Flash Islands - transfer data only once from WDA to Flex component

Hi Experts,
I have defined some GACProperties to configure my Flex component within my WDA application. I need this data to initialize the Flex component but I'd like to somehow stop transfering this data after the initialization to avoid useless communication.
Does anyone know how to achieve this?
Regards,
Pierre

Hello Pierre,
AS you might be knowing already, the data transfer from WD to Flex happens whenever there is a change in the context nodes or when ever there is an interaction from Flex to WD(When FireEvent is called).
This we cant stop as this is the standard behavior.
In our application what we did to stop this is, we have created an attribute 'IS_UPDATE_REQUIRED' in the context of type WDY_BOOLEAN. And set this to true by default. And we created a GACProperty and bound that to the context attribute 'IS_UPDATE_REQUIRED'.
And for all the data which you are sending to Flex, you need to create setter methods instead of using public properties.
And the GACProperty for 'IS_UPDATE_REQUIRED' should be first one to be declared in the VIEW LAYOUT. In the setter method for that property, we read value and store it in a flex local variable isUpdateRequired. And in all other setter methods, check the value of that variable first. And only if its true, read the values for other properties. Otherwise dont do anything. And in the Last setter method, we need to set the context attribute IS_UPDATE_REQUIRED to false.
By doing this, whenever the data transfer happens next time, since the value of isUpdateRequired would be false, the read wont be read.
Hope am a clear!
Best Regards,
Srilatha

Similar Messages

  • I'm trying to transfer data (docs, emails) from G4 iMac running os 10.3.9 to brand new iMac on 10.8.1  I'm stuck, any help greatly appreciated.  (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)

    I'm trying to transfer data (docs, emails) from an old G4 iMac running OS 10.3.9 to brand new iMac on 10.8.1  I'm stuck, any help greatly appreciated.  (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)

    AMoriyama wrote:
    I have the old machine backed up onto an external firewire disk but can't hook that up to the new imac as I'm waiting for delivery of a firewire 400/800 adaptor - therefore starting the old machine up as a slave is also subject to the same delay.
    I was hoping there might be some way to create a network between the 2 machines (and 2 different versions of the OS) to be able to transfer data across immediately but perhaps I'll just have to wait for my firewire adaptor to arrive.
    I don't understand why you're buying a Firewire adaptor, since AFAIK both of your computers have Firewire already built in.
    All you need is a firewire cable. Connect the Firewire socket on the old machine to the Firewire socket on your new iMac.
    Then start the old machine in Target Mode (i.e. by holding down the T key on its keyboard, while it's starting up, until you see the three-legged T icon hopping around the screen of the old machine.)
    At that point you will also see a new icon on the screen of your new iMac. This is the hard drive of your old machine.  By clicking on it you can navigate through it any way you like, just as you would normally.
    Just drag across whatever you want from the old computer to the new one. This will leave everything on the old computer untouched.
    - or use Migration Assistant but in my experience, Migration Assistant isn't very reliable and fails to migrate large amounts of stuff.

  • Can I use a simless iPhone 6 Plus and put in a iPad data only sim from Verizon?

    Can I use a simless iPhone 6 Plus and put in a iPad data only sim from Verizon?

    You can but you will not be able to make or receive phone calls.

  • TS3992 how do i transfer data and pics from iphone 4s to iphine 5s

    How do I transfer pics, data and apps from my iphone 4S to my new iphone 5S?

    Hi Julia,
    Thank you for using Apple Support Communities.
    Probably the easiest way to transfer your iTunes Store purchases is to simply download them to the computer by using iTunes in the Cloud.
    Download past purchases - Apple Support
    The other option is to transfer your purchases by following the direactions in the article below.
    Re-download or transfer your iTunes Store purchases from an iPhone, iPad or iPod to a computer - Apple Support
    Cheers,
    Alex H.

  • Java:comp/env namespace is only available from within a J2EE component

    Can someone help me to explain and resolve the Exception?
    The Exception is like below:
    javax.naming.NamingException: java:comp/env namespace is only available from within a J2EE component

    Hi temp,
    I can only guess here -- since you haven't provided much information,
    but if you are trying to lookup an EJB from some client class, then
    the client class must also be deployed to OC4J in order to use the
    "java:comp/env" namespace.
    I think if you did a search of this forum's archives for the text
    "java:comp/env", it would probably explain lots of things to you.
    Good Luck,
    Avi.

  • Want to transfer data via idocs from one  R/3 to different R/3

    Hi!!
    May i hav nay step by step pdf which gives the complete flow of how to transfer idocs from from one  R/3 to different R/3.
    Though i have the basics steps but some where I m stuck.
    Also I have two doubts::
    1.Is thr Any relation bw port name and Logical System name?Can they be same.??I  hav kept Logical System name as SAPE60 AND PORT name also as SAPE60(in e60) and  SAPEI6(in ei6) servers respectively.
    2.Should the Logical System names be maintained same in both the servers??
    Kindly respond .
    Helpful answers will be rewarded points!!!

