Flash Media Server...Other Version???

Okay so theres the Flash Media Server Professional Edition,
and Flash Media Server Developers Edition....
Is there another version aside from the above like Standard
or Lite? I've been looking but all I can find is the professional
version. I have my own linux server and a small website I would
like to add video chat too which requires a Flash Media Server, but
theres no way my website can cover the costs of the FMS PRO license
even after 4 years.
Is there any alternative? What are the restrictions on the
developers edition?
Thank you very much in advance.

Its Adobe Flash Media Interactive Server 3.5
http://www.adobe.com/products/flashmediainteractive/
Msg me here, on my email: [email protected] or skype: stoynev
Thanks.

Similar Messages

  • Live Instance in Flash Media Server 4.0 crashes/causes stream failure

    Hi,
    I have a Flash Media Server streaming version 4.0 server that is expierencing some issues.  Currently multiple inlet encoders are publishing live video content to this FMS.  At random times, the live_definst_ instance will crash and then restart itself.  The encoder does not recognize this new session and as a result, no new live video is being sent unless the encoder is stopped/started.  This cannot be done during live events, however. 
    I also have an enterprise version 4.0 that does not have this issue.  Is there a fundamental difference between the streaming/enterprise versions that would cause this issue and if so, is there any modifications that can be done to the streaming server that can fix this?
    Also I've noticed on the master logs that the enterprise server has various
    _defaultRoot_L_defaultVHost_:::_0 expierenced 1 failure's
    After this it seems like it starts.  However, the streaming server has this:
    _defaultRoot_L_defaultVHost_:::_0 expierenced 2 failure's
    Recovering core _defaultRoot_:::: with 2 failure[s] after 300 seconds!
    What exactly is this "recovering" process, could this be what is causing this issue?  Can I disable this in the config?

    You need to place the crossdomain.xml in the webroot folder. Create a text file in the webroot folder using notepad, and call it crossdomain.xml. The text below will give you a wide open access policy, which is fine for testing.
    <?xml version="1.0"?>
    <!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
    <cross-domain-policy>
              <allow-access-from domain="*" />
    </cross-domain-policy>
    For debugging HTTP streaming I recommend you get hold of something like Charles or Fiddler. These will greatly assist in pinpointing any issues.

  • How to check which version of flash media server is installed on

    Hi all.
    Is there any way to check which version of flash media server is installed on my computer?

    Hi Amit,
    Thank you for your reply. But I still cannot find the information in the log files.
    Flash meda server 3.5 has three versions: flash media Streaming server, flash media Interactive server and Development server. I would like to confirm which version above is installed on my computer. Is there a way to check for it?

  • Integrating Flash Media Server with other formats

    I would like to create a standard screen/player that can play
    any of the following formats:
    windows media files, all flash files, quick time files, real
    player files.
    So, for example, lets say I want to manipulate the screen to
    be an exact aspect ratio and have the same skin, and exact same
    controls as my flash files, but I don't want to work with Real
    Server or a Windows Media Server to serve these files what is the
    best approach to take ? i.e. a "Standardized" look and feel for all
    the formats listed.
    Where would I be able to get information that will help me
    achieve this ?

    There are two parts to this,
    Flash Media Server application - both client and server side. Check out the video conference app here http://www.adobe.com/devnet/flashmediaserver/sample_apps.html.
    The client side app will be a .swf file which you can develop in Flash/Flex.
    Second, you will have to embed this swf file in your asp.net page that will be delivered to browsers. I am not an expert in asp.net but googled a bit and get a feeling it's possible using
    tag.
    Also don't forget to check this link http://renaun.com/blog/2006/10/28/139/ for video conferencing app using flex and FMS.

  • OPTIONS OTHER THAN FLASH MEDIA SERVER

    HELLO ALL,
    I am trying to create a webcam recorder, i would like to know
    if there is a way of doing this without the use of the flash media
    server or an online adobe server account.
    thanks in advance.

    There are two alternatives to FMS that I am aware of
    Red5 (
    http://osflash.org/red5)
    Wowza Media Server (
    http://www.wowzamedia.com)
    Both are java servers, and AFAIK neitherhas support for
    server side actionscript (you'd need to code in Java or one of the
    other supported scripting languages). Red5 is open source, Wowza is
    about half the price of FMS (the last time I checked).

  • How to get list of logged-in users from Flash Media Server in a Flash programm? (Or login/logout notifications)

    Hi there,
    I'm Very sorry for asking this. I guess it's a very basic problem, but I'm very new to Flash and Flash media Server and I need a very fast answer...
    Currently I'm working on a Director project using a flash program which connects to Flash Media Server (I guess version 3, it's quite old). Unfortunately they forgot to make a flash method to send the actual userlist (or a notification when someone logged in or out) to Director. AND, unfortunately, they lost the source code of that flash programm, so I cannot look into it or alter it *sigh*.
    Now I want to do a new flash programm which covers the old one, letting all known methods "pass trough" and building an additional method to gain the user list (or login/out notification).
    How do I get the login information from Flash Media Server? (Would be good if you could provide an idea already for flash code... as I said I'm a tard at flash till now)
    Thank you so much. And I hope you understand my situation asking here...
    Jana

    hparmar : yes, that's what I feared... I hoped it would be possible to tell the server from which application I do need the login information. What a mess.
    Dimo Hristov: thanks for your offer! I already tried decompiling the flash program with the shareware version of Trillix Decompiler. It only decompiled the UI (in a terrible way) but no source code at all. It was the shareware version where I can decompile 2 or 3 programms to test the software. Are you sure the non-free version of Trilix Flash Decompiler will do..?

