Flash lite loadmovie is not loading more than 5 jpeg images

Hi,
I am working on flash lite 2.0 for last few days. I am facing
a big problem when using duplicatemovieclip and loading jpg images
on these movieclips. It is showing an error that "it can not load
more than 5 images on one frame on one click "
I don't find any solutions for this. Please help
Regards ,
Gunjan

why not load them sequentially using preloader code?

Similar Messages

80GB will not load more than 2GB

My 80GB iPod will not load more than 2GB of music, and iTunes freezes when I try to delete anything.

If it wasn't an iPod and just a hard drive I'd say the partition/file table or MBR is messed up or corrupted. The general way to fix that would be to reformat the hard drive or maybe even a "low-level format"... but I'm not sure if that's possibe on an iPod as you'd have to reinstall the iPod software after that I would think and I'm not sure how easy or possible that is.
I'm not sure what the "5 Rs" are but does it include uninstalling and reinstalling iTunes?
Also, sometimes doing a combination of things works when doing only one at a time doesn't... ie, have you restored the iPod and reinstalled iTunes? If you can restore the iPod from another iTunes install on another computer and unintall/reinstall iTunes on your PC?
Just guessing and tossing ideas... sorry Apple didn't help you. Did they try to place MORE than 2GB on your iPod? I wonder if they only tried to place a file or two and found it to "work".

ICloud Control Panel does not sync more than 139 Images

Hello Forks,
i'm encountering a Problem with iCloud Control Panel v 3.1 running on Windows 8.1 Professional on a Lenovo Think-Tablet.
When I enable Photostream it downloads excatly 139 Images and stops after that.
On my Windows 8(.0) Laptop and my mac pro it's running fine tho.
I've tried everything i found on the forums so far:
-) deleted appdata
-) deleted Images Folder
-) reinstalled whole suite
-) logged out and in again
my Photostream contains ~600 Images
Any avice?

hello,
so how is it possible that on my mac - on which i enabled icloud like 1 week ago - downloads 600+ images and my tablet, where i installed icloud 2 months ago downloads almost nothing?
//edit:
if icloud _would_ download at least the newest images, but it downloads anything in between my photostream

How can I use bridge to create web galleries with more than 10 images?

I am new to building web galleris for my website. When i try to load more than 10 images in a gallery , Bridge cuts off all images beyond 10. I am confident that I can do this if i can find the right settings

I am not at my PS computer right now, but I think the Preview only shows 10 images (for speed) but they will all be there in the final output.

Error - Can't open more than one image in CS3

My Photoshop CS3 was working fine until all of a sudden it no longer lets me open more than one image at a time without crashing. Anyone else have this problem? How do I fix it?

Hi,
There may be two issues you have to check:
1) The " scratch disk" feature in photoshop(usually gets full). Go to preferences - performance. Also check how much RAM PS is using.
2) Printer Communication: sometimes Photoshop is unable to communicate with the default printer(may be unstable drivers, out of date etc). Network computers also make some issues
If you want to read more about this follow this link:
http://www.fluther.com/disc/22453/photoshop-cs3-not-opening-more-than-one-image-at-a-time/
They talk about the issues I mentioned here. Let me know if you found this information useful.
Vicente Tulliano

Firefox browser continues to hang and sometimes crashes when trying to load more than 10 bookmarks in tabs. Please help with my request as I would like to choose which tabs will load webpages and have all others stopped.

''locking as a duplicate - https://support.mozilla.com/en-US/questions/876430''
I have thousands of favorites and Firefox is my web-browser of choice. Sadly I'm backed up on what bookmarks I have stored and if the websites are still active or not.
I cannot load more than 15 bookmarks it seems at once as my PC is trying to load all the web content for each page in the new tabs.
This is my PC specs:
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 2 Build 2600
OS Manufacturer Microsoft Corporation
System Name xxxxxxxx
System Manufacturer System manufacturer
System Model System Product Name
System Type X86-based PC
Processor x86 Family 15 Model 75 Stepping 2 AuthenticAMD ~2210 Mhz
Processor x86 Family 15 Model 75 Stepping 2 AuthenticAMD ~2209 Mhz
BIOS Version/Date American Megatrends Inc. 0301, 21/08/2006
SMBIOS Version 2.3
Windows Directory D:\WINDOWS
System Directory D:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
User Name xxxxxxxx/ADMIN
Time Zone Atlantic Daylight Time
Total Physical Memory 2,048.00 MB
Available Physical Memory 1.53 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 3.85 GB
Page File D:\pagefile.sys
I have High Speed internet connection with the provider Rogers.
Dlspeed is 12.9 Mbps
Upspeed is514 kbps
My PC supports Windows 7 OS which I have as a multiboot alternative when my PC starts up.
I have continually waited and it says Firefox is not responding and I may be able to see the multiple tabs opened in my browser but cannot navigate or access them.
I have read on various sites that users have had as many as 1500 bookmarks load at once in tabs in the Firefox browser version that are outdated.
I have not been successful with just loading 50 bookmarks my goal is to be able to have 500 tabs loaded in firefox with webpage loading stopped on all of them. I will choose reload for about 10 tabs at a time to view webpage content and then close and move on to the rest.
My ultimate goal is to clear up the Thousands of bookmarks I have piling on for the past 6 years and some are duplicates or similar page sites.
Their is no Firefox 3rd party addons that I could locate that would allow this. Only to restrict the number of tabs loaded by giving warning messages when limit is reached.
Please assist me as it will greatly help me with finally deleting and re-organizing my Favorite and frequent websites in my Browser of choice Firefox.
The email is generic for privacy but it is valid please respond with methods on how I can achieve my request or suggestions on how I can modify my browser or PC settings to allow this. Thanks Firefox Administration Team.
I edited with a recent Workaround added to Troubleshoot section.
If there is a keyboard shortcut or easier way to do this would someone please let me know?

