Flash media server Admin Console 3.5 cannot connect to server
Hi to every one
I am new in FMS and installed FMS Development version 3.5
When i put server addess localhost OR 127.0.0.1 and other information username and password
then i press ok button it says worng information to login
Please tell me the correct information about the login server address.
Do any one have an idea what might have went wrong..
Regards
Sheeraz Kaleem
The username and password you entered when you installed the server are stored in the {RootInstallation}/conf/fms.ini file.
Let me know if that doesn't solve it.
Jody
Similar Messages
-
Flash Admin Console shows no applications on my Flash Media Server?
Hi all,
My employer has a Flash Media Server that I wrote a little streaming video app for a couple years ago. Well, the videos have stopped working and I've been asked to troubleshoot. I fired up the fms_adminConsole.swf and connected to my server. Now, it's been a long time since I've messed with the server, but if I remember right, there was a big list of apps on the list on the left hand side of the "View Applications" view of the console. When I log in, there are no applications listed. If I hit the "New Instance" button under the empty list, I'm presented with a list of all the apps I think I should be seeing in the Applications list. If I select any of these, a new application instance appears in the applications list, and I'm prompted to give it a name, the default being "_definst_". If I hit enter to create this instance, it remains on the list and instance data appears on the right panel until the console refreshes, and then all that vanishes and I'm back to an empty applications list again.
Going to "Manage Servers", I do see a list of applications under the applications tab that I expect to see. The app that streams the video that's having problems is there on the list.
Is this typical behavior for the Flash Media Server Console? Shouldn't I have a list of apps in the "View Applications" section of the console? I've created about a dozen to date, and they're all listed under Manage Servers > Applications, but not under "View Applications". Can anyone point out if I'm doing something wrong here or missing something? Or can someone confirm that I SHOULD be seeing something under "View Applications" and that there is indeed something weird going on with the server.
Thanks for any assistance!What you are seeing is correct behaviour. Until and unless applications are loaded or some clients are connected to them, they wont be shown under view applications tab by default. Try connecting to one of the applications you have and then you will see it automatically gets listed there.
-
Flash Media Server Update Process
Hi all,
I currently have Flash Media Server 3.5.0 installed and it has been running since 2009. It has been running for so long without issues I kind of forgot about it. Now i see there is an update to 3.5.7. I downloaded it but when I ran the installer it warned me that all my configuration settings may be lost. I tried to find some info on the best procedures to follow to perform the update but was unable to find much. I really do not want to lose my settings. I looked in the FMS admin console but i did not see any option to backup the current settings.
What is the best way to proceed with this update without losing your settings or negatively impacting the media server?Like Graeme Bull said in another related post : "You can keep up on that on the product manager's blog though http://blogs.adobe.com/ktowes/"
-
Hi,
I am developing an app for iPhone/iPad. The client wants to show some realtime data in the app. Something like a chat application, where even if users don't do anything (flash uses no event), they can see what other users are doing in realtime.
I went through adobe site to see Flash media Server for mobile device. But I am confused on which version of the server should suit the type of app I am developing.
Thanks,
SalimI'm more or less in the same boat. I've got the admin console
up. I am able to run the vodtest application locally pointing the
video file to rtmp://localhost/vod/sample.flv or using the server
name instead of localhost as in rtmp://mclmedia/vod/sample.flv
I can also load the html and swf file to my xp machine that
has access to the server via our internal network. (DNS isn't
configured yet) But the connectionFailed message appears when I try
to call the videos using rtmp://mclmedia/vod/sample.flv -
FMS4 -Set the Flash Media Server services to Run as Administrator (FMSCore not running)
Installed fms4 x64 on windows server 2008 to try it out. When i open up task manager to check processes running, FMSCore process does not runhttp://kb2.adobe.com/cps/862/cpsid_86205.htmlI found this in the knowledge base but step3 "Run this program As Administrator" checkbox is greyed out so i cannot do anything. I have stopped and restarted service so many time, rebooted server at least twice.
Even the video that's supposed to play when you click the start screen is not playingSet the Flash Media Server services to Run as Administrator
Complete the following steps for each of the following files located in the Flash Media Server root installation folder (C:/Program Files/Adobe/Flash Media Server, by default):
FMSAdmin.exe
FMSCore.exe
FMSMaster.exe
FMSEdge.exe
Right-click the file and chooseProperties.
