Flash files not recognized

My bank sets flash files in a Macromedia folder under ~\library\preferences.  The flash file is used by the bak server to recognize the Mac (and avoid security questions) if the cookies are purged.  I cna see the flash file right where it is supoosed to be.  The time stmap indicates it was set at the most recent visit.  Somehow the bank server doesn't see that flash file, so I have to answer teh security questions upon the next logiin.  The bank IT department tells me the flash file is set by the browser (Safari).  They can't reproduce the problem on their one Mac, and are blaming some unknown setting or feature of my browser.
Could it be a Safari setting?

Did you do this?
"A solution found!!!!!!!!!
**I downloaded a Sony plugin from Sony's website that allows you to log and transfer the material shot on a Compact Flash card (with a camera like the Sony Z7U) and bring that into FCP. They have the plugin for both FCP 6 and FCP 7. After installing the plugin, I was successfully able to bring in my footage. Interstingly though, I tried to bring in another folder of video I transferred to my hard drive that was shot on the CF cards and FCP gave me the message saying the media was unsupported and/or something was wrong with the file directory. I took a look at the folders where I have my video stored and noticed that the folder entitled "VIDEO" had a sub folder entitled "HVR" then within that folder were the files. One of my folders did not have the "VIDEO" folder. So I created one and dragged and dropped the other files into that"VIDEO" folder and like a charm it worked!
**So very important: For those of you using a CF based file system, make sure you download this following plugin from Sony's website: http://www.pro.sony.eu
*Also make sure that you have the outer folder named "VIDEO" all in capital letters. I guess it's the same concept as a DVD player not playing a video that doesn't have both the "Audio TS" and "Video TS files" even though the AUdio TS folder is blank.
Hope this helps out some of you folks who may have experienced the same quirk I did when trying to transfer the CF card video into the log and transfer of FCP.
Thanks,
Scott Wolfson"

Similar Messages

  • Install error during make of Pro*/C++ - file not recognized:

    Say, anyone seen this error during install? The file or directory "proc" is indeed missing... is this a known shortcoming of this release? Can these make errors be ignored?
    Thanks in advance
    Dennis
    Starting install Link Phase of component Oracle Internet Directory Client Common Files
    Starting install Link Phase of component Required Support Files
    Starting install Link Phase of component Oracle Code Editor
    Starting install Link Phase of component Oracle Database User Interface
    Starting install Link Phase of component Oracle Ultra Search Server Rdbms
    Starting install Link Phase of component Enterprise Manager Minimal Integration
    Starting install Link Phase of component Object Type Translator
    Starting install Link Phase of component Pro*C/C++
    Calling Action unixActions10.1.0.3.0 make
         installMakePath = /usr/bin/make
         installMakeFileName = /app/oracle/OraHome_1/precomp/lib/ins_precomp.mk
         installTarget = relink
         installArguments = ORACLE_HOME=/app/oracle/OraHome_1,EXENAME=proc,
         undoMakeFileName = null
         undoTarget = null
         undoArguments = null
         logFile = /app/oracle/OraHome_1/install/make.log
         progMsg = Linking proc
    The output of this make operation is also available at: '/app/oracle/OraHome_1/install/make.log'
    Start output from spawned process:
    Linking /app/oracle/OraHome_1/precomp/lib/proc
    /app/oracle/OraHome_1/lib/s0main.o: file not recognized: File format not recognized
    collect2: ld returned 1 exit status
    /bin/chmod: failed to get attributes of `/app/oracle/OraHome_1/precomp/lib/proc': No such file or directory
    make: *** [app/oracle/OraHome_1/precomp/lib/proc] Error 1
    End output from spawned process.
    Exception thrown from action: make
    Exception Name: MakefileException
    Exception String: Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
    Exception Severity: 1
    *** Cancel Dialog: ***
    User Selected: Stop installation of all products.
    Exception handling set to prompt user with options to Retry Ignore
    User Choice: User selected to stop installation of all components.
    Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
    Unable to read the list of homes from the inventory.

    If your library is in the standard layout of an iTunes folder containing an iTunes Media folder (and you've already copied over the media) then you can simply copy the iTunes library files and album artwork folder across to the new machine recreating the same layout. If the media folder has been split out from the main iTunes folder then see make a split library portable for a way to get the library into a portable form, after which you can copy over the library files.
    tt2

  • New Nikon Df camera RAW files not recognized in Bridge and Photoshop.

