Flash IDE unable to draw pure black line with zero alpha

As Title
Use line or pancil tool in Flash CS 5.0 or 5.5.
Choose pure black color #000000 and zero alpha.
Try to draw line on the tage.
result : stage is empty

can u tell me what u are trying to achieve? this is very criptic

Similar Messages

  • I did a hard reset on my iphone 5.  When it was resetting  black lines with text saying there were errors popped up at the top of the screen. any ideas??

    I did a hard reset on my Iphone 5,  when it was resetting black lines with white text popped up at the top of the screen.  Last line says _fetchBorrowedList:881 number of borrowed blocks 16.  It is stuck at this point and will do nothing.  Tried another hard reset and the same thing happened.  Any Ideas??

    Make an appointment at the genius bar and get the screen replaced if that's available in your area ($149) or get the phone replaced if it's not or if the damage is more extensive ($269).

  • How can i draw a straight line with a brush?

    i know the pencil tool can draw a straight line with anchor points. is there a setting for the pencil tool that can mimic a 30 point brush, low hardness (faded side to side) at about an 80 degree angle or is there a way to make a straight line with the brush tool using a mouse?
    i know this image is a bit blurry. what i want to do is replace the 2 white angled lines with the 30 point brush effect 230 pixels wide. the project on the left of the pic is a 2ft by 4ft canvas. any ideas? please help.

    Hello Mike, I wonder if you can help, no one else can. I asked this question on the forum in August Brush line fades on start with anchor points
    Only on Photoshop CC does this happen, drawing a diagonal line with shift key, instead of line starting dark & then fading out, it does the reverse, starts on nothing & then darkens towards anchor point. I am on trial versions & can't purchase until this is cleared up.

  • My ipad mini is cracked in the bottom left corner of the screen and their is a thick black line with smaller coloured lines within it, is their anything I can do to fix it?

    My ipad mini is cracked in the bottom left corner of the screen and their is a thick black line with smaller coloured lines within it, is their anything I can do to fix it?

    Does this only happen on specific pages?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can try to disable notifications as a test (you may want to reverse this).
    You can try to set the dom.webnotifications.enabled pref to false on the <b>about:config</b> page.
    *http://kb.mozillazine.org/about:config

  • How much will it cost to get the screen fixed on an ipad. theres no crack, its just a big black line with small colored lines.

    how much will it cost to get the screen fixed on an ipad. theres no crack, its just a big black line with small colored lines.

    If it's not considered to be within warranty, then the cost (from http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad for USA) will be :
    iPad Wi-Fi
    iPad 2 Wi-Fi
    Out-of-Warranty Service Fee
    16 GB
    $269
    32 GB
    $299
    64 GB
    $349
    iPad Wi-Fi
    iPad 2 Wi-Fi
    Out-of-Warranty Service Fee
    16 GB
    $319
    32 GB
    $369
    64 GB
    $419

  • My Firefox browser has a pure black line running through my Firefox persona. How do I get rid of it?

    It's hard to explain. On the top of the browser, where my persona is, there's this pure black, centimeter thick line. It's not transparent, it's solid. It has been there since I downloaded Firefox a couple monthes ago in February. I thought that maybe it would have gone away by now, but I don't know what's causing it in the first place.

    jessejarvi wrote:
    Hi sbla, seems like you are having some kind of plugin or even a virus that opens those popups. Please try to disable all your Firefox plugins and if that doesn't help, run a virus scan.
    Do you know of a Mac virus that pops up a dialog in FireFox, I don't, can you tell us what it may be?
    There are no Mac viruses, this may be a plugin but they get there because they are installed by the user.

