Flash Media Administration Console Login Problems

Hi, I have Flash Media 4.5.  I stupidly lost the piece of paper i wrote my  password for the Flash Media Administration Console. Is there anyway i can retrieve the password?

Hi,
You can follow the steps listed here and reset your password.
http://forums.adobe.com/docs/DOC-2334
Thanks,
Shiven

Similar Messages

  • Login Problem Flash Media Admin Console

    New to FMS, testing FMS Developers versions.
    Connect and Live stream works fine using FMLE.
    Problem is I'm not sure how to get logged into the Admin Console.
    I'm not sure about what the "Server Name" is or the "Server Address". Is that just the IP address or the IP plus something else? How can I tell?
    FMS install was done by tech at hosting company and he forwarded this info:
    ----------- Install Action Summary -----------
    Installation directory = /opt/adobe/fms
    Flash Media Server Port = 1935,80
    Flash Media Admin Server Port = 1111
    Apache Install = Yes
    Administrative username = ******
    Administrative password = ******
    service owner = nobody
    service user = nobody
    service group = nobody
    Run as daemon = Yes
    Start Flash Media Server = Yes

    LATEST UPDATE!!!
    Just received this from the tech:
    From what I understand, I think port 1111 is an internal communication port and not accessible from the outside..? From the main page, there is a console link which brings you to http://adobe.marunde-muscle.com/fms_adminConsole.htm and from there I think you have to define the parameters to begin managing the installation.
    Does this mean anything? Is he/we on the right track?

  • Administration Console Extension problem with 8.1.5 upgrade

    I have a module of code that is an extension of the Administration Console. When I deploy the .ear file, I can see a yellow folder/node displayed in the Weblogic (8.1.3) console.
    This has been working for a couple of years until we recently upgraded to Weblogic 8.1.5 server. Even though the server log says that .ear file has been deployed successfully, the yellow folder/node does not appear in the Weblogic console.
    Any one know what may caused this problem?
    Thank you!

    From $ORACLE_HOME/bin enter the
    following:
    $ORACLE_HOME/bin/oerr ORA 01034 This will give you more info on your
    problem.

  • Flash Media Encoder 3.1 Problem..

    Okay so.. I just recently decided to start broadcasting on my new laptop which is windows 7 and a 64 bit and I reinstalled my Pinnacle software on this labtop and when I install the drivers and other needed programs such as this. So moving on to the problem, like many other people from what I see have similar problems like me about when you open Flash Media Encoder and then swap to your capture card it loads then black screens and finally instantly closes without warning.. I have pretty much gone through an ENTIRE day trying to get this to work.. I also went to my old labtop and tried it out there and for some reason it works an dis compatible there... Please I would appreciate some help as I would like to start broadcasting again..

    Please try using FMLE commandline version FMLECmd and see if it works?
    FMLE GUI has a known issue on Windows 7 starter and Home edition

  • Flash media live encoder 3 - Problem when opening program

    Hi,
    I've just downloaded and installed the flash media live encode 3 software. The trouble i'm having is upon launching the software i see the UI for a few seconds before i get a full screen video of my webcam.
    From there i don't seem to be able to get back to the UI.
    Seems a strange problem, even if i do ctl-alt-del and go to task manager i get back to the desktop for a few seconds and then stright back to the full screen video.
    Anyone any idea's on what i'm doing wrong?
    Cheers Paul.

    I have the exact same problem and no solution found. Does anyone actually respond on this forum? 

  • Flash Media Encoder 8 - audio problem

    I'm having an audio problem with Flash Media Encoder 8. I am
    converting a long Quicktime movie to Flash - about 28 minutes.
    After encoding, when I play it back, at about the 20 minute mark
    the audio just drops out. I've developed somewhat of a workflow and
    have done this with similar Quicktime files many times and have not
    had this problem. Does anyone have any ideas as to what may be
    happening? Anyone else see this?
    Some specs:
    Flash 8, Mac OSX 10.4.10, MacBook Pro C2D

