Flash learning interaction and Course Builder for CC products?

Hi all, Could anyone advise me where I could get extension Flash learning interaction for Flash CC and Course Builder for Dreamweaver CC? Sometimes their use and after stopping the development of eLearning Suite I anywhere on the Adobe site found these extensions.
Thanks for any response.
Yarik

You would be better advised to ask these questions on the Flash or Dreamweaver forums. This is the Adobe Captivate forum.

Similar Messages

Flash learning interaction and Course Builder extensions for CC products?

Hi all, Could anyone advise me where I could get extension Flash learning interaction for Flash CC and Course Builder for Dreamweaver CC? Sometimes their use and after stopping the development of eLearning Suite I anywhere on the Adobe site found these extensions.
Thanks for any response.
Yarik

You would be better advised to ask these questions on the Flash or Dreamweaver forums. This is the Adobe Captivate forum.

Flash learning interaction - extension

Hellou everybody, please, i need Flash learning interactions wich is the extension for creating elearning apps and quizzes inside flash cs6 and older version as a part of eLearning Suite product. Because adobe stopped any suites, new flash cc have not this extension. Is there some way to download it?
Thanks for any response and sory for my language
Best regards
Yarik

Thanks for answer. I have licensed eLearning Suite 6 wich include Flash CS6 and learning interactions extension, but now i use Flash CC and i think will need not to install flash cs6 specially only because i need learning interactions.
The same problem about Dreamweaver and Course builder interactions...
Do you think will adobe release this small but usefull extensions?

Oracle iLearning, Flash learning interaction implementation

I am new in iLearning. I am developing contents and assessments for uploading to iLearning. Instead of using iLearning assessment builder, I have used Flash learning interaction (SCORM). I have created several test with Flash learning interaction but i don't know how to upload it to iLearning since it is not only a question bank but also a assessment for enroll. I think the concept in iLearning (question bank and assessment is separated) has slightly difference.
Does anyone can tell me how to do it? or anyone has experience for developing assessment using third-party tools?

You would use the SCORM or AICC import options for this, depending on what tracking method is used with the content.

Microsoft Licenses Flash Lite 3 and Reader LE for Windows Mobile

Microsoft Licenses Flash Lite 3 and Reader LE for Windows
Mobile – A Developers Perspective
http://www.flashdevices.net/2008/03/microsoft-licenses-flash-lite-3-and.html
Also some other news:
Flash Lite has Shipped on Over Half a Billion Devices
http://www.flashdevices.net/2008/03/flash-lite-has-shipped-on-over-half.html
Best,

Hi Bill,
Can you tell when it will be available for download?
Today I installed Flash Lite 2.1 on my Asus M530W
WM6-Smartphone and flash&windows media enabled websites stoped
showing correctly - for example instead of having flash media
player with wmv content I see just white background (in the past
everything was ok).
Is there any Flash Activex plugin that will work with pocket
IE?
Thanks for support!
Greetings,
Robert

Hardware Build for CS6 Production Premium

First: Thank you for all of the information in this forum. I've done a bunch of reading and there is lots of good information about a many issues.
Second: I am looking for advice on a build for CS6 Production Premium. I don't want top of the line, but a decent midgrade setup. I've done a bunch of reading and I think that I have a reasonable system, but would appreciate some advice. The last time I built a computer was the 1990s when we still had to set DMA and IRQ channels, so I'm a bit rusty.
Case: Cooler Master Cosmos II Ultra Tower RC-1200-KKN1
Motherboard: Asus Z9PE-D8 WS Dual LGA 2011 Intel C602
Two - Intel Xeon E5-2630 V2 Ivy Bridge 2.6GHz six core processors.
Two - Intel STS200C CPU heat sinks.
240 Pin 1600 MHz DDR 3 RAM. 16 GB adequate or 32 GB for a good balance on this system? (Don't really want to goto 64GB, but will if necessary.) Is it better to fill all 8 slots on the mother board or better to have more GB per card and run with 4 empty slots on the mother board?
Crucial M4 256GB SSD SATA boot disk CT256M4SSD2.
Six: 2 TB 7200 RPM SATA 6Gb/S Seagate Barracuda ST2000DM001 hard drives in a RAID 3 configuration with five drives in service and one in standby. (The SSD plugged into the 6GB/s SATA plug and the six 2TB plugged into the C602 SATA 3GB/S plugs? Nothing plugged into the Marvell SATA plugs?
The mother board doesn't support RAID 3 and I have no RAID experience, so I'm guessing that I need a dedicated RAID controller for this? If so, is an Areca ARC-1224-8I a good fit, or is there a better choice?
Pioneer BDR-2208 blu-ray burner.
Rosewill 1300 watt 80 plus gold power supply.
Soundblaster ZxR PCIe sound card.
Windows 7 Professional Service Pack 1
Two - Dell UltraSharp U2413 24" LED LCD monitors.
Now the $3 question: Video card(s). Is a single GeForce GTX690 adequate to run the various applications in Production Premium? A GTX Titan? Quadro K4000? I don't really want to go to the Quadro K5000, but will if forced.
The only software on the computer will be Windows 7, Adobe CS6, and either McAfee or Norton, along with whatever drivers are needed for the systems. I'll stay away from quicktime as it seems to gum up the works according to some advisers on this forum.
Is there anything that I am missing, hardware wise or installation pointers?
Thank you for any assistance!