  • Vertical black line with shade dots down left side of page - NEW Cartridge

    I installed a NEW cartridge and was able to print about 30 pages before the paper began having a 1/16" black stripe with shade(?) dots down the left side.  Could someone please advise.
    Thank you,
    Erin

    Thanks.
    I am very new to Pages. Yesterday I decided to go after a "Brochure" template, as it already had at least one vertical line separating text passages on the left and right. But there were too many sections, so I went about deleting all the extraneous, unwanted lines. And also the unwanted horizontal lines. To do this, you have to click the line itself to discover where the "nodes" are. But the nodes are locked, so you have to go to the top control bar of the desktop. (I think that this is the option titled "arrange").
    It appears that the secret to tinkering with the lines in the templates, is by unlocking the nodes to the lines, dragging them around, and then locking them in place again, saving them between major changes. In any case, none of this is going to be intuitive to users who come to the Mac from a text based 'DOS' universe. (I have absolutely no experience with Microsoft products, and would be lost if somebody asked me to do this from Windows.)
    Now, I think I am going in the right direction, and I appreciate your help, but I'm still having a little difficulty switching back and forth from editing templates, and typing text in. What are the sequences of keypresses for going back and forth from editing the templates, and typing the text in?

  • Hi!I have an image which is a drawing of black lines and i need to put it over a picture without loosing definition in both of them,like the drawing and the picture are one.How can i do that?can someone help me please?I do work with CS6.Thanks!

    Photoshop General Discussion

    Why has nobody suggested the "Blend If" solution yet?
    - double-click on the layer thumbnail of the dragon line art
    - Hold down <Alt> and drag the left half of the "This Layer" slider to the left, and the right slider as well, but not as much for a nicer blending.
    Done. The only trouble is that you cannot add (for example) a color overlay effect to recolour the lines directly because this layer is not considered truly transparent by Photoshop (in Photoline this is not an issue luckily). In Photoshop's case you will have to merge it to a new layer, and only then does Photoshop treat the transparent pixels as "real" transparent ones. Some tips to do that can be found here: Create A Composite Layer | Planet Photoshop
    Alternatively, convert the layer to a smart object, and you can apply layer effects and the like without issues. I would choose the latter option, since it is non-destructive.
    This method, however, does not take the pre-multiplied edge pixels into account (which are multiplied with white), and thus you lose those pixels. This may be an undesired side effect, especially for more delicate art work. A better approach is to use an "unmultiply" effect.
    In Photoline a non-destructive adjustment layer will allow us to do exactly this with any background colour, and with additional controls as well. Unfortunately, such a filter is unavailable in Photoshop. Luckily enough an action for Photoshop is available: http://www.ayatoweb.com/download/down04.html
    - download the action (zip file) and load up the actions in Photoshop (I have no idea if this action still works in CC and above - I own a license of CS6 only).
    - since this will unmultiply BLACK, you must first invert the artwork with <CTRL> <i>.
    - run the action "unmultiply English".
    - The black background is removed, and you now invert the artwork back to its original black.
    Done! Notice how all of the original edge pixels remained unaffected. Those are now truly semi-transparent, and blend nicely with the background layer(s). A bit of a shame this is a destructive workflow, but the result is great.

  • Straight black line with no gray shade

    Greetings,
    Each time a make a 6px black horizontal line I notice that there is a gray "shadow" on top and below the black "core", how do I remove this gray component.
    Also, I noticed that this line has square ends. Is there a way to make them rounded?
    I'm using CS5 for mac.
    Thanks in advance.
    Best, 

    Which tool are you using to draw the line? You are seeing the antialiasing. A nice hard line can be obtained by stroking a path with the Pencil tool, but rounded ends would have the jaggies that way.

  • How can I easily change black line art to a colour?  (Or color?)

    I have line art on a transparent layer.  That is, it's not part of a white layer, but just black on nothing.  I want to easily change that to a colour without changing the quality of the line.  I know I can put a screen layer above it with a colour and that makes the black coloured, but it only shows up if I flatten it on to white.  Otherwise, that's exactly the look I want, just not on a flattened white layer.  I need to keep the line on the transparent layer so that I can paint under it, so I can't flatten it on to white.   I also don't want to select the line and fill it as that significantly changes the quality of the line.  I just want to change the colour of the line without chaning it's density, or any pixels.  Any idea how to do this?