Firebug is notorious for causing problems like you described.
Disable it when you don't need it or install it in a 2nd Profile. Then you can launch the 2nd Profile separately to use Firebug and not affect what you are doing in the 1st Profile,

Firefox will not open more than one window and upon restarting will not open the previous tab and refuses to open bookmarks

Firefox does not open more than one window. I can open plenty of tabs, but not more than one window. Upon closing firefox and trying to restart the browser will not open and needs to be closed through windows task manager. Upon trying to re-open Firefox I receive the 'oops this is embarassing , firefox cannot re-open your tabs" message. When I click on "new session" the bookmarks do not load. It is becoming very frustrating as I am a student and often do lots of research on the web while using lots of open windows.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!

Please, the battery of my mac air does not last more than two hours, it's been over 30 days I sent for technical assistance and nothing! I am very disappointed with the mac air, I had a very different expectation of apples products!!!

Maybe the problem is not your MB Air......
Try these:
Make sure bluetooth is turned off if you're not using it.
Set your screen brightness to 4 bars.
See what's loading in your login items. Delete the ones you don't need.
Open Activity Monitor - under All Processes see what's using most of your CPU's resources.
Highlight the ones with the highest %CPU and hit quit process.
Remember that when Apple says that your battery should last 7 hours, they tested it just browsing the web and not have anything open in the background and screen is set at 50% brightness.

Following Artists Does Not Display More Than 300 Entries.

Hello, This has been an issue for a long time now, with the web player. The Artists List, Following, etc. do not show more than 300 entries.I follow something 800+, and can't see over half of my 'music collection' on this service. Please for the love of everything; Remove the limit on the scrolling feeds with add more bands as you scroll. I am also becoming quite irate this isn't even being acknowledged. I've had no success in email exchange with support either. Once I told them I am a developer by profession, and have built similar feeds for various sites, they stopped the BS, and flat out ended the exchange. I don't understand.If you want to get my sub $, I want this to work properly. Thanks,

Any progress on this? Still an issue.What is the point of following artists if you cap the display number. I've built these infinite feeds myself, admittedly not in flash, rather json etc. and this should be pretty easy to fix. I'd like to be able to see all the artists I follow, not less than half. Thanks.

Oracle 9,2.0 32 bit for Solaris can not access more than 4GB?

I am sorry to ask rather stupid question.
I joined company which has big SUN Fire running Solaris 9 64bit version.
It has system memory 16GB and 8 CPUs.
I found 8GB memory reported as free. It is production box. It is heavy loaded.
I guess Kernel parameter settings for Oracle set too low.
I reported DBA and asked DBA to improve.
My DBA said Oracle 32 bit version was installed and Oracle 32bit can't access more than 4GB system memory.
Is it true that Oracle 9.2.0 32bit for Solaris can not access more than 4GB memory?
32bit CPU and 32bit OS might have problem in access big memory.
But I never heard Oracle 9 running on 64bit Solaris box can not access more than 4GB.
Specially on Sparc 64bit chip and Solaris 9 64bit version.
I searched forums and could not find good answer. I believe it is rather obvious.
Please help me on this. I will be greatly appreciated.
Thanks in advance.
Message was edited by:
user524303

I was really surprised by the fact that almighty
ORACLE can not access 4GB memory.
So, it is true that 32bit Oracle is limited by 4GB RAM.Nope. 32bit almighty anything is limited to (max) 2^32 virtual adresses on a vmm system.
Often there is also some split where memory is divided into system and user areas, where user (program) has e.g. 2 or 3GB. All this works regardless of amount of RAM available 0.5 or 512GB.
Perhaps this link provides some useful info/background.

How to prevent the User from loading more than one seq file?