  • Windows Vista and Flash Media Server Streaming Problems

    My company recently started using Flash Media Server to
    stream audio and video content.
    My boss just installed Windows Vista Ultimate and now no
    streaming content will play at all. Simple Flash animations work,
    but nothing that accesses the Flash Media Server for content. I've
    uninstalled and reinstalled multiple versions of the Flash Player
    on his machine but nothing seems to work. I also tried the new
    "Reset" feature in IE that is supposed to return it to it's
    shipping state and that didn't work. I navigated to the "System 32"
    folder and ran the Flash Updater EXE. I downloaded and installed
    all of the available updates through "Windows Update".
    I also tested Flash Objects that stream video on Adobe.com
    and they don't play either. Has anyone heard of this happening or
    know what I need to do to fix it? I don't know if this is a bug in
    the Flash Player or with Windows Vista.

    This appears to be the solution:
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=44&catid=184&threadid =1243464&enterthread=y

  • Flash Media Server 3 / FlashPioneer Video Chat

    Just recently, I purchased and installed
    'FlashPioneerVideoChat'...
    I decided to use Flash Media Server 3 (developer addition)
    for the local server. The problem is you can't login to the FMS
    Server from the client end although all other communication aspects
    work fine. When a connection is made the login starts but doesn't
    open the application, it just keeps running. The Client side has
    been debugged and tested so that points to the Flash Server and
    whatever settings have to be made and/or code added to what file?
    Could someone please point me in the right direction, Thank
    you much ...
    [email protected]

    Hi, but doesn't the linux version work on a mac?
    I'm a bit confused here.
    I currently shoot video on a Canon mini dv camera and edit in Apple imovie.
    Convert to Apple Quicktime and then import into Flash 8 video encoder.
    I ftp the clips upto a flash server, from my mac and upload the playlist to my website host
    using Flash 8.
    Don't tell me i've now got to get one of those dreadful PC thingies to complete the loop,
    surely Adobe didn't invent this wonderful piece of software so it could run from a PC?
    Or did they?
    Andrew C-B.

  • WAMP and Flash Media Server

    I currently have WAMP(Windows, Apache,MySQL,PHP) installed as
    my primary server; I do not want to change this. What I would like
    to do is use Flash Media Server as my primary streaming server and
    be able to host media files on it. I have been informed that if I
    broadcast from the Media Server on Port 80 I will run into trouble
    when I start the WAMP server (because it works on Port 80). The
    resolution that I've been told is to put the Media Server on Port
    :8080. What I am trying to find out is if any one here is running
    the Flash Media Server as a second server using Port 8080 or is it
    smarter to just assign Flash Media Server it's own port. By the
    way, I am trying to set up a test environment that will replicate
    what the real server and application will have to do. Any advice is
    greatly appreciated. Thank You
    In2mobile

    what version of windows are you running?.......try shutting down fms service before making changes.......I know in windows 7 you have to right click choose properties of the folder fms.ini resides in and adjust the security settings.

  • Audio not streaming correctly from Flash Media Server

    Our company has a Flex application (3.0.2) that is having a problem with audio dropping out in Windows 7.  The problem appears worse with a wireless connection, but it can’t be consistently reproduced there, either.  The only thing known for sure is that the problem has not been seen on any other version of Windows.
    The application thinks the audio is playing, because it is calling the appropriate event listeners triggered when the audio completes and when any audio cue points are hit.  The majority of our audio is streaming via Flash Media Server (3,0,2,201), but the problem was also seen using embedded sound effects.  In one instance, several clicks of a button triggered an error saying the sound effect could not be loaded, and then about a minute later, all the sound effects played at once and the user could then continue with the application.
    The problem has been repeated in IE 8, Firefox 3 and Chrome.