I am considering a similar build for heavy Photoshop and Lightroom use. Currently on and older i7-1358 pin 3.0Ghz XEON cpu, I'm considering either a new i7-4930 or dual Xeons as you are. The reason for the Xeons is ability to use ECC memory and add more cores. This is a production system in daily use so I'd probably not be overclocking.
Interested in your and others views on this. Previous to my current system, I'v always had dual socket Pentiums, Athalons or Opterons, someof which are still in service but in a reduced roll.
I typically use fast drives, some SAS, 15K & 10K (SSDs now where it makes sense) and RAID where necessary, especially for SWAP drives in Photoshop along with lots of memory..
Thanks for any input here. Basically ECC vs non ECC (I know there is a speed hit with ECC, but really - how much?). Overclock (i7-4930) or non overclocking (Xeons)
I should also mention, Culch, that I am considering the same CPUs and MB as you.
Thanks for reading.
Doug A

Critique my W530 Build for Post-Production Work

Hi everyone!
Please critique the following W530 build for post-production use. Primary applications in use are After Effects, Photoshop, Maya, Boujou, PFTrack, Mocha Pro. Was highly considering the Macbook Pro 15" Retina and the HP Ultrabook. But seems the Thinkpad has the best performance/price ratio in a decently portable form factor. Switching from the Mac side so guidance would be much appreciated!
Purchasing from Lenovo online store:
CPU - Intel Core i7-3820QM Processor (8M Cache, up to 3.70 GHz)
GPU - NVIDIA Quadro K2000M Graphics with 2GB DDR3 Memory
RAM - 8 GB DDR3 - 1600MHz (2 DIMM)
HDD - 500GB Hard Disk Drive, 7200rpm
Optical Drive - DVD Recordable
Total - $1,663.78
Buying separately:
512GB Samsung 830 Series SSD (Will replace with 500GB 7200rpm Drive)
Add 180GB SSD or 1TB 7200 RPM HD in Optical drive
Add 16 to 32 GB of RAM
My questions:
Will it be possible for me to do as I've said above (install a Samsung 830 series 512 GB as my Primary disk in place of the 500GB my laptop will ship with?
Can I put another SSD or a full TB with atleast 7200RPM in place of the DVD Recordable optical drive?
I want to upgrade the RAM to 16 or maybe even 32GB for excellent AE/Premiere performance. What clock freq RAM do you suggest/does it matter? If I want 32GB in total, how much should I get from Lenovo and which RAM do you suggest I add.
Any other suggestions on improving this build? Other brands you would recommend looking into?

My build and final specs I've gone with for a similair configuration (heavy VM use, some video editing, some 3D CAD/CAM work in SketchUp and older games like TF2).
As Shipped:
CPU - Intel Core i7-3720QM ($200 for less than 5% performance improvement from the 3820 isn't worth it)
GPU - K2000M (Twice the CUDA, worth it, newer video editors take full advantage)
RAM - 4GB RAM shipped
HDD - 320GB 5400RPM Hard Drive (See notes below for the trick)
Bay - Blank Travel Bezel
Upgrades:
RAM - 32GB DDR3 1600Mhz PC12800 from G.Skill
HDD - 240GB Mushkin Atlas mSATA SSD main boot drive, ~200MB/second random read/write worst-case
HDD - Software RAID-0 Dual 1TB Western Digital AV-25 hard drives, ~200MB/second sequential read/write
They've closed this loophole when I just checked, but you WERE previously able to order a W530 w/ a minimal 5400RPM low-power 320GB hard drive and NO CD/DVD drive (which but $180 off the price) by adding, then removing, the hardware RAID option.
The dual 1TB drives can push 200MB/second easily for sequential throughput when rendering or playing through video, and the SSD can keep up for random read/write as a scratch drive. I will recommend ONLY allocating 200GB of the SSD so there's extra redundancy, that's what I did at least.
But honestly, the 3820 isn't worth the $200 premium for 3.7Ghz versus 3.6Ghz CPU speed, spend that on the graphics card and/or buying the RAM and/or an SSD later.