    Hi Deepika ,
    See the Example scenarios
    MASTER DATA TRANSFERMATION BETWEEN 2 DIFF CLIENTS
    •     For this scenario Client 800 is the Sender and 810 is the receiving system
    1. Creating Logical Systems
    o     Login using 800 client
    o     Go to T. Code SALE
    o     Expand Sending and Receiving Systems
    o     Expand Logical Systems
    o     Click on Define Logical System
    o     Click on New Entries
    o     Create STUD_S, STUD_R Logical Systems
    o     Save and come back
    o     Assign the STUD_S Logical System to client 800
    o     Assign the STUD_R Logical System to client 810
    2. Creating the RFCs
    o     Go to T. Code SM59
    o     Expand R/3 Connections
    o     Enter RFC Name as STUD_S
    o     Connection Type as 3
    o     Language as EN
    o     Client as 800
    o     User as  SAPUSER
    o     PWD as abap
    o     Target host as sap
    o     Click on Remote logon button to test the RFC
    o     Enter RFC Name as STUD_R
    o     Connection Type as 3
    o     Language as EN
    o     Client as 800
    o     User as  SATISH
    o     PWD as abap
    o     Target host as sap
    o     Click on Remote logon button to test the RFC
    3. Creating the Message Type
    o     Go to T. Code WE81
    o     Click on change, continue
    o     Click on New Entries button
    o     Give message type as ZBAPI_STUD_MAS and description
    o     Save and back
    4. Creating the Segment
    o     Go to T. Code WE31
    o     Give segment name as ZBAPI_STUD_SEG
    o     Enter Short Text
    o     Enter the Field Name and Data Element in the text boxes
    o     Save, continue,
    o     Click on Edit -> Set Release.
    5. Creating the Basic IDOC Object
    o     Go to T. code WE30
    o     Give obj. name as ZBAPI_STUD_IDOC
    o     Click on create
    o     Select create new radio button, give description and continue
    o     Select the IDOC obj name and click on create button
    o     Enter the segment name which is create earlier
    o     Select the check box if you want to make the segment mandatory
    o     Enter 1 in minimum number 99999 in maximum number, continue
    o     Save and back
    o     Click on Edit -> Set Release
    6. Creating Customer Distribution Model
    o     Go to T. Code BD64
    o     Click on change and Create model view button
    o     Enter the short text and Technical name as ZSTUDENT
    o     Select the model and click on Add Message Type Button
    o     Give the Sender as STUD_S,
    o                    Receiver as STUD_R,
    o                    Message Type as ZBAPI_STUD_MAS
    o     Select the model view & click on Environment -> Generate Partner Profiles
    o     Select Transfer IDOC Immediately and Trigger Immediately radio buttons
    o     Click on Execute
    o     You should get a list in green color which means it executed successfully.
    o     Back to main screen, select the model view
    o     Click Edit->Model view->Distribute
    o     Click on continue
    o     You should get a list saying model view is distributed successfully.
    7. Checking the Port
    o     Go to T. Code WE21
    o     Expand Transactional RFC
    o     Find the port from the list which is created using BD64 for STUD_R (Receiving system) RFC Destination.
    8. Checking the Partner Profiles.
    o     Go to T. Code WE20
    o     Expand Partner Type LS
    o     Select the Partner profile STUD_R
    o     Double click on Message Type ZBAPI_STUD_MAS in Outbound parmtrs.
    o     Check Receiver Port is assigned correctly
    o     Check the Basic type as your Basic IDOC object.
    9. Assigning the Message Type to Basic IDOC Object
    o     Go to T. Code WE82
    o     Click on Change & continue, New Entries button
    o     Give the Message type as ZBAPI_STUD_MAS
    o     Give Basic Type as ZBAPI_STUD_IDOC
    o     Release as 46C
    o     Save and back
    10. Creating Inbound Function Module (Posting Program)
    o     Go to T. Code SE37
    o     Create a function Module IDOC_INPUT_ZBAPI_STUD_MAS
    o     Set the Processing type as Remote Enabled Module and mode as start immed, in Attributes Tab.
    o     Import Parameters
    INPUT_METHOD                 LIKE     BDWFAP_PAR-INPUTMETHD
    MASS_PROCESSING     LIKE     BDWFAP_PAR-MASS_PROC
    NO_APPLICATION_LOG     LIKE     SY-DATAR
    MASSSAVEINFOS                 LIKE     MASSSAVINF
    o     Export Parameters
    WORKFLOW_RESULT          LIKE     BDWF_PARAM-RESULT
    APPLICATION_VARIABLE     LIKE     BDWF_PARAM-APPL_VAR
    IN_UPDATE_TASK          LIKE     BDWFAP_PAR-UPDATETASK
    CALL_TRANSACTION_DONE  LIKE     BDWFAP_PAR-CALLTRANS
    o     Tables
    IDOC_CONTRL     LIKE     EDIDC
    IDOC_DATA          LIKE     EDIDD
    IDOC_STATUS     LIKE     BDIDOCSTAT
    RETURN_VARIABLES     LIKE     BDWFRETVAR
    SERIALIZATION_INFO     LIKE     BDI_SER
    o     Exceptions
    WRONG_FUNCTION_CALLED
    o     Source Code
    DATA: FIRST_TRANC LIKE MARA_UEB-TRANC,