    Thanks for your details. But i need more info.
    Server:
    FMS      3.0.2 ?
    FMS installed in which platform Linux/windows? more details about it.
    Client:
    IE          7
    Flash Player version     ?
    WIndows 7
    Wireless connection - Was the client placed in poor bandwidth.
    Can you get the NetStream status info when u play the audio file.? We can check for the rebuffering happening at the client side.
    Can you run your audio file through flvCheck Tool to check if the media file is in good form. It is available at "\$Root|Flash Media Server\tools\flvcheck.exe"
    Now our intention should be to check the same media file with simpler application (since your production app is complicated) to ensure that the media streaming over 'client to server' is working fine.
    Regards,
    Janaki L

  • Double-byte Chinese characters between Flash Media Server and WebLogic 9.2

    i have installed a FMS (Flash Media Server 4.0 developer edition) and a weblogic server on linux. The two servers communicate with each other via WebService (Axis2 on Weblogic 9.2). i can send some XML message from FMS to the Weblogic server and receive message. but the returned message from the Weblogic server is as follows:
    <?xml version="1.0" encoding="utf-8"?>
    <root>
    <response>
    <result>1</result>
    <reports >
    <test>x8054x901Ax6027x6D4Bx8BD5</test>
    </reports>
    </response>
    </root>
    the returned messages between the <test> and </test> tag can be decoded to "测试联通性" in Chinese via utf-8. why not the returned messages just show the result as :
    <test>测试联通性</test>
    Later i made another test: copy the war file in weblogic server to a apache-tomcat server, then the FMS send XML message to apache-tomcat and got the correct message as follows:
    <?xml version="1.0" encoding="utf-8"?>
    <root>
    <response>
    <result>1</result>
    <reports >
    <test>测试联通性</test>
    </reports>
    </response>
    </root>
    then what is the problem with my weblogic? what shall i do to solve the problem? thank you for anyone who gives me some advice.

    i have installed a FMS (Flash Media Server 4.0 developer edition) and a weblogic server on linux. The two servers communicate with each other via WebService (Axis2 on Weblogic 9.2). i can send some XML message from FMS to the Weblogic server and receive message. but the returned message from the Weblogic server is as follows:
    <?xml version="1.0" encoding="utf-8"?>
    <root>
    <response>
    <result>1</result>
    <reports >
    <test>x8054x901Ax6027x6D4Bx8BD5</test>
    </reports>
    </response>
    </root>
    the returned messages between the <test> and </test> tag can be decoded to "测试联通性" in Chinese via utf-8. why not the returned messages just show the result as :
    <test>测试联通性</test>
    Later i made another test: copy the war file in weblogic server to a apache-tomcat server, then the FMS send XML message to apache-tomcat and got the correct message as follows:
    <?xml version="1.0" encoding="utf-8"?>
    <root>
    <response>
    <result>1</result>
    <reports >
    <test>测试联通性</test>
    </reports>
    </response>
    </root>
    then what is the problem with my weblogic? what shall i do to solve the problem? thank you for anyone who gives me some advice.

  • How to integrate flash media server 4.0 live streaming for iOS devices ?

    Hi All,
    I have website which has live streaming module its working fine, same module i want to integrate for iOS devices. For live video streaming we are using FMS 4.0. So please let me know how we can integrate this for iOS devices using flash media server 4.0.
    Thanks in Adavnce
    Mohammad Sharique

    You need to place the crossdomain.xml in the webroot folder. Create a text file in the webroot folder using notepad, and call it crossdomain.xml. The text below will give you a wide open access policy, which is fine for testing.
    <?xml version="1.0"?>
    <!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
    <cross-domain-policy>
              <allow-access-from domain="*" />
    </cross-domain-policy>
    For debugging HTTP streaming I recommend you get hold of something like Charles or Fiddler. These will greatly assist in pinpointing any issues.

  • Domain issues with Flash Media Server

    I have a webcam streaming to Flash Media Server via the Media
    Encoder. I have published the .swf file with the flash player and
    rtmp://99.999.999.999:1935/live/livestream address to my website on
    a hosted webserver.
    When I am on another internet source, the player on my
    webpage loads and works fine. However when I load the webpage in a
    browser on the same network that has the Media Server and Webcam on
    it, the browser freezes up.
    I need some help with a solution that will cause the rtmp://
    address to switch to a local host address. Any suggestions.

    quote:
    Originally posted by:
    JayCharles
    Yes.. you can.
    But my old version of Flash MX show me an error message when
    I try to open "CommunicationComponents.fla" which contain the
    components of Flash Media Server 2.0.1.
    My old version of Flash MX can't read this file and say
    something like "Unexpected file format".

  • Flash Media Server 4.5 unable to start setup on OS X 10.7

    When I downloaded a developer edition from Flash Media Server page (11 Oct 2011). I tried to follow the setup instruction in readme.htm which comes in the zip of Linux version.
    I logged in to terminal as root user and call './installFMS' and then the terminal show me:
    ERROR: Your operating system is not supported by the
           Adobe Flash Media Server installer.
    Does it mean Flash Media Server Developer Edition cannot work on OS X Lion (10.7)?

    Hi,
    No, that platform is not supported, for any of the FMS versions.

  • Flash MX with Flash Media Server 2.0.1

    Hello
    I would like to know if I can use Flash MX with Flash Media
    Server 2.0.1 ?
    Thank you

    quote:
    Originally posted by:
    JayCharles
    Yes.. you can.
    But my old version of Flash MX show me an error message when
    I try to open "CommunicationComponents.fla" which contain the
    components of Flash Media Server 2.0.1.
    My old version of Flash MX can't read this file and say
    something like "Unexpected file format".

Maybe you are looking for