    New Nikon Df camera RAW files not recognized in Bridge and Photoshop.  Is there a fix?  Surely Adobe make a mistake and not keep up with Nikon.

    I looked at the current list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html and did not see the Nikon DF listed.
    Would post in ACR forum and see if they know anything more.  http://forums.adobe.com/community/cameraraw

  • Flash files not displaying in Firefox, Safari, and Opera. Most recent Shockwave installed, private b

    Flash files not displaying in Firefox, Safari, and Opera. Most recent Shockwave installed, private browsing active in Firefox?  Works perfectly in Chrome and Internet Explorer.  HELP!!!!

    I suppose it would have helped if you knew what it was supposed to look like!   I'm using Shockwave Flash 11.7.700.169  and the version of Firefox I'm on is 20.0
    When you see it in Firefox  - do the thumbnail populate the grid?  See attached populated and un-populated.
    Populated grid is with Chrome.
    Thanks!
    Thanks in advance!

  • Libc.so: file not recognized: File format not recognized

    Hi,
    While running the "cd $ORACLE_HOME/procbuilder60/lib; make -f ins_procbuilder.mk install"
    i am getting the error.
    [appldev@datadev lib]$ cd $ORACLE_HOME/procbuilder60/lib; make -f ins_procbuilder.mk install
    rm -f de60desm /appldev/devora/iAS/6iserver/bin/de60desm
    - Linking de60desm executable...
    gcc -o de60desm -L/appldev/devora/iAS/6iserver/lib/ -L/appldev/devora/iAS/6iserver/lib/ -L/appldev/devora/iAS/6iserver/lib//stubs/ \
    /appldev/devora/iAS/6iserver/procbuilder60/lib/detk2.o /appldev/devora/iAS/6iserver/procbuilder60/lib/demsr.o /appldev/devora/iAS/6iserver/procbuilder60/lib/demcl.o \
    /appldev/devora/iAS/6iserver/procbuilder60/lib/ui10.o /appldev/devora/iAS/6iserver/procbuilder60/lib/uiicxd.o \
    /appldev/devora/iAS/6iserver/rdbms/lib/defopt.o -lde60 \
    -lca60 -lucol60 \
    -lnvu60 -lnvc60 -lnvs60 -luicc60 -lmmiw60 -lmmov60 -lmma60 -lmmos60 -lmmoi60 -lmmia60 -lmmft60 -lmmcm60 -luihx60 -luihx60 -luc60 -luipr60 -luimotif60 -lot60 -lrem60 -lree60 -lrec60 -luiimg60 -luimotif60 -luipr60 -luiimg60 -luc60 -lrem60 -luimotif60 -luia60 -ltknqap60 -luipr60 -luimotif60 -lutt60 -lix60 -lixd60 -lrod60 -lror60 -lros60 -lrod60 -lror60 -lros60 -lrod60 \
    -luat60 -lutc60 -lutl60 -lutsl60 -lplsf -lplsb -lextp /appldev/devora/iAS/6iserver/lib/libpsd.a -lplsf -lplsb -lextp \
    -lslax /appldev/devora/iAS/6iserver/lib/nautab.o /appldev/devora/iAS/6iserver/lib/naeet.o /appldev/devora/iAS/6iserver/lib/naect.o /appldev/devora/iAS/6iserver/lib/naedhs.o `cat /appldev/devora/iAS/6iserver/lib/naldflgs` -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /appldev/devora/iAS/6iserver/lib/sysliblist` -ldl -lpthread -lm -L/usr/lib -lm -L/usr/X11R6/lib -lXm -L/usr/X11R6/lib/ -L/usr/X11R6/lib/ -lXt -lX11 -lm -lix60 -lixd60 -lX11 -lnlsrtl3 -lXp -lXext
    /appldev/devora/iAS/6iserver/lib//stubs//libc.so: file not recognized: File format not recognized
    collect2: ld returned 1 exit status
    make: *** [de60desm] Error 1
    My OS version is RHEL 5.
    Please suggest.
    Thanks in advance.

