Flash header in PHP includes module site issues
Is there any way to get my flash header not to reload
eachtime in php inludes?
This is a php module website with music controller in flash
header. I don't like the music restarting everytime I click on a
link in the page.
I hear frames is not a good idea.
any ideas?
below is the website mock
http://www.point1music.com/test
Jeff
Website in
question
The requested URL
/clients/One_Pensacola/Scripts/AC_RunActiveContent.js was
not found on this server.
You must upload the Scripts folder that DW creates when you
insert the Flash
header.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"MelBLott" <[email protected]> wrote in
message
news:gfs7ov$1no$[email protected]..
> I've created a flash header located below the menu bar.
The menu bar is
> within
> an include. I've built a few sites with this same basic
format, but only
> this
> time when publishing to the live site, the flash file
will not appear. I
> can
> test in browser and it works and once published I can
right click and view
> source. It is including the file in the code, but it
just will not play.
> I've
> tested the flash file separately from the html page and
it's working fine
> by
> itself. Any suggestions as to what I've done wrong? The
file has a
> transparent
> background so that the css built background tiling shows
through in areas
> of
> the flash file. I didn't know if this might've affected
it. Here is the
> link to
> the test site/page -
>
http://marketingallianceinc.com/clients/One_Pensacola/plans_test.php.
>
Similar Messages
-
Help with PHP Includes on localhost
Hi,
I have a very simple index.html file with a header div. I have put an include into it like this:
<div class="header">
<?php include("includes/header.php"); ?>
</div><!-- end .header -->
I have follwed David Powers setup_php to link to my localhost, putting the whole developement web in c:\websites\localhost\crown.
The actual header.php is in a subdirectory of crown called includes.
When I publish the site to a live server it works perfectly but not on locahost or in liveview.
I don't get any errors, just an empty header bar on the page.. I do get a warning across the top of the screen that I haven't installed flash(which I have)
I believe php is working OK on my localhost as running the php file direct in both liveview and F12 works OK.
BTW, I'm running CS5 on 64bit Win7 home premium. I've installed Apache 2.2.15 and php 5.2.14.
Any pointers greatly appreciated as I'm quite new to this.
Thanks,
TimThanks for that. It made me check.
My live server has it because the PHP Includes work there.
There is an identical htaccess file on my localhost.
So good helpful pointers but doesn't solve my problem of PHP includes not working on my localhost test site.
Tim -
If I put a tag like this <?php include ('menu.php'); ?>
in my file, I can only preview it after putting the file on a
server. How can I preview it in my local computer without uploading
the files to a server?
ThanksThe use of virtual or a root reference in the include
function forces Apache
to look at its root folder for the files. It will not find
them there, and
therefore the include will fail. The only way to make this
work would be to
set up virtual hosts, in which case the root of the site is
always the
virtual root you have specified in the httpd.conf file.
Your use of the $_SERVER['DOCUMENT_ROOT'] autoglobal will
work on the
server, but not within DW (I think).
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"polar_bare" <[email protected]> wrote in
message
news:glskk4$dnu$[email protected]..
>I did change the include to: <?php
virtual('/includes/header.inc.php'); ?>
> from: iv id="header">
> <?php include
($_SERVER['DOCUMENT_ROOT']."/includes/header.inc.php");
> ?>
> and it did display in DW, UNTIL... I save the file.
>
> I think it is how my web host is set up. When I changed
the include
> to:<?php
> virtual('/includes/header.inc.php'); ?> and uploaded
the page, I get an
> error:
> Fatal error: Call to undefined function virtual() in
> /home2/user/public_html/indextest.php on line 35.
>
> I searched this forum on how to set the base url for
includes in php and
> came
> up with the method: ?php include
> ($_SERVER['DOCUMENT_ROOT']."/includes/header.inc.php");
?> which works,
> but
> design view does not show it. No Big Deal.
>
>
http://www.jhcarpenter.com
>
>
> -
Problem with a flash banner in a php includes
I am creating a site that has many pages and I made an includes file for the header of the page that contains my navigation bar, i then made a template of the page to use for all my pages.
Now I have created a flash banner that i want to play in the header of all my pages but i´m having problems getting it to show on all the pages.
Firstly I added the flash swf into my includes file and inserted the flash into the includes file page using insert flash from the dreamweaver menu (code below):
<?php $currentPage=basename ($_SERVER['SCRIPT_NAME']);?>
<script src="../Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<div id ="adBanner">
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','468','height','60','title','advertise','src','advertise_banner','quality','high','plu ginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveF lash','movie','advertise_banner' ); //end AC code
</script><noscript><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="468" height="60" title="advertise">
<param name="movie" value="advertise_banner.swf" />
<param name="quality" value="high" />
<embed src="advertise_banner.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="468" height="60"></embed>
</object></noscript>
</div>
<div id ="NavBar">
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p><a href="index.php" <?php if ($currentPage == 'index.php') {echo 'id="here"';}?>>Home</a></p>
<p><a href="about.php" <?php if ($currentPage == 'about.php') {echo 'id="here"';}?>>About Us</a></p>
<p><a href="contact.php" <?php if ($currentPage == 'contact.php') {echo 'id="here"';}?>>Contact Us</a></p>
<p><a href="advertise.php?ad=y" <?php if ($currentPage == 'advertise.php') {echo 'id="here"';}?>>Advertise</a></p>
<p> </p>
</div>
Great the flash ad works when I load the includes page in a browser and when i look at all my other pages that have the link to the includes file the flash file shows as a grey box with F in the center, however if i load any of these pages into a browser the flash ad does not show.
I also tried doing exactly the same, adding the flash to the header of my template and saving it. However this did not update all of the pages that use the template, the flash ad would play in the browser if I load the template in the browser. (in this instance the actual swf file was in my templates folder with the template page).
