Flash header in iWeb - Links not working

Here's the situation: I managed to get a flash header to show up on my site by using an HTML Snippet. There are three buttons in this flash file. Each of them open up drop-down menus with links to different pages found on the site.
Currently, when I load up the site in my browser, only the drop-down menus open and do what they're supposed to. The links within those menus do NOT work.
The question: How do I properly create links in Flash so that they'll navigate to the urls I specify? Any help would be greatly appreciated; I'm kinda in a rut until I figure this out. Thanks!

The most obvious thing to do is to ask Flash question is the Flash forum :
http://forums.adobe.com/community/flash
Or search the Internets : [links in flash|http://www.google.com/search?q=linksinflash]

Similar Messages

Embedded flash in PDF - Adobe links not working

Super annoyed here.
We have a bunch of PDF's used in public education by teachers all over which have flash embedded (yes some not so smart person created them)
Until 3 weeks ago Reader would send the user to the page: Acrobat Help | Flash Player needed | Acrobat, Reader XI
Which had two links in that would make Reader work with the embedded flash. (http modified so links will show)
hoop://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_ax.exe
hoop://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe
Now of course they just get 404 errors. We still get this msg with the latest version of reader and latest version of flash...
Now I can't find anything to get the embedded flash to play and I have Special Education staff screaming.
Not a happy camper.
Shooter

Yes, these links are old - I will try to get them updated.
The correct links are
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player for Mac OS X

External links not work

Hello,
I have a word document that has external links. Text that
links to other page or other url.
When I convert my doc (word document) into a swf using flash
paper 2 the links not work. There are still highlighted but no
linking is taking place.
please help me.
Thanks
Alejandro

I am having the same problem. At first I thought it was
because I had converted an excel file but I tried the same
information from a word document and the links do not work in the
browser or if I view the SWF file separately. Additionally, when I
convert the word file to a pdf none of the hyperlinks to pages or
documents work but the links to email addresses do.

Flash Global Security & Links Not Working?

Hi all,
I am absolutely near some sort of breakdown with my Flash website....I really hope someone can help!
I am building my portfolio website; I'm using Dreamweaver CS3 (on Mac) and inserting Flash animations in the centre of a table in each Dreamweaver page. All was working fine until I built the Contact page animation on Flash last night. I linked in some external websites to my Blog, Flickr and Twitter and also need a button to launch the user's default mail client.
When I tested the animation (CMD+ENTR) in Flash the links appeared to be working, if after a few clicks. I then inserted the Contact animation into the Contact.html page on Dreamweaver and tested it in Safari. A dialogue box came up regarding something about security settings and Flash 8 (makes no sense as I am using Flash 9); and I ended up on the Global Security Setttings panel page on the Adobe website. I selected the entire folder the website is in on my hard drive under "Trust Files in these Locations". Now the ENTIRE website's flash animations are not working. There are links to internal pages of the site (i.e. a link to the "Contact" page in the animaiton on the Home page) which are now not working either. No error messages come up when I test the movie in CS3 either. I have refreshed Safari, restarted the Mac and redone the folder on the Global Security Settings panel. Also loaded the entire website onto a PC this morning, all links not working either.
Actionscript 3 on the Contact page looks like this:
import flash.events.MouseEvent;
//---Blog Button---\\
var getBlog: URLRequest = new URLRequest("http://www.myblogsdomain.com");
Blg_Btn.addEventListener(MouseEvent.CLICK, eClick);
function eClick(event:MouseEvent):void{
navigateToURL(getBlog, "_self");
//---Twitter Button---\\
var getTwitter: URLRequest = new URLRequest("http://www.twitter.com/mydomain");
Twt_Btn.addEventListener(MouseEvent.CLICK, eClick1);
function eClick1(event:MouseEvent):void{
navigateToURL(getTwitter, "_self");
//---Flickr Button---\\
var getFlickr: URLRequest = new URLRequest("http://www.flickr.com/photos/mydomain");
Flkr_Btn.addEventListener(MouseEvent.CLICK, eClick2);
function eClick2(event:MouseEvent):void{
navigateToURL(getFlickr, "_self");
//---Email Button---\\
var getMail: URLRequest = new URLRequest("mailto:[email protected]");
Eml_Btn.addEventListener(MouseEvent.CLICK, eClick3);
function eClick3(event:MouseEvent):void{
navigateToURL(getMail, "_self");
I'm not 100% sure if the e-mail AS3 I set up is correct, but as none of the links are working I can't test it. I cannot provide a link to the website as it isn't uploaded yet, and I don't really want to upload it not working properly.
Any help at all would be gratefully received, I'm really, really on the brink of some sort of breakdown. Thanks.