APO Constrained and unconstrained Forecast for a Product, Location

Hi Gurus,
Please let me know the simple ways to get the constrained and unconstrained forecast for a product / location. I am new to APO, so please help me to send the detailed information. I would really appreciate it.
Thanks in advance for your wonderful help.
Best regards
Nagarajan

Nagarjan,
When you run the fortecast in DP you consider the sales history. Now, this sales history is actual sales. While forecasting all that is considered are these values of the past and not the present and future capability to actually meet this forecast. Its just plain statistically generated numbers. Now suppose based on your sales you generate the following forecastL
Jan 1000
Feb 1000
Mar 1500
This is then released to SNP. Use the TX /sapapo/mc90. The idea is now to EVALUATE THIS FORECAST AGAINST OUR CAPABILITY TO SUPPLY, IN OTEHR WORDS CONTRAINTS!
After releasing to SNP you can do a finite planning taking into consideration constraints such as Capacity, vendor capabilities, procurement constraints etc... Its almost always the case that the exact numbers cannot be met and thats whgy we do all the replanninga and levelling and rescheduling etc etc...
In SNP you can run an unconstrained pla., You can then level this using SNP capacity levelling. Remmeber this process may span certain levels like DC- > FG Plant -> SFG Plant etc...
After considering supply capcbilities you can come up with a REVISED forecast:
Jan: 800
Feb: 1000
Mar: 1600
Note that for March you are able to take an increased volume. You can now release this plan to DP back again to tell it that this is the demand I can meet and this is what should be planned. This can be done using Tx /SAPAPO/SNPFCST or /SAPAPO/LCOUT
Hope this clarifies.
Abhi

HT1339 my older iPod my husband wants to use and his netbook does not have cd drive. How do I down load iPod and iTunes info for this product so he can now use it?

my older iPod my husband wants to use and his netbook does not have cd drive. How do I down load iPod and iTunes info for this product so he can now use it?

Your question(s) is/are a little hard to understand. So your husband has an iPod as well as a netbook and he wants to be able to sync iPod with this netbook is that correct? If so, he'll need to first download and install iTunes assuming the netbook is running some version of Windows such as 7, Vista, or XP.
http://www.apple.com/itunes/download/
As for importing or ripping music, he'll have to either use an external CD/DVD drive that is attached via USB or rip the songs to another PC you have with a built in CD/DVD drive. Once you have imported them to the other computer, you can transfer the songs to an external hard drive or to his iTunes library via Home Sharing.
If this isn't quite what you were looking for, please clarify.
B-rock

Can i use flash for ui and interact with c++ builder for the rest

i know flash can be used in c# in visual studio but i dont remember a thing of this interaction.
is it possible to interact with c++ builder and how?
the scenario is simple
use flash for UI (showing-viewing data) maybe for a kiosk or something without mouse simply with touch input,
use c++ builder for the rest , database connection data proccessing etc
any info will be greatly appreciated
thanks

I would advise proper punctuation and grammar on a public forum, but to answer your questions, yes, yes you can! Flash can be used to produce any commercial imagery or animations for the purpose of making profit, as long as you have a valid license you purchased from Adobe. You bought it, you can use it for whatever you want.
By "book", I assume you mean the "tutorial" book series made by Adobe? If so, the name of the series is "Classroom in a Book", there's one for each versions of Flash. Personally it hasn't been of much use and I would advise simply practicing by yourself and getting familiar with the tools. Look for online tutorials and publicly available projects and see how they work.

Learning interactions and Flash player

I am trying to place a standalone multiple choice learning
interaction on my timeline. I can place it on the stage and see
everything in the component inspector, (only broke apart once!) but
when I test it, it appears that I cannot see any of the UI
components such as the checkbox or radio buttons. Searching this
forum, someone suggested previously that I had to be running Flash
Player 65? I installed Flash Player 9 from this site to ensure I
had the latest and it still does not work. I tried it at work,
where we are running Flash Player 7 and it seems to work fine. Is
it still my Flash Player? Do these interactions ONLY work with a
specific player? If so I need to know so that I can specify that in
the delivery. Thanks.

open the fla in flash and see if there's an flvplayback component on stage. if there is change its size to match your flv. if not, search for .source (as3) or .contentPath (as2). that will lead you to the object that plays the flv and you can assign its size using actioscript .

