Flash image
I just added a flash paper to a Dreamweaver CS3 site but I
can't get it to stop scrolling. I know this should be done in Flash
and not in Dreamweaver, but I can't figure out how to make the
actions work to stop the motion after one scroll. I'm a new user of
Flash and need some simple instructions on how to do this if anyone
would be so kind.
The site that it is on right now is
http://barbarasansone.net.
It's the index page so it will come up first thing.
Jacqueline Gikow
[email protected]
I am not sure about flash paper however if you are using
flash a simple stop command in the actionscript of the frame that
you want the picture to stop at will work for you.
Open flash
open your movieclip or wherever you created the dropdown
picture scroll
create an Actions Layer
In the actions layer go to the frame where you want the
scroll to stop.
Open the Actions Panel
Type in the following:
stop();
Hope it helps,
Wayne
Similar Messages
-
Why does my flash image viewer look different in firefox than in IE...
So I have created a horizontal spry bar that overlaps a flash image viewer slide show. When i load the page in IE everything works fine, but as soon as you open it in firefox it works improperly...you can hit refresh in firefox and sometimes it resizes the image I don't understand how that is possible....if you have any input it would be greatly appreciated! Thank you!
You need to be aware of the limitations of the various browsers and make sure you use web-safe fonts and colors.....
http://www.iwebformusicians.com/WebMusic/FontsandColors.html
Do a Command A on all your pages in iWeb to make sure that objects/text boxes are not touching or overlapping.
Firefox has problems with displaying drop shadows/frames etc.
To get help with specific issues you would need to tell us the URL of our site. -
My js drop down is not showing up in safari with swishmax flash image
Hi. I'm not a mac user so I'm a little out of my element here, but I've designed a new home page for my work site and and all is ok except that my flash image (created in swishmax) is interferring with the drop down js nav. Basically (from what i hear from my users) the drop down apears and then disapears upon selection. I was having a similar issue with firefox yesterday and that is now fixed by adding the wmode tranparent function. Looks like that function is not supported by safari? Is this problem because I am using swishmax?
Please, if you can shed any light on the subject... I would be eternally gratefull!
this is the page in question: www.arc.com
Here is the code i'm using for my flash image:
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#v ersion=6,0,79,0"
id="home3"
width="800" height="280"
<div class="jive-quote">
<param name="wmode" value="transparent">
<param name="movie" value="/images/index/home3.swf">
<param name="bgcolor" value="#FFFFFF">
<param name="quality" value="high">
<param name="allowscriptaccess" value="samedomain">
<embed
wmode="transparent"
type="application/x-shockwave-flash"
pluginspage="http://www.macromedia.com/go/getflashplayer"
name="home3"
width="800" height="280"
src="/images/index/home3.swf"
bgcolor="#FFFFFF"
quality="high"
swliveconnect="true"
allowscriptaccess="samedomain"
<div class="jive-quote">
</embed>
</object>
laptop Mac OS X (10.0.x)Hi
sorry to say that the problem is still there.....
works fine in Camino & Firefox.
The page fails W3C validation, & Safari can be picky about that sort of thing. A valid doctype would be my first suggestion.
iMac G5 rev B (OSX 10.4.7) 2GB 250GB -
I purchased the Flash Image Gallery Extension. Installed and
created several beautiful working galleries.
In my image gallery (link below) there are Category titles
176, 186, etc.. When you click the titles it changes the thumbnail
pictures, while the main image remains the same.
Question: I'd like to click on a Category Title and have the
Main Fullsize image change as well. This would help visually to see
that you have in fact changed to a new category. As it is now, it
is not evident that you've changed category. You have to go to the
tn images and click there.
Can you give me some direction on how accomplish this?
Perhaps a behavior - when category title is clicked on the main
image will appear for that category? Seems like a simple edit. Can
I do such an edit on a purchased gallery template file extension?
New to flash, quite familiar with DW CS3. Below is a link to
my gallery:
My
Gallery LinkHi
These can be linked together - it will need you to change the
destination of the 'Front Page' link (URL) to point to the
appropriate 'Gallery', in the XML you can identify sections by
using the same 'Gallery Id' from the link (URL) in the 'Front
Page'.
Does that make sense?, if you need more help then let me
know -
Dreamweaver/Flash Image/Link
Hi. Thanks in advance for any help. I design a small website
for the company I work for using Dreamweaver as the main program. I
have never placed a Flash image before and cannot figure out how to
place a link to another website on this image.
