Flash lite 3.0 setup for nokia devices

hi friends,
i have developed flashlite3.0 appliation using flash-CS3
so please let me know how i sholud deploy this appliation on nokia actual device .
Canu please suggest the whcioh setup i need to install on device.
Thanks
Manoj

You need to package the swf into a nokia sis installtion or
wgz widget.
you can use
http://www.kunerilite.net/
http://wiki.forum.nokia.com/index.php/Create_Flash_Applications_with_Carbide.c%2B%2B
or if you want to pack as a widget with browser runtime:
http://www.aptana.org/studio/download

Similar Messages

Flash Lite 2.1 player for Nokia S60 Symbian

On http://www.adobe.com/devnet/devices/nokia.html I tried to download the Flash Lite 2.1 player for Nokia S60 Symbian
When click on the link it redirects me on a page, and there is nothing to download!?
Br
Jure

Hi, I have tried to download from link provided in Your reply, but as I start to install message pups up about files being corrupt.
Tried again downloading file directly to phone, same error.
Could You help, please ?
Other thing, is this flash program or just a tool to make one, I am not sure... ?
Thanks.

Flash lite 2.x support for nokia n80?

I downloaded and installed the Flash Lite 2.1 standalone
player for the Nokia N80 from this page:
https://www.adobe.com/cfusion/entitlement/index.cfm?e=flashlite2%5F1%5Fsymbian%5Fdownload
I am able to run Flash Lite 1.1 SWFs fine but get
"installation not supported" for 2.x SIS files and "unable to open.
file corrupted" messages for 2.x SWFs. These files run fine on my
Nokia 6682 handset.
Is 2.0 or 2.1 supported for the N80? I noticed that it
doesn't appear to be through the Adobe Device Central CS3 but the
Flash Lite Player download page implies that it is.
Thanks.

Just tried installing Flash Lite 2.1 Standalone Player S60
V2.0 FP2 and S60 V2.0 FP3 and was not allowed to install either on
the handset so I think the one I downloaded and installed is
correct. Flash Lite Player 2 is not installed on this phone.
Any other possible reason why the Flash Lite apps won't run?
Does the phone need a firmware or other update? Also, I am by
sending the SWFs via bluetooth as SMS messages--that shouldn't
matter, should it? Or do I need to go the long route by
transferring it via usb?

Flash Lite 2.1 install on Nokia E50

Just did a Flash Lite 2.1 install on Nokia E50 after I
downloaded flashlite2_1_symbian_s60V3 and it installed apparently
fine with Nokia installer. However any .swf with test content
published to Device Central gets a corrupted file message after I
try run the .swf on the E50. The docs say the E50 should be
supported by this Flashlite version above.
Any ideas?
thanks
Colm

Alessandro,
Yes, I see now another Flash Lite 2.1 player installed not
under media but under menu. Starting it allows me to browse my
Flash Lite 2.1 files and they display fine.
Next up, I must try to get Flash Lite 3, but developer
applications for Flash Lite 3
have closed afaik. Does anybody know where/when/if/how a
Symbian edition Flash Lite 3 player can be got to test on a Flash
Lite 2.1 player phone?
thanks again!
Colm

Blackberry Enterprise Activation for Nokia devices

Hello,
My company's policy for the activation of BlackBerry devices is to go through wireless Enterprise Activation.
This option does not seem to be available in the BlackBerry setup screens of the Nokia E70.
1. Does anyone know if Enterprise Activation is supposed to be available on Nokia devices?
2. If not, what should be done by our IT administrator (on either BES or Exchange) to allow the activation via the BlackBerry Connect Desktop application to work?
Regards,
Yata

You can most certaily connect your E61-1 to a BES server as long as you use the Blackberry connect desktop application and PC suite together on the computer that has the MS-exchange e-mail accout setup on it in outlook. We have our onw Blackberry server and I have set it up on an E61 for a staff member with no problems at all using the software mentioned before.Message Edited by serenity on 06-Feb-2007
08:08 PM
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

Flash lite 2.1 player for window mobile 6.0 or 6.1

Is the Flash Lite 2.1 player available for window mobile 6.0
or 6.1? If it is so, where can I download ?

Hi Jerry,
There is a FL2.1 player for WM 5 devices
available
here. Note this is for playing back SWF files outside of the
browser - it's not a browser plug-in for Pocket IE.
We have not tested this on any WM6 or 6.1 devices so it's not
possible for me to say if it will work or not.

Flash lite sound problem on Sony Ericsson devices..