Select the Compatibility tab and click Change Settings For All Users.
Select Run This Program As Administrator. Click Apply, and then click OK.
Complete these steps for each Flash Media Server service.
Restart the computer.
Flash Media Server starts when the computer starts.Hi,
Thanks for using FMS4.
When you said "
I have stopped and restarted service so many time, rebooted server at least twice. "
How did you make sure that the services are restarted ? Probably they have not yet started at all ? You need to have admin privileges to start/stop the FMS services. Please make sure you have the admin rights for the logged in user.
Open a command prompt as admin, and run the following commands :
net start fms
net start fmsadmin. -
How To Use Flash Media Server For RPG Game Development Project ?
I have a educational music video game development project (A Sea Voyage) for whcih I am thinking to use the Adobe Flash Media Server for develping the 3D Game for which I plan to also use two other key tools, blenderartist.org for 3D Creation of my ship, and use the popular game engine tool, unity.com to integrated all my game elements.
How to use the Adobe Flash Video Streaming Server Element for this RPG Type Game, internet friendly and desktop anchored ?
Cafe Twin
Metro Washington DC HubI'm more or less in the same boat. I've got the admin console
up. I am able to run the vodtest application locally pointing the
video file to rtmp://localhost/vod/sample.flv or using the server
name instead of localhost as in rtmp://mclmedia/vod/sample.flv
I can also load the html and swf file to my xp machine that
has access to the server via our internal network. (DNS isn't
configured yet) But the connectionFailed message appears when I try
to call the videos using rtmp://mclmedia/vod/sample.flv -
Flash Media Server & 123FlashChat
Hi All,
I've setup a chat room using 123FlashChat with webcams
enabled. Once in the chat room users can activate their webcams and
everyone can see each other and I can see the connections in the
Flash Media Server admin console. Any advice / assistance
appreciated on the following:
a) How do I record the sessions
b) How do I lock sessions down so they are only one-to-one?
Many thanksThe thing about FMS is that it doesn't do anything on it's
own. In order to get your application to record, it needs to be
programmed to record (there is no "magic switch" anywhere that will
start recording for you.)
So, you'll need to either reprogram the 123FlashChat
application to support recording, or build a new application that
does what you need it to. Based on what you wrote above, my advice
would be to build (or contract a programmer to build) an
application that suits your specific needs. -
Flash Media Server - Not playing sample flv
Finally managed to get FMS3 installed on fedora 9 with all
services running. Can connect to admin console and see new
connection from local host when running sample VOD client. However
video stays at loading on the test page. Thought i had cracked it
but fell at last hurdle. Any suggestions much appreciated.
RodSorry, I do not know Flash Media Playback, so I cannot help you.
You may try to post at http://forums.adobe.com/community/flash/flash-media-playback but there seems to be almost no activity there. -
Hi there,
I'm Very sorry for asking this. I guess it's a very basic problem, but I'm very new to Flash and Flash media Server and I need a very fast answer...
Currently I'm working on a Director project using a flash program which connects to Flash Media Server (I guess version 3, it's quite old). Unfortunately they forgot to make a flash method to send the actual userlist (or a notification when someone logged in or out) to Director. AND, unfortunately, they lost the source code of that flash programm, so I cannot look into it or alter it *sigh*.
Now I want to do a new flash programm which covers the old one, letting all known methods "pass trough" and building an additional method to gain the user list (or login/out notification).
How do I get the login information from Flash Media Server? (Would be good if you could provide an idea already for flash code... as I said I'm a tard at flash till now)
Thank you so much. And I hope you understand my situation asking here...
Janahparmar : yes, that's what I feared... I hoped it would be possible to tell the server from which application I do need the login information. What a mess.
Dimo Hristov: thanks for your offer! I already tried decompiling the flash program with the shareware version of Trillix Decompiler. It only decompiled the UI (in a terrible way) but no source code at all. It was the shareware version where I can decompile 2 or 3 programms to test the software. Are you sure the non-free version of Trilix Flash Decompiler will do..? -
Beginners guide to integrating Flash Media Server 2?