          ZBAPI_STUD_SEG like zbapi_stud.
    DATA: ZBAPI_STUD LIKE ZBAPI_STUD.
      DATA: I_ZBAPI_STUD LIKE ZBAPI_STUD.
      DATA: C_TRUE                         VALUE 'X'.
      DATA: C_FALSE                        VALUE ' '.
    DATA: BEGIN OF T_IDOC_ROLLNO OCCURS 0,
            DOCNUM LIKE EDIDC-DOCNUM,
            ROLLNO LIKE ZBAPI_STUD-ROLLNO,
          END   OF T_IDOC_ROLLNO.
      DEFINE APPEND_RESFIELDS.
        PERFORM APPEND_RES_FIELDS TABLES T_MFIELDRES
                                         T_RES_FIELDS
                                  USING  &1
                                         COUNTER-D_IND.
      END-OF-DEFINITION.
      DATA: I_MARA_UEB LIKE MARA_UEB.
      DATA: I_ZSTUD_UEB LIKE ZBAPI_STUD.
      DATA: I_MAKT_UEB LIKE MAKT_UEB.
      DATA: I_MARC_UEB LIKE MARC_UEB.
      DATA: I_MARD_UEB LIKE MARD_UEB.
      DATA: I_MFHM_UEB LIKE MFHM_UEB.
      DATA: I_MARM_UEB LIKE MARM_UEB.
      DATA: I_MEAN_UEB LIKE MEA1_UEB.
      DATA: I_MBEW_UEB LIKE MBEW_UEB.
      DATA: I_STEU_UEB LIKE STEU_UEB.
      DATA: I_STEUMM_UEB LIKE STEUMM_UEB.
      DATA: I_MLGN_UEB LIKE MLGN_UEB.
      DATA: I_MLGT_UEB LIKE MLGT_UEB.      " //br010797 neu zu 4.0
      DATA: I_MPGD_UEB LIKE MPGD_UEB.
      DATA: I_MPOP_UEB LIKE MPOP_UEB.
      DATA: I_MVEG_UEB LIKE MVEG_UEB.
      DATA: I_MVEU_UEB LIKE MVEU_UEB.
      DATA: I_MVKE_UEB LIKE MVKE_UEB.
      DATA: I_MPRW_UEB LIKE MPRW_UEB.
      DATA: I_LTX1_UEB LIKE LTX1_UEB.
      DATA: HELP_MARC_UEB LIKE MARC_UEB.
      DATA: T_MARA_UEB LIKE MARA_UEB OCCURS 0.
      DATA: T_MAKT_UEB LIKE MAKT_UEB OCCURS 0.
      DATA: T_MARC_UEB LIKE MARC_UEB OCCURS 0.
      DATA: T_MARD_UEB LIKE MARD_UEB OCCURS 0.
      DATA: T_MFHM_UEB LIKE MFHM_UEB OCCURS 0.
      DATA: T_MARM_UEB LIKE MARM_UEB OCCURS 0.
      DATA: T_MEAN_UEB LIKE MEA1_UEB OCCURS 0.
      DATA: T_MBEW_UEB LIKE MBEW_UEB OCCURS 0.
      DATA: T_STEU_UEB LIKE STEU_UEB OCCURS 0.
      DATA: T_STEUMM_UEB LIKE STEUMM_UEB OCCURS 0.
      DATA: T_MLGN_UEB LIKE MLGN_UEB OCCURS 0.
      DATA: T_MLGT_UEB LIKE MLGT_UEB OCCURS 0.    " //br010797 neu zu 4.0
      DATA: T_MPGD_UEB LIKE MPGD_UEB OCCURS 0.
      DATA: T_MPOP_UEB LIKE MPOP_UEB OCCURS 0.
      DATA: T_MVEG_UEB LIKE MVEG_UEB OCCURS 0.
      DATA: T_MVEU_UEB LIKE MVEU_UEB OCCURS 0.
      DATA: T_MVKE_UEB LIKE MVKE_UEB OCCURS 0.
      DATA: T_MPRW_UEB LIKE MPRW_UEB OCCURS 0.
      DATA: T_LTX1_UEB LIKE LTX1_UEB OCCURS 0.
    Internal fields/ tables
    DATA: FLAG_ERROR_HAPPENED.
    DATA: flag_material_exists. "//br210397 zu 4.0 keine Verwendung mehr
      DATA: FLAG_EXIT_TO_BE_DONE.
      DATA: HELP_TABIX LIKE SY-TABIX.
      DATA: HELP_TRANC LIKE MARA_UEB-TRANC.
      DATA: HELP_ALAND LIKE STEU_UEB-ALAND.
      DATA: HELP_VKORG LIKE MVKE-VKORG.
      DATA: HELP_WERKS LIKE T001W-WERKS.
      DATA: HELP_LFDNR LIKE STEU_UEB-LFDNR.
      DATA: LAST_MARC_TRANC LIKE MARA_UEB-TRANC.
      DATA: LAST_MLGN_TRANC LIKE MARA_UEB-TRANC.    " //br010797 neu zu 4.0
      DATA: LAST_TEXT_TRANC LIKE MARA_UEB-TRANC.
      DATA: CURRENT_TABIX LIKE SY-TABIX.
      DATA: GENERAL_SUBRC LIKE SY-SUBRC.
      DATA: HELP_FACTOR TYPE P DECIMALS 3.
      DATA: USER_SEGMENTS LIKE EDIDD OCCURS 0 WITH HEADER LINE.  " insert
      DATA: CUST_SEGMENT LIKE EDIDD.
      DATA: I_MFIELDRES LIKE MFIELDRES.
    DATA: I_MERRDAT LIKE MERRDAT.
      DATA: I_EDIDD LIKE EDIDD.
                                           " //br neu zu 3.1g
      DATA: T_RES_FIELDS LIKE DELFIELDS OCCURS 0 WITH HEADER LINE.
      DATA: T_MFIELDRES LIKE MFIELDRES OCCURS 0.
      DATA: T_MERRDAT LIKE MERRDAT OCCURS 0.
      DATA: T_EDIDD LIKE EDIDD OCCURS 0.
    DATA: BEGIN OF t_matnr OCCURS 0, "//br210397 zu 4.0
            matnr LIKE mara-matnr,   " wird nicht mehr verwendet
          END OF t_matnr.            "
      DATA: BEGIN OF COUNTER,
              TRANC LIKE MARA_UEB-TRANC,
              D_IND LIKE MARA_UEB-D_IND,
            END OF COUNTER.
    DATA: BEGIN OF t_idoc_tranc OCCURS 0,                          " 4.0
            docnum LIKE edidc-docnum,                              "
            tranc  LIKE mara_ueb-tranc,                            "
          END OF t_idoc_tranc.                                     "
      DATA T_IDOC_TRANC LIKE MATIDOCTRANC OCCURS 0 WITH HEADER LINE."
      DATA: FLAG_FITS.
      DATA: APPLICATION_SUBRC LIKE SY-SUBRC.
      DATA FLAG_MUSS_PRUEFEN LIKE SY-DATAR.
      DATA MAX_ERRORS LIKE T130S-ANZUM.    " 4.0
    note 419281
      DATA : FLG_MASS.
      CLEAR : FLG_MASS.
      FIELD-SYMBOLS: .            " 4.0
    ALE-distribution unity : IDOC status set by locking      "note0361838
      data:                                                     "note0361838
        it_dsp_idocstat like bdidocstat                         "note0361838
          occurs 0 with header line.                            "note0361838
    Initialize data - general
      REFRESH T_MFIELDRES.
      REFRESH T_IDOC_TRANC.
      REFRESH T_IDOC_TRANC.                "JH/02.02.98/4.0C  KPr100004993
    REFRESH t_idoc_tranc_segment.   " //br 40 : unnötig