Hi,
I would like to prevent the tester operator from loading more than one test sequence. Any ideas how to do it?
Thanks
Rafi

Hi Marty,
Marty_H wrote:
Hello mhousel,
Testexec.exe by default loads the sequence files that were last open when it runs. It is often desired behavior to have multiple sequence files load automatically.
[Mark Housel] Maybe for some but certainly not for me.
This should be easily handled by TestStand without any problems. What do you mean by "chaos ensues"?
Certainly Teststand doesn't care a bit how many sequences are open. But, when my sequences open they initialize HW of the ATE associated with
that sequence file during the sequenceFileLoad callback. e.g. I allocate TELNET handles to a terminal
server that connects to multiple console within the system and als for
the UUT.
If a second sequence opens it knows nothing about the other sequence and again tries to open a TELENT session to the same port of the
terminal server and obviously fails, so my sequence reports that it
can't properly initialize the ATE HW. Bad juju!
Are your sequence files set to run automatically when they are loaded?
I guess so. Other than the trick of logging in as the special noExecution user and having special code in my sequence and modified Process Model I have no idea how to prevent a sequence fronm "runnin" when opened.
If you want to prevent Testexec.exe from loading multiple files, you should be able to close out one of the open files when it loads and that sequence file should not load in the future. I hope that helps.
The trick I read somewhere else of modifying the Testexec.uir file to never re-load a sequence file automatically seemes to have covered up solved the problem.
Thanks,
Mark

Purchase Order Quantity should not be more than PR quantity

Dear all,
We want to control Purchase Order quantity against Purchase Requisition.
We have configured message setting 00 076 as ERROR. when we create Material PR for lets say 100 quantity. When we create single or multiple Material PO against this PR for more than 100 quantity system is giving us error. This is exactly what we needed.
But due to this message setting when we create Service PR and give service quantity lets say 100. and when we create Service PO and give Service quantity 60. First time system is allowing to save the Service PO.
When we create another Service PO with reference to same Service PR system is showing error as we have configured. Even though quantity 40 is still available.
What we want is to have control on quantity of Purchase Order for Material as well as service. Quantity should not be more than PR quantity.
Is there any other way to have such control? please provide other available options to configure.
Regards
Kant

Hi,
06 076 is only for applicable only in case of material.
For Service and material both, use 06 400 as error "Materials/services for requisition & & already ordered with & &"
NOtes 786736
This may help u !
Regards,
Pardeep malik

Can not sync more than one photo folder to my phone. lost all photos???

Can not sync more than one photo folder at a time from my computer to mu iPhone. How do I get the drop down box to choose my photos, so I can manually pick photo folders???? Lost all my photo folders on phone.

Create a parent folder on your computer to contain the folders of photos you want transferred to your iPhone. Select the parent folder under the Photos tab for your iPhone sync preferences with iTunes. To add an additional folder of photos to your iPhone, place the folder of photos in the parent folder followed by a sync.

K5400 will not print more than one page at a time.

The K5400 Office Jet Pro will not print more than one at a time when I change the number of pages to print in Printing Preferences. I have downloaded all the updates available and have tried many times.
Using a Windows XP SP3 computer.
Thank you, Marion

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

P1006 - networked with XP and VIsta-64 not printing more than 2 pages

Hello - I have a dilemma with my HP P1006. I have the printer directly plugged in (USB) with my XP (32bit) PC. I have a Vista-64 PC networked with it. Both (XP-32 and Vista-64) are plugged in directly to the router (not wireless). My question is why can I not print more than two pages at a time with items opened on the Vista-64 PC? I CAN print more than two pages with items opened in the XP-32.
Things I've done:
1 - uninstalled everything & reinstalled the latest drivers for the XP-32.
2 - marked the printer as "sharing" on the XP-32.
3 - confirmed the printer is marked "enable bidirectional sharing" under the printer properties on the XP-32 PC.
Things I perplexed about:
1 - why won't items (docs, webpages, etc.) print more than two pages at a time from the Vista-64 PC?
2 - is there any reason that I should download a driver for the Vista-64 OS? If so, which PC do I download it to?
3 - I have another printer (Lexmark inkjet) connected in the same way (except it is a serial port not USB) and it can print more than two pages of a document at one time with no problem from either the XP-32 or Vista-64 PC? Why?
Any thoughts on this situation? Any suggestions are greatly appreciate.
Thank you - Jane.

Hi!
I just get a system message at teh bottom of teh screen saying "output cannot be issued " and it remains on teh same screen . I goto t-code va23 and enter my quotation number and on the top I select sales document ...issue output and select my output type and print preview or prnit , it comes out of that screen into the first screen and at the bottom gives msg "Output cannot be issued". I beleiev its not allowing the smartform to display when there are more than 2 pages , because I tried it with a contact which has 2 pages and it shows output but when I try with the one having more items i.e more than 2 pages it comes out of it . Its a smartform issue and something in the smartform is causing problem I beleive.
Thanks

Flash lite loadmovie is not loading more than 5 jpeg images

Similar Messages

Maybe you are looking for