Here is what I have now:
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0"
width="392" height="72">
<param name="movie"
value="../images/NOLN_banner_v1.swf">
<param name="quality" value="high">
<embed src="../images/NOLN_banner_v1.swf" quality="high"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
type="application/x-shockwave-flash" width="392"
height="72"></embed>
</object>
I need to link this to another website other than my own. I
thought it would be like any other image in Dreamweaver. Help?
I guess I should mention the Flash image was provided by a
company wanted it linked to their site.> I need to link this to another website other than my
own. I thought it
> would
> be like any other image in Dreamweaver. Help?
It's completely unlike any other HTML element, since it's
EMBEDDED in the
page, not actually on the page.
You cannot add a link to a Flash element using HTML. You must
add this link
in the Flash Actionscript. To do that, you would have to have
Flash, and
the SWF file's parent FLA file....
Perhaps you could ask the provider to make the link for you?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"George Markle" <[email protected]> wrote in
message
news:[email protected]...
> Hi. Thanks in advance for any help. I design a small
website for the
> company I
> work for using Dreamweaver as the main program. I have
never placed a
> Flash
> image before and cannot figure out how to place a link
to another website
> on
> this image.
>
> Here is what I have now:
>
> <object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=6,0,29,0" width="392" height="72">
> <param name="movie"
value="../images/NOLN_banner_v1.swf">
> <param name="quality" value="high">
> <embed src="../images/NOLN_banner_v1.swf"
quality="high"
> pluginspage="
http://www.macromedia.com/go/getflashplayer"
> type="application/x-shockwave-flash" width="392"
height="72"></embed>
> </object>
>
> I need to link this to another website other than my
own. I thought it
> would
> be like any other image in Dreamweaver. Help?
>
> I guess I should mention the Flash image was provided by
a company wanted
> it
> linked to their site.
> -
Hello,
I am trying to make a image slideshow for my companies new website.
I used the Flash Image Viewer plugin from Dreamweaver, but it doesn't contain the transitional effect desired.
Every tutorial I find talks about advancing the images through an interactive control, I just want the images to change by themselves and do a fade transitional effect between images.
Can anyone please point me to a tutorial that has this w/o the intractive buttons? I have been looking on the internet for hours and can only find tutorials / example w/ the intractve controls.
Thank You for any positive direction in this.Hmm... no luck so far. Thank You though for your suggestion.
I am really "green" to flash and was only confused by the template provided by Flash.
All I need to do is have images fade in and out of each other and then repeat over and over.
I know this isn't too hard. I found a tutorial that showed how, but my Firefox decided to close and I lost the page and haven't been able to find it since. Tried the history log, but no luck.
I will keep searchin...I know it's out there. -
Flash image viewer, picture scale problem in CS3
Please someone help me. I have built a website 3 years ago, and I still have this problem. In CS3 I added a flash image viewer (slideshow.swf) as a slideshow to show gardens we have made. When you first visit the site and look at the pictures (wich are bigger than the viewer window because of picture quality issues) they don`t shrink to fit into the viewer window, you only end up seeing a fraction of them. But when they download and you go back to see them again a second later, they become the right size. It also swiches to the right size when the loop play gets back to the first pic again.
In the flash element properties I tried the different scale settings, and looked at other settings too but I couldn`t make it work.
I think making the viewer window as large as the pictures, would look odd. Maybe buying on other slideshow program to insert into dreamweaver would work.
If you would like to see the site its: tsugagardens.com , than look in the photo gallery and after the pics download go back with the back button and see the difference in the pics.
Thank you for your efforts,
Tiborfunction(){return A.apply(null,[this].concat($A(arguments)))}
serestibi wrote:
Please someone help me. I have built a website 3 years ago, and I still have this problem. In CS3 I added a flash image viewer (slideshow.swf) as a slideshow to show gardens we have made. When you first visit the site and look at the pictures (wich are bigger than the viewer window because of picture quality issues) they don`t shrink to fit into the viewer window, you only end up seeing a fraction of them. But when they download and you go back to see them again a second later, they become the right size. It also swiches to the right size when the loop play gets back to the first pic again.
In the flash element properties I tried the different scale settings, and looked at other settings too but I couldn`t make it work.
I think making the viewer window as large as the pictures, would look odd. Maybe buying on other slideshow program to insert into dreamweaver would work.
If you would like to see the site its: tsugagardens.com , than look in the photo gallery and after the pics download go back with the back button and see the difference in the pics.
Thank you for your efforts,
Tibor
Here is the code for the image viewer -
Client says can't see Flash images
Let me request your patience in advance - I don't have many
details to provide so I know the possibilities are wide open and
therefore difficult to pinpoint. Here goes.