    REFRESH matnr_tranc.            "    -"-
    REFRESH t_matnr.
      COUNTER-TRANC = 1.
      COUNTER-D_IND = 1.
      REFRESH T_MARA_UEB.
      REFRESH T_MAKT_UEB.
      REFRESH T_MARC_UEB.
      REFRESH T_MARD_UEB.
      REFRESH T_MFHM_UEB.
      REFRESH T_MARM_UEB.
      REFRESH T_MEAN_UEB.
      REFRESH T_MBEW_UEB.
      REFRESH T_STEU_UEB.
      REFRESH T_STEUMM_UEB.
      REFRESH T_MLGN_UEB.
      REFRESH T_MLGT_UEB.                  " //br010797 neu zu 4.0
      REFRESH T_MPGD_UEB.
      REFRESH T_MPOP_UEB.
      REFRESH T_MVEG_UEB.
      REFRESH T_MVEU_UEB.
      REFRESH T_MVKE_UEB.
      REFRESH T_MPRW_UEB.
    REFRESH VKORG_ALAND.
    REFRESH WERKS_ALAND.
      CLEAR APPLICATION_SUBRC.
      REFRESH T_MERRDAT.
    Check if right function is called
      READ TABLE IDOC_CONTRL INDEX 1.
      IF SY-SUBRC <> 0.
        EXIT.
      ELSE.
        IF  IDOC_CONTRL-IDOCTP <> 'ZBAPI_STUD_IDOC'.
          RAISE WRONG_FUNCTION_CALLED.
        ENDIF.
      ENDIF.
      LOOP AT IDOC_CONTRL.
      Initialize data - per IDOC
      t_idoc_tranc-docnum = counter-tranc.
        T_IDOC_TRANC-DOCNUM = IDOC_CONTRL-DOCNUM.
        T_IDOC_TRANC-FIRST_TRANC_IDOC = COUNTER-TRANC + 2.
        APPEND T_IDOC_TRANC.
      Select segments which belong to IDOC
        REFRESH T_EDIDD.
        LOOP AT IDOC_DATA WHERE DOCNUM = IDOC_CONTRL-DOCNUM.
          APPEND IDOC_DATA TO T_EDIDD.
        ENDLOOP.
       BUSINESS TRANSACTION EVENT (header / data)         "note0388000
         call function 'OPEN_FI_PERFORM_MGV00200_E'         "note0388000
              exporting                                     "note0388000
                  idoc_header       = idoc_contrl           "note0388000
                  FLG_APPEND_STATUS = 'X'                   "note0388000
              tables                                        "note0388000
    (DEL)       idoc_data         = idoc_data "note0388000 note0418561
                  idoc_data         = t_edidd               "note0418561
                  idoc_status       = idoc_status           "note0388000
              exceptions                                    "note0388000
                  others       = 1.                         "note0388000
         if sy-subrc = 1.                                   "note0388000
            continue.                                       "note0388000
         endif.                                             "note0388000
      Within one IDOC: loop through data segments:
      Prepare internal tables for the current material
        LOOP AT T_EDIDD INTO IDOC_DATA.
        Transform from CoreData to Normal Data if necesary
          CASE IDOC_DATA-SEGNAM.
           WHEN 'E1MARAC'.
    *--COMMENTED BY SATISH
             PERFORM MOVE_E1MARAC_TO_E1MARAM USING IDOC_DATA.
           WHEN 'E1MAKTC'.
             PERFORM MOVE_E1MAKTC_TO_E1MAKTM USING IDOC_DATA.
    *--COMMENTES ENDED BY SATISH
             WHEN 'ZBAPI_STUD_SEG'.
              PERFORM MOVE_E1MARAC_TO_E1MARAM USING IDOC_DATA.
                CLEAR I_ZBAPI_STUD.
    Second: Move E1MARAC into E1MARAM
                I_ZBAPI_STUD = IDOC_DATA-SDATA.
    Third: Move E1MARAM back into IDOC-line
                IDOC_DATA-SDATA =  I_ZBAPI_STUD.
                IDOC_DATA-SEGNAM = 'ZBAPI_STUD_SEG'.
          ENDCASE.
          CURRENT_TABIX = SY-TABIX.
          COUNTER-D_IND = COUNTER-D_IND + 1.
          COUNTER-TRANC = COUNTER-TRANC + 2.
          CASE IDOC_DATA-SEGNAM.
             WHEN 'ZBAPI_STUD_SEG'.
            Initialize data - per material
              COUNTER-D_IND = 1.
              FIRST_TRANC = COUNTER-TRANC.
            interpret segment
              ZBAPI_STUD_SEG = IDOC_DATA-SDATA.
              MOVE-CORRESPONDING ZBAPI_STUD TO I_ZSTUD_UEB.
              T_IDOC_ROLLNO-DOCNUM  = IDOC_CONTRL-DOCNUM.
              T_IDOC_ROLLNO-ROLLNO  = I_ZSTUD_UEB-ROLLNO.
              APPEND T_IDOC_ROLLNO.
           ENDCASE.
                if not ZBAPI_STUD_SEG is initial.
                 ZBAPI_STUD-MANDT  = ZBAPI_STUD_SEG-MANDT.
                 ZBAPI_STUD-ROLLNO = ZBAPI_STUD_SEG-ROLLNO.
                 ZBAPI_STUD-FNAME  = ZBAPI_STUD_SEG-FNAME.
                 ZBAPI_STUD-LNAME  = ZBAPI_STUD_SEG-LNAME.
                  INSERT ZBAPI_STUD FROM ZBAPI_STUD_SEG.
                  COMMIT WORK.
                ENDIF.
    *-- ALE ditribution unity : update IDOC status                "note03618
          LOOP AT it_dsp_idocstat.                                  "note036
             LOOP AT IDOC_STATUS WHERE DOCNUM = it_dsp_idocstat.    "note036
                DELETE idoc_status INDEX sy-tabix.                  "note036
             ENDLOOP.                                               "note036
             APPEND it_dsp_idocstat TO idoc_status.                 "note036
          ENDLOOP.                                                  "note036
    *--GENERATING THE IDOC STATUS
      PERFORM HANDLE_ERROR_EXT             " //br40
                  TABLES                                        "
