Flash keeps wanting to map fonts with "Font Mapping" dialog box

Every time I open a CS4 Flasf FLA file I am prompted with the Font Mapping dialog box.
Even though I select the substitute fonts, every time it asks for it -- even after SAVE ASing the file under another name.
How can I get Flash CS4 to remember the fonts I have substituted?
Thanks,
...Rowby

I don't have CS4, but if it hasn't changed since CS3, if you read the warning that opens that font mapping you will probably see that it does not save the substituted fonts in the file. To get the fonts truly substituted you need to find the intances that use the fonts (shown in parentheses when missing) and select the new font.

Similar Messages

Replace missing font with font of my choice in Photoshop CS5

I'm using Photoshop CS5. How can I replace all instances of a missing font with a font of my choice?

I am having the same problem. From what I read around the web, there is supposed to be a dialogue box which opens to ask which font you want to use. I don't get a dalogue box, it simply replaces the missing fonts automatically with Myriad Pro without asking which font I want to use. If anyone knows how to get the dialogue box to appear, I'd appreciate the help.
I am using CC.
Thanks!
S.
Message was edited by: smarquina

Installing Fonts with Font Book

I recieved an Illustrator file to work on from a collegue. In addtion, they packaged the fonts that I needed to work with the file. When I unpackaged the file, the fonts showed up as a post script font, but would not load into Font Book. When I tried to add them through font book, I could see the files, but could not select them they were "greyed-out." If I doubleclick the file it opens up Font Book, but won't do anything else.
PLEASE HELP!

Font Book can read PostScript fonts. But from the sounds of it, you don't have the whole font. Type 1 PostScript fonts are a set. One file is a suitcase containing all of the low res bitmap screen fonts. The rest are the outline printer fonts. As an example, here's Adobe Garamond.
Adobe Garamond
AGarBol
AGarBolIta
AGarIta
AGarReg
AGarSem
AGarSemIta
The first file which I highlighted in green is the font suitcase of bitmap screen fonts. The rest are the outline printer fonts.
1) The files for a Type 1 PostScript font must have both the screen and printer fonts for a given set in order to work. They also must be in the same folder.
2) The suitcase of bitmap fonts will work alone, but output will be terrible since the system will print the fonts using the 72 dpi screen fonts in the suitcase if the outline portions are missing.
3) Having only the outline fonts will not work. You will get exactly what you are having problems with. You can see the fonts, but Font Book won't load them. That's not a problem with Font Book itself. No font manager will load outline fonts without the matching suitcase of screen fonts present.

Change color and font in two button dialog box

The two button dialog is boring.
I need to change the font (larger), the background color, the button color, and hilite the important part of the message.
Ex: is this color RED ? I'd like to see RED is red.
Attachments:
DIALOGBOX.vi ‏16 KB

Hi trout00;
I think it will be better if you create your own dialog window. Create a vi with all the features you want the dialog window to perform. Edit the connectors of the vi so they return what you want to retrieve (Right-click the upper right icon in the fron panel of the vi and select "Show Connectors"). Then, edit the configuration of your vi so it behave like a dialog box (Right-click the upper right icon again and select "VI Setup..."). Finally, add your vi to your main application vi.
Regards;
Enrique
www.vartortech.com

ExcelXML mapping---problem with XML maps in Excel sheet

Hi Friends,
I have one issue with ExcelXML mapping in Xcelsius.
The problem is I have designed one dashboard using ExcelXML mapping and everything is working fine but I was afraid that I could not able to find the mappings which were embedded in Excel.It happened many times.What I was doing is everytime Im re-mapping.I could be a big problem for me to do this procedire for everytime.How to recover my XML maps into excel sheet.Can anyone please provide the solution to achieve this.

Shouldnt it be equivalent ? I mean, as far as I know the ns0: shouldnt be a problem
when you have a namespace in the message then you need to associate it with some prefix....since ns0 (or any other prefix) is not present you are getting the error....having the namespace but not ns0 is the problem.
XMLAnonymizer bean may help you to add the namespace prefix...