    But We are facing another issue while running "cd $ORACLE_HOME/reports60/lib; make -f ins_reports60w.mk install"
    [appldev@datadev lib]$ export LD_LIBRARY_PATH=/appldev/devora/8.0.6/network/jre11/lib/i686/native_threads/
    [appldev@datadev lib]$ cd $ORACLE_HOME/reports60/lib; make -f ins_reports60w.mk install
    Last few lines Error:
    ld -shared -o rwows60.so -z text -G -export-dynamic -L/appldev/devora/8.0.6/lib/ -L/appldev/devora/8.0.6/network/jre11/lib/linux/native_threads -L/appldev/devora/8.0.6/network/jre11/lib/i686/native_threads /appldev/devora/8.0.6/reports60/lib/rxmawt.o /appldev/devora/8.0.6/reports60/lib/rwsows3.o /appldev/devora/8.0.6/reports60/lib/rwswif.o /appldev/devora/8.0.6/reports60/lib/rwswcj.o /appldev/devora/8.0.6/reports60/lib/rwswcs.o /appldev/devora/8.0.6/reports60/lib/rwswm.o /appldev/devora/8.0.6/reports60/lib/rwsws.o /appldev/devora/8.0.6/reports60/lib/rwswcm.o /appldev/devora/8.0.6/reports60/lib/rwswk.o /appldev/devora/8.0.6/reports60/lib/rwswu.o /appldev/devora/8.0.6/reports60/lib/rwswur.o /appldev/devora/8.0.6/reports60/lib/rwswx.o -lzrc60 -lca60 /appldev/devora/8.0.6/lib/nautab.o /appldev/devora/8.0.6/lib/naeet.o /appldev/devora/8.0.6/lib/naect.o /appldev/devora/8.0.6/lib/naedhs.o -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lncr -lnetv2 -lnttcp -lnetwork_d -lnz -lnzr -lnsslb8 -lbcert -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -ldl -lm -lpthread -ldl -lpthread -lm -L/usr/lib -lm -lc
    /usr/lib/libc.so: file not recognized: File format not recognized
    make: *** [rwows60.so] Error 1
    Kindly suggest..What is the document/step you are following?
    Thanks,
    Hussein

  • Flash file not responding if more than 1 flash file.

    product : Adobe Flex Builder ver 2.. HELP required urgently..
    I'm very new to Flex. in my adobe FLEX page, i'm displaying 2
    flash file (.swf). the flash file itself pop-up data based on click
    on the adobe flash file. however only 1 flash file (first flash
    file) responsds and 2nd flash file loaded but NOT responding to
    click and no data pop-up in the 2nd flash file.
    However, if i change the order of FlashLoader2.load("file"),
    the 2nd flash file responding and the 1st flash file not
    responding. so, we can conclude that flash file is ok. anything
    need to change in adoble flex???? pls help.
    thanks

    ar tech,
    I think that your problem is to do with layering. You have
    specified both loaders to have width and height 100% so (unless
    there is more to your code than you have posted) they will sit on
    top of each other. In that case unless you have done some clever
    code to pass on the mouse request, it will get swallowed by
    whichever one is on top (hence the change of behaviour when you
    alter the order of loading).
    It sounds from your description as though they actually sit
    in different screen areas, so maybe try changing the location
    parameters and see if both respond when you put them side by side.
    Richard

  • Camera RAW, file not recognized after import and migration, Aperture 2.1

    Hi,
    I have recently purchased a 1DMKIII and am constantly getting "file not recognized" after I import and even after migrating RAW files. My 1DS MK1 RAW files have no issues. The RAW files render just fine using CS4 bridge. Any ideas here on a fix? Other than ditching Aperture (not desireable)
    Thanks,
    Greg

    Hummmm..I have just 'manned-up' from a 2gb macbook running tiger+CS4 to a iMac 24" 8gb running leopard BUT!
    I shoot RAW and the iMac will not recognize the NEF RAW files! this is soo frustrating - tried to update Camera Raw but to no avail.
    please help! I've got 987 raw wedding photos to process!!
    I dont know what to do!

  • .RAF files not recognized in bridge but PS ok.  Patch 7.1 installed.

    .RAF files not recognized in bridge but PS ok.  Patch 7.1 installed.  Anyone know the fix?