The same swf file runs on Nokia devices with sound in the background. And with no sound at all, on Sony Ericsson devices.
It's a flash lite 1.1 file. There is no ActionScript involved, just an MP3 file dragged in to a frame on stage.
What do I do wrong?

only check your device profile in device central. if your setting not wrong,it is maybe working
www.goldmanage.blogspot.com

Flash Lite vs. or in conjunction with device central

Hi,
I've used flashLite quite a lot in the past and i find that
mobile phones just arent good enough to keep up with the quality of
content that flashLite can provide, does device centre do anything
to help this?
Can someone give me the low down on the point of device
centre, you can already emulate phones in Flash pro 8....so i cant
see the advantage.
regards
Greg

Device Central:
1) Uses only phones that have Flash Lite pre-installed
2) Emulates speed of each handset differently
3) Change the time, date, signal strength, and remaining
battery of the phone on the fly
4) Emulate different lighting conditions
5) Calculates memory consumption
etc...

Need help with flash lite 2.0 update for flash

Hello
I am having trouble with the flash lite 2.0 update. I
installed the update sucessfully and restarted my system. When I
open flash(pro), there are no templates, api's, or emulators of the
flashlite 2.0 phones. Please let me know how I can fix this
problem. Thanks

Welcome to the forum.
First thing that I would do would be to look at this Adobe KB Article to see if it helps.
Next, I would try the tips in this ARTICLE.
If that does not help, a Repair Install would definitely be in order.
Good luck,
Hunt

Gmail Setup for Nokia E52

Dear everybody!
I recently got Nokia E52, and I experience problems with setup my Gmail account.
I tried to setup by E-mail wizard, but when I put username and password I go next and it comes back to previos screen it doesn't create gmail - email.
I am searching already for 2 days for some solutions, can't find anything.
I would appreciate if somebody could help me, send complete (manual, faq, etc).
Thank's every body for help and prompt reply!

I wish I could not follow they wizard, but in guide says to follow setup wizard
To configure IMAP for your Symbian S60 device, just follow these steps:
Enable IMAP in your Gmail settings.
Select 'Messaging' > 'Options' > 'Settings' > 'E-mail' > 'Mailboxes.'
If you have never set up email on your phone before, select 'Yes' to define a new mailbox. If you already have other mailboxes, select 'Options' and then 'New mailbox.'
Select 'Start' to begin the setup wizard.
Select 'IMAP4' and then 'Next.'
Enter your full email address (including '@gmail.com') as the email address and select 'Next.' Google Apps users, enter your full address in the format 'username@your_domain.com.'
Enter 'imap.gmail.com' as the incoming mail server and select 'Next.'
Enter 'smtp.gmail.com' as the outgoing mail server and select 'Next.'
Select the appropriate access point and then 'Next.'
Enter a descriptive name for the email account mailbox name.
Once your mailbox is set up, select it from the email mailbox settings screen.
Select 'Connection settings' > 'Incoming e-mail.'
Enter your address (including '@gmail.com' or '@your_domain.com') and password.
Select 'SSL/TLS' for your security (ports) and define your port as '993.'
Select 'Back.'
Select 'Outgoing e-mail.'
Enter your email address (including '@gmail.com' or '@your_domain.com') and password.
Select 'StartTLS' for your security (ports) and define your port as '587.'
Select 'Back' and change any other settings according to your preferences.
Check our recommended client settings, and adjust your client's settings as needed.

Nokia E5 Yahoo Email can not setup for Nokia Messa...

Hi
I have added my hotmail through email.nokia.com successfully, and on my phone as well, everything working fine. When I tried to add my Yahoo mail on email.nokia.com, it says I have to add it on my Phone.
I added on the phone, same process as my Hotmail. Yahoo email did get setup on my phone, but only works when I open it, and it will try to get new mails, as soon as I close it, it will disconnect, so not a real push mail. So it's still not showing under email.nokia.com after I setup on my phone.
Any idea? I bought this mobile because of this, if it's not working, I def need find a way to refund and get Blackberry
Thanks