The final thing i tried was just to add the flash to one of my pages just to see if it would work when i loaded the page into a browers, it didn´t and i don´t understand why as it worked on the includes page and template page. (the swf file in this case was in the file along with all the pages of my site).
It doesn´t seem that i have a problem with the actual flash banner, i just cannot seem to put it in the pages that i want to.
Any help or input in this matter will be greatly appreciated.
Thank you in advance.I don't know if this will be of any help but I have a flash rotator that I use on a few pages setup in a seperate file as well, here is the code from my include file
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="884" height="402" id="myFlashContent">
<param name="movie" value="/Image-Rotator-V2.swf" />
<!--[if !IE]>-->
<object type="application/x-shockwave-flash" data="/Image-Rotator-V2.swf" width="884" height="402">
<!--<![endif]-->
<a href="http://www.adobe.com/go/getflashplayer">
<img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
</a>
<!--[if !IE]>-->
</object>
<!--<![endif]-->
</object>
I also added the following to the head section of the page the flash is used on.
<script src="http://ajax.googleapis.com/ajax/libs/swfobject/2.2/swfobject.js" type="text/javascript"></script>
Regards
Richard -
PHP Include Issue On New Domain
I have had the site liquidfirefishing.com up and running for some time now. I am using a PHP include for the header and footer. I have uploaded the same site to fishlf.com and the header and footer files do not appear, no change to the code. I receive a warning telling me that there is no such file or directory. Please look at both links below and let me know what the issue may be.
http://fishlf.com/about/index.php
http://www.liquidfirefishing.com/about/index.php
This is the code I am using for the include.
<?php $path = $_SERVER['DOCUMENT_ROOT']; $path .= "/header.php"; include_once($path);?>The header.php file cannot be found in the root directory, hence either place it in the root directory or adjust the path to the correct directory as in
$path .= "/correctpath/header.php"; -
Question about using a PHP include for the head info...
Hi,
I'm currently using PHP includes for my site header and footer info.
All my js/css files and meta declarations are in the head portion, which is in the header include.
How would I go about giving each page its own individual TITLE if the modifiable content of my pages is inside the body only? Since we can't specify title inside the body, am I stuck with the same page title for each page on the website?Is it true that you header include file has the </head> and <body> tags embedded? It would seem a lot neater - and safer - to use two include files, one for the header and one for the body. That way, the <title> is not in either of them and you can do with it what you will.
Barry -
I'm currently in the process of setting up a new website, and since I'm using several elements that return on every page - I decided to use PHP Include to do this. Problem is that it works for my first pages - but once I go further into detail (read: further into directories), it gets entirely messed up.
My headers and footers don't show - and my spry menu which is also PHP Included only shows in text.
Strangely enough it works for my first pages, which are situated one directory away; to illustrate this further I quickly describe how my root folder looks like in the sense of directories:
ROOT:
EN (this contains my English pages)
DK (this contains my Danish pages)
includes (this contains my PHP Include elements like header, footer, menu)
images
I copied off of the internet the following code, to force the line to start checking from the root of the whole folder:
<?php
include($_SERVER['DOCUMENT_ROOT']."/includes/header.php");
?>
This seemed to work perfectly for my main pages directly situated in the EN directory, but once I'm a couple of directories deeper into the EN folder - it gets completely mocked up. I'm pretty sure this question has been raised many, many times, and believe me, I've looked around.
I read a lot about config.php - but because of the fact my knowledge in the terrain of PHP is fairly limited - this subject seems truly like Chinese to me. If someone has a guide for dummies out there - that would be great. Otherwise, my question is this:
How can I make sure my PHP includes show correctly and ACT correctly (in the case my menu) website-wide?
Thank you in advance for the help!!I've never quite gotten to grips with the way 'includes' work. They are a great asset to use but a pain the butt to manage unless you set up a virtual server locally.
I now always tend to use the full url to the include like:
For local development:
<?php include ('http://localhost/myWebFolder/includes/topNavigation.php'); >?
Then once I'm ready to take it to remote I do a site wide find and replace:
<?php include ('http://www.myWebSite.com/includes/topNavigation.php'); >?
Problem runs deeper than that though because if you bring in an 'include file to a document where the 'includes' folder is NOT in the same dircetory the links (if you have links) will be broken.
Typical example:
index.php gets the navigation 'include file' from the 'includes' folder sitting directly in the site root folder.
about.php which is in a directory named 'pages' also calls in the 'include file' from the 'includes' folder BUT it can't link back to the index.php page because the links don't have ../ they have index.php.
So now for any links included in the 'includes file' you also have to use the full url. -
Flash Header/Navigation Reload Issue
I have been researching all day and there are many different solutions, none that are straight forward. I am currently in the process of making a website in Dreamweaver which has a flash header. Problem is the flash header reloads when you go to every page. Is there a simple (I'm a noob) way I can get the flash header to stay open at the top of the website, and the content of each page just change when you go to each page. Thus the flash header and nav buttons do not reload on every page. To review the pages so far; http://www.itrelocation.ca/MiniMe/index.html.
I thank you in advance. More detail concerning the fix is greatly appreciated.I think frames is the only choice you're gonna have.
I don't know of anything else that allows you to keep one thing loaded while changing other content except Flash itself. So the only other solution I know of would be to create the site entirely in Flash... no issues reloading anything there once the site is loaded.
Wait, there is another approach you could consider, using DHTML. It is a browser dependent approach. If you look at the source code of this page it uses that approach. The content that changes is written into javascript variables in the head section. I made this quite a few years ago for a client, but I haven't heard any complaints about it failing yet...
http://www.h-and-m-analytical.com/services.htm -
Issue with very basic php include
Hi there.
I am creating a site mainly in HTML, but with a file extension of .php due to me wanting to use a few php includes.
Most of my site files are in the root directly, and the includes I'm using are in an includes directory.
I have one or two pages that are in their own directory as well.