    To me it seems related to your Adobe Camera Raw (ACR) converter. Clue inhere is you only miss the Raw files and have no problems in seeing other formats like jpeg and tiff.
    The screenshot you delivered is from the wrong library, however, this same library (the one on system level) also is the location where you should be able to view the correct version of your ACR plugin. The path: library (same as per your screenshot)/Application support/ Adobe/ Plug ins/ CS6/ File Formats. inhere should be only one version of Camera Raw (called: "Camera Raw.plugin") and this should show version 8.3 (141).
    I'm not sure about your bridge version number, Bridge 5 comes with PSCS6 but my most recent version of Bridge is 5.0.2.4.
    Anyway, if you have only one ACR (8.3) installed in the above mentioned path then you might want to try to delete the Bridge plist file and Bridge cache file manually.
    For this you have to Quit Bridge and find the user library (by default hidden, use menu Go in Finder and press option key to reveal).
    Inhere find the plist file (user(your user name) / library / Preferences  and inhere find and manually delete the file called: "com.adobe.bridge5.plist"
    The in same user library find Bridge Cache. User/Library/Caches/Adobe/Bridge CS6. Inhere are 2 files, the adobe Bridge plug in cache and the folder called Cache. delete (or move outside libray) both items.
    The restart Bridge (If needed also again hold option key to reset preferences) and this will create fresh files for the previous deleted items, leaving you with an almost out of the box factory set version of Bridge.

  • Flash 8 not recognizing fonts

    I'm experiencing difficulties with Flash 8 not recognizing
    the majority of a font family.
    Its strange because Photoshop & Illustrator recognize
    them & display them just fine.
    The fonts involved my project include:
    Helvetica
    Helvetica Compressed
    Helvetica Condensed
    Helvetica Black
    Helvetica Light
    Helvetica Extra Compressed
    Helvetica LT Std
    Helvetica Neue
    Helvetica Ultra Compressed
    Of this list, Flash 8 is only recognizing:
    Helvetica
    Helvetica LT Std
    Helvetica Neue
    So at this point I'm having to literally type EVERYTHING out
    in Illustrator, export swfs, and import them into Flash.
    This is obviously time consuming and makes simple text
    changes a pain.
    I'm leaning towards the fact that this is a corrupt font
    issue, yet these fonts are available in every other software I've
    tried them in.
    Has anyone else experienced this issue?
    Any thoughts??
    Thank you!!!
    -eric

    I was having the same problem, with other fonts. I tried what brianimator suggested and it made it worse. Half of my fonts are now again gone. I can't take this anymore... worse of all, verdana is still MIA.
    Those fonts are all in system/library/fonts, they just don't work with Flash and only Flash. I'm ready to shoot myself soon. I don't know what else to try. Any ideas, anyone?
    PS: I have an iMAC OSX 10.5.7 and I run Adobe CS4 (fonts are recognized in all other applications)
    N.

  • Mp3-file not recognized on my Samsung SGH-E720 mobile phone

    hey,
    i recently ripped my audiocd's in iTunes. some files can't be played back on my mobile phone: it says "file not recognized". others can be played. what am i doing wrong, or is it just the type of audiocd i ripped?
    grtz
    imac g5 17"   Mac OS X (10.4.8)   broken for the moment ...

    hey,
    i recently ripped my audiocd's in iTunes. some files can't be played back on my mobile phone: it says "file not recognized". others can be played. what am i doing wrong, or is it just the type of audiocd i ripped?
    grtz
    imac g5 17"   Mac OS X (10.4.8)   broken for the moment ...

  • Flash Drive Not Recognized

    I have an 8GB flash drive that worked until last night. I was uploading a 3.6 GB file and it crashed. I tried using Disk Utility to reformat the drive, but then that crashed too, along with Finder. I had to hold the power button to shut down my computer.
    Now my flash drive isn't recognized by my Mac and does not come up with Disk Utility. I tried using it on a PC and the PC realized it was inserted but it was not recognized.
    HELP!

    wizcreations wrote:
    It's not the power in the ports because other USB devices still work without a problem.
    Missed the part where you told us that. 8^)
    Then format it on the PC and bring it back to the Mac.
    Joe

  • Flash player not recognized nor will Java.

    I've gone thru the download process 3 times now, but Flash is not being recognized. Works fine thru IE 7. And on my Ameritrade account, streamer will not launch as the java program locks up. IE 7 is still my default until Safari gets this fixed and out of Beta.

