Flash Media Encoder Live Problem
FME locks up good ! FME freezes . FME Stops sending streaming audio .
// I hope this is posted in the correct forum.
I'm using Adobe Flash Media Encoder Live 3.0.1.5963 .
Windows XP Pro SP 3
Pentium 4 3.06 ghz 'dual core' cpu
1.5 GB rambus 800 mhz
MP3
44,100
192kbps
stereo
When streaming audio, FME locks up good and stops sending audio, usually after 8 minutes.
I have to force down my machine with the reset button.
I even tried with no video. Same problem.
Update:
The same problem exists in Flash Media Encoder version
1.0.1.460.
Similar Messages
-
Save file on Flash Media Encoder Live 3
Use the 'Save to file' for archiving my events...when I go to
play back the archive.. flash players don't recognize the file it
says FV4 format ...what is going on??Try Adobe Media player to play the files. For f4v files, you will have to use "f4v post processor" tool before playing it in adobe media player. You can download this tool from https://www.adobe.com/cfusion/entitlement/index.cfm?e=fms35
-
Flash Media Encoder - server problem
Hi guys,
I tried to use FMS and FME to broadcast my webcam video, but
I got the error message:
Server Problem
Failure to connect to primary server. Please verify that your
Server URL is vaild and your internet connection is working and
retry.
I already done these steps:
1. install FMS and change the path to
<AppDir>C:\apps</AppDir>
2. install FME and set the FMS URL to rtmp://localhost/apps,
Stream: stream
But while I click Connect button, it took almost 5 mins and
then showed up the message above.
Did I missed something?
Could anyone help me out? thanks!!!!
wiiYou got your FMS application folders mixed up. You haven't
created a FMS "application", you've only told FMS to look in
C:\apps for a folder called apps.
Try to create a subfolder under C:\apps called "apps". I.e.,
create this: c:\apps\apps and then your rtmp string should
work. -
Problem when streaming with the CLI flash media encoder 2.5
I have a problem when streaming with Flash Media Encoder 2.5. When I run the GUI, everything works, but when I use the commandline with the same profile I have created using the GUI, it says it can't connect to the server.
I have to use this version of the encoder, because the other is not working with the server, and I have to create a program to remotely control the flash media encoder, so I have to use the CLI. What can i do to go over this problem?
Any help would be really appreciated. Thankyou.First of all, thankyou.
There is no authentication needed. I can't use Flash Live Media Encoder 3 because it is not supported by the people which manages the server i have to connect to.
In fact, I don't know why they dont support it, but that is the way it is.
Through the GUI, i connect directly and without problems, without user/pass.
Thankyou again. -
So I'm getting these 2 problems. I'm using Flash Media Encoder 2.5 on Windows 7 home. My upload speed in 2.1 mbs. I don't want to use FME 3.1 or 3.2 because they make my computer slower and I have the same problems.
First the preview screens are choppy. I'm recording a video game and both the input and output look like they have lag. But when I move my mouse across the area I'm recording the mouse moves perfecly fine, while at the same time, the game still looks choppy. Also it seems like whenever there is other activity like moving my browser around, typing or clicking the game, it looks perfectly fine. If tried both the low and high bandwith setting and they both have the same problem.
My second situation is with starting the program. When I click the start button, the session starts, but then instantly stops. I'm using Justin.tv so in the stream, it says I'm live with a screen shot of what I was recording.
Thank you for reading and I hope we can figure this out.Could you please use any other device and see the difference? Does the issue happen with all the devices?
-
Can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media
can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media server . thnx
Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Hack Allows PowerPC Macs to Access Flash 11 Content
http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
Cheers, Tom -
Problem with Flash Media Encoder
We're having problems trying to use Flash Media Encoder in
conjunction with an Opsrey 230 card. The device shows up in the
Encoding Options panel but when we try to change any settings we
get the following error "Problem with video capture device. Please
verify that it is working correctly and is not already in use"
The card works fine with Windows Media Encoder. Viewcast
support suggested trying it again with SimulStream enabled, but
still no joy.