    Five Pi,
    It may have something to do with the audio rate in your QT
    video. When using encoder, make sure your audio rate of your QT
    file is higher than the audio rate of your Encoder settings.
    Its just a guess, I have had the same problems, but I set the
    audio quality to very high when exporting from Final Cut Pro, and
    then set them to medium quality in encoder, and no more audio
    problems.
    Steve

  • Portal Administration Console Login

    Hello!
    I have integrated Oracle Weblogic Server with Oracle Identity Manager to achive Single Sign On. In IDM is set form login.
    My base_domain configuration is : AdminServer and a Cluster_0 with two managed servers : Server_1 and Server_0.
    I have as proxy server : Oracle HTTP Server (OHS) for each server : Admin-Server, Server-0, Server-1.
    I targeted my portal app to cluster. My portal application contains Portal Administration Console, avaibled at /myAppAdmin.
    Security Providers are (in this order):
    1. OAMIDAsserter - Oracle Access Manager Identity Asserter( Control Flag : REQUIRED, Active Types : ObSSOCookie)
    2. OIDAuthentificator - Provider that performs LDAP authentication (Control Flag: SUFFICIENT )
    3. DefaultAuthenticator - Weblogic Authentication Provider ( Control Flag : SUFFICIENT
    4. DefaultIdentityAsserter - Weblogic Identity Assertion provider.
    When I access Portal Administration Console from /myAppAdmin (admin-tools.war)
         1. I login first in IDM with the user from LDAP : weblogic_ldap. The login is ok and the ObSSOCookie is set.
         2. I am redirected to login from Portal Administration Console (this thing is wrong and I want to jump this step. I want to go directly in Portal Administration Console after the first login).
         3. I login in the second login page from Portal Administration Console with the same user : weblogic_ldap. The login has succeed.
         4. I am logged in Portal Administration Console and I can add content ( for exemple)
    What I have to do to have only the login form from IDM. To have the only two steps:
    1. Login in Portal Administration Console using login form from IDM and a LDAP user
    2. Access the Portal Administration Console
    I have tried :
    I have changed domain security Default Model : "Advanced" , set Combined Role Mapping Enabled to "FALSE", set Check Roles and Policies to
    "ALL Web applications and EJBs" and selected for When Deploying Web Applications or EJBs: "Ignore roles and policies to DD".
    After this changes I deployed myApp which contains /myAppAdmin Console with Security policies set to Advanced.
    I have only the IDM login, the correct one, and after that I am able to see first page of the Portal Administration Console and whatever I click I receive the error:
    ####<Mar 29, 2011 11:20:55 AM EEST> <Error> <netuix> <server0-dns> <Server-0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1301386855474> <BEA-423142> <The control com.bea.netuix.servlets.controls.page.SingleLevelMenu could not be rendered properly due to the following error:
    com.bea.p13n.entitlements.common.PolicyMgmtAccessException: Attempt to access Entitlement Policy Mgmt API by user in invalid role. Entitlement Policy operation attempted by disallowed user ["principals=[]"].
         at com.bea.p13n.entitlements.management.internal.SecurityHelper.isWLPAdminRole(SecurityHelper.java:937)
         at com.bea.p13n.entitlements.management.internal.RolePolicyDelegate.roleExists(RolePolicyDelegate.java:346)
         at com.bea.p13n.delegation.DelegationService.getParentInheritanceFlag(DelegationService.java:189)
         at com.bea.p13n.delegation.DelegationService.getAdminPolicies(DelegationService.java:753)
         at com.bea.p13n.delegation.DelegationService.isAdminPolicyOnResourceRoot(DelegationService.java:450)
         at com.bea.p13n.delegation.DelegationService.isAdminPolicyOnResourceRoot(DelegationService.java:430)
         at com.bea.jsptools.common.ToolsMenuTag.hasMenuAccess(ToolsMenuTag.java:354)
         at com.bea.jsptools.common.ToolsMenuTag.doStartTag(ToolsMenuTag.java:130)
    I have to modified admin-tools.war or something in domain's security or myApp's descriptors to be able to login in Portal Administration Console
    using only SSO and not both SSO and default login?
    Thank you for helping me.
    Edited by: bluerainbow on Mar 29, 2011 2:06 AM

    no idea? :(

  • Administrator Console Login?

