Flash Installer: Can't click next button
The "Next" button doesn't work - nor do any other buttons on the installer. I have to force quit the installer just to get out of the window...
I'm I missing something obvious? Example: http://cl.ly/image/0t3i213T2O2u
The Flash Uninstaller buttons work just fine.
I can't install Flash because of this.
OSX 10.8.5
Intel Macbook Pro
How to perform a "clean install" of Flash Player in Mac OS X
After that: System Preferences>Flash Player>Advanced
Similar Messages
-
How can I get next button in preview app
Hi,
How can I use next button in preview app. Means in one folder I have 10 photos and I want to open each photo to view in preview app. Or any other options to use the next button , plz help
YasIf you open all 10 at once in Preview, they will open together and there will be a filmstrip along the side for navigation.
Or, if you select all 10 in the Finder and simply open QuickLook (File/QuickLook or press spacebar shortcut), you will see Previous/Next buttons in the top left corner without having to open any programs. -
Can't click on buttons in Safari ???
When I use Safari (5.0.5) I sometimes can't click on buttons on websites... For example I can't click on the "Search" button in Google or the "Login" button on Facebook. When I click the buttons nothing happens! I have tried to reset Safari but it doesn 't help.
The problem can only be solved by restarting my iMac or by logging off.
Does anyone have the same problem ?Ok...
First, it's always good to have a backup browser installed. I use Firefox or Google Chrome.
For Safari... try Safari in another user account on your Mac. See if the same thing happens there. -
Can't click on buttons in System Preferences
Hi,
Whenever I go into System Preferences, I can't click on any buttons that open up a new window. I can unlock the pane, but I can't click on anything. The System Preferences window just flashes.
I have a video demonstration:
https://www.dropbox.com/s/vwj5297m61m1cyi/System%20Preferences%20-%20Blurred.mp4I finally solved it by using the Terminal commands here:
https://discussions.apple.com/message/23939515#23939515
The commands were:
defaults write NSGlobalDomain NSUseLeopardWindowValues YES
defaults write com.apple.Safari NSUseLeopardWindowValues NO
killall SystemUIServer -
I just bought a refurbished Dell Optiplex and I am going through the Windows XP setup, but I am unable to view the next button to continue setup. Please help.
Tranderson,
This is not a Windows forum.
Or, are you talking about installation of some type of SAP software?
Best Regards,
DB49 -
Unable to edit Flash file - Can't enter inside buttons/movie clips.
Hi
I am in the middle of creating a website using Flash CS5. I opened up my .Fla file one day to continue my work but I am no unable to access buttons and movie clips. When creating movie clips or buttons I am unable to get inside them, when I hover my mouse over them there is a white hand icon which never used to be there it was always just a normal mouse icon. I double click to enter inside the buttons/movie clips but nothing happens. This happens to existing movie clips and buttons on the page and even when I create new ones. Can anyone please help.. I really don't wanna have to start this website again!!
thanks!Hi,
This would normally happen when you have a Button symbol on stage and the 'Enable Simple Buttons' setting is enabled.
Can you check in your Control menu, if the option 'Enable Simple Buttons' is enabled? If it is, click on the option to disable it and then try double clicking on your symbols.
In case you still face the issue, can you send across your test file for investigation.
Thanks!
-Nipun -
I bought the first season of Doctor Who. When I try to watch the episode, "The Unquiet Dead", it freezes with about 10 minutes left. I can not start it from any other point once it freezes. I was wondering if there is anyway to fix this.
You can try to clear the cache and cookies to see if that makes a difference:
<h3>Clearing Cache</h3>
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and uncheck everything else.
#Now click the ''Clear now'' button.
<h3>Clearing Cookies</h3>
#Go to Firefox > Tools > Privacy > Remove Individual Cookies
#Find the site (ebay.com) that's having problems and clear all cookies.
#Restart Firefox
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article. -
Have to click Next button on results page twice
Help!
My first Captivate module is all ready to go, with one small
problem. When users get through a quiz and go to the results page,
they have to click the Next question twice. I'm not sure why this
is, and I can't seem to fix it.
For the rest of the slides, instead of automatic advancement,
users have to click a Next or Back button to go forward or back,
and I have quiz questions where the user can't go back, and no quiz
review, but I don't see how those would impact that one single
button on the results page, which of course I can't edit because it
only appears when a quiz is completed, and not actually during
design.
I hope this makes sense! Please help. You're my only
hope.Help!
My first Captivate module is all ready to go, with one small
problem. When users get through a quiz and go to the results page,
they have to click the Next question twice. I'm not sure why this
is, and I can't seem to fix it.
For the rest of the slides, instead of automatic advancement,
users have to click a Next or Back button to go forward or back,
and I have quiz questions where the user can't go back, and no quiz
review, but I don't see how those would impact that one single
button on the results page, which of course I can't edit because it
only appears when a quiz is completed, and not actually during
design.
I hope this makes sense! Please help. You're my only
hope. -
See above. Video will play automatically if on youtube, but I can't pause it, etc... Also if the video is embedded in a different website, I'll click play and nothing will happen.
Have tried clearing cache.
Have tried disabling add-ons and extensions.
