Flash h.264 PS3

Hi There
We have encoded some video using the Digital Rapids Nero
H.264 codec. In our Flash player in a browser it plays fine. In the
Flash player on the PS3 the video is black but the audio plays.
This is both from a FMS server and just off an http server.The PS3
is running the latest firmware. I was wondering if anyone else
encountered this, or if there is something different about the
Flash 9 player on the PS3 that requires h.264 files to be encoded
differently?
Cheers
Ian

It might be worth contacting Adobe with these types of questions.
You can contact Adobe by clicking the Contact button at the top of this web page.

Similar Messages

When will Adobe upgrade the flash player For PS3?

??????????????

Battery life is but one of many reasons Apple didn't approve of a Flash player for iOS. However, as stated by Stedman1, Adobe has stopped future development of all mobile flash players, not just iOS.
There are some third party apps in the App store that will allow some flash content to be utilized. Puffin, Skyfire Photon, Playable, are just a handful of the apps available in the App Store. Feel free to try out some of those, but read the descriptions and reviews first to make sure it will allow the types of content that you are hoping to access.

I can't use PS3 and Laptop at same time ?

OK I'm hoping although strange this might be a simple as changing a setting in my hub or laptop, here goes:-
Like many housholds nowadays I have many things connected to my Hub, Desktop, Ipod, Phone, Sky, games machines,etc
Well the problem I have, is when I stream Netflix or Amazon prime on my PS3 it buffers a lot or wont go HD for quite some time, no problem I switched to a wired set up, which helped with speed a lot, happily watching movies of an evening,
then one evening, it kept saying it's taking a long time to sign in, and wouldn't, I re check my network settings, and it shows unable to obtain an ip address,
so I set up the wirless again, and the same problem,
anyway after a few nights of this, I get a bit fed up, then out of the blue, it works again, both wireless and when I switch back to wired,
so I settle down to watch a film, fire up laptop, and after a few mins it flashes on my PS3 I have been disconnected, I peice things to gether and realise, when I have laptop on I cant connect PS3, even if laptop is wirless and PS3 wired ?.
I assume they are both using the same ip ?, I deleted the laptop from my Hub in the hope it would assign another, fired up PS3, and then re booted laptop, but straight away it kicks out PS3.
I have mooched arround in hub advanced settings, but I dont know what I'm doing, so not going to adjust anything, so if it is just a case of modifying my laptop or hub settings, if someone could instruct me I would be greatful, and if its not thought to be that HHEEEEEEEEEEEEEEEEEEEEEELLPP Please
Thanks in advance
Chris
P.S. I have searched the forums, there seems to be a lot of PS3 connection problems, but nothing that matches my particular problems

No I'm afraid that didn't work either

Stitching Flash Videos

I'm curious to know how to create a final edited cut of
multiple media clips together once their ingested and Flash encoded
onto a server and then save it as a single (Flash H.264) file. I'm
trying to recreate something like Adobe Premiere Express or
JumpCut.com functionality for a project. Thanks in advance to
anyone replying.

I have a Flash slide show on the home page of my website that has stopped working in FireFox 8.01. The Flash movie plays fine in other browsers and on PCs running FireFox, but not on either my MacBook or iMac running FireFox 8.01.
Works fine on my Brother's Mac running Firefox. But not on my 2 machines. VERY strange. I have reinstalled everything I can think of.
The web address is http://www.cruisereport.com

Snapz Pro X and Final Cut Pro

I'm screen capturing QuickTime movies of usage of a website via a web browser to include in a video production. I'm using Ambrosia's Snapz Pro X to do the video capture. I've sized the browser to 720x480 for the capture. I'm exporting the capture using the animation codec (which looks much better than a DV stream), but it comes in at 8 frames per second, which doesn't mesh with my timeline (at 29.97 fps).
Is Snapz Pro X a good solution to do this, or is there a better program to do this? If Snapz Pro X is a good choice for this, what settings should I change in the program to get the best video for use in Final Cut?