N97 Ovi maps clashing with Google maps or sports t...

I have a UK Vodafone N97, Had Ovi maps working a treat and really pleased with it. However, I just installed google maps and then Nokia Sports tracker. Sports tracker wouldn't "track " at all and this then stopped Ovi maps from finding a signal.
However, Google maps finds 3-5 satellites and plots very quickly so I know the GPS receiver is working fine.
I uninstalled Sports tracker and Google maps, deleted all Ovi map data and did a soft reset, then re-installed Ovi maps for the UK ( I can not delete Ovi maps app from the phone, software V21)
I still cannot get a lock with Ovi maps but having put Google maps back on, that works fine!!
Any thoughts other than a hard reset as I have so much installed on the phone.
Thanks,
Martin

Google maps uses a different server, and installing it may have changed the server settings in the phone location settings. Go to Menu>Apps>Location>Positioning>Positioning Server> make sure that the server is still supl.nokia.com
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Problem With File Download Dialog Box

Hi all,
I have jsp page that allows a user to export oracle data to excel.
I have these code in my page:
<%@ page contentType="application/vnd.ms-excel" %>
response.setContentType ("application/vnd.ms-excel");
response.setHeader ("Content Disposition",
"filename=\"historicalrate.xls\"");
I run the page and it popups a file download dialog box with Open and Save buttons.
When I click the Save button a Save As window opens with a hr.xsl file name and Microsoft Excel Workbook(*.xls) as save type. It is what I want.
The problem I have is when I click the Open button on the file download dialog box it displays data in excel format on a browser well. Then I click File > save as on browser's tool bar the Save As window pop up with no file name and a default Text(tab delimited)(*.txt).
I need the file name and Microsoft Excel Workbook(*.xls) as default save type.
Any help would be greatly appreciated.
Please help
Thanks

I have the same problem with hui_ling.
When user click on "Open", Excel start and open excel file correctly but the file name on excel title bar. 'Cause the file name is in Japanese characters. Any one can help me?
Message was edited by:
TNTVN

Upon install the new version of Firefox with AOL, a dialog box comes up with no words and firefox is unresponsive

As I try to close, a dialog box suggests that Firefox is waiting for a response. This problem started happening when you added AOL to the install. I already use AOL and I assume there is some sort of conflict. I want a Firefox without AOL. That will likely solve my problem.

I think it is a problem with an AOL add-on.Could you try starting Firefox in its Safe Mode as a test, and also see whether it can be removed there?
''If Firefox is not running:'' Hold down the Shift key when launching Firefox.
''If Firefox is running and you can access the menu:'' Either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
and give Firefox the OK to restart.
''Both Scenarios:'' A small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?
Earlier threads:
* [https://support.mozilla.org/questions/1050657 Installing, firefox, I end up with a panel and a checkbox that blocks everything]
* [https://support.mozilla.org/questions/1051071 how do I get rid of this pop up ?]

How to load PDF (HTML Loader) with File Reference (dialog box) [AIR]?

Hi. I'm trying to get my AIR application to load a PDF document from the dialog box using File Reference Class.
With the code that I have if I use a regular Loader then I can get a PNG image to load into a container and display on the screen. But PDF's require HTML Loader which seems not to accept event.target.data because it is expecting a String.
This is the error I got
TypeError: Error #1034: Type Coercion failed: cannot convert "[object FileReference]" to flash.net.URLRequest.
    at test_pdf_load_from_dialogfla_fla::MainTimeline/loadFile()[test_pdf_load_from_dialogfla_fl a.MainTimeline::frame1:61]
[UnloadSWF] test_pdf_load_from_dialogfla.swf
Here is my code:
import flash.net.URLRequest;
import flash.display.MovieClip;
import flash.html.HTMLLoader;
import flash.net.FileReference;
import flash.net.FileFilter;
var file:FileReference=new FileReference();
var container:MovieClip=new MovieClip();
addChild(container);
var i:Number=1;
// button is an object on the stage, not being called via actionscript
button.addEventListener(MouseEvent.CLICK, showDialog);
var myFile:FileReference;
var myFileLoader:HTMLLoader;
function showDialog(e:MouseEvent):void{
    myFile=new FileReference();
    var PDFFileType:FileFilter=new FileFilter("PDFs (*.pdf)","*.pdf");
    myFile.browse([PDFFileType]);
    myFile.addEventListener(Event.SELECT, selectFile);
function selectFile(e:Event):void{
    myFile.addEventListener(Event.COMPLETE, loadFile);
    myFile.load();
myFileLoader=new HTMLLoader();
function loadFile(e:Event):void{
myFileLoader.load((e.target).toString());
(with the new forum selection I also can't seem to put this topic into the ActionScript location of the forum for Flash Pro.)