Using Flash Learning Interactions in Captivate

Hi there,
I am developing a short practice quiz in Captivate, but for
one of the questions I want to use a Flash CS3 learning interaction
(the "Hot Spots" one). I get the Flash file built, import it into
Cpativate, and everything works.
Now for the big question - how do I get Captivate to track
the successful/unsuccessful action from this question in a quiz? I
want to present users with a results page at the end of the
practice quiz, but since this question is not built with a
Captivate question slide (like m/c, t/f, etc.), how can I track the
result and include it on the results slide at the end?
Thanks in advance for any help!
Cheers,
Shawn

Hi J and welcome to our community
There is no way (back door or otherwise) that I'm aware of to
do this. Unless, of course, you mean to use Flash 8 and export the
Flash in a version 6 format.
Hopefully we will see Flash 8 files working just dandy in
Captivate version 2.
Cheers... Rick

Easy and fast building for multiple sites

Hi all, my first post. So, I've got a lot of sites but right
now I am working on about four main ones - all commercial. In the
past I had a webmaster but for the short-term and until my company
is stronger financially I'm taking on the building again myself. My
question is, in the past I'd used HTML, then looked at some CSS
combo, and then finally my webmaster hand coded my main site to
work with PHP/MySQL. So, as I begin to build my new sites, which
don't need to be super complex, what are the easiest and fastest
tools for me to use and have the least amount of grief. Should I
even bother with CSS? Can I just use a php page and use tables?
Should I delve into Flash, since many of my sites are media
oriented? Clean, quick, easy and functional are what I need. Thanks
in advance!

.oO(2manyirons)
>[...] My question is, in the past I'd used HTML, then
looked
>at some CSS combo, and then finally my webmaster hand
coded my main site to
>work with PHP/MySQL. So, as I begin to build my new
sites, which don't need to
>be super complex, what are the easiest and fastest tools
for me to use and have
>the least amount of grief. Should I even bother with CSS?
Of course you should. Reasonable and properly structured HTML
4 Strict
in conjunction with CSS for the presentation should be the
way to go.
>Can I just use a php
>page and use tables?
Whatever you like (or need).
>Should I delve into Flash, since many of my sites are
>media oriented?
No, because ...
>Clean, quick, easy and functional are what I need.
... Flash is neither of them. In fact it will cause a lot of
problems if
it's used improperly, for example for building the entire
site. In some
rare cases it has its uses and can be a valuable add-on, but
usually
it's just annoying and a usability problem. Things like
Flash, JS etc.
should be used wisely and carefully, especially on commercial
sites.
Micha

Flash learning interactions, what am i doing wrong

Hi all
everytime after i modify and then save and publish a learning
interaction...... i get a standard error message and flash shuts
down. also none of the modifications i make save...... how do you
save the the modifcations made to a learning interaction ? one i am
in the component inspector and i make changes to the Learning
interaction...... where do i go to save it, there is nothing in the
component inspector and paramters that points to saving..... so i
have been saving the fla as normal... eg under file menu 'save
as'... i then test the movie and get nothing.
Can anyone help ?

Dave,
> I have a Flash 8 FLVPlayback component on stage, with
> an instance name of 'vid'. In a frame script I have:
>
> vid.setMedia("dd2.flv");
> vid.play();
The FLVPlayback class does not feature a setMedia() method,
that I can
see. According to the docs, FLVPlayback "wraps"
mx.video.VideoPlayer. Not
sure if that means "inherits," but assuming for sake of
argument that it
does, the VideoPlayer class does not faeture a setMedia()
method, either.
Unfortunately, the docs get a bit cryptic at this point, IMO.
The FLVPlayer
Component has a contentPath property, as you mentioned, but I
don't see the
same property in either of the aforementioned classes.
Perhaps something in the inheritance chain provides for a
FLVPlayback.setContent property. I see references to a
mx.video.NCManager
class, but can't seem to find that class reference anywhere.
If you can do without the FLVPlayer Component, you may just
want to use
a Video object to load your external FLV.
http://www.quip.net/blog/2006/flash/how-to-load-external-video
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."

Trouble with Learning Interactions and loadMovie

I have created some very simple quizzes using the learning
interactions components - specifically one of the quiz templates.
When testing the .swf on its own, everything works, including the
last page that tallies the number of right and wrong responses and
calculates a percentage based on those numbers.
However, when loading this .swf into another movie (@
_level1), the question pages work correctly, but the last page
returns all zeros for the right, wrong, and percentage values.
Any thoughts on where the problem might be?
Thanks,
Dave...

That sure is a lot of code for a little quiz.
Without seeing the flash file, I can't be 100% sure, but it
looks like the following code is what you will have to adjust in
order for the counting function to work right according to you
introducting another movie clip in to the path.
on (release) {
_parent._parent.QuizTrack.setNewPage();
_parent.updateFrame();
gotoAndStop(2);
The "_parent._parent.QuizTrack.setNewPage();" may need to be
changed to reflect the movie clip instance name you inserted this
quiz into. Maybe something like
"_parent._parent.QuizTrack.setNewPage();"
Some references to "this" may have to change also. Again,
without seeing the actual flash file, I can only give certain
advise.

Flash learning interaction and Course Builder for CC products?

Similar Messages

Maybe you are looking for