Flash files with audio sound garbled or high pitched

I have finally clarified the sound problem I reported in this
forum.
See below.
TechSmith
Camtasia Studio Support
Flash files with audio sound garbled or high pitched
Question
Flash files played in the the newest version of the Flash
Player sound garbled or have a high-pitched "chipmunk" sound to
them.
Answer
http://techsmith.custhelp.com/cgi-bin/techsmith.cfg/php/enduser/std_adp.php?p_faqid=1250&p _created=1197056770&p_sid=BZo7CNSi&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmc F9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MTImcF9wcm9kcz0wJnBfY2F0cz0mcF9wdj0mcF9jdj0mcF9 zZWFyY2hfdHlwZT1hbnN3ZXJzLnNlYXJjaF9ubCZwX3BhZ2U9MSZwX3NlYXJjaF90ZXh0PUZsYXNoIFBsYXllcg**& p_li=&p_topview=1
Flash files with audio sound garbled or high pitched
Question
Flash files played in the the newest version of the Flash
Player sound garbled or have a high-pitched "chipmunk" sound to
them.
Answer
The latest release of the Flash Player (v9.0.115.0 released
on 12/03/07)) causes audio to sound garbled and/or high pitched
like a chipmunk. Our development team is looking into this issue
and working to find a fix.
To avoid this problem, you can roll back your Flash Player to
a previous release. If you have problems installing an older
release of the Flash Player please review this article and contact
Adobe for further support.
At this time, the problem is limited only to SWF files
produced with the MP3 audio codec. As a workaround, you can produce
your SWF files with the PCM audio codec or use the FLV format
instead of SWF.
Adobe Flash Player Support
Reinstalling an earlier version of Adobe Flash Player
Contact Adobe:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402435&sliceId=1
Safe versions security restrictions when installing Flash
Player
Issue
If you previously installed a later version of Flash Player
for Internet Explorer, you may be prevented from installing an
earlier version. For example, if you installed Flash Player
9.0.47.0 and attempted to install version 9.0.45.0 the installation
would fail.
Reason
This issue is due to registry key settings applied by the
Flash Player security model. The restriction is to prevent users
from downgrading Flash Player minor versions. The minor version of
Flash Player is the third set of numbers in the version name. For
example, the minor version for Flash Player 9.0.47.0 would be 47.
If Flash Player 9.0.47.0 was installed and you attempted to install
9.0.45.0 (minor version 45), the installation would fail.
Solution
To resolve this, download the uninstaller for Flash Player
from "How to uninstall the Adobe Flash Player plug-in and ActiveX
control" (TechNote tn_14157).
Select Start.
Select Run.
Type cmd
In the command window, type the following:
uninstall_flash_player.exe /clean
This will remove all entries in the system registry and
resolve this issue.
Note: The uninstall_flash_player.exe file must be saved to
the same directory that the command window is in, for example C:\.
Additional Information
If you are still having trouble installing Flash Player,
please see "Troubleshooting Adobe Flash Player installation for
Windows" (TechNote tn_19166).
TechNote Details
Last Update: 08-16-2007
ID: kb402435
OS: Windows Vista
Windows XP
Browser: Internet Explorer
Permanent Link:
http://www.adobe.com/go/kb402435
Products Affected: Flash Player

Hi,
I doubt it's Safari that's changing the settings:
Why does this happen?
Some third-party audio applications may change your computer's audio output setting. In fact, if you use the third-party application again after applying the above solution, the issue might occur again.
No sound from some applications, but system alert sounds play (Mac OS X 10.3, 10.4)
iMac G5 20" 2GB RAM, Soundsticks, Netgear 814 ---> Mac OS X (10.4.3)

Similar Messages

Importing flash files (with sound!) can it be done?

