is the most busy out of the rest .. so thats why the suggestion of running rman on the last node in the cluster.

Trying to create flash file for site. Help!!!!

I want to export to flash in Keynote 09 so that I can put a flash file on my website. Obviously, this isn't possible now that this option was taken away. Are there any other ways I can do this? I'm basically just making a short 3 photo slideshow to put on a website home page. Please help! P.S. I don't currently have older versions of Keynote or I'd just use that.
Thanks.

If you run you .jar from the command line (a shell in unix speak) there
already is a console where your java program can send it's System.out
stuff. Right click on your .jar and select 'properties' (or similar). Note
that your .jar is run by 'javaw'. This executable is similar to the 'java'
executable except that it doesn't open a console for you. Change the
'javaw' command to 'java' and voila, there's your console again.
kind regards,
Jos

Flash CC failing when opening existing FLA

Hi,
I have several Flash Professional projects (primarily AIR Android), that fail to open in Flash Professional CC with the following error message:
     Could not load scene into memory. Your document may be damaged.
These same FLA files open fine in Flash Professional CS6, so I know that they are not damaged.
Any thoughts on how to resolve this?
Thanks!

I'm having the same problem, a little different scenario though. The FLA is originally from Flash CS6, saved as a Flash CC FLA.
After saving and reopening it defaulted to "Scene 2" and wrote to the output panel, "Could not load scene into memory. Your document may be damaged." The library was empty and nothing was on the stage. File properties (stage width/height, framerate, etc) were correct, there was just nothing in the library.
Try #1: I retrieved the original FLA from GitHub and tried it again. This time it was okay after a save and reopen.   All good. Later I saved again, closed, and reopen the next day. It was corrupted again.
Try #2: I retrieved the original FLA from GitHub and tried it again. This time I copied all the library items from the old library to a fresh, new Flash CC FLA. Saved, closed, and reopened. Corrupted file again.
Try #3: I retrieved the original FLA again. This time I copied the library items to a fresh XFL file. Saved, closed, everything okay. Later saved, closed, found the file corrupted again. Digging into the ~/Library folder of the XFL package there's nothing that seems wrong... all the XML files are there.
Try #4: Opened on a different computer. Still corrupted.
As long as I have the FLA/XFL open it won't go corrupt. Its the moment I save and close that there are problems.   I'm working on a Mac OS 10.8, I uninstalled and reinstalled both Flash CS6/CC and Flash Builder 4.7 to ensure it wasn't bad installs. Library is a mix of buttons, bitmaps, and movieClips. Flash CS6 now suffers the same fate too after the latest update.

Flash file will not open on a mac

Hi, I was wondering if anyone could help me out? I had to complete and hand in a college project on Monday. However, when I opened my Flash file on a mac, the library area containing my movieclips was greyed out and I was unable to make any selections anywhere. Within 10 seconds Flash crashed and closed down. I tried to open the file from my memory stick, a CD-ROM and from the desktop on numerous computers with no luck. What is unusual is that I am able to open and make edits to the same file on my PC. I tried opening other Flash files from my memory stick and they were fine so it seems to be an issue with the file itself. I've had no problem transferring my files between mac and PC for the duration of this project (the last two months) and cannot understand what has happened. Can anyone tell me what might be causing this problem or how I can fix it? I would really appreciate any suggestions. Thanks!

your site is doing a strict check for a certain version of
the flash plug-in, 9.0.45. It's probably not necessary to go that
far, just checking for version 9.0 should be fine. The Mac is only
up to 9.0.47 and many people are going to have a .28 version, which
gets refused by your script.

I have a file saved on my document but i when i want to open the file it says the file cannot be opened. help..!

plse help me to reopen my file in the document. all the other files can be opened except the latest one i was working with. it always say the file cant be opened. i dont know why..

Hello,
your file is probably corrupted. If you do not have a backup of this file, and if https://discussions.apple.com/message/16132821#16132821 does not help ; you can send your file to me, I will try to see if there is a chance to open it or if it is definitively lost...

Just turned on my MacBook and it has a flashing file symbol...Help?

Switched on the MacBook and it has a flashing file symbol with a Question mark. What does this mean the user manual was rubbish...

Welcome to Apple Support Communities
It means that the MacBook couldn't detect any bootable partition to start from. It usually means that the hard disk is damaged, but it could also mean that your computer has forgotten the startup disk.
First, turn off your MacBook and turn it on holding the Option (Alt) key, so you will see all bootable partitions in the display. If you can see the OS X partition, select it, and after starting, open System Preferences > Startup Disk, and select the OS X partition.
If it doesn't work, it probably means that the hard drive is damaged, but we should check it. To do it, hold Command and R keys while your computer is starting to start in Recovery HD and open Disk Utility. Then, choose "Macintosh HD" in the sidebar and repair the drive. If it couldn't be repaired, you need a new hard disk

Bought ebook from simon schuster, downloaded Adobe Digital 3.0, everytime I try to open ebook Adobe reader pops up and say file cannot be opened HELP!!!!!!!!!