Success!!
I was pondering on this subject for several hours when I thought "perhaps the e.target declaration in the loadFile function might contain the "name" property.
When I used a trace statement to test this, my thoughts revealed that to be accurate. The e.target.name call does indeed populate the Output console with the correct file name.
To be sure I did the following:
myFileLoader.load(new URLRequest(String(e.target.name)));
myFileLoader.width=[[set width to anything other than the default of 0 to display the PDF content of the HTMLLoader]]
myFileLoader.height=[[ditto from previous line, the default is 0 which would make the PDF content invisible]].
I am so pleased to have had this inspiration and also to the fact that the ActionScript documentation that I found had good examples to follow.

Help me out with a simple dialog box task

i have used a single dialog box connected to a case structure..but the problem is it only executes true case after pressing "OK" button.
i need the false case to keep on executing untill "OK" button is pressed.. please heelp me out..

I agree that the spamming of the same question over and over is annoying and makes me LESS likely to help you. However, I will try to answer you.
I believe that you are probably fairly new to LabVIEW. LabVIEW is a dataflow language. As such, each node operates as soon as all of its nodes have data. Your One Button Dialog Box does not produce data until the button is pressed. Therefore, there is no way for the Case structure to execute either the True or the False case until the One Button Dialog Box produces its data.
So, there are several ways to work with this. Several have already been suggest in this or one of the other 3 queries.
You could place the button on the front panel. If it is on the front panel, it will be read immediately and the value of the button will be available. If it is inside of the loop, the value will be available each time the loop is run. So the suggestion to use a button on the front panel would be a good one.
If you need to use the dialog box, you could use a producer-consumer architecture. The dialog would be in the producer and the case code would be in the consumer. I think that this is not as good of a solution, but if this is part of a larger application it may be desirable to you for other reasons. There is an example producer-consumer that you can find in the example finder and I think that there is a template for one as well.
There are other ways to do this as well, but they get more and more complicated and I don't think you have the experience necessary to accomplish them. I also don't think you need to make things that complicated for such a simple task.
Good luck and try not to duplicate questions again.
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

Need help with "get info" dialog box

Hi Everyone!
I need some help with trying to figure out what some of the options are in the "Get Info" dialog box. I've searched the iTunes help and these forums, but can't find anything.
So, in the options tab,
1. What does "Part of compilation" Y/N, do for me?
2. Same for "Remember Position"
3. And finally, "Gapless album"
Thanks, Vince.

1. when you import a compilation album (like an 80's compilation or something), itunes will import it as
song 1, artist 1, 80's greatest hits
song 2, artist 2, 80's greatest hits etc
Click part of a compliation means that, it means that it would keep them altogether rather than having lots of songs everywhere
2. If you start playing a song, then stop, part way through, when you next come to the song, itunes will remember where you left off
3. Albums like jean michel jarre, classical, mike oldfield, etc, have many songs which merge into each other. Having gapless album ticked will ensure that, when playing the album, there are no gaps between songs

How can i get back the" Copy or Move automation with region?" dialog box?

i was working on an arrangement moving lots of regions around and logic kept asking me about moving automation with regions and i got sick of it and clicked "Don't ask me again" Now i want to Logic to ask me again if i want to move automation with regions is there a way to reset this or get the dialog box back? thanx-gospel

thanx sc. i will try it out shortly. Off Topic- since you speak german is was wondering if you don't mind what would the german translation be for "moonlight night tonight"- thanx gospel

Print VI at completion, with a print dialog box??

