Flash IDE, opaque white screen from inside a graphic object

I'm sorry if this has been answered, I couldn't find anything about it.
When I'm editing a graphic object on the stage (not from the library) everything else is under this opaque white screen so I can't see their true color.
Is there a way to disable it?
Thanks.

No. It's a convenience feature to help you retain alignment and get sort of an onion skin idea of where you are.
Tou can always take a screenshot and put it in a locked background layer under your clip of your content to simulate the full color. It's all about how complex you need it to be.
If the background is animated then the good old way is the only way. Copy the frames from inside the clip (hopefully not to complex), make a new layer in the content you want to edit it in with full color, paste frames, make changes, then copy it back into your previous MovieClip.
I myself always desire that semi-transparent white to make the clips contents obvious but I have wanted to disable that before to ink dropper select some colors.

Similar Messages

Nano 6th generation - flashing and flickering white screen loop

I have an issue that does not seem to be exactly answered anywhere.
1. The screen was bad and was not responsive when unplugged from the computer. Black screen, no nothing.
2. When connected to the computer it would show up in iTunes, however the screen would go to a white screen for 3 seconds then go out, then you would get about a minute of very faint flickers then back to a white screen for 3 seconds. This would continue indefinately (Let it go for 2 hours).
3. Even though it was like this I was able to upgrade the iOS and register it and so on.
4. Figuring it was the screen I purchased a new one and replaced it. While replacing it I was able to see the screen and flip through it and so on. At this point it was working although the battery had almost zero power.
5. Finished reassembly, plugged it in the computer. It is now not recognized by itunes and is in the infinate loop of flashes and flickers.
6. When not connected to the computer there is nothing just black.
7 It also does the flashing and flickering when plugged into the wall.
8. I did go back and carefully disconnected all connectors and reconnected them all as I saw this as a solution in a post. Still flashes and flickers when plugged in.
9 None of the reset procedures do anything.
Ok all you experts what is the issue? It is very frustrating especially since it was working.

same problem as mine, don't know what to do either, when you find out please post.
thanks!

Did anyone else see an Arabic caricature after the IOS update flash on the white screen either before or after the "hello".

Did anyone else see an Arabic caricature flash briefly when the white screen appeared? I don't know for sure if it was before or after the "hello" greeting.

If you leave it alone, it goes through several languages in a loop.
It's character, not caricature.

White screen from sleep after 3.1.2 update

I just updated my Ipod touch G2 to 3.1.2. It had worked flawless for over a year until now.
Immediately after the update this problem started.
When turning on from sleep mode the screen is white. If I “swipe” the white screen to access the desktop I hear the sound so I am sure it is working behind the white screen.
If I hold the power button to turn it off then restart it with the power button it starts with the normal desktop and everything works. I have hard booted many times and restored 3 times and this problem still exists.

With all my online resources used up with no success, I made an appointment with the closest Genius Bar at the Apple store.
I took the touch in powered off and asked the genius to turn it on, without telling him the problem other than "white screen". It powered up and he swiped the screen and the icons appeared as it should. He asked me what was the problem. I said to put it to sleep and then back on, he did and got the white screen and could not get rid of it without rebooting. After some research on his laptop and a bit of playing with the touch he said he would replace it FREE of charge even though it was out of warranty.
I brought the new touch home and connected it to ITunes on the same computer I used before and updated the software to 3.1.3 and added all my music and apps. It has worked fine since so I am sure the original touch had a problem that was not related to anything I did or a problem in my computer.
I applaud Apple "real" people for standing behind their product and replacing it. Unfortunately SHAME on their tech support for not offering any usefull help other than in the end after three different support people suggesting the genious bar.
Case closed!

How do I remove blank white screen from my ipod touch?

help! my iPod is stuck on a white screen and holding any button down is not helping. I'm thinking of leaving it overnight and waiting if it is fixed in the morning. Is this a good idea or is there a better method/solution for troubleshooting iPod Touch.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Flash Only Rendering White Screen

Myself and a few of my classmates are running into a similar problem in CS5. When I export my file as a Quicktime movie, or even attempt to test the scene, the first half appears as just a plain, white screen. The whole thing works fine in the timeline, however. Is this some sort of bug, or is there any possible way I might be able to fix this? My classmates and I would really appreciate your help on this one.

I have the same issue with flash on firefox. The answers are inline
BWolfe [ADOBE] wrote:
Don't do any registry poking. I had a chat with the installer engineer and he had some followup questions:
1. Is the entire screen white or just the region where the Flash content is supposed to display?
Only flash region
2. What happens when they right click on the region where the Flash content should be?
Nothing Comes up
3. What are the security settings on the Windows\system32\Macromed\Flash directory (right click on the Flash directory->security tab). We’ll need each group/user in the security tab and the permissions for each.
I have permissions for each
4. Which version of Windows?
Windows XP Pofessional
5. Which version of Firefox?
Firefox 3.6.3
6. Does the following file exist?
Windows\system32\Macromed\Flash\NPSWF32.dll
Yes
7. Does Flash content play back using Internet Explorer?
Yes
Let's get that information before we decide how to proceed..
Is there anything I am missing here...

My apple mac's screen is black, when i try to turn it back on then off again it flashs with a white screen then goes back to black. It's as if it thinks when the screen is open it is closed and when it's closed it's open, can anyone help me!!!

When i open my laptop the screen just stays black, i have tried turning it on an back on and it will turn on to the loading white screen and then turn back to black. i have tried calling apple but there tech support is closed on a sunday here in australia. If anyone knows anything i can do please let me know!!!

Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller
-- Those links are currently down for maintenance but should available shortly.

White screen from external drive?