AFAIK Snapz records the screen activity into RAM as OS-level screen calls and then renders the file to your drive with whatever CODEC you choose when you save the clip. So the choice of CODEC won't affect the frame rate, but the size of the capture frame will.
The Animation CODEC is the best choice as it retains the full fidelity of the screen grab (no loss of quality). The main thing to remember when configuring the Animation CODEC is to set the keyframe rate to 1 (every frame is a keyframe). Final Cut does a bad job of handling key frames in the Animation CODEC when making cuts edits between keys - you'll get weird artifacts.
This makes for big files and Final Cut will want to conform the clips to 29.97 (or whatever timebase your using) so it will need to render the clips before you can edit them. Make sure your timeline is set to the same frame size, CODEC and KEY FRAME rate as the clips coming in.
Once you've done your cuts and are happy with your edit, output directly to whatever delivery CODEC your going to use: MPEG2 if DVD, Flash, H-264 etc for web. Avoid rendering to DV as the DV CODEC slaughters text and hard edged objects.
My two cents worth.
Chris

I have project I want to run and need some information

Hi
I have project I want to run and need some information about technical, consultancy, architecture design
and what I need for this project (hardware and software(
I planning to stream live streaming 24 channels,
The feed is analog from pal STB cable or satellite.
I want to stream in 2 different resolution and bit rates
1. full screen 750-850k
2. 240x360 400-600k
the format is flash h.264
The channels are series, sport, news, and movie.
What recommended card (i have osprey 450e)?
What kind of requirement of computer I need (CPU, MHZ, CORE, RAM).
can i use i7 cpu or xeon cpu?
how many channels i can run in 1 computer?
I need cheap solution for this project around 20-30k$ for hardware.
thnaks

I am working on a similar project.
Actually, i can encode 2 streams in h.264 with a resolution around 640X480 on a Intel Xeon E3120 (2 core) 3.16 GHZ configuration.
OS is a windows XP 32 bits. CPU usage is around 75%.
(note: FMLE instances are run with FMLEcmd not GUI mode)
Does someone know if i can gain performance with windows XP 64bits ?
My goal is to encode 4 streams on a single machine, does someone know if a dual CPU, let's say 2 X (4 core) Xeon, is enough ?
I don't know if FMLE support multiple processor with multiple core configuration.
I am maybe wrong, but after reading this forum, it seems many people have problems using FMLE under windows vista. Do we gain performance on Vista vs XP ?

Aspect Ratio Issues in CS4 -- no real 16:9 / 4:3? Need Help.

Hi,
i´m a little bit confused.
When we work in PAL Land -> 1024x576 is 16:9 Pixel Ratio 1:1 and 768x576 is 4:3 Pixel Ratio 1:1. In CS3 we have 720x576 with 16:9 Pixel Ratio 1:1,422 so 1,422x720=1024 so correct 16:9 and with 4:3 Pixel Ratio 1:1,067 so 1,067x720=768 so correct 4:3.
Now there is CS4:
Pixelratio changed for 16:9 it is 1,4587 and for 4:3 it is 1,0940. OK Maybe now we go with 702x576. BUT: The Resolution for DVD PAL Export is still fixed 720x576. NO 702x576 is possible!. So what the Hell is going on here? If i Export any Video in 16:9 PAL DVD i get 720x576 with 1,4587 so the result is a Video which is to wide with black borders (left&right side).
Any Ideas appreciate .
-nick

a) PAL in digital format, for example on Digital Beta, is aspect ratio 4:3, and 720x576. The sync lines from in the captured Digibeta have to be cropped.
b) PAL digital format aspect ratio 16.9 (widesrceen), for example when capturing from DigiBeta cassette, is also 720x576 but anamorph.
c) PAL 4:3 transcoded to square pixel format for computer use, for example as VP6 flash, or H.264 format is 768x576, aspect ration 4:3.
e) 720x576 Pixel-AR 12:11 normal, 16:11 anamorph, transcoded to square pixel, e.g. VP6 flash, H.264 etc. is 1024x576 real (not anamorph)
d) 704x576 Pixel-AR 12:11 normal, 16:11 anamorph is the analogue TV-Signal without overscan. If you receive a video like that you have to re-render it to 720x576 anamorph, or using a workstation which can interprete this footage. As far as I know, Premiere has no problem interpreting this footage, however, for example EncoreDVD will refuse to interprete it, but also other authoring application accept 704 video and the DVD plays the corrcet aspect ratio, but when demultiplexed it is still 704.