                     IDOC_CONTRL                                "
                     IDOC_STATUS                                "
                     RETURN_VARIABLES                           "
                     T_MERRDAT                                  "
                     T_IDOC_TRANC                               "
                     T_IDOC_ROLLNO          "JH/4.0C/KPr100004993
                  USING                                         "
                     GENERAL_SUBRC                              "
                     NO_APPLICATION_LOG                         "
                     MASSSAVEINFOS         "wk/40c
                  CHANGING                                      "
                     WORKFLOW_RESULT.                           "
                  PERFORM HANDLE_ERROR
                              TABLES
                                 IDOC_CONTRL
                                 IDOC_STATUS
                                 RETURN_VARIABLES
                                 T_MERRDAT
                                 T_IDOC_ROLLNO     "JH/4.0C/KPr100004993
                              USING
                                 APPLICATION_SUBRC
                              CHANGING
                                 WORKFLOW_RESULT.
      SORT T_IDOC_ROLLNO BY ROLLNO. "note 315124
    React on general error
      DATA: I_MERRDAT LIKE MERRDAT.
      IF GENERAL_SUBRC <> 0.
        I_MERRDAT-MSGTY = 'E'.
        I_MERRDAT-MSGID = SY-MSGID.
        I_MERRDAT-MSGNO = SY-MSGNO.
        I_MERRDAT-MSGV1 = SY-MSGV1.
        I_MERRDAT-MSGV2 = SY-MSGV2.
        I_MERRDAT-MSGV3 = SY-MSGV3.
        I_MERRDAT-MSGV4 = SY-MSGV4.
        APPEND I_MERRDAT TO T_MERRDAT.
      ENDIF.
      LOOP AT T_MERRDAT INTO  I_MERRDAT
                        WHERE MSGTY = 'S'  "success
                        OR    MSGTY = 'D'  "dummy
                        OR    MSGTY = 'I'  "Information " //br011097 zu 3.1I
                        OR    MSGTY = 'H'  "dummy       " 4.0
                        OR    MSGTY = 'W'. "warning
        DELETE T_MERRDAT.
      ENDLOOP.
        ENDLOOP.
      ENDLOOP.
    ENDFUNCTION.
    *&      Form  handle_error_ext
    FORM HANDLE_ERROR_EXT
            TABLES
               IDOC_CONTRL                   STRUCTURE EDIDC
               IDOC_STATUS                   STRUCTURE BDIDOCSTAT
               RETURN_VARIABLES              STRUCTURE BDWFRETVAR
               T_MERRDAT                     STRUCTURE MERRDAT
               IDOC_TRANC                    STRUCTURE MATIDOCTRANC
    JH/02.02.98/4.0C  KPr100004993 (Anfang)
               T_IDOC_ROLLNO                 STRUCTURE T_IDOC_ROLLNO
    JH/02.02.98/4.0C  KPr100004993 (Ende)
            USING
               GENERAL_SUBRC                 LIKE SY-SUBRC
               NO_APPLICATION_LOG            LIKE SY-DATAR
               MASSSAVEINFOS                 LIKE MASSSAVINF
            CHANGING
               WORKFLOW_RESULT               LIKE BDWF_PARAM-RESULT.
      DATA FLAG_ERROR_HAPPENED.
      DATA I_MERRDAT LIKE MERRDAT.
      DATA IDOC_INDEX_2_SUBRC LIKE SY-SUBRC.
      DATA AL_HANDLES TYPE BAL_T_LOGH. "//br99
      SORT T_IDOC_ROLLNO BY ROLLNO.                        "note 315124
    React on general error
      IF GENERAL_SUBRC <> 0.
        REFRESH T_MERRDAT.
      i_merrdat-tranc = 0.                              " //br261197
        READ TABLE IDOC_TRANC INDEX 1.     " zu 40b
        I_MERRDAT-TRANC = IDOC_TRANC-FIRST_TRANC_IDOC.          "
        I_MERRDAT-MSGTY = 'E'.
        I_MERRDAT-MSGID = SY-MSGID.
        I_MERRDAT-MSGNO = SY-MSGNO.
        I_MERRDAT-MSGV1 = SY-MSGV1. I_MERRDAT-MSGV2 = SY-MSGV2.
        I_MERRDAT-MSGV3 = SY-MSGV3. I_MERRDAT-MSGV4 = SY-MSGV4.
        APPEND I_MERRDAT TO T_MERRDAT.
      ENDIF.
    DATA: C_TRUE,
          C_FALSE VALUE 'X'.
    If error happened ==> Rollback whole work....
      LOOP AT T_MERRDAT INTO I_MERRDAT WHERE MSGTY NA 'SDHWI'.
        EXIT.
      ENDLOOP.
      IF SY-SUBRC = 0.
        FLAG_ERROR_HAPPENED = C_TRUE.
        ROLLBACK WORK.
      ELSE.
        FLAG_ERROR_HAPPENED = C_FALSE.
      ENDIF.
    Set IDOC status
    two cases:
    single IDOC-processing: ==> error can be written in IDOC status
    package processing ==> anononymous "package error" for all IDOCs
      READ TABLE IDOC_CONTRL INDEX 2.
      IDOC_INDEX_2_SUBRC = SY-SUBRC.
      IF SY-SUBRC = 0.
        IF 1 = 2.                          "//br40
          MESSAGE E051(B1).                                     "
        ENDIF.                                                  "
        CLEAR I_MERRDAT.
        I_MERRDAT-MSGID = 'B1'.
        I_MERRDAT-MSGTY = 'E'.
        I_MERRDAT-MSGNO = '051'.
      ENDIF.
      IF IDOC_INDEX_2_SUBRC NE 0 OR FLAG_ERROR_HAPPENED = C_FALSE.
      Nur in diesen Fällen wird Application Log geschrieben
      Delete all Successes and Dummy records from t_merrdat
      DELETE t_merrdat WHERE msgty = 'S'  "success         " testweise
                       OR    msgty = 'D'. "dummy           "