Ahhh after some research and trail and error.. (hours of it)... I got a work around!!! I tried it for gmail and it works fine now!! Below is what you do:-
On inital stage please type dont type correct yahoo, gmail, hotmail or other email ID "
for example if ur id is ****@hotmail.com that type ****@abc.com insted of hotmail. and correct it on second stage.
Go to Mail on your phone - Options - Settings - scroll down to email - Options - New Mailbox
Click - start and then NO to allow connections (that stops Nokia Messaging swinging into control)
Now enter your hotmail address except do not put @hotmail.com at the end. Put @abc.com
e..g. if you email is *****@hotmail.com then enter mailto:*****@abc.com
Now enter your password - press OK
Now you will get an OPTION to define settings and it will allow you to manually set the POP3 or IMAP
Now put in your correct email id and passwd while setting the IMAP. for gmail use the following >
Enter 'imap.gmail.com' as the incoming mail server, Select 'SSL/TLS' for your security (ports) and define your port as '993.'
Enter 'smtp.gmail.com' as the outgoing mail server,Select 'StartTLS' for your security (ports) and define your port as '587.'
Save it... and you will say Wow!!! that worked!!!
Atleast it worked for me!!!
Try this out... hope this helps!!!
Ahhh after some research and trail and error.. (hours of it)... I got a work around!!! I tried it for gmail and it works fine now!! Below is what you do:-
On inital stage please type dont type correct yahoo, gmail, hotmail or other email ID "for example if ur id is ****@hotmail.com that type ****@abc.com insted of hotmail. and correct it on second stage.
Go to Mail on your phone - Options - Settings - scroll down to email - Options - New Mailbox Click - start and then NO to allow connections (that stops Nokia Messaging swinging into control) Now enter your hotmail address except do not put @hotmail.com at the end. Put @abc.com e..g. if you email is *****@hotmail.com then enter mailto:*****@abc.com Now enter your password - press OK
Now you will get an OPTION to define settings and it will allow you to manually set the POP3 or IMAP
Now put in your correct email id and passwd while setting the IMAP. for gmail use the following >
Enter 'imap.gmail.com' as the incoming mail server, Select 'SSL/TLS' for your security (ports) and define your port as '993.'
Enter 'smtp.gmail.com' as the outgoing mail server,Select 'StartTLS' for your security (ports) and define your port as '587.'
Save it... and you will say Wow!!! that worked!!! Atleast it worked for me!!! Try this out... hope this helps!!!

HT2500 email setup for multiple devices of same user

I am trying to set up email on my imac, iphone4, and mac book so that I can access and manipulate or delete emails on one device without affecting the email on the others. I do not know if I use pop on my main machine, imap on macbook and mobile.my.email on the phone.

While you can share access to a mail server from multiple clients (that's the default set-up for folks with multiple clients), your actions conducted from one client will effect what the other clients see.
If you're downloading mail messages from the server to storage on one client, then the other clients won't then have access to those messages. If you delete a message from the server, the other clients will no longer find the message on the server.
If you want these clients to be completely independent, then you'll need to set up several different users, and use one on each client.
POP is a comparatively poor choice here as that typically downloads messages from the server to the client.
Choosing IMAP is "newer" than POP, and usually a better choice.
For your outbound mail, use of the submission port (TCP 587) is recommended. Don't use SMTP port 25.
You're going to get to learn a little more about this stuff including about your current configurations, or you'll want to find somebody that can assist you with setting this up in your environment - the POP or IMAP and mail submission set-up is often specific to a particular mail server. Apple's Mail Setup Assistant might be helpful.