    Hi to all,
    Could it be possible logining the Administrator Console(WL6.0sp1 on
    Win2K) instead
    of using the default "sysetm" user?
    Cause i've created a new user and add it to Administrators and Adminstrator
    groups. Later when i login Administrator Console with my new user and
    password, but it failed. So where to add a new Administrator user as the
    "system" privileges login Administrator Console? Is something related to
    evaluation version?
    thanks in advance
    Hawk Mar.26,2001

    Hi to all,
    Could it be possible logining the Administrator Console(WL6.0sp1 on
    Win2K) instead
    of using the default "sysetm" user?
    Cause i've created a new user and add it to Administrators and Adminstrator
    groups. Later when i login Administrator Console with my new user and
    password, but it failed. So where to add a new Administrator user as the
    "system" privileges login Administrator Console? Is something related to
    evaluation version?
    thanks in advance
    Hawk Mar.26,2001

  • OEM CONSOLE LOGIN PROBLEM

    Hi all,
    When I try to login to the OEM console(Oracle Management Server), I gave the Administrator as Sysman, and Password as OEM_TEMP, and Management server as ????.
    Because as I am not aware of what to give in Management Server.
    I got error unable to connect VT-1000.
    I have a standalone system having windows 2000 advanced server, and oracle 9i enterprise edition.
    How to solve this problem. Coz I want to perform export utilities, If I login in standalone mode I cant perform these tasks.
    R.Ramesh.

    I have a similar problem. I have the service running and repository created under the user of OMS, password = OMS. I can login to the schema with these credentials with sqlplus.
    Now when running DBA Studio with OMS, I give the same credentials for the OMS Admin Id and password along with the Management Server Name.
    It tells me the "credentials" are wrong. Saving and un-saving the id/password updates the omsconfig.properties file, but not sure that really matters.
    Any thoughts? I have a posting out there already "Fresh 8.1.6 install....OSM" ......should OMS!
    I'd REALLY appreciate your help,
    Scott

  • Portal Server Admin Console login problem....

    When I installed Sun Java Studio Enterprise 7 (trial edition) I also installed the server package (The second zip file). During the install I was only prompted to enter ID and password my Application server. But I do not know or have an ID and password for the portal server. When I launch the Portal Server Admin Console which is really the Access Manager's Admin console, it prompts me to enter my ID and password. The ID and password I have setup for the Application server does not work. Now my problem is, I cannot access the portal server on my machine. Does any one know how I can find out what my ID and password is? or how I can access the portal server?

    hi,
    I'm a newbie , who has just installed the java enterprise server. i installed it on windows platform and installation was successful. I don't know how to login to the portal server.
    please provide the address of the portal webpage if the one given below is incorrect:
    http://localhost:8080/portal/dt
    which username and password can i use for loggin in ? .....
    what is the default username and password ?
    is the username amadmin ?? if so what is the password ? ...
    kindly help me .....thanks in advance.... :)

  • Application Server - Admin Console Login Problem

    Hi,
    I have installed J2EE 1.4 (Sun Java Application Server Platform Edition 8) on Windows 2000.
    Installation was successful and the app server is getting started too.
    When i am going to http://localhost:4848/asadmin (Admin Console) and enter user/password to login ..
    It complains:
    HTTP Status 400 - Invalid direct reference to form login page
    type Status report
    message Invalid direct reference to form login page
    description The request sent by the client was syntactically incorrect (Invalid direct reference to form login page).
    I could not find much on this in the troubleshooting guide or other documents too.
    Did anyone else face this issue and if you know the reason/workaround, Pls suggest.
    Thanks in Advance.
    Anwar