        LOOP AT T_MERRDAT INTO I_MERRDAT WHERE MSGTY = 'D'.     "
          I_MERRDAT-MSGTY = 'S'.                                "
          MODIFY T_MERRDAT FROM I_MERRDAT.                      "
        ENDLOOP.                                                "
      ENDIF.
      WORKFLOW_RESULT = 0.
      LOOP AT IDOC_CONTRL.
      Set IDOC status
        CLEAR IDOC_STATUS.
        IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
        IF FLAG_ERROR_HAPPENED = C_FALSE.
    Application log
          PERFORM WRITE_APPL_LOG TABLES IDOC_TRANC
                                        T_MERRDAT
                                        IDOC_STATUS
                                 USING  IDOC_CONTRL
                                        FLAG_ERROR_HAPPENED
                                        NO_APPLICATION_LOG
                                        MASSSAVEINFOS
                                        AL_HANDLES.
        idoc_status-status = '53'.       "OK!
        APPEND idoc_status.
    JH/02.02.98/4.0C  KPr100004993 (Anfang)
        Fill Return variables
          CLEAR RETURN_VARIABLES.
          RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
          RETURN_VARIABLES-WF_PARAM = 'Processed_IDOCs'.
          APPEND RETURN_VARIABLES.
        Verknüpfungseintrag anlegen
          READ TABLE T_IDOC_ROLLNO WITH KEY ROLLNO = IDOC_CONTRL-DOCNUM
                                  BINARY SEARCH.
          IF SY-SUBRC = 0.
            RETURN_VARIABLES-DOC_NUMBER = T_IDOC_ROLLNO-ROLLNO.
            RETURN_VARIABLES-WF_PARAM = 'Appl_Objects'.
            APPEND RETURN_VARIABLES.
          ENDIF.
    JH/02.02.98/4.0C  KPr100004993 (Ende)
        ELSE.
          IF IDOC_INDEX_2_SUBRC NE 0.
    Application Log
            PERFORM WRITE_APPL_LOG TABLES IDOC_TRANC
                                          T_MERRDAT
                                          IDOC_STATUS
                                   USING  IDOC_CONTRL
                                          FLAG_ERROR_HAPPENED
                                          NO_APPLICATION_LOG
                                          MASSSAVEINFOS
                                          AL_HANDLES.
          ELSE.
            IDOC_STATUS-MSGID = I_MERRDAT-MSGID.
            IDOC_STATUS-MSGTY = I_MERRDAT-MSGTY.
            IDOC_STATUS-MSGNO = I_MERRDAT-MSGNO.
            IDOC_STATUS-MSGV1 = I_MERRDAT-MSGV1.
            IDOC_STATUS-MSGV2 = I_MERRDAT-MSGV2.
            IDOC_STATUS-MSGV3 = I_MERRDAT-MSGV3.
            IDOC_STATUS-MSGV4 = I_MERRDAT-MSGV4.
            IDOC_STATUS-STATUS = '51'.     "ERROR!
            APPEND IDOC_STATUS.
          ENDIF.
        Fill Return variables
          CLEAR RETURN_VARIABLES.
          RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
        return_variables-wf_param = c_wf_par_processed_idocs.
          RETURN_VARIABLES-WF_PARAM = 'Error_IDOCs'.
          APPEND RETURN_VARIABLES.
          WORKFLOW_RESULT = 99999.
        ENDIF.
      APPEND idoc_status.
      ENDLOOP.
      IF NO_APPLICATION_LOG IS INITIAL.
        CALL FUNCTION 'BAL_DB_SAVE'                           "//br99
             EXPORTING
                  I_IN_UPDATE_TASK = ' '
                  I_SAVE_ALL       = ' '
                  I_T_LOG_HANDLE   = AL_HANDLES.
           EXCEPTIONS
                LOG_NOT_FOUND    = 1
                SAVE_NOT_ALLOWED = 2
                NUMBERING_ERROR  = 3
                OTHERS           = 4.
        CALL FUNCTION 'BAL_GLB_MEMORY_REFRESH'                "//br99
             EXPORTING
                I_AUTHORIZATION          =
                  I_REFRESH_ALL            = ' '
                  I_T_LOGS_TO_BE_REFRESHED = AL_HANDLES.
           EXCEPTIONS
                NOT_AUTHORIZED           = 1
                OTHERS                   = 2
      ENDIF.
    ENDFORM.                               " handle_error
    Save, check and activate
    11. Assigning the Inbound Function Module to Basic Type & Message Type
    o     Go to T. Code WE57
    o     Click on change, continue, continue and New Entries Button
    o     Enter the Module as IDOC_INPUT_ZBAPI_STUD_MAS
    o     Type as “F”
    o     Basic Type as ZBAPI_STUD_IDOC
    o     Message Type as ZBAPI_STUD_MAS.
    o     Direction as 2
    o     Save and back
    Now Login in 810 client
    12. Assigning the Inbound Function Module in ALE Table
    o     Go to T. Code BD51
    o     Click on continue, New Entries button
    o     Give the Inbound Function Module IDOC_INPUT_ZBAPI_STUD_MAS
    o     Give Input t. as 0 (zero)
    o     Save and back
    13. Creating Process Code
    o     Go to T. Code WE42
    o     Click on Change, New Entries Button
    o     Give Process Code name as ZSTUD, give Description & Save
    o     Select Processing with ALE Services Radio button
    o     Select Processing by Function Module Radio button
    o     Click the ALE Table (arrow Icon) in Identification
    o     Give the Function Module Name ZIDOC_INPUT_ZBAPI_STUD_MAS
