Flash, IE 8 and Windows 7 Compatibility Issue on new Dell laptop

Hello,
I am trying to figure out why our Flash header is not working on our boss's laptop running Windows 7.
The specs are:
Windows 7 Professional 64bt version
IE 8.0.7600.16585
Flash 10.0.42.34
One of other sites Flash header works fine, but not our main site.
The one that works is http:/www.ideachannel.com
The one that does not work is http://www.izzit.org
Any help would be apprecciated.
Regards,
Don

I did'nt go line by line through the source code... but I do not see any Flash header or content on ideachannel.com, I do see it on izzit, which leads me to believe, that there may be some permission issues with the laptop. Flash and active x must be allowed through firewalls, and system, check the the Flash Global settings also, and make sure browser(s) have plugins or addons neccessary.
It also may be that the version of IE? your running is the 64bit vers.? Try resetting the IE default to 32bit see if that helps, not sure if it has changed yet but last I checked Adobe did not support IE 64bit.

Similar Messages

How can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

how can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

It's hopelessly outdated. It's simply not compatible.
Mylenium

Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'. This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes. Any ideas?

Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'. This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes. Any ideas?

try this...
This is how I managed to fix the problem...and I hope this helps others in the similar situation.
I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
I hope this will help others who are having problems to burn stuff on iTunes.

Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell computer w/ windows 7 with minimal programs installed

Itunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a nItunes will not connect to the internet or access store with working internet connection. ive already tried updating to latest version and turning off windows firewall. running a new dell, windows 7 ultimate, no virus or firewall programs installed.

This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013

I've read others' posts on this issue and still need an answer that works. Safari keeps dropping wireless; no issues on a Dell laptop with XP in same room. Cleared cache, etc. - any other ideas?

I've read others' posts on this issue and still don't have an answer that works! Safari keeps dropping wireless connection every 5 - 10 minutes (it's gotten progressively worse over the last month). My husband, sitting 10 ft across from me, has no issues on a Dell laptop with XP so doesn't appear to be the router or ISP. Safari v5.0.6 Mac OS 10.5.8. Cleared cache, tried kill commands in Terminal, restarts, etc. Only restarting seems to keep it at bay for a period, but then it will start again. Any other ideas?

You posted a question about a problem connecting a Mac to a wireless router. You have an old Dell laptop that works well with that router.
I pointed you to a brief discussion with another poster who had a problem connecting a Mac to a wireless router. He had an old Dell laptop that worked well with that router. I suggested he upgrade the router firmware. He upgraded it, and the problem was solved. Another poster in that thread did the same thing, and his problem was also solved. Within the last day or two, I made the same suggestion to a third poster in another thread, and his problem was solved too.
Conclusion: Upgrading the router firmware helps sometimes.
If I understand your response, you think that checking for a firmware update isn't even worth a try. Am I missing something?

W/ this latest version, getting MANY "the connection was reset" pages, plus VERY VERY VERY slow loading. I'm running Windows 7 on a new Dell. What is up w/ that?

w/ this latest version, getting MANY "the connection was reset" pages, plus VERY VERY VERY slow loading. I'm running Windows 7 on a new Dell. What is up w/ that?
I don't know how else to phrase that. I'm a pretty good user, but after defragging, backing up, and getting rid of a bunch of files that "may" slow down performance of firefox, the fact is, "the connection was reset" comes up five or six times a day--AND the browser is going slow as molasses. I haven't had this much trouble since before I got my new dell.

hello whatagem123, it is never a good idea to stick with outdated versions of firefox just for the sake of addons, as this will put the integrity of your system and your the personal data on it at risk - there are various [https://www.mozilla.org/security/known-vulnerabilities/firefox.html known security vulnerabilities (some of them highly critical)] that were fixed in later versions!
so please [[Update Firefox to the latest version]] & [https://www.mozilla.org/en-US/plugincheck/ update your plugins] (your java plugin has security vulnerabilities that are actively and widely exploited on the web).
afterwards i'd recommend resetting firefox - this will keep your bookmarks and passwords but will get rid of most other customizations. this might well fix both the issues you've described in your question...
[[Reset Firefox – easily fix most problems]]

Any known issues with Flash player 9 and windows 2003 compatibility?