I'm a newbit to Flasha dn flash media server and need some
help with integrating the two products. We've just purchased Flash
Media Server 2 to stream user created videos to a website. Idealy
we would like to use the FlvPlayBack component placed on the stage
to display the FLV file from the media server, but cannont get the
component to access the FLV file.
Media Server Configuration:
On the Media Server we created an application (testapp) with
an default instance (_definst_). The directory path for the
Appliation looks like this W:\MediaApps\testapp\streams\_definst_\
The name of the server is MediaServer
The application and instance are appearing in the Media
Server Admin manager.
I've placed an FLV file (Movie.flv) In the _devinst_
directory.
Flash FLA file
Placed FLVPlayback component on the stage
Set contentpath= rtmp:\\MediaServer\testapp\_definst_\Movie
Set islive=true
When I test publish the file, the video does not display?
Does anyone have any guidance on what I need to do? There
seems to be a lack of documentation on integrating the media
server. I looked a sample app called "SimplePB" that works, but
does not use the FLVPlayback component.
Any help would be appreciated.
Thank you,
John WallworkJohn,
For an FLV to stream from FMS, it must be placed in the
streams/_definst_ directory...
applications/myApplication/streams/_definst_/myFlv.flv
Then you would type in the rtmp connection information in the
contentPath of the FLVPlayback component like this
rtmp://myRTMPConnectionInfo/myApplication/myFlv
without the flv extension.
The documentation comes from the FMS components when you
install them.
Here it is...
To set up your FCS for streaming FLV files:
Create a folder in your FCS application folder, and give it a
name such as my_application.
Copy the main.asc file into the my_application folder.
Create a folder named streams in the my_application folder.
Create a folder named _definst_ inside the streams folder.
Place your FLV files in the _definst_ folder.
To access your FLV files on the Flash Communication Server,
use a URL such as rtmp://my_servername/my_application/stream.flv.
For more information on administering the Flash Communication
Server, including how to set up a live stream, see the FCS
documentation at
www.macromedia.com/support/documentation/en/flashcom/. When playing
a live stream with FCS, you need to set the FLVPlayback property
isLive to true. For more information, see FLVPlayback.isLive.
Regards,
Bill -
Adobe Flash Media Server in Ubuntu
I have installed Adobe Flash Media Server in Ubuntu.
When I run the command
sudo ./fmsmgr server start
it says that Server: start command:
Server service start not found. Exiting
When I start adminserver in the same way,
the message displayed is :
Starting Adobe Flash Media Admin Server (please check /var/log/messages)
In the messages, the following is displayed :
Server starting...
Listener started ( FCSAdminIpcProtocol ) : localhost:11110/v4
Listener started ( FCSAdminAdaptor ) : 1111/v4
Server started (./conf/Server.xml).
Let me know if I am facing any issue because of the OS not being supported.If you navigate to path where FMS is installed say /opt/adobe/fms and then run ./server restart , do you get same error?
-
I can't connect to Flash Media Server 5 on UBUNTU
Hello everyone,
I install Flash Media Server 5 Extended edition with apache on UBUNTU SERVER 14.04 successfully.
Now when I type IP address in the other computer in the same network I can login to the Flash Media Server console but when I want to publish video from webcam or other devices to the media server I get the error "NetConnection.Connect.Failed"
I am newer in Linux please advise me to solve this problem.
Thanks in advance.Hello,
You are using the default discovery service : multicasting
Check if the multicasting is working on your system
http://radio.weblogs.com/0132383/stories/2004/05/21/mutlicastChecker.html
Else, you can switch to the other "Discovery service" : namingservice
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#CHDDDFEI
3.3 Configuring the Reports Server Discovery Mechanism
Regards -
Flash Media Server 4.5 unable to start setup on OS X 10.7
When I downloaded a developer edition from Flash Media Server page (11 Oct 2011). I tried to follow the setup instruction in readme.htm which comes in the zip of Linux version.
I logged in to terminal as root user and call './installFMS' and then the terminal show me:
ERROR: Your operating system is not supported by the
Adobe Flash Media Server installer.
Does it mean Flash Media Server Developer Edition cannot work on OS X Lion (10.7)?Hi,
No, that platform is not supported, for any of the FMS versions. -
FMLE not connecting to Flash Media Server
I have two laptops with windows 7 and FMLE 3.2 and FMS 4.5 in them. Laptop A is working perfectly with the default settings but i cannot connect to FMS with laptop B. I have tried turning windows firewall off, setting fmscore, fmscore and fmsmaster to run under administrator privileges.
