Flash Media Encoder problems

So I'm getting these 2 problems. I'm using Flash Media Encoder 2.5 on Windows 7 home. My upload speed in 2.1 mbs. I don't want to use FME 3.1 or 3.2 because they make my computer slower and I have the same problems.
First the preview screens are choppy. I'm recording a video game and both the input and output look like they have lag. But when I move my mouse across the area I'm recording the mouse moves perfecly fine, while at the same time, the game still looks choppy. Also it seems like whenever there is other activity like moving my browser around, typing or clicking the game, it looks perfectly fine. If tried both the low and high bandwith setting and they both have the same problem.
My second situation is with starting the program. When I click the start button, the session starts, but then instantly stops. I'm using Justin.tv so in the stream, it says I'm live with a screen shot of what I was recording.
Thank you for reading and I hope we can figure this out.

Could you please use any other device and see the difference? Does the issue happen with all the devices?

Similar Messages

Problem when streaming with the CLI flash media encoder 2.5

I have a problem when streaming with Flash Media Encoder 2.5. When I run the GUI, everything works, but when I use the commandline with the same profile I have created using the GUI, it says it can't connect to the server.
I have to use this version of the encoder, because the other is not working with the server, and I have to create a program to remotely control the flash media encoder, so I have to use the CLI. What can i do to go over this problem?
Any help would be really appreciated. Thankyou.

First of all, thankyou.
There is no authentication needed. I can't use Flash Live Media Encoder 3 because it is not supported by the people which manages the server i have to connect to.
In fact, I don't know why they dont support it, but that is the way it is.
Through the GUI, i connect directly and without problems, without user/pass.
Thankyou again.

Problem with Flash Media Encoder

We're having problems trying to use Flash Media Encoder in
conjunction with an Opsrey 230 card. The device shows up in the
Encoding Options panel but when we try to change any settings we
get the following error "Problem with video capture device. Please
verify that it is working correctly and is not already in use"
The card works fine with Windows Media Encoder. Viewcast
support suggested trying it again with SimulStream enabled, but
still no joy.
Can anyone help?
System - Windows XP Pro 2002 SP 2
Thanks
Phil

Doesn't look like any of your capture cards are on the
confirmed compatibility list... I wish there was a confirmed
INcompatible list (add three from above).
http://www.adobe.com/support/documentation/en/flashmediaencoder/FME_DeviceMatrix.pdf

Flash Media Encoder Live Problem

FME locks up good ! FME freezes . FME Stops sending streaming audio .
// I hope this is posted in the correct forum.
I'm using Adobe Flash Media Encoder Live 3.0.1.5963 .
Windows XP Pro SP 3
Pentium 4 3.06 ghz 'dual core' cpu
1.5 GB rambus 800 mhz
MP3
44,100
192kbps
stereo
When streaming audio, FME locks up good and stops sending audio, usually after 8 minutes.
I have to force down my machine with the reset button.
I even tried with no video. Same problem.

Update:
The same problem exists in Flash Media Encoder version
1.0.1.460.

Flash Media Encoder 3.1 Problem..

Okay so.. I just recently decided to start broadcasting on my new laptop which is windows 7 and a 64 bit and I reinstalled my Pinnacle software on this labtop and when I install the drivers and other needed programs such as this. So moving on to the problem, like many other people from what I see have similar problems like me about when you open Flash Media Encoder and then swap to your capture card it loads then black screens and finally instantly closes without warning.. I have pretty much gone through an ENTIRE day trying to get this to work.. I also went to my old labtop and tried it out there and for some reason it works an dis compatible there... Please I would appreciate some help as I would like to start broadcasting again..

Please try using FMLE commandline version FMLECmd and see if it works?
FMLE GUI has a known issue on Windows 7 starter and Home edition

Flash Media Encoder 8 - audio problem

I'm having an audio problem with Flash Media Encoder 8. I am
converting a long Quicktime movie to Flash - about 28 minutes.
After encoding, when I play it back, at about the 20 minute mark
the audio just drops out. I've developed somewhat of a workflow and
have done this with similar Quicktime files many times and have not
had this problem. Does anyone have any ideas as to what may be
happening? Anyone else see this?
Some specs:
Flash 8, Mac OSX 10.4.10, MacBook Pro C2D

Five Pi,
It may have something to do with the audio rate in your QT
video. When using encoder, make sure your audio rate of your QT
file is higher than the audio rate of your Encoder settings.
Its just a guess, I have had the same problems, but I set the
audio quality to very high when exporting from Final Cut Pro, and
then set them to medium quality in encoder, and no more audio
problems.
Steve

Flash Media Encoder 3.1, ManyCam, SigmaTel, Windows XP - No Audio output to FME or to Justin.tv