    I believe your layer with lines has pure black pixels with transparency producing it's gray appearance. An adjustment can't make black blacker than black
    A mask is grayscale without transparency. So if you convert the transparency to a mask, you have grayscale pixels in the mask which can be affected by an adjustment. The result will be a change in the appearance of the masked layer.

  • How to draw centre line with white background?

    Hi,
    I need to draw a centre line with white background on it. Now i'm doing it by pasting the main line in the background and giving it white so that it shows a white backgound. Is there a way to do just by drawing like normal lines. If we can, is it possible to control the white backgound only to show less than the original line in both ends. This is for illustrations i do for exploding views and i need to draw this line to show it as assembly drawing.
    Thanks
    Manoj

    1. Draw a white line segment of desired width (stroke weight) with round cap (Stroke panel) for the background line.
    2. Copy, Paste in Front
    3. Change to desired foreground color, butt cap, reduce stroke weight.
    4. Opt/Alt–drag foreground segment to overhang background segment by desired amount on both ends.
    5. Select both segments and drag to Brushes panel, choose Art Brush.
    6. In Art Brush Options choose Stretch Between Guides, drag guides somewhere to the inside of curve of round caps. (If in step 3 you chose black, set Colorization Method to Tints. Then you can select any color for the foreground segment by setting the stroke color.) Name the brush as you choose. Click OK.
    7. Draw any path and apply the brush.

  • I have small black lines that appeared after I exported from word to PDF. I can't remove them.

    I can't edit/delete the black lines with content editing or form editing (they are not selectable, just like a line that was created in word prior to export), and when I tried to write a white line over it with a comment mark up, it does not show when opened with adobe.
    Further, redaction with a white box erased nearby text or text boxes.
    How can I white out/remove these small lines?
    I'm using Yosemite OS X with a macbook pro, acrobat XI.
    Thanks!

    Hi ,
    Could you please tell is that some specific file in which those black lines have appeared or are there any other files as well ?
    You can try exporting another test file to PDF and compare the results .
    Will it be possible for you to share the file with us so that we can analyze at our end ?If yes ,please share it on [email protected] .
    You could also send us the screen shot of the files ( both after and before export) so that we can have a look how it looks and what is the method to remove those lines.
    Regards
    Sukrit Dhingra

  • Rulers don't show in elements12, just a plain black line

    I have PSE 12 and I cannot bring up the 'Rulers' all I get is a black line with no markings on it. I have tried everything I know including re-installing from the wed

    Could you post a screenshot so we can see what your seeing?
    Your using View>Show Rulers?
    What operating system are you using?

  • Black screen with apple, 1st generation nano

    When it is plugged into the usb cord into the computer in begins to flash and then goes to a black screen with an apple on it. How do you fix it? What does it mean?

    http://www.apple.com/support/ipodnano_replacement/

  • Line with 0 quantity for main item with batch split

    Hello experts,
    I have one line item in delivery. Delivery split is there: There are 1 spilt items with 1 batch nos. The main item category and the batch split item category are TAN.
    My system is showing 2 line items in billing, the batch line with quantity and the main line with zero qty. How to prevent this and have only the lines item in invoice with batch/qty. I don´t want to see the main item with o quantity.
    In VTFL I have routine for copying requirements 004 and Billing Quantity B. I need to create another copying routine or I need to use another item category for batch lines?
    Thanks in advance
    Pablo

    Hi Pablo,
    It is advisable to have a different item category for Batch split items.
    If you want the batch split items to suppress and show only the Total in the Invoice. Yes it is possible.
    1) You can do this in the Copy controls in VTFL - Delivery to Billing, go to your Item category and go to Item details - Change the billing Qty to 'G'.
    2) Go to Shipping > Deliveries > Item categories Determination in Deliveries > Define item category.
    Go to your item category which is used in Batch Split
    Remove the Billing Revelance and make it blank and Save.
    Now when you create the Invoice for Batch split - Only the total quantity will be displayed without the subitems - like in Delivery note or Delivery..
    Please check and revert back for any more details
    Rgds
    Sunil.

Maybe you are looking for