The FMS starts correctly on laptop B (i compared the log-files on laptop a and b) and here is edge.00.log from laptop B (i censored my ip and host):
#Date: 2012-08-09
#Fields: date time x-pid x-status x-ctx x-comment
2012-08-09 12:37:37 3432 (i)2581173 FMS detected IPv6 protocol stack! -
2012-08-09 12:37:37 3432 (i)2581173 FMS config <NetworkingIPv6 enable=false> -
2012-08-09 12:37:37 3432 (i)2581173 FMS running in IPv4 protocol stack mode! -
2012-08-09 12:37:37 3432 (i)2581173 Host: myhost IPv4: myip -
2012-08-09 12:37:37 3432 (i)2631174 Listener started ( _defaultRoot__edge1 ) : localhost:19350/v4 -
2012-08-09 12:37:38 3432 (i)2631174 Listener started ( _defaultRoot__edge1 ) : 1935/v4 -
2012-08-09 12:37:38 3432 (i)2631174 Listener started ( _defaultRoot__edge1 ) : 80/v4 -
2012-08-09 12:37:39 3432 (i)2631174 Listener started ( _defaultRoot__edge1 ) : myip:19350 (rtmfp-core)/v4 -
2012-08-09 12:37:39 3432 (i)2631174 Listener started ( _defaultRoot__edge1 ) : 127.0.0.1:19350 (rtmfp-core)/v4 -
2012-08-09 12:37:39 3432 (i)2631509 Public rtmfp-core addresses for listener _defaultRoot__edge1 are: myip:19350 -
2012-08-09 12:37:39 3432 (i)2631174 Listener started ( _defaultRoot__edge1 ) : myip:1935 (rtmfp)/v4 -
2012-08-09 12:37:39 3432 (i)2631174 Listener started ( _defaultRoot__edge1 ) : 127.0.0.1:1935 (rtmfp)/v4 -
2012-08-09 12:37:39 3432 (i)2631174 Listener started ( _defaultRoot__edge1 ) : myip:80 (rtmfp)/v4 -
2012-08-09 12:37:39 3432 (i)2631174 Listener started ( _defaultRoot__edge1 ) : 127.0.0.1:80 (rtmfp)/v4 -
When i hit Connect button in FMLE i get the "Cannot connect to primary server" - error. When i change the FMS-Url to the ip-address of my laptop A i can connect to its FMS. The default FMS Url is rtmp://localhost/live and Stream: "mystream@38220" (this is working in laptop A).
I downloaded TCPView and compared whats happening with the laptops when i hit the Connect button. On laptop B FMLE sends bytes to FMSEdge and it responds with 1 byte and then nothing happens. On laptop A same thing happens but it opens up FMSCore and the stream starts going live.
Apparently the FMS had worked on laptop B before but then it stopped working due to reasons unknown. I tried reinstalling it with no results and now im clueless. I also tried the fmscheck and it said it cannot connect to FMS. It seems the FMSEdge is not behaving correctly or something is blocking the traffic between the programs. Please help.Access log looks like this:
#Date: 2012-08-09
#Fields: x-event x-category date time tz x-ctx s-ip x-pid x-cpu-load x-mem-load x-adaptor x-vhost x-app x-appinst x-duration x-status c-ip c-proto c-proto-ver s-uri cs-uri-stem cs-uri-query c-referrer c-user-agent c-client-id cs-bytes sc-bytes c-connect-type x-sname x-sname-query x-suri-query x-suri-stem x-suri x-file-name x-file-ext x-file-size x-file-length x-spos c-spos cs-stream-bytes sc-stream-bytes x-service-name x-sc-qos-bytes x-comment x-eid x-sid x-trans-sname x-trans-sname-query x-trans-file-ext x-trans-mode x-soffset x-codec-type x-codec x-plugin x-page-url x-smax-rec-size x-smax-rec-duration x-forwarded-for
server-start server 2012-08-09 12:35:42 FLE Daylight Time - 192.194.211.110 7492 0 48 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Then there is the master log:
#Date: 2012-08-14
#Fields: date time x-pid x-status x-ctx x-comment
2012-08-14 13:30:12 3216 (i)2581173 FMS detected IPv6 protocol stack! -
2012-08-14 13:30:12 3216 (i)2581173 FMS config <NetworkingIPv6 enable=false> -
2012-08-14 13:30:12 3216 (i)2581173 FMS running in IPv4 protocol stack mode! -
2012-08-14 13:30:12 3216 (i)2581173 Host: Tatu-PC IPv4: 192.194.211.110 -
2012-08-14 13:30:12 3216 (i)2571011 Server starting... -
