Flash just doesn't work right, period.

Flash has multiple problems over ALL common browsers, including Chrome. Some browsers worse than others. Have the latest version.
Videos stutter constantly.
Videos just stop dead in their tracks. Restating gives me a few more minutes and then they may stop again (usually but not always).
Seems to be OK with standard videos. Problems are with HD videos.
Have plenty of bandwidth. Right now it is 28 mps. Using Vista (ugh). It is a laptop so cannot revert to XP. Wish I could. I have an unused full version of XP.
Wouldn't you think as a very old program that Adobe would have fixed everything by now (IF they cared to of course)? Unfortunately Flash is so ingrained that Adobe has a monopoly. So I doubt they will ever spend the bucks to fix it once and for all.

I just had the identical experience. Both laptop and desktop have the same prefs set from within iCal to sync my calendars and address books. I've synced (sunked?) three or four times now, it appears to be working, but when all is said and done I am left with totally blank calendar on my desktop unit. Both have the latest Leopard upgrades. I also selected "merge all data" when prompted.
What gives?

Similar Messages

Power Nap doesn't work right in my MBA mid 2011. Anyone knows why?

I just boght a MBA middle 2011 and power nap doesn't work right on it, specially in Mail app, where it downloads only a few mails and the rest of them are downloaded as usual, when recativate my laptop. Does anyone knows why?... i also tried to download the SMC update, but when i try to install it i get the message that my system is not compatible with the update.
Please somebody help me!!
Thanks in adevence!

http://support.apple.com/kb/HT5394

When trying to read emails on hotmail on firefox, the "back" button on my mouse doesn't work right. It works fine if I use internet explorer. This started about three days ago.

Also doesn't work right when I try to click on the inbox. I sometimes just get a blank screen. Seems to work fine on every other site except Hotmail.

Nothing changed after clearing cashe and cookies and restarting in safe mode.

Flash Player doesn't work, either IE or Firefox.

Flash Player doesn't work, on either IE or Firefox. Vista 32 bit, Firefox 10.0.2, Shockwave Flash 11.1.102.62. Reloaded Firefox and Flash. I get the spinning circle, but video never starts on IE or FF. Settings manager works. I'm at a loss. Update - actually it works on most video now, except Fox Sports or ESPN, either IE of FF.

After browsing the forums a bit, it would appear that this has been an ongoing problem for more than a month and the only 'inquiry' on the part of Adobe that I can find is one gentleman consistently asking people to report through the adobe bug/crash report process
http://forums.adobe.com/thread/953796
While I'm certain there have been many, many reports offered up, we have yet to see any solutions from the company, and admissions that there are issues with this product, or any ETA on expecting a reliable, stable version of Flash.
It would be very nice to have some feedback formally from the company. Many users (including myself) are experiencing frequent BSOD, having to spend hours uninstalling, reinstalling and aimlessly troubleshooting our computers all because of this add-in.
I recently updated every single hardware driver from my manufacturer, flashed my BIOS, troubleshot memory through self-diagnostics for days, and i still have issues related to Flash. I've tried the quick fixes suggested by (not sure if he's an Adobe official voice) user 'Chris' to no avail.
Certainly I could offer my dump file, by what good will that do me? Adobe, you certainly have enough crash reports to make SOME progress, please offer us up something, even if it's just to update us on any progress or research? All we know is you want information from us, while we still have nothing from you

Macbook air adoble flash player doesn't work after installation

macbook air adobe flash player doesn't work after installation

If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 7. Back up all data before making any changes.
Step 1
You might have to log out or reboot before a Flash update takes effect.
Step 2
In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
If you get a warning of a "blocked" or "outdated" plug-in, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch the browser.
If the warning persists, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 6
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 7
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 8
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.

L2TP on Cisco ASA 5505, just doesn't work??!