Can anyone help?
System - Windows XP Pro 2002 SP 2
Thanks
PhilDoesn't look like any of your capture cards are on the
confirmed compatibility list... I wish there was a confirmed
INcompatible list (add three from above).
http://www.adobe.com/support/documentation/en/flashmediaencoder/FME_DeviceMatrix.pdf -
Flash Media Encoder 3.1 Problem..
Okay so.. I just recently decided to start broadcasting on my new laptop which is windows 7 and a 64 bit and I reinstalled my Pinnacle software on this labtop and when I install the drivers and other needed programs such as this. So moving on to the problem, like many other people from what I see have similar problems like me about when you open Flash Media Encoder and then swap to your capture card it loads then black screens and finally instantly closes without warning.. I have pretty much gone through an ENTIRE day trying to get this to work.. I also went to my old labtop and tried it out there and for some reason it works an dis compatible there... Please I would appreciate some help as I would like to start broadcasting again..
Please try using FMLE commandline version FMLECmd and see if it works?
FMLE GUI has a known issue on Windows 7 starter and Home edition -
Flash Media Encoder 8 - audio problem
I'm having an audio problem with Flash Media Encoder 8. I am
converting a long Quicktime movie to Flash - about 28 minutes.
After encoding, when I play it back, at about the 20 minute mark
the audio just drops out. I've developed somewhat of a workflow and
have done this with similar Quicktime files many times and have not
had this problem. Does anyone have any ideas as to what may be
happening? Anyone else see this?
Some specs:
Flash 8, Mac OSX 10.4.10, MacBook Pro C2DFive Pi,
It may have something to do with the audio rate in your QT
video. When using encoder, make sure your audio rate of your QT
file is higher than the audio rate of your Encoder settings.
Its just a guess, I have had the same problems, but I set the
audio quality to very high when exporting from Final Cut Pro, and
then set them to medium quality in encoder, and no more audio
problems.
Steve -
Streaming Live Video using Flash Media Encoder/Flash Media Streaming Server
We currently get a video feed from local cable channel that gets streamed live to our internet website. It gets encoded first on our Windows 2003 server running Windows Media Encoder and then gets published on another Windows 2003 server running Windows Media Services. We are trying to replace these two servers with another solution and the two things driving this project are:
1. These two servers are coming to an end of life cycle so we need to replace the hardware and upgrade the OS.
2. They currently only support Windows compatible file formats. Just like other organizations out there, iPAD users are popping up and they want to view these video streaming from their iPAD.
That's why we are looking at Adobe Flash Media Encoder3 and Flash Media Streaming Server 4.5. My questions for the experts out there are:
1. Can Adobe Flash Media Encoder and Adobe Flash Media Streaming Server can replace our current solution?
2. Do we need both Flash Media Encoder and Flash Media Streaming Server or can Flash Media Streaming Server also can encode video feed?
3. Can Flash Media Encoder and Flash Media Streaming Server can run on the same server?
4. Our Windows Media Services server also has few on-demand publishing points along with a live video streaming. Can above mentioned Adobe products support having live streaming publishing point along with on-demand video publishing points?
5. Does Adobe Flash Media Encoder only support Flash and Quicktime or does it also support .wmv?
I called the sales to find the answers to these questions but he basically read the features listed on the Adobe product website and couldn't really answer these questions.
Any help in find the answers to these questions will be greatly appreciated.
