Flash Light stays on until reboot

Hello
My flash light does not go off after I turn it on from quick settings or after it is used by camera.
I have tried a number of things including factory reset but unfortunately without luck.
Can anybody help please?

You may need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

  • Camera flash light stayed on

    Had my nokia lumia 1020 4 days.After last charge the flash light stayed on,even when turned off.Got extremely warm.Then shut down.Cannot turn on now.Any one else had this problem?

    Hi, Ernie5. Welcome to the Nokia Support Discussions! This seems to be an isolate case. Have you tried to press and hold the volume down and power keys? You can also try to charge the phone to make sure that it has enough battery left on it. Keep us posted on the outcome. Thanks!

  • Screen light stays on iphone4

    I have noticed that whenever I use my phone ,the screen light stays on until I manually switch off.
    Can anyone suggest how to rectify it?

    Take the case off. It's interfering with the proximity sensor. There is no "setting" that will fix this.

  • My ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off.

    my ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off and also it wont be recongnize by my computer .please help

    I'm having the same problem.  I'm using a new shuffle usb cable in my 2nd generation shuffle and nothing shows up on computer.  I'm wondering if the dock for the second gen is different than the new usb cable direct into the 2nd gen shuffle. I don't have a dock for it.  Before I buy one on ebay I hope someone can assist.

  • My Led flash light switch on all the time,anybody got the solution.i tried 3 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times.  3.press the home button n power button until the

    My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times.  3.press the home button n power button until the apple logo appears.  4.reset my all settings.

    My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times.  3.press the home button n power button until the apple logo appears.  4.reset my all settings.

  • TS2634 the flashing light next too the camera is stays on,can anyone help me with this problem.thanks

    the flashing light next too the camera is stays on,can anyone help me with this problem.thanks

    Basics from the manual are restart, reset, restore.  Have you tried these?
    Have you read the manual?

  • My macbook(2008) has been working well until a few hours ago. I tried plugging it in to several outlets but the light stays green no matter what, It will not charge. Also it will not stay on or turn on if I unplug it from the outlet, anyone have any idea

    My macbook(2008) has been working well until a few hours ago. I tried plugging it in to several outlets but the light stays green no matter what, It will not charge on any outlet. Also it will not start when it is unplugged when my battery is at 50%. It also will shut down immediately if I unplug it from the charger, even though it says it isnt being charged by it. Can anyone help with this problem?

    So you have the 13" aluminum notebook that just says "MacBook" on the display, correct?
    You can get a new battery for $100 from Other World Computing here.
    Alternatively, you can get one through Apple for $130 here.
    I personally would go through OWC - they're a highly-recommended third party for these kinds of parts and their batteries work just as well as Apple's.
    ~Lyssa

  • Cannot Bring Wireless Router (WRT54GS v6) online -- Sysco light stays orange

    Tried and tried to to clear the router to create an new SSID but cannot. The sysco light stays orange or white and flashe.  If anyone can help I'd appreciate ya.
    Thanks 
    Bill

    Try upgrading the router's firmware :
    For WRT54GS V6 firmware  Download 
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • I suddenly have two flashing lights on my keyboard by the caps lock key and over the end/pg up key.

    I encountered a problem waking my laptop (Pavilion dv7-1270us) this morning.  At first it would not wake up and had to do a hard reboot.  Now I have two flashing lights on the keyboard -the caps lock light and the one over the end/pg up keys over the number pad.  I have run several diagnostics and cannot find an answer as to what this is.
    This question was solved.
    View Solution.

    Hi,
    You're welcome and it's good to hear you've got it working
    All the best,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

    I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Continue with step 2 in the first set of steps.
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • Officejet pro 8600 plus power switch light stays on while in sleep mode. is this correct?

    officejet  pro 8600 plus  power switch light stays on while in sleep mode. is this correct?
    This question was solved.
    View Solution.

    The power light will slowly flash on and off when the Officejet Pro 8600 Plus is in a sleep mode state.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • My pavilion dv2418nr wireless switch light stays orange

    My pavilion dv2418nr wireless switch light stays orange, will not go to blue, will not recognize any surrounding neighborhood connections.  ISP says the router is fine, that it is the laptop switch not allowing the wireless card to read any connections. HP tech had me connect the Ethernet cord from the router to the laptop....I got on internet fine...however, that's a hard connect.  Has anyone had this problem with their switch?  i think until that little light turns blue I'm out of luck.  Thanks for you help
    This question was solved.
    View Solution.