I'm trying to print a VI at completion, and want the user to be able to choose which printer they want to print to. Is there a way I can open the print dialog box from Labview??? (I'm relatively inexperienced with the program) Thank you!

Not that I know of directly from LabVIEW. You could write a C code
wrapper DLL that calls COMMDLG.DLL (the windows common dialog API
calls) to give you the print dialog, or could write write an MFC DLL
that uses a CPrintDialog.
If you use MFC, then you will be writing C++ and will have to make
sure to watch out for "decorated" names by by using the extern "C"{ }
declaration around your function and explicitly declaring your
function in your .def file
Douglas De Clue
LabVIEW developer
[email protected]
"Liz F." wrote in message news:<[email protected]>...
> I'm trying to print a VI at completion, and want the user to be able
> to choose which printer they want to print to. Is there a way I can
> open
the print dialog box from Labview??? (I'm relatively
> inexperienced with the program) Thank you!

Problem with File Open Dialog box

Gurus,
I am using Forms 10g with Windows environment .. My requirement is, to display File Open Dialog Box, and whatever file I am selecting it has to open .. I am able to get Dialog box, problem is, when I select a file (for example, test.txt), I cant see the file getting opened .. Can anyone suggest me how to get the desired result ...
Pasting my code below
declare
     a varchar2(100);
begin
     a := WEBUTIL_FILE.FILE_SELECTION_DIALOG('c:\temp','','*.*','c:\temp',OPEN_FILE, TRUE);
end;
Regards

You can see the code in the webutil.pll library.
FUNCTION CLIENT_GET_FILE_NAME (directory_name Varchar2 := NULL,
                               file_name      Varchar2 := NULL,
                               file_filter    Varchar2 := NULL,
                               message        Varchar2 := NULL,
                               dialog_type    Number   := OPEN_FILE,
                               select_file    Boolean := TRUE) return Varchar2 is
* CLIENT_GET_FILE_NAME
*   Client (Browser) side implementation of the standard GET_FILE_NAME Built-in
*   Used to display File Open, Save and directory listing dialogs
*   Implemented using calls to WEBUTIL_FILE
* Version 1.0.0
* Change History
*   1.0.0 DRMILLS 23/DEC/2002 - Creation
\*********************************************************************************/ Here is one example:
the_file := client_get_file_name('c:/', null, 'All Files (*.*)|*.*|',null,open_file,true);Francois

Having a little trouble with the "export" dialog box

Hi all,
When I get to the export dialog box, I'm not able to type directly in the "Custom Name" space. I have to click around and fiddle with some of the drop-down menus (and then get back to the "name format" that I like) and only then can I triple-click or backspace on the former name and input a new name in the "Custom Name" blank.
Also, the "Export Versions" tab is highlighted, but hitting the "return" key doesn't make the export happen. I have to mouse up to that button and click it that way.
Is anyone else having any trouble with inputting information on the export page? And ideas?
Thanks as always.

Yes, the name format is Custom Name with Index. But when I click in the field, I can't edit it.
Mark,
For me, this preset is working well. Have you checked, if the preset for "Custom Name with Index" correct? You can verify it, by setting the "File Naming" format to "Edit". The preset should look like this:
I'd try to edit the preset, save it, and edit it back, to create a new preset file.
If that does not help, remove the user Aperture User Preferences, as described in this document: Aperture 3: Troubleshooting Basics
And as I said, hitting "return" doesn't start the export.
That also your "Export" button is not responding to return, even if it is highlighted in blue, is a sign, that your preferences file might have a problem.
Regards
Léonie

Flash keeps wanting to map fonts with "Font Mapping" dialog box

Similar Messages

Maybe you are looking for