VNC Mocha Lite, DynDNSm, iPhone setup for accessing Mac outside network

Not sure if this will help but it took some trial and error to get right. This is to help those who want to use the Mocha VNC program to remotely access their Mac from outside their own network. Hope it helps.
1. First you need to get a domain name (free) from www.dyndns.org. Simply go there and sign up for a free account and pick your domain name (such as joeblow.homeip.net)
2. Goto the Mac you want to remotely control. In System Prefs goto the "Sharing" menu. Make sure to click on the "Screen Sharing" option (no need for Remote Login/Mgmt, etc). Then click on "Computer Settings...". Check on the second option "VNC viewers may control screen with password:" Then type in a password and hit "Okay"
3. Open Airport Utility
4. First you need to ensure the Mac retains a static IP address within your network if you access the network wirelessly. Your router may change it from time to time, so just to be sure, make it static. You do this by selecting your router then 'Manual Setup'.
5. Click on the "Internet" option at the top of the setup dialog box, then select the "DHCP" tab.
6. In the "DHCP Reservations", hit the "+" sign below.
7. Type in the description, for me this is simply the name of the Mac we are setting up, you can name this whatever you like.
8. Be sure the "MAC Address" is checked and hit "Continue".
9. Type in the MAC address, you can get this from the "Network Utility" utility found in the Applications/Utility folder and in the dropdown box be sure you select "en1". You do not have to type in the ":", it will automatically be done. Then in the "IPv4 Address" box type in the IP address you want to set as static for the Mac. For me, i simply used the address my router had currently given it, 10.0.1.197, but it can be 10.0.1.19x. for most who aren't connecting to more than 10 computers this won't be a problem. Hit "Done", you have not made the IP address for the Mac static.
10. Now you have to 'port forward' a port on the router so that when a call is made from outside the network on a certain port, it is forwarded to this Mac. Click the "Advanced" icon at the top of the Airport Utility application. Then click the "Port Mapping" tab.
11. click the "+" button below.
12. In the first two boxes, type in "5900" (if you add other Macs, make it 5901, 5902, etc, etc, each Mac must have a unique "Public" UDP and TCP port). Then in the private IP address type in the IP address you just reserved for the Mac. In the two bottom "Private" port text boxes type in "5900" (this is the same for ALL Macs...for whatever reason, on the Mac, VNC only seemed to work on port 5900). When done, hit 'continue'.
13. Type in a name for this port mapping - I used "VNC - {name of computer}" and then hit "Done"
14. Click the "Update" button at the bottom right of the Airport Utility app to update your router with these new settings. That's all you need for the Mac.
15. After installing VNC Mocha Lite on your iPhone. Open up the app and hit the "Menu" button, the "Edit Connections". Select one of the empty 6 connections.
16. In the "VNC Server IP Address" type the dyndns.org name you reserved "joeblow.homeip.net".
17. In the "VNC Server Port" box type 5900 (or 5901, 5902 etc, for subsquent computers)
18. In the "VNC Password" box type in the password you created in step 2 above
19. Give it a name in the next text box, whatever you like
20. Be sure the Mac OS X server is "On" as well as all the other options.
21. That's it, you should be set.
Hopefully this helps others.

Thanks a million, Dave and John, for the very helpful responses and suggestions. I now understand that with OS X 10.5.2 there is a "built-in" VNC-like server, thus there is no need to run Vine Server.app; I also checked, it is NOT in the Login list (under Accounts), hence does not automatically load in the background.
One puzzlement and one question:
The Puzzlement: the Password necessary for connection seems to be my regular password to log in to my Mac as a user. Whatever password I set under System Preferences>Sharing>ScreenSharing>Computer Settings>Password seems to have absolutely no influence on my being able to login with my iPhone with the (stored on the iPhone) "regular" password. that is to say, no matter what password I set on the MAC, I am not being asked and the iPhone connects and displays the screen. Go figure! ???
The Question: how do I do a port forward on the Airport Extreme BaseStation?
Using the Airport Utility.app (vers. 7.3.2)>Manual Setup>Advanced tab>PortMapping tab I click the plus button and then I am at a loss what Service to choose (Personal File Sharing, I assume?) and what numbers/digits I need to fill into these fields. Any advice appreciated.
I will follow-up on the dyndns.org advice.
Hope that you can help.
Thanks and cheers,
Veit

Packet Data Connection setup for Nokia 5800 on Tel...

Need help, purchased a Nokia 5800. Telus will not help me set it up for browsing, but they gave me thge APN, Proxy and Port. Can someone point me to where I need ot input it?
My geuss is
Access Point
Internet Connection
Advanced settings
Network Type - IPv4
Phone IP address - 74.00.0.00
DNS - Automatic
Proxy server address - sp.telus.com
Proxy port number - 80
Help anyone?

Juravial wrote:
Need help, purchased a Nokia 5800. Telus will not help me set it up for browsing, but they gave me thge APN, Proxy and Port. Can someone point me to where I need ot input it?
My geuss is
Access Point
Internet Connection
Advanced settings
Network Type - IPv4
Phone IP address - 74.00.0.00
DNS - Automatic
Proxy server address - sp.telus.com
Proxy port number - 80
Help anyone?
In menu-> settings and connectivity-> destinations-> accesspoint as decribed on page 75 of the English manual.
http://www.nokia-asia.com/support/product-support/nokia-5800-xpressmusic/guides
The IP address can't be right anyway
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How can i get the FLASH LITE 1.1 code for my mobile N-gage?

Hi everybody:
someone told me that send E-mail to
[email protected],but the address had changed?
i hope someone can told me way i get the code,thanks very
much!
MY PHONE MODEL: NOKIA N-GAGE
MY IMEI NUMBER: 351520001877051
my e-mail:[email protected]

Ciao
you can purchase the FL 1.1 player here
https://store1.adobe.com/cfusion/store/index.cfm?store=OLS-US#view=ols_prod&loc=en_us&stor e=OLS-US&category=/Applications/FlashLite
Alessandro

Flash lite 3.0 setup for nokia devices

Similar Messages

Maybe you are looking for