This is pretty urgent, client expects me to have this up by lunch today
So, there is this Cisco ASA 5505 ver 8.4.
Most things work but now I want to setup a vpn connection...
I have done this 2 ways, first by using the "VPN Wizard" in ASDM and then 5 hours later removing everything and configuring from cli.
And it just doesn't work, client (WinXP & Win7) gets "error 792" and sometimes "error 789" (both indicating problem with phase 1, I'm pretty sure of that)
Googling on those gives a few suggestions none works.
All I get in the log on Cisco is the "Error processing payload: Payload ID: 1"
Googling on that only comes up with a few pages telling me this message is caused by an error. (Yeah, I could never have guessed...)
For the cli config, I followed this tutorial carefully (3 times actually...)
http://www.cisco.com/en/US/docs/secu...html#wp1117464
I'm using PSK for IPSec, entered same on Cisco and client - checked several times, this is not a password/PSK issue.
Ports opened on Cisco: 500, 1701, 4500
(For a try I opened all ports, no change.)
And here's the "show run":
Code:
ASA Version 8.4(2)
hostname ciscoasa
enable password <string> encrypted
passwd <string> encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
switchport access vlan 7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.5.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address #.#.#.# 255.255.255.252
interface Vlan7
description VLAN till kontor
no forward interface Vlan2
nameif kontor
security-level 100
ip address 172.16.5.1 255.255.255.0
ftp mode passive
clock timezone GMT 0
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Webserver
host 192.168.5.2
object network Webserver443
host 192.168.5.2
object network rdp
host 192.168.5.2
object network vpnserver
host 192.168.5.2
object service vpn-service-group
object network VPN
host 192.168.5.2
object-group service Webports tcp-udp
description Portar fÃ¶r webbserver
port-object eq 443
port-object eq www
object-group service DM_INLINE_TCP_1 tcp
group-object Webports
port-object eq www
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group service VPNports tcp-udp
port-object eq 1701
port-object eq 4500
port-object eq 500
object-group service RDP tcp-udp
port-object eq 3389
object-group service vpn-services tcp-udp
port-object eq 1701
port-object eq 500
access-list outside_access_in extended permit tcp any object Webserver eq www
access-list outside_access_in_1 extended permit tcp any object Webserver object-group DM_INLINE_TCP_1
access-list outside_access_in_1 remark Ãppnar fÃ¶r vpn
access-list outside_access_in_1 extended permit object-group TCPUDP any any object-group VPNports
access-list outside_access_in_1 extended permit object-group TCPUDP any any object-group RDP
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu kontor 1500
ip local pool vpn1 10.10.10.10-10.10.10.50 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
object network obj_any
nat (inside,outside) dynamic interface
object network Webserver
nat (inside,outside) static interface service tcp www www
object network Webserver443
nat (inside,outside) static interface service tcp https https
object network rdp
nat (inside,outside) static interface service tcp 3389 3389
access-group outside_access_in_1 in interface outside
route outside 0.0.0.0 0.0.0.0 79.142.243.33 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authorization command LOCAL
aaa authorization exec LOCAL
http server enable
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA mode transport
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec ikev2 ipsec-proposal 3DES-SHA
protocol esp encryption aes-256 aes-192 aes 3des
protocol esp integrity sha-1 md5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal 3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
subject-name CN=ciscoasa
proxy-ldc-issuer
crl configure
crypto ca certificate chain ASDM_TrustPoint0
.... (sorry, not giving you the cert...)
crypto ikev2 policy 1
encryption 3des
integrity sha
group 2 1
prf sha
lifetime seconds 86400
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash md5
group 1
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 1
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 1
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 1
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh scopy enable
ssh 0.0.0.0 0.0.0.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 10
console timeout 0
no vpn-addr-assign aaa
no vpn-addr-assign dhcp
l2tp tunnel hello 100
dhcpd dns 8.8.8.8
dhcpd auto_config outside
dhcpd address 192.168.5.11-192.168.5.36 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec
address-pools value vpn1
group-policy DfltGrpPolicy attributes
dns-server value 79.142.240.10
vpn-tunnel-protocol l2tp-ipsec
address-pools value vpn1
username test password <string> nt-encrypted
username someoneelse password <string> nt-encrypted privilege 15
username someoneelse attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec
service-type admin
username someone password <string> nt-encrypted privilege 0
tunnel-group DefaultRAGroup general-attributes
authorization-server-group LOCAL
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group vpn1 type remote-access
tunnel-group vpn1 ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:dd92aa6707dc63e8ed7dad47cfecdd47
: end
In Pingvino Veritas!