CS5 and ScreenCap Movies (Snapz Pro)

Im captuing full frame rate (30fps) screencap with Snapz Pro and have the option to then render each capture to "anything Quicktime can render to".
I know I need to choose something that will play and cut well in PPro but I also want to maintian the larger and non standard sizes of the movies (so i can do pan and scan)
anyone have tips of what is a good workflow here?
Like what settings to render to
And how to get it into PPro and working right in the timeline?
(if I am bringing in into a 1080p 30 fps video project or a 720p 30 fps project for example)?

AFAIK Snapz records the screen activity into RAM as OS-level screen calls and then renders the file to your drive with whatever CODEC you choose when you save the clip. So the choice of CODEC won't affect the frame rate, but the size of the capture frame will.
The Animation CODEC is the best choice as it retains the full fidelity of the screen grab (no loss of quality). The main thing to remember when configuring the Animation CODEC is to set the keyframe rate to 1 (every frame is a keyframe). Final Cut does a bad job of handling key frames in the Animation CODEC when making cuts edits between keys - you'll get weird artifacts.
This makes for big files and Final Cut will want to conform the clips to 29.97 (or whatever timebase your using) so it will need to render the clips before you can edit them. Make sure your timeline is set to the same frame size, CODEC and KEY FRAME rate as the clips coming in.
Once you've done your cuts and are happy with your edit, output directly to whatever delivery CODEC your going to use: MPEG2 if DVD, Flash, H-264 etc for web. Avoid rendering to DV as the DV CODEC slaughters text and hard edged objects.
My two cents worth.
Chris

[Z77A-G45, S01, S40, S03 & G45 MVP] BETA Version [E7752IMS.2xx Releases]

E7752IMS.250 ==> E7752IMS.264
1.Fix the keyboard QPAD MK-85 cant use in setup.
2.Fix core Ratio Limit can not load default in BIOS setup menue after "Click BIOS2" change core Ratio Limit value.
3.Fix system reset after enable item"Adjust CPU Ratio in OS" and then press F11 to get boot menu.
4.Change some item string
5.Fix adjuest cpu raito function error issue.
6.MRC Fast item show only when use user password.
7.Fix show oc fail message when set CPU Base Frequency to some frequencies like 10001*10khz
8.Fix XMP auto enable when use IVB CPU and dram ratio is auto
9.Fixed fast boot caused s3 reset when press ¡°F2¡± after cpu memory change and OC retry fail .
10.Update vbios 2137.
11.Fix use PS2/USB Keyboard combination key(Shift+.. /Alt+.../Ctrl+.... ) Can't to Set name at BIOS Setup.
12.USB KB Can't Use at Post when Connect up PS2 MS and usb kb On the mainboard.
13.Fix sometimes tpm item lost in setup.
14.Fix the "Event Kernel-Power 137" error event log shows while resumed from HS3/S3 with Core i5-3470 and Core i5-3570 on Win8 systems.
15.Fix TPM item enabled issue when load default after.
16.Update USB module to 22.
17.Fix OC Genie setting not set to item after OC Genie function enable.
18.Fix sometimes system will hang up in the shutdown process after idle it for some time.
19.Set CPUEnergyReadEnable & CPUTempReadEnable default to disabled.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