    Hey anwarak, I am having the exact problem again as well. I had this same issue on the previous release of j2ee and for a short time I had it working. I lost that functionality when I lost my disk drive to a (s.m.a.r.t.) type of error. I am now in the rebuilding system phase and thought the issue might be resolved in this release. My initial resolution that was suggested here was to turn off my firewall.
    I am running Win-XP SP1 and I also have Norton2002 and ZoneAlarm Pro 4.5.538.001 on my system. I have attempted to allow ZoneAlarm to ease restrictions for cookies and ad blockers, just in case but to no avail! I found the following log at C:\Sun\AppServer\domains\domain1\logs\access on my system:
    127.0.0.1 - - [01/Apr/2004:20:49:19 -0600] "GET /asadmin/index.html HTTP/1.1" 304 -
    127.0.0.1 - - [01/Apr/2004:20:49:19 -0600] "GET /asadmin/admingui/TopFrameset HTTP/1.1" 200 533
    127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/css/css_ns6up.css HTTP/1.1" 304 -
    127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /asadmin/jsp/login.jsp HTTP/1.1" 200 6862
    127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/images/other/dot.gif HTTP/1.1" 304 -
    127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/images/login/login_background.jpg HTTP/1.1" 304 -
    127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /asadmin/images/productname.gif HTTP/1.1" 304 -
    127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/images/login/login_sun_logo.gif HTTP/1.1" 304 -
    127.0.0.1 - - [01/Apr/2004:20:49:30 -0600] "POST /asadmin/jsp/j_security_check HTTP/1.1" 400 1099
    The post line is the most curious one of all! I am not sure what the result codes are, or where to find a definition of them. I am still digging for that.
    I am also looking for the answer!

  • Design console login problem

    For allowing a normal OIM user to access design console when OIM is on websphere, do we need to do anything in addition to the following:
    1. Make user as a End-user administrator
    2. Add the user to System Admin user group
    I did this, but when I try to login into the design console, it asks me for target authentication credentials. I am able to login with xelsysadm user's credentials.
    Please help

    Hi Rajiv
    In OIM with weblogic, it works that way. But now I have OIM on websphere and even after performing the 2 steps, it shows me a prompt with this information.
    ==================
    Login at the Target Server
    Enter login information for null
    Realm/Cell Name:
    User Identity:
    User Password:
    ==================
    I guess it is expecting the information related to websphere cell/node.

  • Flash Media Admin Console cannot connect to server

    Hello World
    I just installed FMS Development version. It only connected
    Twice after which i cannot cannot any longer to the server via
    Admin Console.
    Do any one have an idea what might have went wrong..
    Mark

    The username and password you entered when you installed the server are stored in the {RootInstallation}/conf/fms.ini file.
    Let me know if that doesn't solve it.
    Jody