    Hi,
    You're welcome, glad it helped
    Regarding the Touchpad, download the latest Synaptics Driver Installer on the link below and save it to your Downloads folder.
    ftp://ftp.hp.com/pub/softpaq/sp37001-37500/sp37065​.exe
    Next, open windows Control Panel, open Programs and Features, right click the entry for 'Synaptics Pointing Device Driver' and select Uninstall.  When this has completed, restart the notebook.
    When windows has fully reloaded, open your Downloads folder, right click on the Synaptics installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again and see if this has helped.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • After instaling the ios 8.2 my camera and flash light stoped to work. I have a iphone 5c.

    iPhone 5c
    ios 8.2
    camera and flash light stoped to work

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • My Apple TV has flashing light during update

    The Apple TV was working fine until I started the lastest update. It now has a flashing light on the front, and displays a blank screen on the TV. It will not Airplay either. I have not diconnectedd it, and have checked all the cables, that are connected and they are fine. Hpow can I get my Apple TV working again?

    We just had this happen today, and we were able to fix it using the restart instructions:
    Restarting your Apple TV (2nd or 3rd generation) with an aluminum Apple Remote
    Press and hold Menu and Down (buttons 3 and 4 below) on your aluminum Apple Remote for six seconds and then release when you see the LED light on the Apple TV flash rapidly.
    Hope this helps!!
    C

  • Flashing light in Wrotham supply. And not working wi-fi..

    Hello.
    Flashing light in Wrotham supply.  
    And not working wi-fi, or rather does not recognize the access point.
    They are not on the list .
    But the access point is at hand.
    Please send me the answer to email (Personal information removed by Moderator) 

    Hi @Game_Developer 
    Welcome to the HP Support Forums!
    I understand that you are having trouble with wifi connectivity. What light is flashing on that supply? I assume it is the power supply.
    Have you tried your notebook with a different wireless network?
    Do other devices connect to your router without any trouble?
    I would start with this to make sure the wireless is working properly on the notebook, or appears correctly in device manager.
    Resolving Universal WLAN, Wireless, and Wi-Fi Errors
    And only after verfying that all is good, would you want to look at the following steps, if you are still having troubles.
    Troubleshooting wireless network and Internet (Windows 8)
    Also, you can look at the power management for your wireless adapter:
    Disable the Power Off option for the adapter:
    1. Open Device Manager. (Win Key+R > type devmgmt.msc > OK)
    2. Expand the Network adapters.
    3. Right click on the Ethernet/Wireless Adapter and click Properties.
    4. Click the Power Management tab.
    5. Remove the check mark beside Allow the computer to turn off this device to save power.
    6. Click OK.
    7. Test.
    Forget the network: (Windows 8)
    1. Press Windows Key + C
    2. Click Settings.
    3. Click Change PC settings.
    4. Click Network on the left.
    5. Click Manage known networks.
    6. Click the network name.
    7. Click Forget.
    Reset the TCP/IP settings on your PC:
    1. Go to your start screen/menu and type CMD.
    2. Right click on the command prompt icon and chose Run as administrator.
    3. In the window that opens type "netsh int ip reset resetlog.txt" without quotes, and press enter.
    4. Restart your PC and test.
    It may also help to reset the winsock catalogue:
    1. Go to your start screen/menu and type CMD.
    2. Right click on the command prompt icon and chose Run as administrator.
    3. In the window that opens type "netsh winsock reset" without quotes, and press enter.
    4. Restart your PC and test.
    Reinstall the network adapter drivers:
    1. Download the drivers from here but do not run them yet.
    2. Go to your start screen/menu and type Device Manager.
    3. Expand Network adapters.
    4. Right click on the wireless adapter and choose Uninstall.
    5. Run the downloaded drivers from step 1.
    6. Restart your PC and test.
    Test an ethernet connection:
    Self explanatory. Test if the issue persists on a wired connection to rule out the wireless adapter hardware so troubleshooting can be directed towards the right areas.
    Test another connection:
    Many people rule out their home network as an issue if another device is working on the same network. Networking is not that simple. Each device interacts differently with your router or modem and it is impossible to rule out settings in that device until the notebook has been tested on another network.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Maybe you are looking for