Hi!
I sucessfully importing a flash file but im not sure if the sound has imported with it, does anyone know if I can import a flash file with sounds or do I have to import the sound seperatly?
Helen

Helen,
After Effects can import .SWF files but unfortunately it does not recognize the audio in a .SWF file.
If it helps, AE can import .FLV files and it WILL recognize the audio in them.
Relevant Help page:
"Supported import formats"
-Troy

Flash files with right click imported in dreamweaver files

Flash files created with Captivate which contain rightclick
functionality are imported to html files created in Dreamweaver. In
other words, I don't use the html created by Captivate but another
html file to build up a whole course. But now a couple of those
flash files contain a right click and obviously I have to adjust
the dreamweaver file with some of the script that William Heinz has
created. I am not an HTML expert and I am not 100% confident that I
can do with just endless try&error. Could anyone give me some
hints?
I suppose I need to use the second bit of William's article
"the more complex requirement".
When I insert the flash file this is what I get: (This is
where I am suppose to make the changes????)
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0','widt h','746','height','591','title','Schedule
Let
Me','vspace','5','src','Resources/Sched_LM_skin','quality','high','pluginspage','
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movi e','Resources/Sched_LM_skin'
); //end AC code
</script><noscript><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0"
width="746" height="591" vspace="5" title="Schedule Let Me">
<param name="movie" value="Resources/Sched_LM_skin.swf"
/>
<param name="quality" value="high" />
<embed src="Resources/Sched_LM_skin.swf" width="746"
height="591" vspace="5" quality="high" pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash"></embed>
</object></noscript>
I am not sure what to do with the "<Body
onload='javascript:init()..... "etc as suggested by William.
Thanks for any advice on this!!!

I hope there is one person out there who can help me with
this issue.
I have started from scratch and created a blank html with
dreamweaver and inserted the flash file (with right click
animation) created with Captivate.
Then I made the adjustments as per Heinz and also included a
ID=Captivate1 as the RightClick.js refers to that.
The main difference between this html file and the html file
created with Captivate, is that the Captivate one also has
writedocument bit.
Anyway, is there anybody in the world who can give me
atip/hint/suggestion?????

Can CDHtmlDialog play swf file with audio component?

Hello, I'm using CDHtmlDialog in our application to play swf that shows user how to do a workflow. It works fine if swf does NOT have audio; if the swf has audio component, then it does not play.
Can CDHtmlDialog play swf with audio?
If not, any suggestion on how to implement playing swf file with audio?
Many thanks in davance.

Hi PingHu,
How do you play the swf file in a html. I tried play a swf file with audio in my CDHtmlDialog class. I just use this:
Html code Play the SWF file.
<!DOCTYPE html>
<html>
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<body>
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="200" height="100">
<param name="movie" value="filename.swf">
<param name="wmode" value="transparent">
<embed src="D:\html directory\swf filename.swf" width="400" height="500" type="application/x-shockwave-flash" />
</object>
</body>
</html>
Then my sample is able to play a SWF file with audio. Hope this helps some.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I get rid of the flashing file with a question mark in it?

I wanted to start clean on my MacBook Pro osx 10.9.4. So I did the command r and erased what I thought was the right one. I restarted my computer and did the command r again and what came up was internet recovery. It can't find my internet because it's WEP and I don't know to change it to wpa. So I restarted my computer again and I didn't do the command r but just let it load itself to see what would happen and all I get is a flashing file with a question mark. I don't know what to do. Someone please help me.

Do you get this display?
If so, you have to select an Internet connection. Do not expect quick response time in this mode. All activities in this mode will be lengthy.
Ciao.

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. Does any one know how I can get it to recover?

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? Thanks

I just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me..

How to insert a shoutbox and a counter in a flash file with html code?

How to insert a shoutbox and a counter in a flash file with
html code?
Code shout box

<iframe src="
http://489676.myshoutbox.com/"
width="152" height="300" frameborder="0"
allowTransparency="true"></iframe>

Code compteur
<script type="text/javascript" src="
http://www.123compteur.com/counterskinable01.php?votre_id=268303"></script><noscript><a
href="
http://www.123compteur.com"
target="_blank">compteur</a></noscript>

thx =D

I've got a 15" white macbook which I bought about 2 years ago. It froze the other day and wouldn't respond so I shut it down. When I turn it on now it comes up with a flashing file with a question mark on it. How can I fix it?

I've got a 15" white macbook which I bought about 2 years ago. It froze the other day and wouldn't respond so I shut it down. When I turn it on now it comes up with a flashing file with a question mark on it. How can I fix it? I've tried a few things i've seen online but the futhest ive got is to put the start up disk in when you makes it go to a grey screen with an apple logo and the spinning wheel which then stops spinning. Can anybody help?