Thanks you.FYI - I was able to do it by using the "onFI" handler of the embedded NetStream object.
myVideo.addEventListener(fl.video.VideoEvent.STATE_CHANGE, onVideoStateChange);
function onVideoStateChange(evt:fl.video.VideoEvent)
// trace("State = " + evt.state);
if ( evt.state == "playing" )
if (!ns)
ns = myVideo.getVideoPlayer(evt.vp).netStream;
ns.client.onFI = onFIHandler;
function onFIHandler(infoObj:Object):void
var ts:String = infoObj.st;
trace("system time: " + ts);
ExternalInterface.call("updateTimeStamp", ts); -
Camtasia + Flash Media Encoder 2
I am trying to use the Live Output feature of Camtasia Studio
5 along with Flash Media Encoder (and have also tried On2) to
capture my pc screen. When I try on Live Output on camtasia and set
the framerate to 60 fps and start it up, it actually says in the
recording window: Rate: 60fps (ranges from 55 to 60). However, as
SOON as I open up Flash Media Encoder or On2, they seem to attach
themselves to camtasia and the Rate drops to 4-6fps! I have tried
everything I can think of to prevent this drop but I can't figure
out why FME or On2 are doing this, and the result is very poor
quality videos streamed to my channel at 5fps, when they have the
capability of being sent at 60. Any help on this issue would be
most appreciated. Many thanks,
DanI had the same problem and just resolve it a few minutes
ago!!!
ok for example if I need to add a user named "joe" and his
password will be "1234" I will type the following at the momand
promt:
users add -u joe -p 1234
please let me know if it's works -
Flash Media Encoder forum moved
Please go to the new location of the Flash Media Encoder
forum:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=15&catid=628&entercat= ySir i have a query
i install TV card in my system and flash media live encoder get encoding feed from the TV card and in video device selection i select 713xBDA analog capture which is shown in device selection drop down it is all ok but
i want to show this live feed on by flash palyer or my browser.
for camera we use get camera function and others but for TV card i dont know please tell me the any tutorials or any code script etc.
plzzzzzzzzzzz help me.
My FMLE get the input from tv card and tv card device is show in device drop down list which is "713xBDA analog capture" it is all ok
but problem is that i don't how to flash script get the "input" and "record" from this device directly. or through FMLE.
which is possible
Get Input and record:
TV card --> FMLE -->flash player (flash scprit required)
TV card-->flash player (flash scprit required) -
Is mp3 support going ot be added to Flash Media Encoder?
Hi everyone,
I work at CNET in the Entertainment division and we recently
launched a full on Flash video player
Example:
http://www.gamespot.com/video/918428/6172011/fallout-3-official-trailer-1
On the side for the past few months we have been testing
On2's Live Flash encoder and Adobe's Flash Media Encoder with
Akamai. Because of features lacking (like de-interlace) in On2's
encode, we have no choice but to use Adobe's encoder.
While there are something I wish would be added like full on
multi-thread support (considering On2VP6 is so CPU intensive),
though that's more of an On2 thing (maybe Adobe can pressure them
since Dual-Core/Quad-Core systems are the norm these days and the
On2VP6 does little to utilize it), one thing that has really urked
us is the choice for the Nellymoser codec to be the only option for
audio in the Flash Media Encoder (and On 2's).
We want to migrate from webcasting in Windows Media to Flash,
but our audience feedback has been horrible with the Flash live
streaming because of the terrible audio codec we are forced to use.
Which leads me to my question --- is there going to be any
updates in the near future to allow us to use mp3 as the audio
codec? We have several machines on order just to handle Flash Live
streaming using Adobe's software and going by user feedback, we
simply cannot do it...so we are gonna have to be forced to have
Windows Media player within our Flash which is going to kill the
user experience.
Anyhow, just hoping to hear a good answer. Have the same
question into On2's support....
DaveI recently read on one of the listservs (not sure which one
it was... maybe the flashcomguru.com list?) that the next version
of FME will use hardware acceleration, so that should alleviate
some of the processor load. Of course, this is third party info I'm
passing along, so take it with a grain of salt.
About MP3, I'm not so sure I'd hold my breath on that one.
Problem is, FME is a free product, so I don't know if Adobe will
see value in shelling out the cash for the licensing required to
support mp3 encoding (money that will never be directly recovered).