I bought an ebook from simon and schuster, it told me I had to download the book to Adobe Digital 3.0. I downloaded Adobe Digital 3.0 but every time I try to get the book, Adobe reader pops up and says file cannot be opened. Simon and Schuster has been no help at all, just keep sending the same download instructions@

I have had the same problem. Adobe doesn't have an answer. I highly recommend dumping Nook and going to Kindle.

I upgraded to yosemite 10.10.3 and my fcp x 10.2 fails to open help!!

i recently upgraded to yosemite 10.10.3 and the fcp x 10.2 fails to open
looking for a solution
Moshe

Try creating a new user and see if the application runs in that user account.
If it works, then it is something in your user account (preferences, caches, login items) that is causing a conflict.
It it dies not, then you should remove the application using FCS Remover, and download a fresh copy from your purchases in the App Store.

Captivate Files containing flash files fail to play in AIR

Hello,
     I am using RoboHelp 8, and Captivate 4. And I am running Windows Vista Ultimate.
     I am trying to make a fairly complex training system/operator's manual. We would like the final output to have the uniformity, searchability and structure provided by AIR. Our method of design involves making interactive swf files in captivate. Not only do these files have interactive buttons, and pop up windows, they also have silent looping animations and larger flash video sequences that feature full motion and sound. After the interactive, video-rich document is created in Captivate, it is saved and it's swf is imported onto a page in Robohelp HTML. And finally the project is exported through Adobe AIR.
     Here's the problem: The final air output shows the swf file correctly with the exception of all video. All of the video files are absent from the final AIR output.
     Is this a simple issue of redirecting AIR to look for the files at the correct location? With captivate, it generated a folder that it populated with all the contained .flv animations. When I click on the .swf that was generated with those files, the Captivate document plays properly and complete with all video and navigation.
     Any Ideas on how to fix this?

Hello,
     I am still struggling with trying to get the videos to play in a swf file after it is exported to Air. I've tried a few more tests to get to the bottom of this, unfortunately I don't know how to evaluate the results. Here are some things I've noticed.
     Within robohelp, If I click the "View selected Item" button while on the topic containing the swf, the preview pops up and plays all of the embedded videos properly. However, after closing the preview I get an chain of Internet Explorer Script Errors. It reads:
"An error has occured in the script on this page
Line:53
Char:3
Error:Object required
Code:0
URL: file:///C:/Users/dp/Documents/My%20RoboHelp%20Projects/quadrispaceTest/BaggageFolder/PK10 1_2.htm
Do you want to continue running scripts on this page?"
When using the output modules, the AIR module creates an Air document, but when the SWF is clicked through, the pages with embedded video appear to be missing from the file.
     The WebHelp Pro and FlashHelp Pro Modules both output properly. The videos inside the SWF play completely and properly.
     The Microsoft HTM: help output, acts similarly to the Air output. It generates the help project, but when the topic with the SWF is viewed, the videos laced throughout the SWF fail to appear.
     I hope this provides some more insight into my problem, since I am anxious to get beyond this issue.
-David

Flash file won't open

I saved and compacted my .fla the other day and the wheel
never stopped spinning. I force quit/restarted and still, it loads
up and never gives me any kind of window describing any problem --
but I never see an image and the wheel just keeps spinning and
spinning.
The document is 45 mb and about 3000 frames long. I have no
.swf to use for recovering the file. I'm on a Mac.
Please help! Does anyone have some suggestions on recovering
the file???
Thanks!
Bezer

Hi,
I'll look into this issue here . If possible please email your fla to us at [email protected]?
Please note that our filter system cannot accept .zip file.
If you are sending the file in .zip format change the file extension from .zip to .zzz.
Thanks
Sukhbir
Flash Authoring

Unix executable file won't open HELP!

I am having the same problem as one other person, my word folder has changed to a Unix executable file and I can't open the content in the folders anymore. I was just using the folder yesterday and now they are now working. Please help!

I'm not sure if this is your problem. But I was futzing with a file, and intentionally removed most of it's attributes, as reported by the mdls command.
I was able to get enough of them back, for the file to be recognized by the finder again.
This command lists the different importers.
$ mdimport -L
find the one that matches the filetype. Then run the following, where testfile is the file that you're having problems with.
mdimport -g /System/Library/Spotlight/XXXXXX.mdimporter testfile
I don't use Word, so I can't tell you the name of the importer file that you need. It may be possible to just
run
mdimport testfile
Nils

Files will not open HELP , I posted this 4 days ago and no replies

Hi so my adobe illustrator just updated to CC 18.1 and i went to open a file that I created 2 months ago and i get a pop up window that says illustration can not be opened. this in a new place of employment for me so i have been trying to figure out how the prior person had thing configured ect . Also this is my first time with the CC( use to use CS6) but there are 2 versions of illustrator on the Mac book pro and if i use the older version which is still cc the file opens . Can anyone please shed some light on this for me
Thanks

macbook Pro
OS X Yosemite
files are saved on my desktop and also on a external back up drive .
printer is working fine .. all my ai files open as long as i open with Adobe illustrator C (17.1) and not the newest update see screen shot below

Flash Files failed to open - HELP!!

Similar Messages

Maybe you are looking for