I'm having the white screen issue and I think I've narrowed it down to my external drive as the problem. When I unplug and go through restart process, start up is fine. How do I resolve this issue and make my mac and drive work in perfect harmony once again? Thanks, John

Your profile says you are running OS 10.6.6. If so, you have an Intel iMac and should probably post in the Intel iMac forums here:
http://discussions.apple.com/category.jspa?categoryID=189
If the Mac in question is not the one in your profile and looks like this:
!http://images.apple.com/support/images/heroimacG4.jpg!
then you are in the correct forum area.

Link flashes by leaving white screen, refresh shows screen is

I have a problem on my new iMac duo core 25" (60days old), BUT NOT on my iMac 27" i5,(6mths old)
that when I load certain sites, it flashes by leaving a clear screen. Refresh repeats same,
reLoaded 10. and updates last night (9/12/10), deleted cookies for this site, reset safari,
website is a sign-on screen for job opportunities, needed for wife to gain employment.
http://www.linkedin.com/mbox?displayMBoxItem=&itemID=I846626304_3
Message was edited by: Wayne Lester

Hello Wayne:
No help to you, but that link results in the sign on screen.
You have already done what I would have suggested….
A couple of random thoughts…
Be sure you have deleted all the site cookies.
Clear the cache again.
Trash a preference file (com.apple.safari.plist) and restart. You will need to reenter your personal preferences.
If none of that helps, the only thing I can think of that would be left would be to reinstall OS X 10.6 (over your existing installation) and then run software update. That, however, would be time consuming.
As always, I suggest backing up before any software changes.
Barry

My computer starts turning on with a black screen and the sleep light flashes, then the old screen from when my battery died shows up behind like a blue screen, then it dies again and wont restart? And yes my computer is fully charged now, HELP!

So the problem now is in the question, but just before this problem the initial issue was my computer would start and turn on but the backlight appeared to be on its dimmest setting I could barely make out icons and the last page I viewed. Please help I'm in college and did not back up everything plus I desparately need my microsoft office for these classes! Thank you!!!

Hi kmdmsu08,
If your computer's not turning completely on, I would try the steps in this article, especially step 4:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Take care!
- Ari

HOW 2 REMOVE WHITE BACKGROUND FROM JPG OR GRAPHIC?

I am trying to "knock out" the white background on some logo art that I am using on title pages. The logo art was supplied to me in both PSD and JPG format. I can certainly use photoshop to remove the white and save in layers, but when I import and place, the white comes back. Thanks in advance!

You need to save the PSD as a TIFF file or PNG with transparency enabled.
Simple way: separate your logo and background in Photoshop.
Make sure that the unprotected area is your logo. Press command C to copy.
Go to File > New > Film and Video Presets. Choose one that matches the pixel dimensions of your project. Make sure that Background color is set to Transparent. Click OK.
Paste your graphic (command V) into the transparent template. Save as above.

Did you know you needed to clean your monitor from inside every 30 days??

Did you know that every 30 days it is necessary to clean the computer monitor from the inside?
Many people ignore this fact and do not know how.
Manufacturers take advantage of this ignorance to increase their sales
click this link to learn an easy way to do so:
Clean your computer screen from inside - ehow

Below is the existing Setup:Configured File and Print Servers (Windows Server 2008R2Standard Sp1 - Physical) in 5 Branch locations.Server Names: AFS1, BFS2, CFS3, DFS4, EFS5.No backups configured for the Branch Location file servers,instead configured a DFSR replication to Central Hub Servers (Windows Server2008R2 Standard Sp1 - VMs). This hub servers are two and configured withFailover Clustering file Servers and attached 20 TB Storage.Users will access the data directly on the Branch locationFile Servers and will do the modifications, these branch File server's datawill be replicating to Central Hub Clustered servers using the DFSR Replicationafter the business hours. Backup will be performed on Hub Servers on daily basis usingthe backup tool called EMC Networker. The idea behind, in case of data deleted or file servercrashed in the...

One Twitter feed causes white screen of death on iPad Air

II have a problem viewing ANY tweet from @NRO or @NROcorner. Whenever I click on a link in either of these tweets, within 10 seconds the screen clears so all I see is the white screen of death.
ANy idea what causes this?
note, this is on an iPad air that was just updated to IOS 8.1.3

When I connect it the computer doesn't even recognize it now. I tried DFU mode but it just goes straight to the white screen from the apple logo. Apple logo is only up for maybe 3-5 seconds max. I tried to put it into DFU mode but it won't go :-/. It's looking like I'll be making a trip to the apple store. When I went to update it said it worked and was rebooting but when it rebooted it gave me the tether logo on the screen saying to connect to itunes. So I did that and it looped like this like 4 or 5 times and then just went white screen on me :-/

Mac wont boot, stuck on white screen

Hi
After doing a software update and restart, my iMac wont boot. It will chime on, Grey screen w/ apple logo, then flashes to a white screen with a larger loading dial. It will keep doing this over and over, never actually getting to the login screen.
Have done safe mode start-up, tried repairing disks, and reinstalling OSX, which it won't let me do.
Not a computer expert so wondering if there are any more things I can try before taking it into get repaired?
Thanks ahead of time!

Try booting from the install disc. A quick search should pull up the precise method for your particular iMac. If this started happening after and update, then it is likely something corrupted in your system software that may be an easy fix. Do you have an external backup drive you could boot from?

Blackberry bold 9700 dead with white screen need help

My bold 9700 is showing white screen from last night. I am able to get calls but screen is completely white. I did reboot, battery pull out, connected to desktop software. Previous version of software was os6 downgrade to os5 nothing happens. Restore and all but nothing works. Please help me out.

Try the steps here:
http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Flash IDE, opaque white screen from inside a graphic object

Similar Messages

Maybe you are looking for