Flash Media Encoder forum moved

Please go to the new location of the Flash Media Encoder
forum:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=15&catid=628&entercat= y

Sir i have a query
i install TV card in my system and flash media live encoder get encoding feed from the TV card and in video device selection i select 713xBDA analog capture which is shown in device selection drop down it is all ok but
i want to show this live feed on by flash palyer or my browser.
for camera we use get camera function and others but for TV card i dont know please tell me the any tutorials or any code script etc.
plzzzzzzzzzzz help me.
My FMLE get the input from tv card and tv card device is show in device drop down list which is "713xBDA analog capture" it is all ok
but problem is that i don't how to flash script get the "input" and "record" from this device directly. or through FMLE.
which is possible
Get Input and record:
TV card --> FMLE -->flash player (flash scprit required)
TV card-->flash player (flash scprit required)

Similar Messages

Welcome to the Flash Media Encoder Forum

Welcome to the Adobe Flash Media Encoder forum! Ask
questions, discuss, and share feedback with other Flash Media
Encoder users.r

Sir i have a query
i install TV card in my system and flash media live encoder get encoding feed from the TV card and in video device selection i select 713xBDA analog capture which is shown in device selection drop down it is all ok but
i want to show this live feed on by flash palyer or my browser.
for camera we use get camera function and others but for TV card i dont know please tell me the any tutorials or any code script etc.
plzzzzzzzzzzz help me.
My FMLE get the input from tv card and tv card device is show in device drop down list which is "713xBDA analog capture" it is all ok
but problem is that i don't how to flash script get the "input" and "record" from this device directly. or through FMLE.
which is possible
Get Input and record:
TV card --> FMLE -->flash player (flash scprit required)
TV card-->flash player (flash scprit required)

Adobe Flash Media Encoder (Free Version) Setup

I have Windows 7 64 bit. I used Windows Media Encoder and the pull method. I dedicated a port for the stream and knew how to advise people how to access the stream. I installed your Media Encoder, but I don't know how to make it a pull version. Where do I put the port that I have dedicated, and what is the way people can connect. I prefer having people connect through my computer instead of a server, since when servers get busy, they are slow. I did notice when the encoder installed and test it it works. I just need to find out how to stream as I stated above. I await your response....Steve

Update: The Flash Media Encoder forum will be moving to the
Flash
Support forums on Adobe.com this evening.

Flash Media Encoder 3.1, ManyCam, SigmaTel, Windows XP - No Audio output to FME or to Justin.tv

I have adobe flash media encoder 3.1 installed and am trying to stream downloaded .avi, .mpeg, and other video files to justin.tv using ManyCam, Everything seems to be working fine, video stream is clear and not choppy. Audio on my end is clear, and in Flash media Encoder i have "SigmaTel audio device" selected as my audio output (which is my stock audio driver)..however i keep getting complaints that there is no sound to my page on justin.tv. As far as i know all my drivers are installed properly and up to date. The green audio bar on FME shows no activity. Im wondering if this ****** SigmaTel excuse of an audio driver just doesnt get along with FME? There is no option to select "stereo mix" as other forums have said to do. Can anyone please help me get sound to my justin.tv page? Or help me find a way to instal a different audio driver that is compatible with a dell piece-o-**** dimension e520. I have downloaded Realtek HD Audio, SoundMAX drivers, and a few others but the only audio driver this piece of **** dell wants to recognize is the SigmaTel Audio Device, Which WONT OUTPUT SOUND TO FME!!!!!! PLEASE HELP!! TUMOUR IS GROWING!!
Can i not buy a set of surround sound speakers that are hooked up via USB and go around this problem? I really just want to get RID of SIGMATEL forever, and use REALTEK...but it wont recognize no matter how many times i download it. fml!

"The audio preview in FMLE indicates there IS audio being input"
How do you know this?
are you "Saving to file"? how is the audio in the saved file?
Adninjastrator

Flash Media Encoder 3 Closes Randomly

Okay, So Everytime I open Flash media Encoder 3, And I Try To Do Somthing (Change Anything, Open Profile, Etc) It Just Randomly Closes. It Doesnt Give me a message or anything. Ive uninstalled and re installed every version of Flash media Encoder at leaste 2 or 3 times for each one. Ive restarted My Computer about 6 times and still it does the same thing every time.
Heres A Video That I Recorded of what happens.
(If Embed Video Doesnt Show Up For You, heres The Direct Link- http://www.youtube.com/watch?v=sKSieFFd08Q )
Please Someone Please Help Me

I think FMLE forum would be best place for posting this query. Link for FMLE forum is :http://forums.adobe.com/community/flash/flash_media_live_encoder?view=discussions

Run Flash Media Encoder from PHP?

I have tried to run Sorenson Squeeze from the command line to
no avail. So far, no help from their support either. I was
wondering. I have Flash Media Encoder V8. Can I run that via a PHP
script and tell it through arguments what file to convert and how
to convert it?
Something like: c:\Program Files\Macromedia\Flash 8 Video
Encoder\Flash 8 Video Encoder.exe - FileIn -Arguments -FileOut
Any help would be great.

nope not possible.. unless you mean the flash Media Encoder,
which this forum was made for.
Flash Video encoder is a FLV encoder
Flash Media encoder is a Live Streaming Encoder

Is mp3 support going ot be added to Flash Media Encoder?