Hi guys..
Is there any known compatibility problem with running flash
applications
on Windows 2003 Server?
My application runs just so well with Windows XP
yet it throws a 2015 bitmap error
when it is being run on the windows 2003 server.
(Not quite often but often enough. the only difference is the
operating
system)
Is there any known issue about this?
Or could there be any compatibility problem with flash player
and
windows 2003?
Any hints would be deeply appreciated...
Thank you...

Hyperion 32-bit Web Apps are fully compatible with Essbase 64-bit. Same with 32-bit Essbase client.

Seagate ST9750420AS HDD and W700ds compatability issue

There seems to be a compatability issue with the Seagate 750GB drives (ST9750420AS) and the W700ds (and possibly other W series notebooks).
With the controller set to RAID in BIOS Windows 7 and possibly other OSs can not access the HDDs. This configuration results in a 7B "inaccessable boot device" error BSOD.
Testing revealed only the ST9750420AS with FW 0001SDM5 (the only FW avaible) results in the 7B BSOD regardless of the RAID driver version installed. I have not phiscally removed the Turbo memory device to see if it plays a role in the problem or not.
The W700ds (2757) system I have available to test is compatable with the following Seagate (drives with various FW versions):
ST9160823ASG
ST9500325AS
ST9500420ASG
ST9500420AS
ST9640320AS
These were tested with Widows XPP 32bit, Windows 7 64bit and Linux 64 bit, these were tested in both RAID and non RAID configurations.
And not compatable with:
ST9750420AS, tested with Windosw 7 x64 in RAID configuration.
Any comments, corrections or resolution welcom.
Thanks
JMG

Hi Jamessts,
Welcome to the HP Forums!
I have read your post on installing your HDD to your HP computer, and I would be happy to be of assistance!
To determine your product specifications, I will need to know what the Product and Model Number of your desktop is. The next piece of information I will need is the version of Windows you have on your computer.
Since you stated that the HDD works in another computer, I suggest following this resource: "Windows could not complete the installation..." solved by MarkBeacom. This should help in setting up your HDD for use on your computer.
Please post back with the results of your troubleshooting, and I will diligently follow up with you!
Cheers
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Vista "Problem Reports and Solutions" - Compatibility issues?

The Visa +Problem Reports and Solutions control panel+ is reporting three problems which I cannot seem to be able to find a resolution to.
( So far I've just installed Vista 32 business ed. on my iMac 20". Installed bootcamp drivers, updated bootcamp to 2.1 and applied Vista updates.)
*The Problem Reports and Solutions control panel reports the following:*
1. Download and install the driver for Apple performance counter
This problem was caused by Apple performance counter, which was created by Apple Inc..
2. Compatibility issue between Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 and Windows. This problem was caused by a compatibility issue between Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 and this version of Windows. Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 was created by Intel Corporation and is distributed by Apple Inc..
3. Problem caused by Apple Desktop Null Driver.
This problem was caused by a compatibility issue between this version of Windows and Apple Desktop Null Driver. This product is usually distributed by the company that manufactured your device or computer. Note. If you bought Apple Desktop Null Driver from a retailer and installed it yourself, you will need to contact its manufacturer.
Are these genuine, and if so, is there a solution? No solutions are proposed by Vista itself.
Mac OS 10.5.5 , bootcamp 2.1
Message was edited by: noutram

A performance counter is not something that is usually in use by any application except by the developers of the unit itself. nothing to be alarmed about (well, except perhaps that it should have been removed).
A null driver is (as the name indicates) null, there is no functionality assigned with it. MS error message is just brilliant "there is an error in your null driver", like what, there is no functionality in a null driver. So no problems there either.
I got the 2 above error messages on the very first generation 17" MBP for ages and so far not seen any impacts in it for my work.
The Intel issue is interesting, it might be a good idea to see if Intel has an updated driver for the problem.

Windows compatability issues

Since I got my macbook in Decemeber, I have noticed that whenever I am using Microsoft Word, and I save the file it saves a .doc, (there are no compatibility issues and I am saving as a microsoft friendly document) but when I email it to someone with a PC or put it on my flashdrive to open on another computer (PC) it saves as a .dat file. The file will open word if I am opening it from the flashdrive, but if I email it that person (mostly my professors) cannot open the file. It has grown quite annoying and would really appreciate any help PLEASE!!