Thanks Samuel.Wong and Ned Murphy for the information.
I'm not actually sure what happened but my website suddenly started working again today, I think possibly by selecting "Always Allow" on the Global Security Page as well as inserting every individual file as well as the folder under "Trusted Locations" has also done the trick.
The external links appear to work when I test the movie in Flash CS3, but the same warning comes up once the movie is inserted into a Dreamweaver html page and tested in Safari. However I think when the links (all except the email ) appear to be working in Flash then it should be just fine once uploaded onto the server. Many thanks for your advice once again.
Maxx

Flash player download web site not working

After uninstalling flash player, I can't get the web site to reinstall it. I go to the web site click the agree and install now and gos to the next page but nothing pops up like it said it should.
http://get.adobe.com/flashplayer/thankyou/activex/?installer=Flash_Player_10_for_Windows_I nternet_Explorer&i=McAfee_Security_Scan_Plus&d=Google_Toolbar_6.3

Hi eidnolb,
My OS is windows 7 Ultimate. There no Service packs listed Microsoft don't have one for it yet. My brower is Internet explorer 8 version: 8.0.7600.16385. My firewall is not causeing problems and the popup blocker didn't even activate.
Date: Wed, 14 Apr 2010 10:01:33 -0600
Subject: Flash Player flash player download web site not working
Hi newcomer76, Please post back your operating system and if any applicable Service Packs, any and all browsers that you use with the versions.
With that information, I'll be able to give you instructions and the links you need.
Thanks,
eidnolb
>

Adobe Edge links not working

Yeah I have also experienced links not working when I import my .oam file from Adobe Edge Animate also. Is there anything the Muse team is doing to fix this issue? I need a response from you guys by the end of the week. my company website is malfunctioning due to issues with your software. If there is some sort of hotfix please let us know.

When you install the software illegally, using a volume license, there is a script you can run that will enter all of the adobe servers into your local DNS hosts file so the software can be activated. This makes accessing those domains impossible. This scenario fits the description of your issue, not suggesting anything beyond that.
The hosts file is in /private/etc/hosts and can be accessed through the terminal:
sudo nano /private/etc/hosts
If you see a bunch of adobe servers in there, that is your problem.

FLASH PLAYER 10.1 does not work on my 32bit browser

the newest version of FLASH PLAYER 10.1 would not work on my 32bit FIREFOX browser. so I installed flash player on a 32bit VERSION of internet explorer. it worked fine for a few days till ADOBE asked me if i wanted to update my player. NOW IT DOES NOT WORK ! ! ! NOW IT DOES THE SAME "GREEN FLASHING BLANK SCREEN THING" THAT IT DOES ON MY FIREFOX BROWSER ! ! ! WHAT GIVES ? ! ? ! ? !

Hello I have a Dell inspiron 6400 computer with window's home vista and with the latest standard Internet explorer. i was enjoying the fact that i could watch Youtube and other such sites until i was prompt to downlaod the latest version (10.1) flash player. which like anyone else I did, but not the mcfee anti virious as it would be inconflicsion with Norton anti virious.
Now when i go to view a youtube etc I just get a blank or black screen.
Please how can i rectify this problem
ta,

Add new document link not working in upgraded sharepoint 2013?