I have adobe flash media encoder 3.1 installed and am trying to stream downloaded .avi, .mpeg, and other video files to justin.tv using ManyCam, Everything seems to be working fine, video stream is clear and not choppy. Audio on my end is clear, and in Flash media Encoder i have "SigmaTel audio device" selected as my audio output (which is my stock audio driver)..however i keep getting complaints that there is no sound to my page on justin.tv. As far as i know all my drivers are installed properly and up to date. The green audio bar on FME shows no activity. Im wondering if this ****** SigmaTel excuse of an audio driver just doesnt get along with FME? There is no option to select "stereo mix" as other forums have said to do. Can anyone please help me get sound to my justin.tv page? Or help me find a way to instal a different audio driver that is compatible with a dell piece-o-**** dimension e520. I have downloaded Realtek HD Audio, SoundMAX drivers, and a few others but the only audio driver this piece of **** dell wants to recognize is the SigmaTel Audio Device, Which WONT OUTPUT SOUND TO FME!!!!!! PLEASE HELP!! TUMOUR IS GROWING!!
Can i not buy a set of surround sound speakers that are hooked up via USB and go around this problem? I really just want to get RID of SIGMATEL forever, and use REALTEK...but it wont recognize no matter how many times i download it. fml!

"The audio preview in FMLE indicates there IS audio being input"
How do you know this?
are you "Saving to file"? how is the audio in the saved file?
Adninjastrator

Flash Media Encoder 2.5

Hi--
I'm using Adobe Flash media Encoder 2.5 to stream Video & Audio to a web-site. For the past few days I've been unable to access my Channel on that web-'s Player or ANY other channels on the web-site-- after eliminating the browsers (as all 3 experience the same issue of non-accessibility to the web-site Player),and the fact that all 3 browsers PLAY OTHER Flash-encoded content, I have deduced the problem is with Flash Media Encoder as it keeps re-setting every 20 seconds or so indicating "Encoding & streaming to server is stopped due to aproblem in capturing Audio/Video"--however the settings are the same as when there was no problem. Anyone familiar with Flash Media Encoder 2.5 and any problems it may be experiencing? This has been ongoing for 4 days now
Screenshot below
Nleibo

I had the same problem and just resolve it a few minutes
ago!!!
ok for example if I need to add a user named "joe" and his
password will be "1234" I will type the following at the momand
promt:
users add -u joe -p 1234
please let me know if it's works

Camtasia + Flash Media Encoder 2

I am trying to use the Live Output feature of Camtasia Studio
5 along with Flash Media Encoder (and have also tried On2) to
capture my pc screen. When I try on Live Output on camtasia and set
the framerate to 60 fps and start it up, it actually says in the
recording window: Rate: 60fps (ranges from 55 to 60). However, as
SOON as I open up Flash Media Encoder or On2, they seem to attach
themselves to camtasia and the Rate drops to 4-6fps! I have tried
everything I can think of to prevent this drop but I can't figure
out why FME or On2 are doing this, and the result is very poor
quality videos streamed to my channel at 5fps, when they have the
capability of being sent at 60. Any help on this issue would be
most appreciated. Many thanks,
Dan

I had the same problem and just resolve it a few minutes
ago!!!
ok for example if I need to add a user named "joe" and his
password will be "1234" I will type the following at the momand
promt:
users add -u joe -p 1234
please let me know if it's works

Flash Media Encoder forum moved

Please go to the new location of the Flash Media Encoder
forum:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=15&catid=628&entercat= y

Sir i have a query
i install TV card in my system and flash media live encoder get encoding feed from the TV card and in video device selection i select 713xBDA analog capture which is shown in device selection drop down it is all ok but
i want to show this live feed on by flash palyer or my browser.
for camera we use get camera function and others but for TV card i dont know please tell me the any tutorials or any code script etc.
plzzzzzzzzzzz help me.
My FMLE get the input from tv card and tv card device is show in device drop down list which is "713xBDA analog capture" it is all ok
but problem is that i don't how to flash script get the "input" and "record" from this device directly. or through FMLE.
which is possible
Get Input and record:
TV card --> FMLE -->flash player (flash scprit required)
TV card-->flash player (flash scprit required)

Is mp3 support going ot be added to Flash Media Encoder?

Hi everyone,
I work at CNET in the Entertainment division and we recently
launched a full on Flash video player
Example:
http://www.gamespot.com/video/918428/6172011/fallout-3-official-trailer-1
On the side for the past few months we have been testing
On2's Live Flash encoder and Adobe's Flash Media Encoder with
Akamai. Because of features lacking (like de-interlace) in On2's
encode, we have no choice but to use Adobe's encoder.
While there are something I wish would be added like full on
multi-thread support (considering On2VP6 is so CPU intensive),
though that's more of an On2 thing (maybe Adobe can pressure them
since Dual-Core/Quad-Core systems are the norm these days and the
On2VP6 does little to utilize it), one thing that has really urked
us is the choice for the Nellymoser codec to be the only option for
audio in the Flash Media Encoder (and On 2's).
We want to migrate from webcasting in Windows Media to Flash,
but our audience feedback has been horrible with the Flash live
streaming because of the terrible audio codec we are forced to use.
Which leads me to my question --- is there going to be any
updates in the near future to allow us to use mp3 as the audio
codec? We have several machines on order just to handle Flash Live
streaming using Adobe's software and going by user feedback, we
simply cannot do it...so we are gonna have to be forced to have
Windows Media player within our Flash which is going to kill the
user experience.
Anyhow, just hoping to hear a good answer. Have the same
question into On2's support....
Dave