Nothing works.check for adobe flash issues
* kb.mozillazine.org/Flash -
How can i click a button Programmatically
Dear sir;
there is way to run a button in a form Programmatically?
thank you Dear.Dany,
Yes you can.
Here is example.
Let's say you want to close a form Goods Receipt PO when it loads
If pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_LOAD And _
pVal.FormTypeEx = "143" And pVal.BeforeAction Then
SBO_App.Forms.Item(FormUID).Items.Item("2").Click()
end if
'This simulates the user clicking on the cancel button (item ID 2 on the form)
Please close the posts that are handled by assigning points. -
Can't click back button in Safari on Iphone
I'm not sure at which update this began, but I recently realized I can't use the back button in Safari. It just stays dimmed, when normally once you navigate to a new page it illuminates and then you can use it to go back. This is very annoying. Any suggestions?
Johnster .....
I am getting the same icon that you are getting whether I use mobile Safari or iCab Mobile identified as Firefox or even if I identity it as mobile Safari. I wonder if that means perhaps the podcasts was not created correctly. However, I know absolutely nothing about creating a podcast.
You obviously have been doing this successfully up until this point, but by virtue of the fact that I am getting the "No Plugin" icon in both browsers - whether viewing as a desktop browser or a mobile browser, I simply assume that there is a problem with the podcast.
The podcast plays fine in my desktop Safari on my MacBook.
Just so that you know, the preinstalled apps are only updated when the iOS is updated. There are never updates released for Safari, iTunes, the App Store and so on, except for the features that may be added when the iOS is updated. -
I can't sync a movie onto my ipad because I can't click the button
I downloaded it onto my phone but I can't seem to sync it onto my ipad because there is only half the button there and it is unclickable!
Settings -> Store -> Apple ID
In the future, please search before posting asy our qeustion has been asked and answered dozens of times in the past. -
Appstore can not click any button
I've been trying repeatedly to do software update on my mac mini 2011 , when oepn AppStore, if I click on "featured", "top charts", or "categories" or "updates" or "purchases". nothing happen, Thanks!
Mac Mini 2011,Lion 10.7.2How long has this been happening for?
Restart your computer for now. -
Hi there,
I used the following manual (http://manuals.info.apple.com/MANUALS/1000/MA1583/en_US/boot_camp_install-setup_ 10.7.pdf) in attempt to install windows 7 onto my mac but I get an error at Step 3 - windows installation process
I selected the BOOTCAMP partitioned drive as mentioned, clicked the advance options, and then reformatted that drive. What happens next is the drive changes name from BOOTCAMP to 'untitled'. I then tried to click 'next' button but it won't let me proceed any further and didn't state clearly why it couldn't go through (instead says to check the log file for reason why - but then I have not clue where this log file is located in as well!).
I had a look at that partitioned drive after to find that it is NTFS format (when I went back to OS x) so it appears that I am doing the right thing so that shouldn't be the issue..
Does anyone know what could be wrong? or what I should try to do next?
Could it be a format error because when i click onto the 'untitled' drive, there is nothing in there.Hi Steve1904,
So you have use the backup and Restore to restore your files from Windows XP to Windows 7 directly?
This should be considered not work.
If you would like to transfer files between Windows XP and Windows 7, you need another tool called Windows Easy Transfer.
See the article below if you would like to upgrade from Windows XP to Windows 7:
Upgrading from Windows XP to Windows 7
If possible, follow the steps there, then things should be OK.
Best regards
Michael Shao
TechNet Community Support -
Disable next button until user click an object button (captivate 6)
I would like to disable the next button on a slide until the user clicks on a certain object.
I also would like to show a warning pop up message that appears and disappear when the user clicks next button before clicking the required object.
Thanks!
JayBut you want the Next button to be visible?
What is that ' certain object'? Can you turn it into an interactive object, which is possible with smart shapes? Create a user variable v_click with a default value of 0. To the 'object' that has become interactive, add the standard action 'Assign v_click with 1'. The value of that variable will be checked in the conditional action that is attached to the Next Button.
For the Next button create this conditional action:
IF v_click is equal to 0
Show popup message
ELSE
Hide popup message
Go to Next Slide
Lilybiri
Maybe you are looking for
-
"The connection with the server was reset" Error Message
I am trying to download iTunes 8 for my new iPod that i got today. However, when i am downloading the iTunesSetup.exe file, the file downloads normally until it gets to about 10.5MB. After this a message pops up saying: "Internet Explorer cannot down
-
NO AUDIO - (Late 2013) iMac with Windows 7 64-bit
Hey everyone, I have been scouring the forums to find something that will help me, but I have yet to find anything that works. Here is my problem: I recently installed Windows 7 64-bit using bootcamp on my (Late 2013) 27" iMac. I have the latest driv
-
HT1904 How do i find the agree button on the terms and condition in the apples store
Help me pls thanks a lot...,.
-
An error occurred while trying to add printer
when i try to add my usb connected hp deskjet f4135 all-in-one printer from my available list i get an error message "client=error-request-value-too-long" Please can anybody tell me what im doing wrong Message was edited by: evilways
-
Subdomain to separate website URL
I have a URL unitedsecurityfinancial.com hosted with NameBright with nameservers going through BusinessCatalyst and a company we hired to manage servicing of our mortgages provided us with a website that we can have our borrowers log in to view their