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once.It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left handlist. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Play DVD with audio sound via Airport Express speakers

Is it possible to play my DVD with audio sound via my Airport Express speakers?
I can play music with iTunes trough these speakers, it would be nice if I can hear my DVDs aswell.
iMac intel core duo Mac OS X (10.4.7)

Not using Front Row.
The real issue here is that audio and video stream at different speeds and it is hard to maintain sync. You know how when you hit play within iTunes it takes a while for the song to start through the speakers? It's the same with the DVD. So you'd need to work an offset into the audio when playing a DVD and it's not an exact science.
You can download VLC player and mess around with the offset, then you'll also need a program like Airfoil to be able to force audio through the airport express.
Good luck!

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams

How do I save stock footage as flash file with transparent background?

Hi
I have some stock footage of smoke on a black background (.mov format) that I would like to convert to a flash file with a transparent background, which I will be overlaying over a PNG image on a webpage.
I have managed to remove the black background in After Effects using a plugin called UnMult, but when I try to render as a FLV file in AE, even though I check the option to preserve the alpha channel and encode using the On2 VP6 codec, I still get a black background.
So I am wondering what else to try, whether it be with AE or Flash CS4. Is there a way of achieving this effect by directly importing the MOV file into Flash CS4 and removing the black background there, or do I have to use AE, and if so, how to achieve the effect I am looking for?
I would be grateful for any help in getting this together
Thanks
Nick

You can put the video file in a movie clip and change it's
blending in the properties panel to multiply or screen.
Emil Georgiev - Flash and Web Design

Mts files cannot imported with audio in pro cc6. how i can import mts files with audio?

when i am importing mts files in pro cc6. every time it is being imported without audio. though original mts files have audio. how can i import mts files with audio in cc6?

To clarify Media Browser suggestion - very important that you copy ALL content from SD card to hard drive before importing using Media Browser. If you only have the .mts files alone, there is stuff missing that is needed for Premiere to properly interpret the video/audio.
Thanks
Jeff Pulera
Safe Harbor Computers

Importing P2 .mxf files with audio into AE CS4

I hope this isn't the ultimate newbie question but, I have been working with After Effects for a few months but haven't need audio until now. Is there a different process for importing/exporting with audio? I have brought in the P2 video file but I don't think there is audio attached to it. When I export to a QT file, there is definitely no sound? Am I doing something wrong?
Thanks in advance for any help.
Kevin

"FAQ: Why is there no sound (audio) in my output file?"
"FAQ: How can I play or preview sound (audio)?"
To make sure that you're importing the P2 audio essence files, follow the instructions here: "Import assets in Panasonic P2 format"

Flash file with trancparency as dashboard widget

trancparency only works for pictures on lower layers but not for the
desktop background
the picture "Default.png" behind the flash file is partial visible
but the widget has a 200 x 200 pixel black background,
areas without pictures on lower layers are black
<embed src="a.swf" quality="high" width="200" height="200"
align="right" wmode="transparent"
type="application/x-shockwave-flash"
pluginspage="http://www.macromedia.com/go/getflashplayer" />
#image { position:absolute; top:0px; left:0px; width:200px;
height:200px; z-index:1; }
#flash { position:absolute; top:0px; left:0px; width:200px;
height:200px; z-index:2; }

I would guess that Flash is not respecting the alpha layer in your background. Flash does its own rendering, so it's the likely culprit.
However, you may want to double check with other Dashboard developers. The best places to ask are Apple's own Dashboard listserv (dashboard-dev at lists.apple.com) and the forums at dashboardwidgets.com.
Good luck!

AE CS3: Crashes on export to Adobe Flash Video (with audio)

I have a 10 second comp I'm rendering to Adobe Flash Video. The comp has a wav file on it.
I have ram previewed the comp and it plays back just fine.
When I render it to Adobe Flash Video via the render queue my comp crashes at 30 frames in everytime.
However if I remove the wave file from my comp, AE will fully render the comp to an FLV file.
I have also tried replacing the wav file with another random wav file - I get the same crash everytime at 30 frames in.
I also made a comp from scratch and tried to render it to Adobe Flash Video with a wav clip and it crashes 30 frames in every time.
Please note when it hits frame 30 on the render, a window pops up ( a dos type window ) and then the window closes along with AE right away leaving me with no error messages or even an error log. I was able to get a screen cap of the error and it's attached.
I am running Windows Vista 64-bit and this is the first problem I've had with AE CS3.
Is this a known issue and is there a workaround for this?
-Charley

My apologies, I just found this support page and it helped me fix my problem:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403633
-Charley

Flash files with audio sound garbled or high pitched

Similar Messages

Maybe you are looking for