In my dreamweaver template file (that all of my pages use and are updated with), I have placed this:
<?php
include 'includes/social.inc';
?>
Now this works fine for all of the pages that are in the root directory, but for the ones in another directory, it doesn't.
So I tried the full address inside the quotes, but the include doesn't work at all with that.
Can anyone help me with this one... I'm sure its not too hard, just me being stupid.
Many thanks in advance,
CraigCraig,
I never use DW's template system for the very fact that you mention. It may be OK for small sites but becomes very combersome for larger sites.
You are already using SSI's. Why not have a template called index.php that include the files that are required.
For instance, If the About Us menu button is clicked, you include about.php; if the Contact Us button is clicked, you include contact.php.
To do this, you will need to include a URL parameter like ?page=about and use that parameter to choose the included file. There may be other ways to achieve the same, but the result will be much more satisfying than using DW's template system.
For a commercial solution, have a look here http://www.webassist.com/dreamweaver-extensions/framework-builder/
Gramps -
Converting Business Catalyst Site to Either a php include site, or wordpress cms
I have a relatively simple for a client that was developed using business catalyst. I orginally was hoping to move the site to our sever, but have since found out that you must use adobe to host your site when using muse as a development enviornment. I would like to host this site on my server and the most viable option I can see would be to convert the site to either wordpress or a php include site.
Can anyone help me with converting this site are there any tutorials or resouces that focus on migrating your catalyst site to another cms or server? Any help is appreciated, thanks.If it was built in muse it must be a simple enough site that you can just rebuild it in not much time.
If you're doing it in php i suggest using Twig for templating. -
I have a problem with a flash site I inherited. When I click
the back button in Internet Explorer it takes me all the the way
back to the Flash intro and not the last page I was in. This
appears to be a site issue problem it is not IE related. Any help
appreciated.Hi
The Browser cannot differeniate between so called 'Pages'
within a Flash site. To the browser your site is one page, when you
navigate thru your flash site it does not report 'Page'
changes to the Browser. However if your navigation changed html
'Pages' then it would work forwards and backwards.
To overcome this problem you have to put in your own 'Back' /
'Next' navigation within the flash site, recording any significant
page/content change and then allowing the user to decide their
direction using your controls.
Hope it helps -
Good Afternoon.
I am having a hard time trying to find what needs to be set to allow url
include statments in php on Netware 6.5 sp3, php5.
I know my code is correct after trying it on an external server, and it
seems all other php coding works. Just not the http includes as shown
below:
<?php
include ('http://your.website.here/filenamehere.php');
?>
php.ini is posted below:
[PHP]
; About php.ini ;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory. The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably
guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
; The value can be a string, a number, a PHP constant (e.g. E_ALL or
M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an
expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
; Expressions in the INI file are limited to bitwise operators and
parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
; An empty string can be denoted by simply not writing anything after the
equal
; sign, or by using the None keyword:
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend
extension),
; you may only use these constants *after* the line that loads the
extension.
; About this file ;
; This is the recommended, PHP 5-style version of the php.ini-dist file.
It
; sets some non standard settings, that make PHP more efficient, more
secure,
; and encourage cleaner coding.
; The price is that with these settings, PHP may be incompatible with some
; applications, and sometimes, more difficult to develop with. Using this
; file is warmly recommended for production sites. As all of the changes
from
; the standard settings are thoroughly documented, you can go over each
one,
; and decide whether you want to use it or not.
; For general information about the php.ini file, please consult the
php.ini-dist
; file, included in your PHP distribution.
; This file is different from the php.ini-dist file in the fact that it
features
; different values for several directives, in order to improve
performance, while
; possibly breaking compatibility with the standard out-of-the-box
behavior of
; PHP. Please make sure you read what's different, and modify your scripts
; accordingly, if you decide to use this file instead.
; - register_globals = Off [Security, Performance]
; Global variables are no longer registered for input data (POST, GET,
cookies,
; environment and other server variables). Instead of using $foo, you
must use
; you can use $_REQUEST["foo"] (includes any variable that arrives
through the
; request, namely, POST, GET and cookie variables), or use one of the
specific
; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"],
depending
; on where the input originates. Also, you can look at the
; import_request_variables() function.
; Note that register_globals is going to be depracated (i.e., turned
off by
; default) in the next version of PHP, because it often leads to
security bugs.
; Read http://php.net/manual/en/security.registerglobals.php for
further
; information.
; - register_long_arrays = Off [Performance]
; Disables registration of the older (and deprecated) long predefined
array
; variables ($HTTP_*_VARS). Instead, use the superglobals that were
; introduced in PHP 4.1.0
; - display_errors = Off [Security]
; With this directive set to off, errors that occur during the
execution of
; scripts will no longer be displayed as a part of the script output,
and thus,
; will no longer be exposed to remote users. With some errors, the
error message
; content may expose information about your script, web server, or
database
; server that may be exploitable for hacking. Production sites should
have this
; directive set to off.
; - log_errors = On [Security]
; This directive complements the above one. Any errors that occur
during the
; execution of your script will be logged (typically, to your server's
error log,
; but can be configured in several ways). Along with setting
display_errors to off,
; this setup gives you the ability to fully understand what may have
gone wrong,
; without exposing any sensitive information to remote users.
; - output_buffering = 4096 [Performance]
; Set a 4KB output buffer. Enabling output buffering typically
results in less
; writes, and sometimes less packets sent on the wire, which can often
lead to
; better performance. The gain this directive actually yields greatly
depends
; on which Web server you're working with, and what kind of scripts
you're using.
; - register_argc_argv = Off [Performance]
; Disables registration of the somewhat redundant $argv and $argc
global
; variables.
; - magic_quotes_gpc = off [Performance]
; Input data is no longer escaped with slashes so that it can be sent
into
; SQL databases without further manipulation. Instead, you should use
the
; function addslashes() on each input element you wish to send to a
database.