I lmost got it working now, new problem is that the connection is immediately ended.
Logs shows that client is authenticated and assigned an ip.
From the logs, all happens during one second:
IPAA: Client assigned ip-address from local pool
IPAA: Local pool request succeeded for tunnel-group
IPAA: Freeing local pool address
L2TP Tunnel created, tunnel_id is 24
L2TP Tunnel deleted, tunnel_id =24
IPSEC: An outbound remote access SA has been deleted
IPSEC: An inbound remote access SA has been deleted
Session is being torn down. Reason: L2TP initiated
Teardown UDP connection

Time Machine Just Doesn't Work Anymore

I was a happy Time Machine (with Time Capsule) user for months. But it just doesn't work anymore. It takes longer than an hour to do every hourly backup so it is backing up 24 hours a day. It finds hundreds of thousands of files changed every hour and tries to back them up. Finders says only tens of files have been modified all of today. I have tried rebuilding my spotlight indexes, repairing my Time Capsule with Disk Utility and starting over with a brand new backup. But it just backs up hundreds of thousands of files every hour. So I am turning off Time capsule since it is clearly broken. If anyone has any suggestions at all I would welcome them.

Marcia,
Consider the following, it might give you some ideas:
Time Machine performs backups at the file level. If a single bit in a large file is changed, the WHOLE file is backed up again. This is a problem for programs that save data to monolithic virtual disk files that are modified frequently. These include Parallels, VMware Fusion, Aperture vaults, or the databases that Entourage and Thunderbird create. These should be excluded from backup using the Time Machine Preference Exclusion list. You will, however, need to backup these files manually to another external disk.
One poster observed regarding Photoshop: “If you find yourself working with large files, you may discover that TM is suddenly backing up your scratch disk's temp files. This is useless, find out how to exclude these (I'm not actually sure here). Alternatively, turn off TM whilst you work in Photoshop.” (http://discussions.apple.com/thread.jspa?threadID=1209412)
If you do a lot of movie editing, unless these files are excluded, expect Time Machine to treat revised versions of a single movie as entirely new files.
If you frequently download software or video files that you only expect to keep for a short time, consider excluding the folder these are stored in from Time Machine backups.
If you have recently created a new disk image or burned a DVD, Time Machine will target these files for backup unless they are deleted or excluded from backup.
Installing new software, upgrading existing software, or updating Mac OS X system software can created major changes in the structure of your directories. Time Machine will backup every file that has changed since the installation.
Files or folders that are simply moved or renamed are counted as NEW files or folders. If you rename any file or folder, Time Machine will back up the ENTIRE file or folder again no matter how big or small it is.
George Schreyer describes this behavior: “If you should want to do some massive rearrangement of your disk, Time Machine will interpret the rearranged files as new files and back them up again in their new locations. Just renaming a folder will cause this to happen. This is OK if you've got lots of room on your backup disk. Eventually, Time Machine will thin those backups and the space consumed will be recovered. However, if you really want recover the space in the backup volume immediately, you can. To do this, bring a Finder window to the front and then click the Time Machine icon on the dock. This will activate the Time Machine user interface. Navigate back in time to where the old stuff exists and select it. Then pull down the "action" menu (the gear thing) and select "delete all backups" and the older stuff vanishes.” (http://www.girr.org/mac_stuff/backups.html)
*TechTool Pro Directory Protection*
This disk utility feature creates backup copies of your system directories. Obviously these directories are changing all the time. So, depending on how it is configured, these backup files will be changing as well which is interpreted by Time Machine as new data to backup. Excluding the folder these backups are stored in will eliminate this effect.
*Backups WAY Too Large*
If an initial full backup or subsequent incremental backup is tens or hundreds of Gigs larger than expected, check to see that all unwanted external hard disks are still excluded from Time Machine backups.
This includes the Time Machine backup drive ITSELF. Normally, Time Machine is set to exclude itself by default. But on rare occasions it can forget. When your backup begins, Time Machine mounts the backup on your desktop. (For Time Capsule users it appears as a white drive icon labeled something like “Backup of (your computer)”.) If, while it is mounted, it does not show up in the Time Machine Prefs “Do not back up” list, then Time Machine will attempt to back ITSELF up. If it is not listed while the drive is mounted, then you need to add it to the list.
*FileVault / Boot Camp / iDisk Syncing*
Note: Leopard has changed the way it deals with FileVault disk images, so it is not necessary to exclude your Home folder if you have FileVault activated. Additionally, Time Machine ignores Boot Camp partitions as the manner in which they are formatted is incompatible. Finally, if you have your iDisk Synced to your desktop, it is not necessary to exclude the disk image file it creates as that has been changed to a sparsebundle as well in Leopard.
Let us know if any of this helps.
Cheers!