Hi everyone,
I work at CNET in the Entertainment division and we recently
launched a full on Flash video player
Example:
http://www.gamespot.com/video/918428/6172011/fallout-3-official-trailer-1
On the side for the past few months we have been testing
On2's Live Flash encoder and Adobe's Flash Media Encoder with
Akamai. Because of features lacking (like de-interlace) in On2's
encode, we have no choice but to use Adobe's encoder.
While there are something I wish would be added like full on
multi-thread support (considering On2VP6 is so CPU intensive),
though that's more of an On2 thing (maybe Adobe can pressure them
since Dual-Core/Quad-Core systems are the norm these days and the
On2VP6 does little to utilize it), one thing that has really urked
us is the choice for the Nellymoser codec to be the only option for
audio in the Flash Media Encoder (and On 2's).
We want to migrate from webcasting in Windows Media to Flash,
but our audience feedback has been horrible with the Flash live
streaming because of the terrible audio codec we are forced to use.
Which leads me to my question --- is there going to be any
updates in the near future to allow us to use mp3 as the audio
codec? We have several machines on order just to handle Flash Live
streaming using Adobe's software and going by user feedback, we
simply cannot do it...so we are gonna have to be forced to have
Windows Media player within our Flash which is going to kill the
user experience.
Anyhow, just hoping to hear a good answer. Have the same
question into On2's support....
Dave

I recently read on one of the listservs (not sure which one
it was... maybe the flashcomguru.com list?) that the next version
of FME will use hardware acceleration, so that should alleviate
some of the processor load. Of course, this is third party info I'm
passing along, so take it with a grain of salt.
About MP3, I'm not so sure I'd hold my breath on that one.
Problem is, FME is a free product, so I don't know if Adobe will
see value in shelling out the cash for the licensing required to
support mp3 encoding (money that will never be directly recovered).
They already have the licensing for ASAO, and as I understand
things, that ASAO license is the reason you can only use FME if you
own FMS or have an active account with one of their partner CDN's
Incidentally, this is a user-end forum, and I don't see a
strong presence from the Adobe employees around here (some, but not
a whole lot). If you were using FMS (rather than a CDN) I'd suggest
contacting Adobe support directly, but I've heard that support
requests from non-purchasers tend to fall to the bottom of the pile
indefinitely.

Flash Media Encoder Live Problem

FME locks up good ! FME freezes . FME Stops sending streaming audio .
// I hope this is posted in the correct forum.
I'm using Adobe Flash Media Encoder Live 3.0.1.5963 .
Windows XP Pro SP 3
Pentium 4 3.06 ghz 'dual core' cpu
1.5 GB rambus 800 mhz
MP3
44,100
192kbps
stereo
When streaming audio, FME locks up good and stops sending audio, usually after 8 minutes.
I have to force down my machine with the reset button.
I even tried with no video. Same problem.

Update:
The same problem exists in Flash Media Encoder version
1.0.1.460.

Flash Media Encoder 3.1 Problem..

Okay so.. I just recently decided to start broadcasting on my new laptop which is windows 7 and a 64 bit and I reinstalled my Pinnacle software on this labtop and when I install the drivers and other needed programs such as this. So moving on to the problem, like many other people from what I see have similar problems like me about when you open Flash Media Encoder and then swap to your capture card it loads then black screens and finally instantly closes without warning.. I have pretty much gone through an ENTIRE day trying to get this to work.. I also went to my old labtop and tried it out there and for some reason it works an dis compatible there... Please I would appreciate some help as I would like to start broadcasting again..

Please try using FMLE commandline version FMLECmd and see if it works?
FMLE GUI has a known issue on Windows 7 starter and Home edition

Flash media encoder 3.1

Hello,
I am trying to stream my xbox 360 gameplay through justin.tv.
I am having major problems with this, the first problem is when i use the flash media encoder 3.1
The software that I am using is -
Totalmedia extreme
VHScrCap
Flash media encoder 3.1
The problem which I have is when i cap the screen which i want to broadcast and transfer it into FME3.1, the picture is all blocky and and dead pixelated.
When I look at the other ppl doing this on utube, there is a perfect picture. I have changed the frame rate and stuff like that, but no matter what i do, its still the same, does anyone how how to fix this.
This is my computer specs -
Inter core 2 Duo E7500 2.93Ghz
Corsair 4GBKit (2x2GB) DDR2 800
Samsung 500GB 16mb cache
Vista home prem 64bit
NForce 6101i-Itx Geforce 7050 Graphics.
Thank you.