; - variables_order = "GPCS" [Performance]
; The environment variables are not hashed into the $_ENV. To access
; environment variables, you can use getenv() instead.
; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
; By default, PHP surpresses errors of type E_NOTICE. These error
messages
; are emitted for non-critical errors, but that could be a symptom of
a bigger
; problem. Most notably, this will cause error messages about the use
; of uninitialized variables to be displayed.
; - allow_call_time_pass_reference = Off [Code cleanliness]
; It's not possible to decide to force a variable to be passed by
reference
; when calling a function. The PHP 4 style to do this is by making the
; function require the relevant argument by reference.
; Language Options ;
; Enable the PHP scripting language engine under Apache.
engine = On
; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off
; Allow the <? tag. Otherwise, only <?php and <script> tags are
recognized.
; NOTE: Using short tags should be avoided when developing applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
; be sure not to use short tags.
short_open_tag = On
; Allow ASP-style <% %> tags.
asp_tags = Off
; The number of significant digits displayed in floating point numbers.
precision = 14
; Enforce year 2000 compliance (will cause problems with non-compliant
browsers)
y2k_compliance = On
; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit. You can enable output buffering during runtime by calling the
output
; buffering functions. You can also enable output buffering for all files
by
; setting this directive to On. If you wish to limit the size of the
buffer
; to a certain size - you can use a maximum number of bytes instead of
'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = 4096
; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using
ob_start().
; Using this ini directive may cause problems unless you know what
script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and
"zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
;output_handler =
; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off
; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =
; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling
the
; PHP function flush() after each and every call to print() or echo() and
each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = off
; The unserialize callback function will be called (with the undefined
class'
; name as parameter), if the unserializer finds an undefined class
; which should be instanciated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=
; When floats & doubles are serialized store serialize_precision
significant
; digits after the floating point. The default value ensures that when
floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100
; Whether to enable the ability to force arguments to be passed by
reference
; at function call time. This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend. The encouraged method of
; specifying which arguments should be passed by reference is in the
function
; declaration. You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each
time
; you use this feature, and the argument will be passed by value instead
of by
; reference).
allow_call_time_pass_reference = Off
; Safe Mode
safe_mode = off
; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off
; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =
; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir = "sys:/tmp"
; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe
Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_
; This directive contains a comma-delimited list of environment variables
that
; the end user won't be able to change using putenv(). These variables
will be
; protected even if safe_mode_allowed_env_vars is set to allow to change
them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH
; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; By default this is also set to "sys:/tmp". This is actually the value
that is
; set for the below mentioned "upload_tmp_dir" directive. If
"upload_tmp_dir" is
; changed, change the same for "open_basedir" also. This is done to allow
; phpMyAdmin application users to execute SQL commands through an SQL file.
open_basedir = ".;sys:/tmp"
; This directive allows you to disable certain functions for security
reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =
; This directive allows you to disable certain classes for security
reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_classes =
; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <font color="??????"> would work.
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000
; Misc
; Decides whether PHP may expose the fact that it is installed on the
server
; (e.g. by adding its signature to the Web server header). It is no
security
; threat in any way, but it makes it possible to determine whether you use
PHP
; on your server or not.
expose_php = On
; Resource Limits ;
max_execution_time = 30 ; Maximum execution time of each script, in
seconds
max_input_time = 60 ; Maximum amount of time each script may spend parsing
request data
memory_limit = 64M ; Maximum amount of memory a script may consume
(8MB)
; Error handling and logging ;
; error_reporting is a bit-field. Or each number up to get desired error
; reporting level
; E_ALL - All errors and warnings (doesn't include E_STRICT)
; E_ERROR - fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often
result
; from a bug in your code, but it's possible that it
was
; intentional (e.g., using an uninitialized variable
and
; relying on the fact it's automatically initialized
to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best
interoperability
; and forward compatibility of your code
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
; Examples:
; - Show all errors, except for notices and coding standards warnings
;error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT
; - Show all errors, except for notices
;error_reporting = E_ALL & ~E_NOTICE
; - Show only errors
;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
; - Show all errors
error_reporting = E_ALL
; Print out errors (as a part of the output). For production web sites,
; you're strongly encouraged to turn this feature off, and use error
logging
; instead (see below). Keeping display_errors enabled on a production web
site
; may reveal security information to end users, such as file paths on your
Web
; server, your database schema or other information.
display_errors = Off
; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed. It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off
; Log errors into a log file (server-specific log, stderr, or error_log
(below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = On
; Set maximum length of log_errors. In error_log information about the
source is
; added. The default is 1024 and 0 allows to not apply any maximum length
at all.
log_errors_max_len = 1024
; Do not log repeated messages. Repeated errors must occur in same file on
same
; line until ignore_repeated_source is set true.
ignore_repeated_errors = Off
; Ignore source of message when ignoring repeated messages. When this
setting
; is On you will not log errors with repeated messages from different
files or
; sourcelines.
ignore_repeated_source = Off
; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
report_memleaks = On
; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off
; Disable the inclusion of HTML tags in error messages.
; Note: Never use this feature for production boxes.
;html_errors = Off
; If html_errors is set On PHP produces clickable error messages that
direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from
http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used
including
; the dot.
; Note: Never use this feature for production boxes.
;docref_root = "/phpmanual/"
;docref_ext = .html
; String to output before an error message.
;error_prepend_string = "<font color=ff0000>"
; String to output after an error message.