  • Weblogic Portal Administration Console - Workflow problem

    Hi
    I began with WLP a week ago. When I try default workflow, I see that it doesn't work right
    When I download workflow file (default.xml) it like this:
    <pre class="jive-pre">
         <transition>
              <from-status id="1"/>
              <to-status id="2">
                   <action class="com.bea.content.virtual.workflow.ReadyAction"/>
              </to-status>
              <to-status id="4">
    <capabilityConstraint>can_publish</capabilityConstraint>
                   <action class="com.bea.content.virtual.workflow.PublishAction"/>
              </to-status>
              <to-status id="5">
    <capabilityConstraint>can_publish</capabilityConstraint>
                   <action class="com.bea.content.virtual.workflow.RetireAction"/>
              </to-status>
         </transition>
         <transition>
              <from-status id="2">
    <capabilityConstraint>can_publish</capabilityConstraint>
    </from-status>
              <to-status id="3">
    <capabilityConstraint>can_publish</capabilityConstraint>
                   <action class="com.bea.content.virtual.workflow.RejectAction"/>
              </to-status>
              <to-status id="4">
    <capabilityConstraint>can_publish</capabilityConstraint>
                   <action class="com.bea.content.virtual.workflow.PublishAction"/>
              </to-status>
              <to-status id="5">
    <capabilityConstraint>can_publish</capabilityConstraint>
                   <action class="com.bea.content.virtual.workflow.RetireAction"/>
              </to-status>
         </transition>
         <transition>
              <from-status id="3"/>
    <to-status id="1">
    <action class="com.bea.content.virtual.workflow.DraftAction"/>
    </to-status>
              <to-status id="2">
                   <action class="com.bea.content.virtual.workflow.ReadyAction"/>
              </to-status>
         </transition>
         *<transition>*
              *<from-status id="4"/>*
    *<to-status id="1">*
    *<action class="com.bea.content.virtual.workflow.DraftAction"/>*
    *</to-status>*
              *<to-status id="5">*
    *<capabilityConstraint>can_publish</capabilityConstraint>*
                   *<action class="com.bea.content.virtual.workflow.RetireAction"/>*
              *</to-status>*
         *</transition>*
         <transition>
              <from-status id="5"/>
    <to-status id="1">
    <action class="com.bea.content.virtual.workflow.DraftAction"/>
    </to-status>
    <to-status id="2">
    <action class="com.bea.content.virtual.workflow.ReadyAction"/>
    </to-status>
              <to-status id="4">
    <capabilityConstraint>can_publish</capabilityConstraint>
                   <action class="com.bea.content.virtual.workflow.PublishAction"/>
              </to-status>
         </transition>
    <transition>
    <from-status id="-1"/>
    <to-status id="1">
    <action class="com.bea.content.virtual.workflow.DraftAction"/>
    </to-status>
    </transition>
    <beginStatus id="1" />
    <status id="1" text="Draft" />
    <status id="2" text="Ready for Approval" />
    <status id="3" text="Rejected" />
    <status id="4" text="Published" />
    <status id="5" text="Retired" />
    </workflow>
    </pre>
    When an item (content) was approved (published or current id = 4), I try to change it's status again. But I found "Ready for Approval" status (this status doesn't config in workflow at from id = 4) in the list of "check in content" form. I created another workflow file then applied to an item.
    This file:
    <pre class="jive-pre">
         <transition>
              <from-status id="1"/>
              <to-status id="2">
                   <action class="com.bea.content.virtual.workflow.ReadyAction"/>
              </to-status>
         </transition>
         <transition>
              <from-status id="2"/>
              <to-status id="3">
                   <action class="com.bea.content.virtual.workflow.RejectAction"/>
              </to-status>
              <to-status id="4">
                   <action class="com.bea.content.virtual.workflow.PublishAction"/>
              </to-status>
         </transition>
         <transition>
              <from-status id="3"/>
              <to-status id="2">
                   <action class="com.bea.content.virtual.workflow.ReadyAction"/>
              </to-status>
              <to-status id="1">
                   <action class="com.bea.content.virtual.workflow.DraftAction"/>
              </to-status>
         </transition>
         *<transition>*
              *<from-status id="4"/>*
              *<to-status id="5">*
                   *<action class="com.bea.content.virtual.workflow.RetireAction"/>*
              *</to-status>*
         *</transition>*
         <transition>
              <from-status id="5"/>
              <to-status id="1">
                   <action class="com.bea.content.virtual.workflow.DraftAction"/>
              </to-status>
         </transition>
    <transition>
    <from-status id="-1"/>
    <to-status id="1">
    <action class="com.bea.content.virtual.workflow.DraftAction"/>
    </to-status>
    </transition>
    *<beginStatus id="1" />*
    <status id="1" text="Draft" />
    <status id="2" text="Ready" />
    <status id="3" text="Reject" />
    <status id="4" text="Approve" />
    <status id="5" text="Retire" />
    </workflow>
    </pre>
    After I had changed the item's status to Approve, I checked out then checked in to access "check in content" form. I found that the list is not map with workflow file.
    Workflow file : Retire
    In the list : Ready
    After many times examination I found that the result of the list in "check in content"(when item in Publish state) follow beginStatus id property. It means when i change value of id in beginStatus tag then the values in the list change base on value of the id.
    I was confused is it really wrong or i was missed something configuration. I tried it 3 day but I can't fingure it out
    *So sory beacse my Enghlish is not good.
    Please, help me
    Best Regards
    Edited by: user8502077 on 03-Mar-2011 05:46