I recently read on one of the listservs (not sure which one
it was... maybe the flashcomguru.com list?) that the next version
of FME will use hardware acceleration, so that should alleviate
some of the processor load. Of course, this is third party info I'm
passing along, so take it with a grain of salt.
About MP3, I'm not so sure I'd hold my breath on that one.
Problem is, FME is a free product, so I don't know if Adobe will
see value in shelling out the cash for the licensing required to
support mp3 encoding (money that will never be directly recovered).
They already have the licensing for ASAO, and as I understand
things, that ASAO license is the reason you can only use FME if you
own FMS or have an active account with one of their partner CDN's
Incidentally, this is a user-end forum, and I don't see a
strong presence from the Adobe employees around here (some, but not
a whole lot). If you were using FMS (rather than a CDN) I'd suggest
contacting Adobe support directly, but I've heard that support
requests from non-purchasers tend to fall to the bottom of the pile
indefinitely.

Unable to instal Adobe flash media encoder.

Hi,
Im trying to get Adobe flash media encoder to work, but when i run the install file it stops initialising and say's could not initialise.
I tried the 3.1 version and the 3.2 version both do the same thing. I also downloaded adobe support advisor but it couldnt find a problem.
Iam running this on a macbook.
please help

Hi jurkooij,
Navigate to:
C/Program FIles(x86)/Common Files/Adobe/OOBE and rename to OOBE.old
C/Program FIles(x86)/Common Files/Adobe/Caps and rename to Caps.old.
Try to run the installer again.
Regards,
Romit Sinha

Adobe Flash Media Encoder not detecting internal camera

I'm running OS X 10.8.5 and it won't detect the camera. I've installed the latest update from Apple that's suppose to address this error. After installing the new update I reinstalled Adobe Flash Media Encoder and it still doesn't work. The camera is also not being detecting on Skype. Reisntalled this as well. Anyone running into the same problems post update?

Verify that you are using the latest Flash version that works with you system:
http://www.adobe.com/software/flash/about/
If you need to update, use your Mac's Disk Utility to repair permissions.
Then follow Adobe's instructions here:
http://kb2.adobe.com/cps/908/cpsid_90893.html
Be sure to uninstall your current Flash player before installing the new one.
Repair permissions again immediately following installation of the updated Flash player.
Be aware that the current Flash Player Preferences can be configured to block your camera in your Mountain Lion Mac's System Preferences. However, you still configure Flash settings as shown here: http://tinyurl.com/5kjv3
Message was edited by: EZ Jim
Mac OSX 10.8.5

Flash media encoder 3.1

Hello,
I am trying to stream my xbox 360 gameplay through justin.tv.
I am having major problems with this, the first problem is when i use the flash media encoder 3.1
The software that I am using is -
Totalmedia extreme
VHScrCap
Flash media encoder 3.1
The problem which I have is when i cap the screen which i want to broadcast and transfer it into FME3.1, the picture is all blocky and and dead pixelated.
When I look at the other ppl doing this on utube, there is a perfect picture. I have changed the frame rate and stuff like that, but no matter what i do, its still the same, does anyone how how to fix this.
This is my computer specs -
Inter core 2 Duo E7500 2.93Ghz
Corsair 4GBKit (2x2GB) DDR2 800
Samsung 500GB 16mb cache
Vista home prem 64bit
NForce 6101i-Itx Geforce 7050 Graphics.
Thank you.

I think FMLE forum would be right place to post this query - you can post it here: http://forums.adobe.com/community/flash/flash_media_live_encoder?view=discussions

Can't Activate Flash Media Encoder CS3

I just had a new hard drive installed on my Windows XP SP3, 4 GB RAM, 2 dual core Intel processors machine. I reinstalled Production Premium CS3. All of my Adobe applications activated except Flash Media Encoder CS3. When I enter my serial number, it says it is an incorrect number and places a big red X beside of the number. The number I entered is the number on the box.
I called Technical Support and held for them for over 1 1/2 hours but no one came on to answer my question. I entered the problem in the Support Portal but it has been over 24 hours and no one has contacted me. I like Adobe software but not their technical support.
Can anyone in the Forum help?
Thanks,
Linda

I've tried it (with cookies cleared) on three different browsers now and they all experience the same problem. I am on OS X but that should not affect my ability to connect to a particular server. Here, for example, is a non-functional download link I'm given: http://download.macromedia.com/pub/flashmediaserver/flashmedialiveencoder/installer/AdobeF MLE3.2.1_r.dmg

Flash Media Encoder problems

Similar Messages

Maybe you are looking for