    The "plugin" for Java that is on the Safari plugins page is not a plugin at all, it's just a link to the Sun site to download the latest JRE (1.6u1). There does appear to be a Java plugin for Safari that is shipped in the install and is the two files JavaPlugin.jar and npJavaPlugin.dll in the directory C:\Program Files\Safari\Plugins.
    This plugin appears however to do nothing. No Java sites work with Safari.
    Michael.

  • Flash file not opening in XP system

    hi...
          I did one flash file by using Action Script 3.0. That SWF running in Vista and Windows7 systems but it not running in XP systems.
         What the Resion for that..

    no.. is there...
             Other SWF files are Running...

  • Flash File not Able to Display using ADF Trinidad components..

    Hi All,
    I am trying to display a flash file using ADF trinidad component for one our project but not able to display when embeded inside the code.
    However I am able to directly access the flash file using http://localhost:7101/test/pages/test.swf
    The below Object code is included inside the tr:panelHorizontalLayout tag. I also tried using tr:media but doesnt display anything on the browser.
    <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="210" height="230" id="footer_ad1" align="bottom">
    <param name="allowScriptAccess" value="sameDomain"/>
    <param name="allowFullScreen" value="false"/>
    <param name="movie" value="http://localhost:7101/test/pages/test.swf"/>
    <param name="quality" value="high"/>
    <param name="bgcolor" value="#ffffff"/>
    <embed src="http://localhost:7101/test/pages/test.swf" quality="high" bgcolor="#ffffff" width="210" height="230" name="test" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave- flash" pluginspage="http://www.adobe.com/go/getflashplayer"/>
    </object>-->
    Thanks
    Chetan

    Hi Ramandeep,
    I tried that option early but did not work. Not able to understand why.
    Below is the code snippet.
    <tr:panelGroupLayout layout="vertical">
    <tr:panelHorizontalLayout>
    <!--Some Portlets are added-->
    <f:verbatim>
    <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="210" height="230" id="footer_ad1" align="bottom">
    <param name="allowScriptAccess" value="sameDomain"/>
    <param name="allowFullScreen" value="false"/>
    <param name="movie" value="http://localhost:7101/test/pages/test.swf"/>
    <param name="quality" value="high"/>
    <param name="bgcolor" value="#ffffff"/>
    <embed src="http://localhost:7101/test/pages/test.swf" quality="high" bgcolor="#ffffff" width="210" height="230" name="test" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave- flash" pluginspage="http://www.adobe.com/go/getflashplayer"/>
    </object>
    </f:verbatim>
    </tr:panelHorizontalLayout>
    </tr:panelGroupLayout>
    And as I mentioned it works fine when I directly access the flash file by using http://localhost:7101/test/pages/test.swf.
    Thanks
    Chetan

  • USB flash drive not recognized by computer. Have tried all options of which I can think.

    Okay.  I have a Patriot S-Mini 32GB flash drive that my Windows 8.1 HP Slimline 400-434 is not recognizing. I believe it recognized it once, and has refused to do so since. My laptop (Windows 7 Toshiba) recognizes it just fine. 
    All other USB devices function perfectly on this computer. USB mouse/keyboard/USB Hub/Apple iPhone cable.
    1. I have tried unplugging all other USB devices before trying this one. FAIL
    2. I have gone to Device Management and the USB drive does not appear in the list. FAIL
    3. I have uninstalled the USB Root Hubs and restarted the computer. FAIL
    4. I have tried plugging the USB drive into the rear ports that plug directly into the motherboard. FAIL
    5. I have updated the drivers, and have been unable to find a BIOS update as the link on the HP website downloads and says that it is incompatible for my computer. FAIL
    ...so what the bloody gorram heck do I do now? 
    This question was solved.
    View Solution.

    Okay, and in the most ridiculous way I have ever solved a technical problem...
    The USB flash cannot be inserted ALL the way into the port. It has to be inserted slowly, so that the contacts line up. 
    I figured this out by trying to connect it into my USB hub and noticing that the red indicator light was going on and off as I inserted the USB drive, flickering on as I inserted it and then off once it was all the way in. 
    Weird. But hey. It works now. 

Maybe you are looking for