Go to "Attachments" in Mail's "Edit" menu and enable "Always Send Windows Friendly Attachments".

Flash CS6 split view window/focus issues.

I'm using Flash CS6 editing multiple AS3 files and the file tab selection behavior is frustrating and I was not having these issues in Flash CS5.5. When viewing two code windows in a split plane, clicking from one window to the next does not automatically focus/activate the code tab.
Steps to reproduce:
1) Open two AS3 files and arrange them into a 2 window split view.
2) Select the code file tab on the right.
3) Within the right code file, copy a line of code.
4) Click the mouse within the first code file on the left and paste your code line.
5) Note that your code pastes into the right file.
6) Note that the left code file does not receive focus when the cursor is in the window.
OS: Win 7

Ya, I havent used Flash Builder yet only because FP is what I'm used to. However, just imported my project into FB 4.6 and it's alot better so thanks for the tip.
So I tried undocking, and the bug remains if you copy a line from one 'undocked' tab, into a docked tab. However if both code windows are undocked, the copy/paste and window focusing works fine, but in my case with ~20 class files, it would be a nightmare.
The workaround is either edit the project in CS5.5, then open and re-save it in CS6, or in CS6 click the file tab you want to edit, then click within the file, then paste, every time you are copying a line from one file to another.

Lion, Boot Camp and Windows 7 Issues

Couple of questions regarding Lion, Boot Camp and Windows 7... I never had issues with Snow Leopard and setting up Windows 7 on my iMac (expcept the dreaded black screen after restart, bu got that fixed)
Let me start off with my specs and then I will ask my questions:
iMac 27"
i7 Quad Core (1st gen)
16GB Ram
1TB HDD
OS X Lion (Fresh Install - Not Upgrade)
All updates for OS and iLife and other installed software:
Adobe Creative Suite CS5
MS Office 2011
Boot Camp 4.0
Window 7 Ultimate
Ok... here are my questions.
When I fixed my black screen issues after installing a fresh copy of Windows 7 - I had to install MacFUSE and Tuxera NTFS in order to delete the the stock ATI driver so the second rebot on the install of windows 7 would work and boot correctly. After rebotting into my mac side I now always get this message from Tuxera.
What does this mean? Now in the finder when looking at the computer drives.. It does not show the BOOTCAMP partition...
However, when I resart i can hold down the ALT key and get this menu:
I know this might seem strange to ask, but why are the Macintosh HD and the Recovery HD text smoothed and the Windows text not? Being a design I see the difference and it makes me wonder why this is. (It is almost like the BSOD icon apple used forwhen connecting with shared PCs)... Anyways, I can boot into windows when clicking this drive.
After getting to windows 7 it will not let me run updated. The OS is activated and I have even installed SP1 manually, but it always tells me that the Update service is not running. When in fact it is. I have checked it and it is set to start automatically. I have reset and shutdown my computer more than 10 times... I can't figure out what the issues are.
Overview:
Why do I get the Tuxera NTFS error?
Why can I see the boot camp partion when manually selecting it form startup, but it does not show in OS X
I can't get Windows to update? Any ideas?
Thanks for any help you can provide.

These various utilities like Tuxera are incompatible with Lion. Partly because MacFuse is incompatible. You need to remove them completely.
As for the Windows partition you might consider using Boot Camp Assistant to remove it. Then make a new partition and install Windows. Remember to use the Windows formatter to format the Windows partition NTFS.