;error_append_string = "</font>"
; Log errors to specified file.
error_log = "sys:/php5/error.log"
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog
; Data Handling ;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&"
; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"
; This directive describes the order in which PHP registers GET, POST,
Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC). Registration is done from left to right,
newer
; values override older values.
variables_order = "GPCS"
; Whether or not to register the EGPCS variables as global variables. You
may
; want to turn this off if you don't want to clutter your scripts' global
scope
; with user data. This makes most sense when coupled with track_vars - in
which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily
lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off
; Whether or not to register the old-style input arrays, HTTP_GET_VARS
; and friends. If you're not using them, it's recommended to turn them
off,
; for performance reasons.
register_long_arrays = On
; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information). If you don't use these variables,
you
; should turn it off for increased performance.
register_argc_argv = Off
; Maximum size of POST data that PHP will accept.
post_max_size = 8M
; Magic quotes
; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = off
; Magic quotes for runtime-generated data, e.g. data from SQL, from
exec(), etc.
magic_quotes_runtime = off
; Use Sybase-style magic quotes (escape ' with '' instead of ').
magic_quotes_sybase = Off
; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =
; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"
; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On
; Paths and Directories ;
; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
; Windows: "path1;path2"
;include_path = ".;c:phpincludes"
; NetWare
include_path = ".;sys:/php5/includes"
; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below.
doc_root =
; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =
; Directory in which the loadable extensions (modules) reside.
extension_dir = sys:/php5/ext
; Whether or not to enable the dl() function. The dl() function does NOT
work
; properly in multithreaded servers, such as IIS or Zeus, and is
automatically
; disabled on them.
enable_dl = On
; cgi.force_redirect is necessary to provide security running PHP as a CGI
under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
; cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache
or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name
that PHP
; will look for to know it is OK to continue execution. Setting this
variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; fastcgi.impersonate = 1;
; cgi.rfc2616_headers configuration option tells PHP what type of headers
to
; use when sending HTTP response code. If it's set 0 PHP sends Status:
header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0
; File Uploads ;
; Whether to allow HTTP file uploads.
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if
not
; specified).
upload_tmp_dir = sys:/tmp
; Maximum allowed size for uploaded files.
upload_max_filesize = 100M
; Fopen wrappers ;
; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On
; Define the anonymous ftp password (your email address)
;from="[email protected]"
; Define the User-Agent string
;user_agent="PHP"
; Default timeout for socket based streams (seconds)
default_socket_timeout = 60
; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; auto_detect_line_endings = Off
; Dynamic Extensions ;
; If you wish to have an extension loaded automatically, use the following
; syntax:
; extension=modulename.extension
; For example, on Windows:
; extension=msql.dll
; ... or under UNIX:
; extension=msql.so
; Note that it should be the name of the module only; no directory
information
; needs to go here. Specify the location of the extension with the
; extension_dir directive above.
;Windows Extensions
;Note that ODBC support is built in, so no dll is needed for it.
;extension=php_bz2.dll
;extension=php_cpdf.dll
;extension=php_curl.dll
;extension=php_dba.dll
;extension=php_dbase.dll
;extension=php_dbx.dll
;extension=php_exif.dll
;extension=php_fdf.dll
;extension=php_filepro.dll
;extension=php_gd2.dll
;extension=php_gettext.dll
;extension=php_ifx.dll
;extension=php_iisfunc.dll
;extension=php_imap.dll
;extension=php_interbase.dll
;extension=php_java.dll
;extension=php_ldap.dll
;extension=php_mbstring.dll
;extension=php_mcrypt.dll
;extension=php_mhash.dll
;extension=php_mime_magic.dll
;extension=php_ming.dll
;extension=php_mssql.dll
;extension=php_msql.dll
;extension=php_mysql.dll
;extension=php_oci8.dll
;extension=php_openssl.dll
;extension=php_oracle.dll
;extension=php_pdf.dll
;extension=php_pgsql.dll
;extension=php_shmop.dll
;extension=php_snmp.dll
;extension=php_sockets.dll
;extension=php_sybase_ct.dll
;extension=php_tidy.dll
;extension=php_w32api.dll
;extension=php_xmlrpc.dll
;extension=php_xsl.dll
;extension=php_yaz.dll
;extension=php_zip.dll
;NetWare Extensions
extension=php_ldap.nlm
extension=phpmysql.nlm
extension=php2ucs.nlm
extension=php_xml.nlm
extension=php_ossl.nlm
; Module Settings ;
[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling
define_syslog_variables().
define_syslog_variables = Off
[mail function]
; For Win32 only.
;SMTP =
;smtp_port = 25
; For Win32 only.
; sendmail_from =
; For Unix only. You may supply arguments as well (default: "sendmail -t
-i").
;sendmail_path =
; Force the addition of the specified parameters to be passed as extra
parameters
; to the sendmail binary. These parameters will always replace the value
of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =
[SQL]
sql.safe_mode = Off
[ODBC]
;odbc.default_db = Not yet implemented
;odbc.default_user = Not yet implemented
;odbc.default_pw = Not yet implemented
; Allow or prevent persistent links.
odbc.allow_persistent = On
; Check that a connection is still valid before reuse.
odbc.check_persistent = On
; Maximum number of persistent links. -1 means no limit.
odbc.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no
limit.
odbc.max_links = -1
; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
odbc.defaultlrl = 4096
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to
char.
; See the documentation on odbc_binmode and odbc_longreadlen for an
explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1
[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mysql.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no
limit.
mysql.max_links = -1
; Default port number for mysql_connect(). If unset, mysql_connect() will
use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only
look
; at MYSQL_PORT.
mysql.default_port =
; Default socket name for local MySQL connects. If empty, uses the
built-in
; MySQL defaults.
mysql.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =
; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo
get_cfg_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to
this
; file will be able to reveal the password as well.
mysql.default_password =
; Maximum time (in secondes) for connect timeout. -1 means no limit
mysql.connect_timeout = 60
; Trace mode. When trace_mode is active (=On), warnings for table/index
scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off
[MySQLI]
; Maximum number of links. -1 means no limit.
mysqli.max_links = -1
; Default port number for mysqli_connect(). If unset, mysqli_connect()
will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only
look
; at MYSQL_PORT.
mysqli.default_port = 3306
; Default socket name for local MySQL connects. If empty, uses the
built-in
; MySQL defaults.