We created an HTML website with some flash content and some
static jpeg images. My client's client says he cannot see the flash
images. All I know is...
-The client is on Win2000
-He uses a version of IE
-He does not get prompted to install ActiveX controls
-He says he does not see the image placeholders in place of
the Flash animnations
What do I need to ask this individual in order to pinpoint
the problem?
-what version of IE he's using and Flash player?
-does he have install Active X prompt deactivated?
-anything else?
-is there something with Win2000 that might affect what's
going on?
The person having difficulty is from a very large corporation
and no doubt has an IT dept. Any suggestions on going through
them???
Thank youHello Jamie,
First I'd have the client visit this page and verify what
version (if any)
of Flash they have installed:
http://www.adobe.com/products/flash/about/
Can you send a link to the page you are trying to show the
client?
Jesse H.
Adobe Community Expert
My site:
http://www.jharding.com
Free Blog Radio:
http://www.tornadostream.com
> Let me request your patience in advance - I don't have
many details to
> provide so I know the possibilities are wide open and
therefore
> difficult to pinpoint. Here goes.
>
> We created an HTML website with some flash content and
some static
> jpeg
> images. My client's client says he cannot see the flash
images. All I
> know
> is...
> -The client is on Win2000
> -He uses a version of IE
> -He does not get prompted to install ActiveX controls
> -He says he does not see the image placeholders in place
of the Flash
> animnations
> What do I need to ask this individual in order to
pinpoint the
> problem?
> -what version of IE he's using and Flash player?
> -does he have install Active X prompt deactivated?
> -anything else?
> -is there something with Win2000 that might affect
what's going on?
> The person having difficulty is from a very large
corporation and no
> doubt has an IT dept. Any suggestions on going through
them???
>
> Thank you
> -
I am creating a page in DW8 and have inserted an instance of
the Flash Image Viewer though despite changing the parameters in
the Tag Inspector and the Flash Element pane to say that the
controls should not be visible - they are and the pictures do not
show when I preview the page in the browser (IE7). I have created
on another page previously in another site where this works
perfectly. Can anyone make any suggestions?
The other odd thing is that when I preview in Opera or
Mozilla Firefox, they work. The same when I publish.
Working site =
http://www.fontanadesign.co.uk/hotel/double.html
Non-working site =
http://www.fontanadesign.co.uk/harmony
Any suggestions gratefully received.
SteviePlease, first make a difference:
Are you trying to display a JPG file or a Flash
Video/animation ?
When you are designing the web site, you choose which one you
are going to insert on the page: In this sense: is you need to put
a Flash File, go to: Insert / Media / Flash and then choose the
file you are going to insert in DW.
On the other hand, If it's a JPG file you insert in a
different manner: select: Insert / Image , and then choose the JPG
file.
Rememer that the same path you are giving to the files (JPG
or Flash) is going to be claimed by the server, so create the same
directories containing the same names, in your hard drive and on
the server.
To finish it, it doesn't matter if you have the Flash
program. You only need the Flash Reader, but it has to be the same
version as the file you are using (it is much better, not totally
necesary).
Well, hope it will be usefull, best regards -
How to create a home page (with flash images) in Oracle Portal 10g
Hi,
I want to create a home page in Oracle Portal 10g using flash images.
How to create all those things ?
Weather it should be created in pages or pagegroups or HTML portlet / some other.
please help me.You can find in knowledge exchange a script to create an flash file item type. With this installed you can add a flash file to an item region on a page.
Grtz,
Dirk -
XI PDF file displays flash images as 'Loading Data Please Wait'
I'm trying to 'Convert Web Page to Adobe PDF'
The web page I'm trying to convert contains Adobe Flash images.
The PDF file is created, but when I open the resulting file instead of seeing the flash images I get the following
I am using a trial version of Adobe Acrobat XI Pro.The URL is on our intranet so won't be accessible. The url is
http://hcdev.support.local:8080/apex/f?p=108:1:450638934290001::NO:::
Adobe recognises the flash content when I right click on the flash content and select 'Save as PDF'
When I open the resulting PDF file I can see the flash content has been captured.
When I right click on the webpage containing the flash content and click on 'Convert webpage to Adobe PDF'
When I open the resulting PDF file it recognises that there is flash content to display, but for some reason fails to display it.
Adobe recognises the flash content and the way it is structured when I right click on the flash content, but Adobe is having problems either saving or displaying the content when I try to convert the whole page. -
Scalable swf flash images in pdf?
I am using Adobe CS 5.5 package. If there any way to create (vector) scalable flash graphics when I create pdf files? These flash images (swf files) are scalable in my html file, but when I "print to pdf," they are rasterized.