Hello there,
Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
is working fine with environment Office web apps not configured with Sharepoint.
Looking resoluion /suggestion, thanks in advance.
Regards,
Sushil

Hi Sushil,
According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
from 2010 to 2013.
For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
1.In SharePoint 2013 Central Administration, click Manage web applications.
2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
it using claims-based authentication, or you can change the authentication method of the web application.
Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
To do this, run the following command on the SharePoint Server:
Get-SPWopiZone
The result will be one of the following:.
internal-https
internal-http
external-https
external-http
Next, run the following command on the SharePoint Server.
Get-SPWOPIBinding
In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
the WOPI zone to match the result from Get-SPWOPIBinding.
If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
For more information, please refer to the article:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

Fresh Install HCM 9.1 but Links not working. Help please

Dear All,
I'm trying to make a switch from SAP to PeopleSoft. I tought it easier to install PSFT since the number of source to install is much less than SAP. However, I kept getting same error where the links not working no matter which environment I tried to install.
I downloaded all software from eDelivery.
HCM 9.1, PTOOLS 8.52, Oracle 11g 64 bit, Oracle Client 32 bit.
First Try:
Install on windows 7 64bit. Everything works fine until first login to the PSFT and all links not working.
Suggestion from Hakan is to apply the patch and gave me a link to the old FTP site. I downloaded the 85209 patch but got password.
Finally I managed to get a customer ID from a friend and downloaded Patch 85211 and applied. But got java error so I scrapped it.
Anyway, Gasparotto said the environment is not certified and will not fix my problem with the patch.
Second Try:
Installed Virtual Box.
Installed Windows 2008 R2 and applied the SP1.
Installed everything all over again.
Ensured the PTWEBSERVER password similar the username.
Everything works fine but when login to PSFT, again..... links not working and see on the bottom left corner there are some javascript error where they cannot find certain peoplesoft objects..
Just upgraded to IE 9 because I read somewhere IE 8 is not certified.
Tried to login again, no error message and everything looks fine but... links not working.
Logs also looks normal to me.
Does anyone ever encountered similar issues before?
Does this is a normal behaviour before tools patch 85211 being applied ?
Thanks,
aLuNa
My APPSRV Log:
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Cache Directory being used: C:\APPSRV_CONFIG\appserv\HCDMO\CACHE\PSSAMSRV_100\
PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Server started
PSRENSRV.2808 [11/03/12 09:04:49](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is RENGRP(92)/101
PSRENSRV.2808 [11/03/12 09:04:49](3) Switching to new log file C:\APPSRV_CONFIG\appserv\HCDMO\LOGS\PSRENSRV_1103.LOG
PSADMIN.2124 (0) [11/03/12 09:04:52](0) End boot attempt on domain HCDMO
PSAPPSRV.1488 (3) [11/03/12 09:13:16 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091316_1488.3, Token=PSFT_HR/2012-11-03-02.13.17.193528/PTWEBSERVER/ENG/XxZ3vyJWXF/S1MoQtG2Wox6wGJA=
PSAPPSRV.1488 (5) [11/03/12 09:13:21 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091321_1488.5, Token=PSFT_HR/2012-11-03-02.13.22.193632/PTWEBSERVER/ENG/pS6ec6pIAJJSYc1oOWcNYiR0UFQ=
PSAPPSRV.1488 (7) [11/03/12 09:13:29 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091329_1488.7, Token=PSFT_HR/2012-11-03-02.13.30.193285/PS/ENG/3GnOezS6D9PUlzwrjPwqexv4ir0=
PSAPPSRV.1488 (34) [11/03/12 09:18:47 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091847_1488.34, Token=PSFT_HR/2012-11-03-02.18.48.194158/PS/ENG//oJB5tvSHYNzsmZ2Gs4g2vBLUVs=

alunwawa wrote:
Does anyone ever encountered similar issues before? Yes, I did already see the same, that was when installed the same with 8.52.00 (without Peopletools patch) or without applying the patch project...
Does this is a normal behaviour before tools patch 85211 being applied ?Without patch, you have the error you mentioned. How many time I told that 8.52.03 min. is required, I did not go further, but there was some bugs before which make it not working.
I understand that's rather frustrating for people who wants to jump to Peoplesoft. I don't know SAP, but here you go, Peoplesoft is not a simple toy.
Unfortunately, if you have no access to My Oracle Support to get the Peoplesoft patches, you have no way but work on Peoplesoft OVM (free of use), and to use them on VirtualBox, the Jim's articles are worth to follow.
Nicolas.
PS: @Jim, thanks for the kind words.
My last install guide is quite old now (PT8.50/Linux), even though it did not change very much within the last tools 8.52. But seeing the number of time such questions have asked over here (PT8.52 on Windows), I'm thinking to write one more, that time on Windows.