    o     Give maximum number of repeats 0
    o     Save and back, back
    o     Select the process code from the list & click on Logical Messages Icon
    o     Give the Message Type as ZBAPI_STUD_MAS
    o     Save & Back, Save & Back, Save & Back
    14. Changing the Customer Distribution model in Receiving system
    o     Go to T. Code BD64
    o     Click on change and Create model view button
    o     Select the model view & click on Environment -> Generate Partner Profiles
    o     Select Transfer IDOC Immediately and Trigger Immediately radio buttons
    o     Click on Execute
    o     You should get a list in green color which means it executed successfully.
    15. Assigning the Process Code to Message Type in Receiving System
    o     Go to T. Code WE20
    o     Expand Partner Type LS
    o     Select the Partner Profile STUD_S
    o     Double click on Message Type ZBAPI_STUD_MAS in Inbound parmtrs.
    o     Give the Process Code as ZSTUD
    o     Click on Trigger Immediately Radio button
    o     Save & Back
    o     Save & Back
    16. Creating the Selection Program (Outbound Program)
    •     Login in client 800.
    •     Go to T. Code SE38
    •     Create a Report Program as   ZSTUD_SEND with the following code
    REPORT ZSTUD_SEND
           NO STANDARD PAGE HEADING.
    TABLES: ZBAPI_STUD.
    DATA: IT_STUD LIKE ZBAPI_STUD OCCURS 0 WITH HEADER LINE.
    SELECTION-SCREEN:BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-H01.
    SELECT-OPTIONS: S_ROLLNO FOR ZBAPI_STUD-ROLLNO.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN:BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-H02.
    PARAMETERS:  P_MESTYP LIKE EDIDC-MESTYP,
                 P_RCVPRN LIKE TBDLST-LOGSYS.
    SELECTION-SCREEN:END OF BLOCK B2.
    SELECTION-SCREEN:END OF BLOCK B1.
    START-OF-SELECTION.
      PERFORM CREATE_STUDENT.
      PERFORM CREATE_IDOC.
    *&      Form  CREATE_STUDENT
          sending student
    FORM CREATE_STUDENT.
    SELECT * FROM ZBAPI_STUD
       INTO TABLE IT_STUD
       WHERE ROLLNO IN S_ROLLNO.
    ENDFORM.                    " CREATE_STUDENT
    *&      Form  CREATE_IDOC
          IDOC Creation
    FORM CREATE_IDOC.
    DATA : IMAS_DATA LIKE EDIDD OCCURS 10 WITH HEADER LINE,
           IMAS_CON LIKE EDIDC OCCURS 10 WITH HEADER LINE,
           ICOM_CON LIKE EDIDC OCCURS 10 WITH HEADER LINE.
    IMAS_CON-RCVPRT = 'LS'.
    IMAS_CON-RCVPRN = P_RCVPRN.
    IMAS_CON-IDOCTP = 'ZBAPI_STUD_IDOC'.
    IMAS_CON-MESTYP = P_MESTYP.
    IMAS_CON-DIRECT = 1.
    APPEND IMAS_CON.
    LOOP AT IT_STUD.
      IMAS_DATA-SEGNAM = 'ZBAPI_STUD_SEG'.
      IMAS_DATA-SDATA = IT_STUD.
      APPEND IMAS_DATA.
    ENDLOOP.
    CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
         EXPORTING
              MASTER_IDOC_CONTROL            = IMAS_CON
            OBJ_TYPE                       = ''
            CHNUM                          = ''
         TABLES
              COMMUNICATION_IDOC_CONTROL     = ICOM_CON
              MASTER_IDOC_DATA               = IMAS_DATA
       EXCEPTIONS
            ERROR_IN_IDOC_CONTROL          = 1
            ERROR_WRITING_IDOC_STATUS      = 2
            ERROR_IN_IDOC_DATA             = 3
            SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
            OTHERS                         = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    COMMIT WORK.
    LOOP AT  ICOM_CON.
      WRITE :/ 'IDOC: ', ICOM_CON-DOCNUM, 'CREATED SUCCESSFULLY'.
    ENDLOOP.
    ENDFORM.                    " CREATE_IDOC
    17. Transferring the student records from 800 to 810 client
    •     Execute Report Program   ZSTUD_SEND
    •     Give the Range of Roll Nos to Transfer
    •     Give Message Type as    ZBAPI_STUD_MAS
    •     Give Receiver Logical system as   STUD_R
    •     Execute
    •     You should get the IDOC Number
    •     Take the IDOC Number and go to T. Code WE05 & Execute
    •     In Outbox you can see the IDOC Status
    •     Select the status record in left side window
    •     Double click on the Status record in right side window
    •     You can see the Control Record, Data Record and Status Records for that IDOC
    •     If the ICON is green and the status code is 3, it means the IDOC is passed to PORT Successfully.
    Now Login in 810 client
    •     Go to T. Code WE05 & Execute
    •     You can see the status record in left side window
    •     If the status no is 53 and color is green, it means the IDOC is Posted to Application successfully.
    •     You can see the Log Information by double clicking on the status record in right side window.
    •     Now in left side window, you can see the Control Record, Data Record & Status Record of the IDOC
    •     Now go to T. Code SE16
    •     Give the table name ZBAPI_STUD & press F7
    •     See the contents of the table
    •     The table is updated with the students records transferred from 800 client with our selection program.
    Reward if useful
    Thanks
    Jagadeesh.G