I think FMLE forum would be right place to post this query - you can post it here: http://forums.adobe.com/community/flash/flash_media_live_encoder?view=discussions

Flash Media Encoder problems

So I'm getting these 2 problems. I'm using Flash Media Encoder 2.5 on Windows 7 home. My upload speed in 2.1 mbs. I don't want to use FME 3.1 or 3.2 because they make my computer slower and I have the same problems.
First the preview screens are choppy. I'm recording a video game and both the input and output look like they have lag. But when I move my mouse across the area I'm recording the mouse moves perfecly fine, while at the same time, the game still looks choppy. Also it seems like whenever there is other activity like moving my browser around, typing or clicking the game, it looks perfectly fine. If tried both the low and high bandwith setting and they both have the same problem.
My second situation is with starting the program. When I click the start button, the session starts, but then instantly stops. I'm using Justin.tv so in the stream, it says I'm live with a screen shot of what I was recording.
Thank you for reading and I hope we can figure this out.

Could you please use any other device and see the difference? Does the issue happen with all the devices?

Can't Activate Flash Media Encoder CS3

I just had a new hard drive installed on my Windows XP SP3, 4 GB RAM, 2 dual core Intel processors machine. I reinstalled Production Premium CS3. All of my Adobe applications activated except Flash Media Encoder CS3. When I enter my serial number, it says it is an incorrect number and places a big red X beside of the number. The number I entered is the number on the box.
I called Technical Support and held for them for over 1 1/2 hours but no one came on to answer my question. I entered the problem in the Support Portal but it has been over 24 hours and no one has contacted me. I like Adobe software but not their technical support.
Can anyone in the Forum help?
Thanks,
Linda

I've tried it (with cookies cleared) on three different browsers now and they all experience the same problem. I am on OS X but that should not affect my ability to connect to a particular server. Here, for example, is a non-functional download link I'm given: http://download.macromedia.com/pub/flashmediaserver/flashmedialiveencoder/installer/AdobeF MLE3.2.1_r.dmg

Flash Media Encoder 2.5

Hi--
I'm using Adobe Flash media Encoder 2.5 to stream Video & Audio to a web-site. For the past few days I've been unable to access my Channel on that web-'s Player or ANY other channels on the web-site-- after eliminating the browsers (as all 3 experience the same issue of non-accessibility to the web-site Player),and the fact that all 3 browsers PLAY OTHER Flash-encoded content, I have deduced the problem is with Flash Media Encoder as it keeps re-setting every 20 seconds or so indicating "Encoding & streaming to server is stopped due to aproblem in capturing Audio/Video"--however the settings are the same as when there was no problem. Anyone familiar with Flash Media Encoder 2.5 and any problems it may be experiencing? This has been ongoing for 4 days now
Screenshot below
Nleibo

I had the same problem and just resolve it a few minutes
ago!!!
ok for example if I need to add a user named "joe" and his
password will be "1234" I will type the following at the momand
promt:
users add -u joe -p 1234
please let me know if it's works

Can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media

can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media server . thnx

Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Hack Allows PowerPC Macs to Access Flash 11 Content
http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
 Cheers, Tom

New Flash Media Encoder

So, I've been playing with the new Flash Media Encoder here:
http://labs.adobe.com/technologies/fme/
It was a really simple download and works seamlessly with
Flash Media Sever. I think you have to update FMS2 to the January
07 update to use it, though. Anyway, below are some options for
trying it out. Have fun :)
Per Chris H from adobe:
1. You don't need a main.asc file on your FMS app to publish
and broadcast live streams with FME.
2. You can get a live stream from FME to playback in the
normal FLVPlayback component that ships with Flash 8 Professional.
Just make sure you have the "isLive" parameter set to true and the
contentPath should be:
rtmp://server_name/app_name/inst_name/stream_name.
Option from FMS livedocs:
1 New Flash Document with two layers: actions and video
display.
2 Add this code from the FMS livedocs to the actions layer:
var my_nc:NetConnection = new NetConnection();
my_nc.connect("rtmp://<YOUR RTMP ADDRESS>/streamtest");
var my_ns:NetStream = new NetStream(my_nc);
my_video.attachVideo(my_ns);
my_ns.play("stream");
3. Open Window > Library > Click little dropdown toggle
next to library title and select a new video display object and
specify actionscript control.
4. Drag Video Display out of the library and give it an
instance name of my_ns and publish it. I used a laptop for this
part so that I could stream to the file from my FMS server. I saved
the .swf as video_receiver.swf.
5 Stop Flash Media Server and create a folder called
streamtest in the FMS Apps folder, then start it again.
6. Fire up FMEncoder, specify the RTMP address you specified
in the Flash 8 AS code, and be sure that the stream is named,
"stream" (no quotes). Also, toggle off the save stream file, unless
you want to save the recording.
7. Click start on FME and open the video_receiver.swf and you
should see the stream playing.
Another idea:
Use the receiver from this tutorial:
http://www.adobe.com/devnet/flashcom/articles/broadcast_receiver.html

We have our own FMS and I have just installed the FME on a
workstation. FME reads video perfect but when I try to connect to
the server it won't accept my username and password. Where do I set
this? I have installed the add-in for FMS and also upgraded to the
latest 2.0.7 release. I'm green to the Flash Media Services so this
may come as a dumb question. Please help!

Flash Media Encoder forum moved

Similar Messages

Maybe you are looking for