2012-08-14 13:30:12 3216 (i)2581224 Edge (2992) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "C:\Program Files\Adobe\Flash Media Server 4.5\conf\server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgename "edge1". -
2012-08-14 13:30:12 3216 (i)2571111 Server started (C:\Program Files\Adobe\Flash Media Server 4.5\conf\server.xml). -
And the core log
#Version: 1.0
#Start-Date: 2012-08-09 09:35:26
#Software: Adobe Flash Media Server 4.5.0 r297 x86
#Date: 2012-08-09
#Fields: date time x-pid x-status x-ctx x-comment
2012-08-09 09:35:26 5380 (e)2571122 Server aborted. -
#Date: 2012-08-09
#Fields: date time x-pid x-status x-ctx x-comment
2012-08-09 11:51:27 1340 (e)2571122 Server aborted. -
#Date: 2012-08-09
#Fields: date time x-pid x-status x-ctx x-comment
2012-08-09 11:51:36 7848 (e)2571122 Server aborted. -
#Date: 2012-08-09
#Fields: date time x-pid x-status x-ctx x-comment
2012-08-09 12:35:43 7492 (e)2571122 Server aborted. -
I tried connecting to localhost:1935 with telnet and typing something and then watching what happens in TCPView. It says that the fmsedge process listening to port 1935 establishes the connection and receives the bytes, though it closes it after few seconds probably because it doesnt understand what data i sent. And when FMLE sends 1537 bytes to fmsedge it receives them but nothing happens. -
Hello
I don't see Flash Media Server Components from the Component
Panel pop up menu.
Is it normal ?
I use Flash MX with Flash Media Server 2.0.1
Can you help me please.
Thanks.The Flash Media Components are located at:
http://www.macromedia.com/devnet/flashmediaserver/articles/components.html
Be sure to read the readme for installation.
You will see trace statements and other important FMS
development data in
the Management Console when you view a running Application.
Lon Hosford
www.lonhosford.com
May many happy bits flow your way!
"avanthika" <[email protected]> wrote in
message
news:e2pmj6$pt8$[email protected]..
Hi
I too don't see flash media server components , media server
i am using is
installed on server, i am using Flash Mx 2004 professional,
How to get
access
to media server components.
i have one more problem, if i am using any trace in main.asc
file it is not
displaying, what i have to do, to trace the server side
values.
Thanks in advance
regards
Avanthika
Maybe you are looking for
-
Does 'Export Relative to Page Size' NOT work in Kindle books & some other ereaders?
Hi I've been looking at this issue that has made the wheels in my head work overtime! I've made a book with pictures for the Kindle store and all the images look too small. I've used Indesign 5.5 on a Win 7 PC. My file has multiple graphic images an
-
Hi. Where/how do order a new bottom cover for my macbook pro year 2009 ?
Hello, the bottom cover of my macbook pro (model 2009) is too much scratched and is looking horible already, i would like to echange it. Any ideas what would be the process? Cann i find such a piece online on apple site and order it or i would need t
-
Aging Statements for Accounts Recievables
Hi list, This is really not a Numbers-only question, but a financial formula one; I use spreadsheets to do my small business accounting, and have just realized that my interest on late payments from clients has not been compounded, just simple. So, I
-
Error in the content of Delivery output ASN outbound IDOC
Hi, I created an Delivery order for an SO and processed to PGI. Then the ASN Outbound idoc is triggered successfully! But when i checked the content of this ASN Outbound IDOC, i found some data were not populated into the IDOC from the Delivery order
-
How to set html bullet effect for text in text area
Hi All, How can i set html bullet effect for my text in text area. i need like hello world Can any help me. thanks Raghu