Sound doesn't work(only in firefox). why? sound doesn't work(only in firefox). why? (adobe flash player doesn't work even thought it's installed)

sound doesn't work (only in firefox). adobe flash player doesn't work correctly, thought it's installed. can't solve the problem. i need Sound.
== This happened ==
Every time Firefox opened
== don't know

What does the Adobe test page say?
http://www.adobe.com/software/flash/about/
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
See also [[No sound in Firefox]] and [[Video or audio does not play]]

Is there a way to fix an iPod touch 4G home button that isn't stuck but just doesn't work?

A couple weeks ago my home button got stuck. To fix it I found this video http://www.youtube.com/watch?v=yBfhCmq9VkA&list=WL429346A18D0B1E65 to help me out. The second option of using the charger ended up working, thus making the button work again. It was working fine after doing that but then it got stuck down again and I had to put the charger in and do that again. However, all of a sudden the home button just doesn't work anymore. It's not even stuck all the way down. I can press it repeatedly but still nothing.
I've had the iPod for about 6 months now and got it off of amazon refurbished so warranty is out of the question i'm sure. If it really is broken with no way to fix it then that's fine as i've been using assitive touch for weeks now and am used to it since i've been using it egulary since there's no other way. I just wanted to ask and make sure first before anything else though.

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PL

I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PLEASE HELP!!

Hi jim1287,po
Check for the latest updates. Installing latest updates should resolve this problem.
Also, try to ran disk repair using safe mode in Mac, for instructions please visit: http://support.apple.com/kb/PH14204
Try enabling root user profile on mac and try to check. OS X Mavericks: Enable and disable the root user
Regards,
Ajlan Huda.

My Apple TV Gen 1 just doesn't work

Hello,
I have setup/reset/setup this device so many times it just drives me crazy. I honestly believe that this technology just doesn't work.
I have an iMac running the most up to date version of OS X 10.6.5, I have the latest version of iTunes, 10.1.1. I'm using the Airport Extreme.
I have followed the directions to the letter!
Please help!
Thanks,
Aloha
John
I have a number of movies, etc on my pc but to make things easier, i just opted to a custom sync, display only those items i have selected, and chose 3 movies only.
I can see them on my tv, but when i select play, i always get an error indicating that this device is not authorized to play the content. I have deauthorized/authorized my pc many times.
I'm thinking about just dumping all my apple products and just stick with a microsoft based pc.

I am having the SAME issue. Just bought the Apple TV 1st Gen. from AppleStore, then followed the instructions to the letter. I am using iMac 10.5.8, Airport Extreme Base Station, AppleTV, and I have the most up-to-date iTunes and also made sure AppleTV is up to date. I get the same stupid error messages indicating the device is not authorized. Called Apple (no)Support, and was walked through restarting all my devices (like I didn't already try this, but just to make 'em happy, did it again...), didn't resolve the issue. "Steve" was like "...hmm, that shouldn't be doing that..." Really, dude? Maybe that's why I called you. Thanks for your time. Hope you guys enjoy my money I gave you.
Anyone have any ideas? I am about to pack this thing up and send it back. When I purchase ALL Apple products that are advertised as being able to just plug and go, it should freakin' work.