New hard drive and Windows 7 issues

I bought a new 1 Tetra Samsung hard drive for my computer since 150GB was not enough. I did this because I need windows partitioned for school. After I installed the hard drive and inserted the Mac OS disk, it would not recognize the hard drive to install. Since then, I have read previous forums such as: https://discussions.apple.com/thread/3322843?start=0&tstart=0
Now, the issue is: I went ahead and installed my Windows XP SP2 because I could not get Mac OS to install. I have also downloaded the Windows 7 Professional update from Microsoft and have a Operating Disk on its way in the mail. I am having some issues with sound and camera and probably others that I don't know about yet, like my graphics card and such. What should I do?
1. Erase HD and install the Mac OS, because I do want this on my computer. Then download updates for Windows 7 bootcamp and reinstall Windows 7 when I get it in the mail.
or,
2. Is there a way to fix the driver issues that I am having without having to reinstall windows. I have not tried to partition yet and install mac.
I think it would be best to:
Install Mac OS
Download updates
Bootcamp and Install Windows 7
What do you think and do you have any advice as how I should go about this. Oh, btw, living in a PC world and coming home to my Macbook Pro 3,1 and realizing that it is not as functional is kinda disappointing.
So, I found this site for the sound: http://www.stuffedcow.net/macbook_audio
And: http://www.cirrus.com/en/products/cs4207.html
I am not sure how to go about installing a new driver. Do I download and save or do I run a certain .exe?
I found this post and was reading, but I am not certain about the right driver for the sound. If I erase the hard drive and install mac. Then, bootcamp and install windows, will I loose my wifi driver? Windows 7 should have that update, but according to this post, it may not.
https://discussions.apple.com/thread/2534313

If I were in your shoes I would want to understand why I couldn't install OSX on the internal drive before going any further. Without getting past that hurdle you may or may not be successful in your aims, but you are outside mainstream intended ways of running Bootcamp.
Just a couple of starters:-
1. Is your internal hard drive (samsung) formatted with a GUID partition table and HFS+ file system? All done in Disk Utility, booted from the Install disk.
2. The Apple Install disk (plus subsequent Apple Software Updates) has all the drivers Bootcamp needs, without having to find and download from elsewhere. I run Windows 7 64 bit on two Macs and have never had to go and find a driver. (Of course Windows does it automatically for me for other hardware). Sorry if this next point is insultingly obvious, but just to check that you know you can put the Apple Install Disk in while running Windows and Windows find the installer.
You don't say anything what your MBP is or what version of OSX you are running. I am not fully up to date with the inplications of Lion and Bootcamp drivers as there is no install disk. I believe 2011 MBPs won't run XP.
Your comment "Oh, btw, living in a PC world and coming home to my Macbook Pro 3,1 and realizing that it is not as functional is kinda disappointing" implies that you haven't had a Mac very long. Although Macs are easy to pick up and use, there is a LOT to learn about customisation and using it properly and getting the most out of them. I have a number of relatives who still use OSX "out of the box"....it's like driving a car in first gear, and complaining "this car doesn't go very fast". Not a perfect analogy as speed is not the issue here.
Sorry if some of this post is missing the target...just take on board the bits that apply.

Can someone provide HTML and CSS compatibility issues list in IE 12?

Hi There,
We recently come to know from our team members that Microsoft going to release Internet Explorer (IE) 12. But there are some compatibility issues with HTML and CSS which can break our web sites. Can someone provide us list of issues that we can face in IE
12, so that we can work on their resolution.
Regards,
Ankush

Hi,
http://status.modern.ie
or
f12>Console tab>
document.body.style
Rob^_^

Flash Player 9 And Windows 98

I am current having a problem wwith flash player 9 under
windows 98. It seem that when I visit a site that uses Flash player
that Flash keeps using more and more of the system memory to the
point that the system resources will be exhausted, causing the PC
to slow and stop functioning properly. Once either all instances of
IE or Firefox are closed the resources are returned and my PC
operates "normally" again. Depending upon which web sites are
visited this problem can occour after as little as 5-10 minutes.
Returning to flash player 8 removed this problem. Are they any
known confiliction under windows 98 when using flash player 9?
Any help with this problem would be greatly
appreciated.

well I managed to generate some good news. I attempted
installing the version 9 again and it didn't work so I went
throught the install list and located the subdirectory it was
attempting to ubsuccessfully install into and deleted the entire
subdirectory and reinstalled again. this time it correctly
installed version 9 and when I rebooted and ran the version checker
it finally responded with the correct version 9 within the correct
oS win 98. I think what had happened is I accidently clicked the
uopgrade icon and it overwrote version 9 with version 10 and
wouldn't allow me to rewrite the version 9 back into its original
location. anyways it is now working and I'll know better that to
authorize a version upgrade on the 98 system.

Flash, IE 8 and Windows 7 Compatibility Issue on new Dell laptop

Similar Messages

Maybe you are looking for