    Hi
    I began with WLP a week ago. When I try default workflow, I see that it doesn't work right
    When I download workflow file (default.xml) it like this:
    <pre class="jive-pre">
         <transition>
              <from-status id="1"/>
              <to-status id="2">
                   <action class="com.bea.content.virtual.workflow.ReadyAction"/>
              </to-status>
              <to-status id="4">
    <capabilityConstraint>can_publish</capabilityConstraint>
                   <action class="com.bea.content.virtual.workflow.PublishAction"/>
              </to-status>
              <to-status id="5">
    <capabilityConstraint>can_publish</capabilityConstraint>
                   <action class="com.bea.content.virtual.workflow.RetireAction"/>
              </to-status>
         </transition>
         <transition>
              <from-status id="2">
    <capabilityConstraint>can_publish</capabilityConstraint>
    </from-status>
              <to-status id="3">
    <capabilityConstraint>can_publish</capabilityConstraint>
                   <action class="com.bea.content.virtual.workflow.RejectAction"/>
              </to-status>
              <to-status id="4">
    <capabilityConstraint>can_publish</capabilityConstraint>
                   <action class="com.bea.content.virtual.workflow.PublishAction"/>
              </to-status>
              <to-status id="5">
    <capabilityConstraint>can_publish</capabilityConstraint>
                   <action class="com.bea.content.virtual.workflow.RetireAction"/>
              </to-status>
         </transition>
         <transition>
              <from-status id="3"/>
    <to-status id="1">
    <action class="com.bea.content.virtual.workflow.DraftAction"/>
    </to-status>
              <to-status id="2">
                   <action class="com.bea.content.virtual.workflow.ReadyAction"/>
              </to-status>
         </transition>
         *<transition>*
              *<from-status id="4"/>*
    *<to-status id="1">*
    *<action class="com.bea.content.virtual.workflow.DraftAction"/>*
    *</to-status>*
              *<to-status id="5">*
    *<capabilityConstraint>can_publish</capabilityConstraint>*
                   *<action class="com.bea.content.virtual.workflow.RetireAction"/>*
              *</to-status>*
         *</transition>*
         <transition>
              <from-status id="5"/>
    <to-status id="1">
    <action class="com.bea.content.virtual.workflow.DraftAction"/>
    </to-status>
    <to-status id="2">
    <action class="com.bea.content.virtual.workflow.ReadyAction"/>
    </to-status>
              <to-status id="4">
    <capabilityConstraint>can_publish</capabilityConstraint>
                   <action class="com.bea.content.virtual.workflow.PublishAction"/>
              </to-status>
         </transition>
    <transition>
    <from-status id="-1"/>
    <to-status id="1">
    <action class="com.bea.content.virtual.workflow.DraftAction"/>
    </to-status>
    </transition>
    <beginStatus id="1" />
    <status id="1" text="Draft" />
    <status id="2" text="Ready for Approval" />
    <status id="3" text="Rejected" />
    <status id="4" text="Published" />
    <status id="5" text="Retired" />
    </workflow>
    </pre>
    When an item (content) was approved (published or current id = 4), I try to change it's status again. But I found "Ready for Approval" status (this status doesn't config in workflow at from id = 4) in the list of "check in content" form. I created another workflow file then applied to an item.
    This file:
    <pre class="jive-pre">
         <transition>
              <from-status id="1"/>
              <to-status id="2">
                   <action class="com.bea.content.virtual.workflow.ReadyAction"/>
              </to-status>
         </transition>
         <transition>
              <from-status id="2"/>
              <to-status id="3">
                   <action class="com.bea.content.virtual.workflow.RejectAction"/>
              </to-status>
              <to-status id="4">
                   <action class="com.bea.content.virtual.workflow.PublishAction"/>
              </to-status>
         </transition>
         <transition>
              <from-status id="3"/>
              <to-status id="2">
                   <action class="com.bea.content.virtual.workflow.ReadyAction"/>
              </to-status>
              <to-status id="1">
                   <action class="com.bea.content.virtual.workflow.DraftAction"/>
              </to-status>
         </transition>
         *<transition>*
              *<from-status id="4"/>*
              *<to-status id="5">*
                   *<action class="com.bea.content.virtual.workflow.RetireAction"/>*
              *</to-status>*
         *</transition>*
         <transition>
              <from-status id="5"/>
              <to-status id="1">
                   <action class="com.bea.content.virtual.workflow.DraftAction"/>
              </to-status>
         </transition>
    <transition>
    <from-status id="-1"/>
    <to-status id="1">
    <action class="com.bea.content.virtual.workflow.DraftAction"/>
    </to-status>
    </transition>
    *<beginStatus id="1" />*
    <status id="1" text="Draft" />
    <status id="2" text="Ready" />
    <status id="3" text="Reject" />
    <status id="4" text="Approve" />
    <status id="5" text="Retire" />
    </workflow>
    </pre>
    After I had changed the item's status to Approve, I checked out then checked in to access "check in content" form. I found that the list is not map with workflow file.
    Workflow file : Retire
    In the list : Ready
    After many times examination I found that the result of the list in "check in content"(when item in Publish state) follow beginStatus id property. It means when i change value of id in beginStatus tag then the values in the list change base on value of the id.
    I was confused is it really wrong or i was missed something configuration. I tried it 3 day but I can't fingure it out
    *So sory beacse my Enghlish is not good.
    Please, help me
    Best Regards
    Edited by: user8502077 on 03-Mar-2011 05:46