They already have the licensing for ASAO, and as I understand
things, that ASAO license is the reason you can only use FME if you
own FMS or have an active account with one of their partner CDN's
Incidentally, this is a user-end forum, and I don't see a
strong presence from the Adobe employees around here (some, but not
a whole lot). If you were using FMS (rather than a CDN) I'd suggest
contacting Adobe support directly, but I've heard that support
requests from non-purchasers tend to fall to the bottom of the pile
indefinitely. -
Welcome to the Flash Media Encoder Forum
Welcome to the Adobe Flash Media Encoder forum! Ask
questions, discuss, and share feedback with other Flash Media
Encoder users.rSir i have a query
i install TV card in my system and flash media live encoder get encoding feed from the TV card and in video device selection i select 713xBDA analog capture which is shown in device selection drop down it is all ok but
i want to show this live feed on by flash palyer or my browser.
for camera we use get camera function and others but for TV card i dont know please tell me the any tutorials or any code script etc.
plzzzzzzzzzzz help me.
My FMLE get the input from tv card and tv card device is show in device drop down list which is "713xBDA analog capture" it is all ok
but problem is that i don't how to flash script get the "input" and "record" from this device directly. or through FMLE.
which is possible
Get Input and record:
TV card --> FMLE -->flash player (flash scprit required)
TV card-->flash player (flash scprit required) -
I have adobe flash media encoder 3.1 installed and am trying to stream downloaded .avi, .mpeg, and other video files to justin.tv using ManyCam, Everything seems to be working fine, video stream is clear and not choppy. Audio on my end is clear, and in Flash media Encoder i have "SigmaTel audio device" selected as my audio output (which is my stock audio driver)..however i keep getting complaints that there is no sound to my page on justin.tv. As far as i know all my drivers are installed properly and up to date. The green audio bar on FME shows no activity. Im wondering if this ****** SigmaTel excuse of an audio driver just doesnt get along with FME? There is no option to select "stereo mix" as other forums have said to do. Can anyone please help me get sound to my justin.tv page? Or help me find a way to instal a different audio driver that is compatible with a dell piece-o-**** dimension e520. I have downloaded Realtek HD Audio, SoundMAX drivers, and a few others but the only audio driver this piece of **** dell wants to recognize is the SigmaTel Audio Device, Which WONT OUTPUT SOUND TO FME!!!!!! PLEASE HELP!! TUMOUR IS GROWING!!
Can i not buy a set of surround sound speakers that are hooked up via USB and go around this problem? I really just want to get RID of SIGMATEL forever, and use REALTEK...but it wont recognize no matter how many times i download it. fml!"The audio preview in FMLE indicates there IS audio being input"
How do you know this?
are you "Saving to file"? how is the audio in the saved file?
Adninjastrator
Maybe you are looking for
-
Hi guy, I am using " Call 'SYSTEM' id 'COMMAND' field UnixCommand id 'TAB' field itFiles-SYS" to read number of files in folder, it works fine if number of line are around 200 but if its more then that it doesn't any file. UnixCommand = 'ls -ld'.
-
Can not view new photo's I have restored phone and still not working.
Can not view pictures on my iphone 4 I have upgraded to ios 5 a few days ago but this problem occurred today.
-
How can I open a disk using PowerPC application?
I have a program on a disc. With my new mac it is giving me an error message 'PowerPC application' no longer supported. I have to have this program loaded and completed for school Can someone advise?
-
I'm trying to completely wipe and reinstall Mountain Lion on an employee's laptop who has left. Disk utility won't let me wipe the drive unless I give it the decryption password. Is there a way to completely erase the volume to reinstall the OS?
-
Problem with Java in Parallels Desktop...what do you think?
Hi folks... 2 days ago,i bought a Macbook pro 13" and i've installed Parallels Desktop for working on(Windows XP service pack3)... i guess the problem is Java.. i use Business Objects XI program....(a tool for reporting....) To works,it's needs java