mysqli.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysqli.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysqli.default_user =
; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo
get_cfg_var("mysqli.default_password")
; and reveal this password! And of course, any users with read access to
this
; file will be able to reveal the password as well.
mysqli.default_password =
; Allow or prevent reconnect
mysqli.reconnect = Off
[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
msql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
msql.max_links = -1
[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On
; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
pgsql.auto_reset_persistent = Off
; Maximum number of persistent links. -1 means no limit.
pgsql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
pgsql.max_links = -1
; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
pgsql.ignore_notice = 0
; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0
[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybase.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no
limit.
sybase.max_links = -1
;sybase.interface_file = "/usr/sybase/interfaces"
; Minimum error severity to display.
sybase.min_error_severity = 10
; Minimum message severity to display.
sybase.min_message_severity = 10
; Compatability mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results
according
; to their Sybase type, instead of treating them all as strings. This
; compatability mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off
[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybct.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no
limit.
sybct.max_links = -1
; Minimum server message severity to display.
sybct.min_server_severity = 10
; Minimum client message severity to display.
sybct.min_client_severity = 10
[dbx]
; returned column names can be converted for compatibility reasons
; possible values for dbx.colnames_case are
; "unchanged" (default, if not set)
; "lowercase"
; "uppercase"
; the recommended default is either upper- or lowercase, but
; unchanged is currently set for backwards compatibility
dbx.colnames_case = "lowercase"
[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0
[browscap]
;browscap = extra/browscap.ini
[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =
; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =
; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =
; Allow or prevent persistent links.
ifx.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ifx.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no
limit.
ifx.max_links = -1
; If on, select statements return the contents of a text blob instead of
its id.
ifx.textasvarchar = 0
; If on, select statements return the contents of a byte blob instead of
its id.
ifx.byteasvarchar = 0
; Trailing blanks are stripped from fixed-length char columns. May help
the
; life of Informix SE users.
ifx.charasvarchar = 0
; If on, the contents of text and byte blobs are dumped to a file instead
of
; keeping them in memory.
ifx.blobinfile = 0
; NULL's are returned as empty strings, unless this is set to 1. In that
case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0
[Session]
; Handler used to store/retrieve data.
session.save_handler = files
; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
; As of PHP 4.0.1, you can define the path as:
; session.save_path = "N;/path"
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
; The file storage module creates files using mode 600 by default.
; You can change that by using
; session.save_path = "N;MODE;/path"
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
;session.save_path = "/tmp"
session.save_path = sys:/php5/sessiondata
; Whether to use cookies.
session.use_cookies = 1
; This option enables administrators to make their users invulnerable to
; attacks which involve passing session ids in URLs; defaults to 0.
; session.use_only_cookies = 1
; Name of the session (used as cookie name).
session.name = PHPSESSID
; Initialize session on request startup.
session.auto_start = 0
; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0
; The path for which the cookie is valid.
session.cookie_path = /
; The domain for which the cookie is valid.
session.cookie_domain =
; Handler used to serialize data. php is the standard serializer of PHP.
session.serialize_handler = php
; Define the probability that the 'garbage collection' process is started
; on every session initialization.
; The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts
; on each request.
session.gc_probability = 1
session.gc_divisor = 1000
; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440
; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other
method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm
; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, albeit
register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled.
session.bug_compat_42 = 0
session.bug_compat_warn = 0
; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =
; How many bytes to read from the file.
session.entropy_length = 0
; Specified here to create the session id.
session.entropy_file =
;session.entropy_length = 16
;session.entropy_file = /dev/urandom
; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter = nocache
; Document expires after n minutes.
session.cache_expire = 180
; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publically accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
session.use_trans_sid = 0
; Select a hash function
; 0: MD5 (128 bits)
; 1: SHA-1 (160 bits)
session.hash_function = 0
; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 5
; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeent ry"
[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1
; Minimum error severity to display.
mssql.min_error_severity = 10
; Minimum message severity to display.
mssql.min_message_severity = 10
; Compatability mode with old versions of PHP 3.0.
mssql.compatability_mode = Off
; Connect timeout
;mssql.connect_timeout = 5
; Query timeout
;mssql.timeout = 60
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096
; Limits the number of records in each batch. 0 = all records in one
batch.
;mssql.batchsize = 0
; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On
; Use NT authentication when connecting to the server
mssql.secure_connection = Off
; Specify max number of processes. Default = 25
;mssql.max_procs = 25
[Assertion]
; Assert(expr); active by default.
;assert.active = On
; Issue a PHP warning for each failed assertion.
;assert.warning = On
; Don't bail out by default.
;assert.bail = Off
; User-function to be called if an assertion fails.
;assert.callback = 0
; Eval the expression with current error_reporting(). Set to true if you
want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0
[Ingres II]
; Allow or prevent persistent links.
ingres.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ingres.max_persistent = -1
; Maximum number of links, including persistents. -1 means no limit.
ingres.max_links = -1
; Default database (format: [node_id::]dbname[/srv_class]).
ingres.default_database =
; Default user.
ingres.default_user =
; Default password.
ingres.default_password =
[Verisign Payflow Pro]
; Default Payflow Pro server.
pfpro.defaulthost = "test-payflow.verisign.com"
; Default port to connect to.
pfpro.defaultport = 443
; Default timeout in seconds.
pfpro.defaulttimeout = 30
; Default proxy IP address (if required).
;pfpro.proxyaddress =
; Default proxy port.
;pfpro.proxyport =
; Default proxy logon.
;pfpro.proxylogon =
; Default proxy password.
;pfpro.proxypassword =
[Sockets]
; Use the system read() function instead of the php_read() wrapper.
sockets.use_system_read = On
[com]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constat registrations
;com.autoregister_verbose = true
[LDAP]
; Path to a directory which contains SSL certificates to be used for LDAP
over SSL
; Terminate the path with /
ldap.ssl_cert_dir = "sys:/php5/cert/"
[mbstring]
; language for internal character representation.