Purchased Lightroom 5 and Download link not working. Please advise

I have Purchased Lightroom 5 followed the download instructions and Download link not working.
I get a dialog box stating that I have Explorer 4 and I need a later version.
I am in fact running Explorer 10.
Please advise.
Bob Spree
England

Please see http://forums.adobe.com/thread/1229333 where this topic has been discussed.

Links not working correctly in PCUI for CRM

Hi All,
We are implementing mySAP CRM 4.0 through PCUI on Portal
EP6 SP14.
I have integrated the CRM Business Package 60.2 in Portal.
Proper User has been created in the backend and assigned Sales Manager Role both in the portal and in the CRM backend.
We are facing problem of links not working in the CRM Contents. When we click on the links in the CRM Portal Contents ( BSPs) we dont get the desired application opening.
When we click any links in the BSP's ( Activity Links in Opportunity Management BSP ) we get a blank page popped up.
I have the screen shots with me. Any one responding can get the screen shots from me.
Thanks in Advance
Rohit

Rohit,
Have you maintained configuration in (transaction CRMC_BLUEPRINT_C --> Navigation (URL Generation) --> Assign Object Method to Role)? Be sure that the role that you are using is present and ID Page/Service field correctly points to the pcd url for your portal.
When testing, it may be helpful to set parameter CRM_URL_BUFFER_OFF = X on the user profile (SU01) to turn off the url buffer. That way changes made above are immediate.
Best Regards,
Bernard

Web links not working in iPhone calendar notes. Used to work. Ideas?

Web links not working in iPhone calendar notes. Used to work. Ideas?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

Why Does Dynamic Link Not Work

I purchased the CS5 Adobe Production Premium. I have been working in Premiere and I have been learning about how to use Dynamic Link. I want to be able to alter clips in After Effects and bring them back and forth into Premiere. When I go to File/ Adobe Dynamic Link/New After Effect Composition, I get this message:
Adobe Dynamic Link Requires Adobe Production Premium.
Since I own production premium, I do not know why I am getting this message. I have reinstalled the CS5 Production Premium Software twice and it still gives me the same message. What can I do to get Dynamic Link Working.

Thank you for the tip. Could you possibly tell me how to deactivate and
then reactivate the suite. I am using a Macbook Pro laptop running OS
10.6.4. I do not even know where to start.
From:   Colin Brougham <[email protected]>
To:     Dan Seanor <[email protected]>
Date:   03/15/2011 09:55 AM
Subject:        Why Does Dynamic Link Not Work
Deactivate the software (not uninstall), and then reactivate the suite.
This often fixes this. You can opt to leave the serial number on the
system; no need to clear it and re-enter it.

IWeb is not working!!!!!

My iWeb is not working right!!! All the widgets (exept for iPhoto and iMovie) do not work, every time a place the widget it just shows a selection square were the widget should be. The same thing happends when I chose to show the navigation on the top of the page, just a blank box. I have already called the apple support and tried many different things, like uninstalling iWeb and nothing changed then he took me thought endless steps for hours and nothing. I also went to an apple store and no one there new how to fix it ether. I need this fixed NOW!!!
Please help!!!

I would go to an apple store and talk to someone face to face but the closest one is over 800 miles away. I tried to talk to someone in an apple store wile I was on vacation but that did not have room for me. But I did get a chance to talk to a sales man and he didn't know jack.
I have already uninstalled and reinstalled with the application disk and it did not do anything. I have also tried accessing the widgets on another account and I have the same problem. I could try the download though, that might just work.
I have also had the problem of, when I make a 'blog' the box that should have the blog excerpts Is also blank and I can't even double click it, and when I do it just does what everything else does and shows a blue outline around the box and nothing else.
I wish someone knew something about this problem!

Flash header in iWeb - Links not working

Similar Messages

Maybe you are looking for