E7752IMS.264 ==> E7752IMS.266
01.Add new bom Z77A-G45 MVP.
01.Fix some memory cause bios hang 0x3b or 0x4f when overclock cpu ratio to 42.
02.Finetune G.Skill memory command rate timing.
03.Support amp function.
04.Fixed MSI keyboard ES300MU can't detect.
05.Fix the issue that setting item "Command Rate" to 1t causes an unnecessary cold reset when bios was postting.
06.Fix some PCIE card can¡¯t detect issue.
07.Fix use usb card reader error issue when update usb 022 module.
08.improve memory performance.
09.Fix DRAM frequency incorrect issue when use Patriot PV316G213C1K memory and XMP is enabled.
10.Fix Adjusted DRAM Frequency and XMP info incorrect issue when use XMP 3000 memory and if XMP 3000 profile is enabled then force run 2800.
11.Fix Adjusted DRAM Frequency incorrect issue when XMP is enabled and set different DRAM frequency.
12.Add Gigadevice 25Q64BSIG" SPI ROM support.
13.Fix system hang on 0x55 issue when use Team Team-Elite-1866 memory.
14.Fix system hang on 0x55 issue when use SPD 800MHz memory and Sandy Bridge CPU.
15.Fix item "Internal PLL Overvoltage" always Enable when over clock cpu ratio.
16.Set item "Intel C-State" to enabled when use some special cpus
(such as i5¨C3475s which oc ability are limited) to over clock
cpu ratio to the ratio higher than the ratio 4 cores can reach
at the same time.
17.Fix item "Adjust CPU Ratio" show error when adjust cpu ratio.
18.Fixed PLL function enable caused set tRTL timing hang issue.
19.Add language: Indonesian,Thai and Vietnamese Finalize.
20.Add M-Flash support ME FW update solution.
21.set SMLink1 Thermal Reporting Select to ture.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

New trouble streaming video

I've got a PowerBook G4 1.67ghz 15"display laptop. I know it's old and slow and all that but I've been using it to watch video on the internet for a long time now. Up until about a month ago, I had no trouble at all. Suddenly, hulu.com started streaming in really choppy and crappy. Now other web sites' video plays back choppy too. I've gone through troubleshooting and suggestions for various players and websites but nothing seems to be working.
Does this mean my video card is failing?

no, nothing is faulty, but the quality has increased with these services. almost all of them are using flash & h.264 to encode the video. decoding for playback is very CPU intensive.
quit all other apps & use camino browser (mozilla based) as I found it uses the least system resources to run.
otherwise, a newer Intel machine, 2.0ghz Core 2 Duo or better is about your only fix.
http://caminobrowser.org/

How to show a MPEG4/H.264 video in Flash in an HTML page?

Maybe my title isn't clear. I am hoping someone can shed some
light on the h264 use in flash.
Instead of displaying a progressive download .FLV video , I
am trying to have an MPEG4 /h.264 approx. - a 30meg video display
in flash in an .html page. Quicktime is easy to do, but Flash is my
goal.
I read several articles on h264 and flash 9, including this
adobe
H264 article but was hoping there might be an easier and maybe
quicker solution. I did try renaming the .mp4 extension to .flv in
dreamweaver but it did not display the video. (...unless it was
downloading the video completely before displaying...not sure)
There is a ton of sites, blogs and articles on h.264 and how
flash 9 will display it...but when it comes to how one might
actually have h.264 in flash on their own site...I am finding it
difficult to figure out.
Forgive my lack of action script and Flash knowledge...any
direction is appreciated.
Erick

...well I did follow that article on playing an h264/mpeg4
video in flash. It works well, but how would you add playback
controls?
FLVPlayback component only allows you to source an FLV video
not h264/mpeg4.
This is probably a simple as3 answer...but I am not
knowledgeable on as3 to know what code to add.
Any suggests or direction that I should look would be great.
In the meantime I am researching actionscript 3 to find and anwer.
E.

Adobe Media Encoder CS4 H.264 iPod video format green flashes in Quicktime

Quicktime 7.3.1 apparently shows no flashes but 7.4.5, 7.5.5 and 7.6 all show green flashes on videos encoded in AME CS4 H.264 iPod video small.
No other quicktime versions tested.
Videos play fine in VLC Player and Adobe Media Player.
Videos encoded with the latest MediaCoder sourceforge application play fine in Quicktime.
Clearly something's wrong with the way Adobe exports and the way quicktime 7.3+ reads H.264 videos.

I think it may be the QuickTime Player issue and not Adobe Media Encoder. Its seems to play find in other players like Adobe Media Player and Windows Media Player after installing Windows Essentials Media Codec Pack 2.2c. (http://download.cnet.com/Windows-Essentials-Media-Codec-Pack/3000-2140_4-1066270 9.html). Haven't check to see if it plays correctly on my i-Touch. Not all videos I encode from .AVI to .MP4 using the i-Pod small preset seem to have this issue.