;mbstring.language = Japanese
; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP
; http input encoding.
;mbstring.http_input = auto
; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS
; enable automatic encoding translation accoding to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
;mbstring.encoding_translation = Off
; automatic encoding detection order.
; auto means
;mbstring.detect_order = auto
; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character = none;
; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload = 0
[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128
;fbsql.batchSize = 1000
[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as
JIS.
; With mbstring support this will automatically be converted into the
encoding
; given by corresponding encode setting. When empty
mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola
and
; intel byte order. A decode setting cannot be empty.
;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS
;exif.decode_jis_intel = JIS
[Tidy]
; The path to a default tidy configuration file to use when using tidy
;tidy.default_config = /usr/local/lib/php/default.tcfg
; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
tidy.clean_output = Off
[soap]
; Enables or disables WSDL caching feature.
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.
soap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file will be used
; instead of original one.
soap.wsdl_cache_ttl=86400
; Local Variables:
; tab-width: 4
; End:
[Imagemagick Extension - Added By GKO - 08.01.05]
extension=php_imagick.nlm
Thank you for any insight you can give ... I am not a php person.
TonyTony,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Error message when trying to open PHP include?
Hi there,
I have seen a number of posts here about issues with
Contribute editing PHP pages and am starting to get concerned... I
have another one to add to the list.
I have created a site that uses PHP includes for the header
and the drop down menus, so that the client can go in and edit one
or two files to change things sitewide. Sounds good, right? Well,
in Contribute I can't open either of the PHP files that are being
included to edit them. I keep getting errors and whether I click on
"YES" or "NO" (to the question of whether I want to continue
running scripts on the page) it doesn't let me out...the error
warning box keeps popping up and I am in an endless loop. The only
way out is CTRL-ALT-DELETE.
One guess I had is that I am maybe missing something
important in the included PHP file that is necessary for it to be
recognized as a proper PHP file? In other words, the included PHP
files contain no header tags or anything like that, it is literally
just some divs that are supposed to be inserted at a particular
point on every page. Am I missing something, or am I encountering a
limitation of Contribute?
Many thanks!!
TimI think it's the content of the include that is causing your
troubles. Somehow you created a menu using Fireworks(?) or
Dreamweaver(?) and Contribute indicates javascripterrors, not php
errors...
Maybe its better, in this case, constructing a menu that
contains only an unordered list (check out project7 menus, or stu
nichols css site for more examples). Updating the menu will be
simpeler and also with less chance of errors by users. You can open
such a file without any troubles in Contribute. -
Problems using a php include file with an Add-on Domain.
Hello,
I am having an issue getting a php include file to work with a new add-on domain I am working on getting up and running.
This include file is one that supplies the rest of the php code to a contact form page. It works as it should for my original domain, same file no difference. I made sure that the files hosted on the remote server had all read, write, execute permissions turned on.
I have tried putting the include file in several different locations as a test, such as:
I don't remember the exact name of the include file at the moment, as I'm at work so I will designate it below as 'includefile.php'.
file path for add-on domain - ../public_html/lorentzpainting/includes/includefile.php
alternatives I tried moving the file to - ../public_html/lorentzpainting/includefile.php
When none of those options worked, I tried just pointing the path towards other places on the server that have the include file such as:
../public_html/includes/includefile.php
../public_html/includefile.php
What can I do here? Should I just give up on using the include and put all the code back in the page? Doesn't seem like it should be this complicated, it works perfectly fine for my other site.. and still does.
Thanks ahead of time to those who may assist me.here is the contents of the include file:
<?php
if (isset($_SERVER['SCRIPT_NAME']) && strpos($_SERVER['SCRIPT_NAME'],
'.inc.php')) exit;
// remove escape characters from POST array
if (PHP_VERSION < 6 && get_magic_quotes_gpc()) {
function stripslashes_deep($value) {
$value = is_array($value) ? array_map('stripslashes_deep', $value) : stripslashes($value);
return $value;
$_POST = array_map('stripslashes_deep', $_POST);
// assume that there is nothing suspect
$suspect = false;
// create a pattern to locate suspect phrases
$pattern = '/Content-Type:|Bcc:|Cc:/i';
// function to check for suspect phrases
function isSuspect($val, $pattern, &$suspect) {
// if the variable is an array, loop through each element
// and pass it recursively back to the same function
if (is_array($val)) {
foreach ($val as $item) {
isSuspect($item, $pattern, $suspect);
else {
// if one of the suspect phrases is found, set Boolean to true
if (preg_match($pattern, $val)) {
$suspect = true;
//check the $_POST array and any subarrays for suspect content
isSuspect($_POST, $pattern, $suspect);
if (!empty($_POST['url'])) {
$suspect = true;
if ($suspect) {
$mailSent = false;
unset($missing);
} else {
//process the $_POST variables
foreach ($_POST as $key => $value) {
// assign to temporary variable and strip whitespace if not an array
$temp = is_array($value) ? $value : trim($value);
// if empty and required, add to $missing array
if (empty($temp) && in_array($key, $required)) {
array_push($missing, $key);
} elseif (in_array($key, $expected)) {
// otherwise, assign to a variable of the same name as $key
${$key} = $temp;
//validate the email address
if (!empty($email)) {
// regex to identify illegal characters in email address
$checkEmail = '/^[^@]+@[^\s\r\n\'";,@%]+$/';
//reject the email address if it doesn't match
if (!preg_match($checkEmail, $email)) {
$suspect = true;
$mailSent = false;
unset($missing);
//go ahead only if all required fields OK
if (!$suspect && empty($missing)) {
//initialize the $message variable
$message = '';
// loop through the $expected array
foreach($expected as $item) {
// assign the value of the current item to $val
if (isset(${$item}) && !empty(${$item})) {
$val = ${$item};
} else {
// if it has no value, assign 'Not selected'
$val = 'Not selected';
// if an array, expand as comma-sparated string
if (is_array($val)) {
$val = implode(',', $val);
// add label and value to the message body
$message .= ucfirst($item).": $val\r\n\r\n";
//limit line length to 70 characters
$message = wordwrap($message, 70);
//create Reply-To header
if (!empty($email)) {
$headers .= "\r\nReply-To: $email";
// send it
$mailSent = mail($to, $subject, $message, $headers);
if ($mailSent) {
// $missing is no longer needed if the email is sent, so unset it
unset($missing); echo('Thank you for contacting Common Wealth Web Solutions');
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
</head>
<body>
</body>
</html> -
PHP page looks fine by itself, but CSS Divs fall apart on PHP include
Hi everyone. Thanks for your help in advance, this problem I'm having really has me puzzled.