Any help would be appreciated.
JayYes and no.
"Printing" any web page to PDF will always rasterize non-text objects, it's part of the way the web browser works.
If you use the Acrobat "Create PDF from Web Page" button, there's an option to retain interactive multimedia. With this chosen, SWF content in the web page will remain as native SWF content on the PDF, so it will scale when you zoom in to view the PDF on screen - but when you print that PDF it will be rasterized again. -
The best Free Flash Image Gallery
Which is the best free flash image gallery for Iweb?
There is no best. That's because they are all different from each other and each brings different properties to the table. Here are some to consider:
SimpleViewer and Flash Album Exporter
Flash Album Exporter Postcard and AutoViewer Slideshow Themes
Jalbum Examples - Jalbum has over 100 skins/themes to choose from.
OT -
Flash image as a background?
How do i get a flash image as a background in dreamweaver cs3.
do i need to change the file name to somthing else?The parameter that needs to be set is "wmode"... and it needs to be set to "transparent". This can be set in the HTML section of the Publish Settings in Flash (window mode selection list), or edited in the html embedding code if that parameter is already present.
I would normally also recommend changing it to a jpeg or gif if it is not an animated piece except if it is using Flash drawn vector graphics... as a Flash drawn piece it will adapt cleanly to a resize where a jpeg or gif might lose clarity, and it could be a significantly smaller file than a jpeg/gif version. Personally I never tried using a Flash piece as a background, so I'd say try it first anyways just to see if it works well... trying things is the best way to learn. -
Im trying to find a script to help me create a flash image
strip to add in my banner... i can not seem to find anything online
to help me... any ideas?
here is an ie of what i mean
http://www.narrenzunft-schiltach.de/
thx in advanceif you want it to be that basic you might go the javascript
way.....or
google javascript or flash slideshows......10 gillion out
there...
"tomablunt1" <[email protected]> wrote in
message
news:gnnamp$f18$[email protected]..
> Im trying to find a script to help me create a flash
image strip to add in
> my
> banner... i can not seem to find anything online to help
me... any ideas?
>
> here is an ie of what i mean
>
>
http://www.narrenzunft-schiltach.de/
>
> thx in advance
> -
Flash image not showing up?
Kay, so I uploaded my website & the flash image/logo I created for the website just doesn't show up.
Instead, in it's place, is a "dot dot dot". Literally a few ..... that flash in as if it's loading & the dots just keep looping.
It shows up on my computer as dots until I refresh a few times, then the logo works. But on no one else's computer does it work.
Does it matter that my computer is a Mac & everyone else's a PC? Or maybe the difference is that I created it on my computer so it just works on mine?I'm not sure how to upload a .swf or .fxp files for you to see, the best i can do is show you the website:
www.virtualinkwriting.com
and tell you where the "........" is, should be this logo
http://img.photobucket.com/albums/v232/snowangel223/Screenshot2010-05-26at125633AM.png?t=1 275595408
with the "V" starting out big, then small (as if falling then hitting the page, or splatting) & then the writing shows up... very simple.
**NOTE: When you hover over the "........" where the logo should be, there is a "V" that will show up. This is not apart of the flash logo, this is just an image I put in flash catalyst so that when you hover over the logo, this V shows up bigger so it gives the effect that the V grows... in other words, it makes it known that you can click it to go to the hope page. hope that makes sense.
and YES the swf DOES load an external image. The big splat V is a photoshoped logo that I uploaded into flash and added the type. Then saved and uploaded the whole thing into flash catalyst.
Thank you in advance.
Maybe you are looking for
-
How to create a new value for template classification??
I want to classify a workflow template, I mean I will not classify my template as a general task. Using TA PFTC_CHG I get a list with all the entries that a customized in my system. My question is how to create a new entry in that list? System is 46C
-
How do you un encrypt a backup?
I encrypted the backup for my iPhone and the password doesn't work anymore....how do you either re-set the password or un encrypt it?
-
Exception handling PI - C# Service
Hi all, I have the following scenario Scenario: Client Middleware Webservice ERP system --> XI --> C# webservice Everything works fine. But now I have one problem. In the C# webservice there are different ex
-
Clear legend names in mixed signal plot
I want to clear a graph entirely and rewrite new data to the mixed signal graph. In order to clear it, I have to clear both the data and the plot names from the legend. I do not see an easy way of clearing the plot names...anybody know the trick he
-
I do not know my security answers. now my account is locked
im unable to purchase anything in the app store becouse i do not know my security answers. now my account is locked and i am not recieving emails to change the security questions. This is very irritating that i cannot fix the issue withought posting