  • How to video via email using flash media playback setup?

    How I can send video via email?  I send every week an email that contain a link to WMV file on our website.  I am trying to send the same thing using flash media player. Here the html generated via flash media playback setup and will not display in an email.  Any advise
    <object width="400" height="400"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=http%3A%2F%2Fwww.4GodIsLove.com%2F%2FTV%2FFlash%2FLydua_Fares_Elhaana.flv"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true"  width="400" height="400" flashvars="src=http%3A%2F%2Fwww.4GodIsLove.com%2F%2FTV%2FFlash%2FLydua_Fares_Elhaana.flv"></embed></object>

    salma_salma wrote:
    Thanks Janaki but how can I add a new application? I tried to do it using Flash Media Administration Console but it doesn't work
    Hi Salma,
    To add an application to FMS follow the below steps
    1. Create a folder "my_app" under "$InstallRoot\applications" directory.
    2. For simple server side code... add "main.asc" file inside "$InstallRoot\applications\my_app" directory which has the content like
    application.onConnect = function(clientObj){
         trace('onConnect function");
         return true;
    3. To add streams to the application, creates 'streams' folder inside "$InstallRoot\applications\my_app" directory, within that create '_definst_' folder and then place your FMS supported streams within the directory. So your streams for the 'my_app' application will be at "$InstallRoot\applications\my_app\streams\_definst_\mystream.flv".
    You can connect to this application using the url "rtmp://your_server_name/my_app". To play the stream mystream.flv using video player, use the url "rtmp://your_server_name/my_app/mystream.flv".
    Regards,
    Janaki L

Maybe you are looking for

  • Problem with kde and sound

    Hi! I've a problem with KDE and sound. When KDE shows a alert the alert's sound sounds with delay. 3-5 seconds. Same happens with kde start. Can anybody help me? Thanks!

  • How do I know if my iphone is not locked to a particular provider.

    I had a contract with vodafone and I am trying to move to a sim only contract with Virgin. Vodafone say they have unlocked the phone but Virgin say the phone is still locked. How do I know the truth. If the phone is locked how do I get it unlocked. T

  • Anyway to get a 1080p signal from fios?

    A couple of weeks ago, I purchased a 32 Inch Sony Bravia 720p but yet 1080p compatible HDTV. I know my TV is capable of receiving 1080p signals as most HDTV's are in the modern era. However, Fios via the HD DVR only broadcast up to a 1080I signal. My

  • Address in Credit card and payment not sticking and invalidating payment

    I am trying to purchase international roaming. The ATT app to pay keeps failing. I know the credit card works. I have seen other posts on this also. I have called ATT and they seem to be useless saying use another credit card. However, its not the ca

  • Plea from technical artist: CS5 clipping mask content selection as a preference...

    I just have to weigh in on this. I've been trying to adjust to CS5, from CS3, since November. It's now March. My job involves taking apart and editing complex art created by other people... who have all different ways of working.  The inability to se