The issue I'm having is, I have two php files. body.php with content to be included and index-3.php as the container. When I load body.php by itself in the browser, the layout looks fine. When I load the index-3.php file that uses the php include function to load body.php through itself, some of the divs in the body.php file come apart.
I'm old hat at building pages with tables and Iframes, but very new at using divs and php.
Here are the two files, so you can see for yourselves:
http://www.hitn.tv/index-3.php (the container)
http://www.hitn.tv/body.php (the included)
Is this a CSS issue, or a php issue?
The index:
The Body:
Content on this page requires a newer version of Adobe Flash Player.
Temas de interés para la
comunidad hispana Hoy
debatiremos un interesante
asunto que afecta a nuestra
comunidad
7/27 - Venezuela en la mira
por tráfico de drogas
7/27 - Venezuela en la mira
por tráfico de drogas
7/27 - Venezuela en la mira
por tráfico de drogas
7/27 - Venezuela en la mira
por tráfico de drogas
7/27 - Venezuela en la mira
por tráfico de drogas
7/27 - Venezuela en la mira
por tráfico de drogas
The Stylesheet:
@charset "utf-8"; body { background-image: url(images/background.jpg); background-attachment: fixed; background-color: #FFE2BA; background-repeat: repeat-x; text-align: center; } .containerdiv { width: 953px; margin-left: auto; margin-right: auto; } .boxtext { font-size: 11px; color: #000; font-family: Arial, Helvetica, sans-serif; font-weight: normal; font-style: normal; line-height: normal; text-align: center; } .rightside { width:762px; height:584px; float: left; overflow: hidden; } .sidebar { } .lowerbar { } #mainsitedivcontainer { width: 762px; } .latestvideos { width: 699px; height: 61px; margin-bottom: 5px; margin-top: 0px; margin-right: 0px; margin-left: 0px; } #leftbookend { float: left; } #rightbookend { float: right; width: 31px; height: 142px; } #videobox { float: left; width: 550px; } #mainsitevideotextblock { float: right; width: 212px; } #mainsitevideotextblock { background-color: #F4F4F4; height: 420px; } .videothumbnaildivframe { height: 61px; width: 82px; overflow: hidden; float: left; } .videotextboxdescription { height: 61px; width: 151px; overflow: hidden; float: right; background-color: #FFF; border-top-width: 0px; border-right-width: 3px; border-bottom-width: 0px; border-left-width: 3px; border-top-style: none; border-right-style: solid; border-bottom-style: none; border-left-style: solid; border-right-color: #D4D4D4; border-left-color: #D4D4D4; text-align: center; } .picdivleft { float: left; height: 61px; width: 233px; } .picdivright { float: right; height: 61px; width: 151px; } .picthenvid { height: 61px; width: 233px; } .centerboxdiv { width: 233px; height: 61px; float: left; } #doubemenucontainer { height: 122px; width: 699px; float: left; } #middlebar { height: 15px; width: 762px; clear: left; } .boxtext { font-size: 11px; color: #000; font-family: Arial, Helvetica, sans-serif; font-weight: normal; font-style: normal; line-height: normal; } #finalvideowrap { height: 142px; width: 762px; background-color: #D4D4D4; overflow: hidden; }
Any help at all is much appreciated!
Thanks so much,
EvanHi there, and welcome to the forums!
Could you please provide a screenshot of the website when it is previewed in a browser/live view? This way I can better understand the conflicts that are occuring in your code.
It is always a good practice when coding a website to preview it in the browser as you code, to make sure there are no conflicts. It's important to remember that in the end, your viewers will be viewing your site in a browser, not in Dreamweaver's preview. : )
Maybe you are looking for
-
Urgent: Displaying image in Abstract Portal Component.
Hi all, In my application form, i am displaying a logo. I saved that logo under /dist/images. and in my form, i am giving the path as src = "/images/logo.jpg". But image is not displaying. Can anyone quickly help me to solve this.
-
I bought the HP 6624y desktop computer with an integrated ATI radeon HD 4200 video card. I bought a new video card recently....XFX ATI radeon HD 5670 for gaming purposes. I did exactly what you're supposed to do to install a new video card i.e. chang
-
Note: by clone I refer to sharing packages over a network from a number of ad-hoc machines, this is not actually functionally compatible with Xyne's pkgD and other tools Hi all, I have written a Package Daemon "clone" in ruby. It relies on having ava
-
Hello. I have a HP ENVY 17-j130ea. When I first got it, the first thing I done was create recovery disks for it to put in the box so if I need to recover it, I had the discs to do so. Anyway, before completely setting it up I decided to run the recov
-
JSTL = Problem in connecting to MS SQL Server 2005
hi....i really need some help here I am having touble in connecting MS SQL 2005 using odbc driver. The code is as below, <sql:setDataSource var="datasource" driver="sun.jdbc.odbc.JdbcOdbcDriver" url="jdbc:odbc:eleavedao" user="" password=""/> <sql:qu