I can't find any error in my vi but it just doesn't work please help

I'm trying to control a robot named cs-113 and I find someone has already achieved this. He wrote a vi called robot cs-113.vi and I just tried to write a same one but it just doesn't work. Can anyone tell me why it doesn't work? Thanks for your help!
由 normanshi 在 08-01-2006 04:11 AM 上編輯的訊息
Attachments:
robot-cs113.vi ‏79 KB
cs-113 test.vi ‏62 KB

It would really help if you were a little more specific about what isn't working. Also try debugging your application in highlighted execution with probes to find out exactly what data you're sending out the port.
Jarrod S.
National Instruments

Flash CS6 doesn't work

Hello,
It has been a while since I worked with Flash, but once a year I have to edit a Flash file (with sponsors of a local event). Last summer I made the latest version of the file in Flash CS5. I've installed CS6 (the complete design&web premium package). Now I want to change the file that I made last year, but Flash CS6 doesn't work like it should. When I open the specific file, s small screen with the canvas is visible, I can't enlarge this screen, there are other windows available in the menu, but they won't show up when I activate them. I've tried to save the document as a CS5 file (I have a CS5 version on my laptop) but the file can't be opened (warning: this file has been created in Flash CS6).
When I try other menu-items, the program 'unexpectedly' stops.
In other words: I can't do anything anymore.
I've installed Flash CS6 again, but that doesn't solve the problem.
Is this a familiar issue? Can anyone help me?
Thanks
Joost
www.webuplease.nl

update:
- i'm still using cs5.5, but now have air3.3 overlayed
- i changed the render mode in the app.xml file to "direct" instead of "gpu" and republished
the app seems to display the graphics and dynamic text ok, but the stageVideos are not showing up.
suggestions greatly appreciated, thanks...

Palatino superscript doesn't work right

Palatino is my favorite font. But since installing Mavericks, superscripting doesn't work right in Microsoft Word. When Palatino type that is 14 points or smaller is superscripted, instead of being reduced a couple of points it is made extremely tiny. Also, instead of being raised to the top of the line, it appears in the middle (vertically) of the line. Since I use endnotes a lot, this effectively destroys the Palatino font for me.
According to Get Info, this particular font is Copyright © 1991-99, 2006 Apple Computer, Inc. Copyright © 1991-92 Type Solutions, Inc., so I've had it for a long time. Is there an updated version that will fix this problem? I don't have this problem in other programs, including PowerPoint. I use Office 2011.
Here is an enlarged image of the superscript (st):
<img src="http://ti.org/images/Superscript.png">

I think folks are looking for a solution.
And I have given one. The Palatino font supplied with Mavericks is no good. The only fix is to replace it with an older version. If you don't have one, you can't fix it.
Do you agree that Restore Standard Fonts...works ... Yes? No?
No. That option only attempts to remove fonts from the System and root Library folders that are included with OS X. It doesn't give you an option to restore OS X supplied fonts that are missing.
I have to presume you installed Mavericks over Mountain Lion. In Mavericks, Palatino is installed to the /System/Library/Fonts/ folder. In ML, that same (correctly working) font is installed to the /Library/Fonts/ folder.
Presuming this scenario is correct, the working version of Palatino in the /Library/Fonts/ folder was already active. When resolving conflicts in Font Book, the active font is always the one left active. Which would mean it removed the broken, Mavericks installed version.
As noted above, I fully tested and have proven the Mavericks version of Palatino is bad. I have multiple versions of this font. They are from:
OS 9
MS Office 2011
Lion
Mountain Lion
Mavericks
Adobe Type 1 PostScript
Adobe OpenType PostScript
I used Suitcase Fusion to activate one version at a time. Testing in Word, InDesign and other apps, they all behaved as expected until using the Mavericks supplied version.

I'm wondering if anyone has noticed frequent crashing of apps that never crashed before, error messages in their internet connections, and anything else that just doesn't seem right?

I'm wondering if anyone has noticed frequent crashing of apps that never crashed before, error messages in their internet connections, and anything else that just doesn't seem right?
I am not able to upload or download any apps. This has just happened since the 3rd of this month.

The iPad does not upload apps.
If you're having problems purchasing or downloading apps using the App Store app tell us what exactly happens when you attempt to purchase an app and what, if any, error messages to your get.

Flash just doesn't work right, period.

Similar Messages

Maybe you are looking for