Media Encoder CS4 problem with h.264 QuickTime- Green flashes

I have been using Premiere/Media Encoder CS4 on both a Mac and PC. I am having problems encoding using h.264 HD (720p) settings. These are the problems I have had:
When I encode on both platforms (using many different settings) the video plays back fine on the latest version of QuickTime on the Mac.
On the PC using the latest version of QuickTime the exact same video stutters and flashes green.
When I downgrade my version of QT on my PC to 7.4.5 the video plays fine.
With the downgraded version of QT and then encode the video again using the same settings. The video has the same mentioned problem on ANY PC with the latest version of QT.
I would like to say that this is just a QT problem but when I encode the videos using someone elses computer with other software (Sorenson Squeeze) using the exact same settings the video works fine on all platforms.
I need to distribute these videos online so I have no control over what version of QT people will be using to view the video so it is not enough just to say use the older version of QT.
Thanks in advance for help.

There have been several instances, such as you describe, on the forum lately. Do not recall any exact resolutions though. I'd seach for "green flashes," as that exact phrase has been used in many.
On the PC using the latest version of QuickTime the exact same video stutters and flashes green.
Is this with QT 7.6.2? Many had major issues with the QT 7.4.x versions and Adobe software. The QT 7.5.5 version seemed to fix most of those, but another user was having issues with it very recently, and there have been some, who have also had issues.
It seems that QT will work with Adobe products for a bit, and then the next upgrade, or two, will fritz up the whole works.
Wish this was not such a "moving target."
Good luck,
Hunt

MP4 H.264 video won't play in Flash Player

I am using a Mac Book, OS X 10.8.5; FireFox 32.0.1; Flash Player 16.0.0.305. I am trying to play video (MP4 H.264 format) that works on VLC, Quicktime Player & Real Player but won't play through Flash Player. Why?

I'll take a look at the GPL sources to see how the firmware encodes the video output, I think the mpeg encoder might be built into the firmware's Linux kernel (instead of a stand-alone encoder program), I see references to the IBM mpeg2 headers but I'm not sure. But honestly addressing this possible bug is not the first thing on my todo list, but I do fidn this report interesting enough to merit investigation.
May I ask what you are using for the Samba server (aka windows shares)? Do you use your desktop PC, or perhaps a NAS server?
As an interim thing to try, I advice you install VLC media player to view the files, or to use VLC to examine the media files properties to see what you can findout.
IF you must use Windows media player, then I suggest you look into the combine community codex package.
www.cccp-project.net/

Creating H.264 FLV file as per Spec, does not play with Adobe Flash Player 10

1] We have developed an application to encapsulate H.264 video inside FLV container, following the "Adobe Video File Format Specifications 9". According to the specification the H.264 video data is embedded in FLV tags, as follows
FLV Headers: Meta Tag: Sequence of Video Tag.
But in spite of following the specifications, Adobe Flash Player (version 10) could not play this FLV file. However, some players were able to play this FLV file. The fact that Adobe did not play it was very surprising.
2] We searched and finally found one FLV file, which contained H.264 video (unlike others which usually contained Sorenson's H.263). This file was played fine by Adobe Flash Player. So it led us to investigate further and we found that
[A] the video tag was preceded with 2 byte length of the every "contained" H.264 NALU. This applied to all the NALUs / I-slices/P-slices and so on. This is not documented.
[B] Only the first video tag (containing video sequence params), is preceded by the sequence "01 4D 00 15 FD E1" followed by 2 byte length and then the video data (sequence parameters in this case). What are these additional bytes ? where are they documented ?
Could you pls share your views about the above and point us to the documents, if any, which are in agreement with the above observations.We think there is a discrepency in the document related with authoring FLV file with H.264 content.
Thanks,
Abhijeet Wakle
Sigro Systems

You could push it out to one or two users and test. Moving up to the latest version of Flash Player is USUALLY a good idea, however, if you happen to be on Captivate 4, be aware that there was an issue reported some time ago that once you upgraded your development machine to Flash Player 11 it interfered with publishing out courses. I cannot remember seeing a bugfix issued to Cp4 users for this (someone correct me if I'm wrong). If you're on Cp5 or 5.5 this shouldn't be an issue.

Flash h.264 PS3

Similar Messages

Maybe you are looking for