  • How can I transfer dates and locations from excel file to iCal?

    I received an Excel file with dates and locations to visit for 45 days. Is there a way to transfer over to iCAL and then to iPhone?

    how to input all those addresses into my Garmin as well.
    I can't help you with that one.
    Could have I also input somehow from excel to entourage and then ical??
    I don't think Entourage has the data detectors feature.
    AK

  • Is there an easy way to transfer data to Imac from windows

    Ihave exported data files(Quicken) to a flash drive.  When I plug it into my Imac I can see the files but not able to highlight them.

    No I cannot,  Ihave one file able to be moved (addresses) nothing else on tje drive can be moved

  • Acquiring data only once while generating other data continously

    Hello,
    I am using Labview 2009 on windows 7 PC and I am using NI USB6009 for my application.
    In my vi I want to generate ramp voltage continously which I can in my current vi. But while doing this I will be connecting relay contact to other digital input. I want to store the generated ramp voltage at the instance when the relay closes its contact which I will know as it is connected to the digital input. The contact is going to remain closed for a while but the instance at which is closes is of value to me. I tried various things using case structures or even parallel while loops. but unfortunately I am not so much acquainted with event structures so I couldn't achieve what I wanted. Please help me out.
    Thanks
    Rohan
    Solved!
    Go to Solution.
    Attachments:
    ramp up.vi ‏20 KB

    Hi Rohan,
    pseudo-code:
    IF RisingEdge(digital input) THEN
    store current AO value in shift register
    ENDIF
     You need the PtByPt_BooleanCrossing function, a shift register and a select node…
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Sending Large amount of data (250 K +) from Oracle to flex client

    I have an oracle database with more than 250K rows of data that needs to be sent to the AdvancedDataGrid and Flex charts for runtime analysis. What would be and ideal solution to implement this?

    I would say paging would be the way to go, downloading 250K rows to a client is not sensible. Any analysis that may be required should be performed server-side. Dumping 250K data-points into a chart is also unlikely to be performant or necessary.
    You get paging with LCDS, and the new FlashBuilder 4 code generation features also support paging.

  • Transfer data from iphone 3g to ipad

    how to transfer data, contact list, from iphone 3g to an ipad

    Restore the iPad from the backup of the iPhone.
    iOS: How to back up
    you will have to reenter keychain items like passwords since those are only restored to the same device unless you use an encrypted backup.

  • HT1752 How do I transfer data from Power Macintosh 7200/90 to a state of the art Mac today?

    I have this old PowerMac, and want to transfer data to an updated iMac with OS X 10.8.5. How should that be done?

    The short answer is to turn on file sharing on the PowerMac, and then connect to it by going to Go>Connect to Server on the new Mac. You can do this either by connecting the PowerMac to your network hub or with a direct Cat 5 connection between the Macs. The latter is likely to be a bit more complicated. You can also enable FTP on the new Mac and transfer data to it from the old one.
    The long answer is going to depend on what version of Mac OS the PowerMac is running, and whether I can remember where in the menus the various settings are.
    There are some other, probably faster options, but they require hardware you're not likely to have. If you have a USB-SCSI adapter, you can boot the PowerMac into SCSI Disk Mode and make a disk image of the whole drive (which is 1.3GB uncompressed, at most). You can use a SCSI and a USB Zip drive if you have one of each, but what are the odds of that?
    All of the above is assuming you can boot and operate the PowerMac, and that you have a monitor, keyboard and mouse for it. If any part of that is not the case, then you're going to need some additional hardware.

  • Transfer data from Z screen to fv65

    Hello experts,
    I need to transfer data (4 fields) from z screen that we'd developed  to the standart transaction FV65, so that the user w'ont need to enter this fields in FV65. Is there BADI or USER EXIT that can help me?
    thanks,
    Yulia

    Hi Sandeep,
    There are multiple ways to pass your Z screen data to standard screen data.
    1. If you want to pass one are two values to standard transaction, you can use set Parameter ID and Call Transaction statements..
    2. If you want to create the complete Sales order information, Use Sales order creation BAPI to create the sales order.
    Please let me know if you need more information or close this thread by offiering the points( If you are satisfied).
    Regards,
    Sakthivel N

  • How transfer data from crome to firefox

    Trying firefox but want to transfer data, eg. favorates, from crome to firefox. Had no trouble going from IE to crome, file-transfer. Can't find simular in file.

    See:
    * http://kb.mozillazine.org/Import_bookmarks#From_Google_Chrome

  • Flash island: popup during install

    Hello all,
    We are using webdynpro ABAP with flash island. These WDA are displayed to users in a SAP portal.
    As a lot a users don't have enough authorizations on their PC to install applications. We would like to avoid the automatic popup asking for flash installation and to have instead a short message redirecting users to PC administrators.
    Well, my best solution for the moment is:
       - Raise an event in the WDA.
       - This event is catch in the masthead of the portal, the handler of this event check if the user has flash player installed or not.
       - This hanlder then fire an event with the result (flash or not) of this test as a parameter.
       - In the main view (initialization) of my WDA I have subscribed to this second event to get the resutl of the check (done in the portal due to javascript restriction in WDA).
       - Even if I map the enable property and visibility property of my flashisland container depending on the result of the test, I always have the install popup displayed if I don't have flash installed. Even if the portal eventing mechanisme is working (I don't have the flashisland displayed if I don't have flash installed).
    I have already played with some flash builder options around the generation of a wrapper. But don't find anything working for my requirement.
    Does someone already face the same issue/requirements and have a solution to solve this?
    Thanks,
    Olivier

    >Even if I map the enable property and visibility property of my flashisland container depending on the result of the test, I always have the install popup displayed if I don't have flash installed.
    That won't be enough to stop the Flash Plug-In from initializing. What I would suggest is that you set the dummy EMPTYVIEW as the default view of the ViewContainer that would normally hold the FlashIsland.  Then if you pass your check, fire a navigation plug to replace the EMPTYVIEW with the Flash Island View.  Only by not embedding the view at all can you avoid the Flash Player initialization.

Maybe you are looking for