Flash media server working

Hello!
I am new to this server. I have installed the flash media
server2 but i could not run an application. I want the complete
procedure to make use of this server. If you can help me in this
regard plz help me as early as possible.
I want the complete procedure to run an application on client
side as well as on the server side.
thank you!

I've had enough responses now to realise that the server is
streaming beautifully - but only to my computer. It won't even work
from another computer on this network. I have checked that the
permissions on the Flash client are ok, and they seem to be. I
remember on my machine I had to followed some of the instructions
from
http://www.onyxservers.com/help/adobe_flash_video_streaming_guide.html
- see the part titled 'Troubleshooting Tip' - maybe my problem is
related to something like this - however the 'Troubleshooting Tip'
was for when the server was on the same machine - the problem I
have is with a real remote server.
It is almost like the Development version of fms is tied to
one machine! I don't know of any special relationship between my
the server and this desktop machine, except that this machine is
where the .flv files were created.
I have looked at the apache and tomcat log files - I can see
clients coming in and grabbing the .html and GETing the html and
swt files - but no errors. /var/log/messages doesn't have anything
but the server being started and stopped.
Also I have looked at all the log files in
/opt/adobe/fms/logs, but nothing looks like an error.
What can I do to diagnose this problem?
thanks - Chris

Similar Messages

Does Flash Media Server work with Wirecast?

Does Flash Media Server work with the encoding software, Wirecast?
Do any of you have experience integrating the two? Good or bad ?
I'm currently using Red5, which doesn't work with Wirecast, but I'd like to be able to use Wirecast.
Any advice would be appreciated!
Best wishes.

Thanks again for your help on this!
I'm very new at this and don't really understand :
if you've enabled SWF verification on the FMS side, and made an exception for the FMLe user-agent,
I haven't done anything as far as setting other verifications, etc. This is just a default install of the FMS 3.5 Developers version.
But I have tried all 3 user agents, still, none can connect. I still keep getting the "Can't publish stream... check credentials/tokens" error message 4020.
Any other thoughts/ideas?
Best wishes.

Does flash media server works with debian?

Can somebody tell me if there is a version of Flash media
server for Debian Linux?

Yep, just take the redHat version and modify the installer
script, use update-rc.d where redhat use chkconfig, that's it,
worked fine for me except the server crash once in a while with no
reason, no problems found in the log, still searching if it's my
server hardware or a software (fms) problem... but I didn't run the
adminserver and it's stable now...
Good Luck

Flash media server only works local on server

i just installed a developers version of the flash media
server on a windows server.
i don't have any problems while starting my applications on
the server itself.
the problem only appears when i try to connect from a
different computer which is not located in this network,
at least a connection from "outside".
there is no firewall right now on that server that this can't
be the problem.
when starting the media server by the managment console i
also do login with the domain-name of the server and not with
localhost...locally all is working well...but not from outside.
i also try to test port 1935, 443 and 80, but none succeed
from outside.
what i also tried is to run a version of the flash
communication server 1.5 on my home pc also running a windows
server. in this case i had the same problems: could only get a
connection locally but not from outside...i.e. the connection to
the server failed.
anyone an idea?

FMS3 is officially support on Windows 2003 server &
RHEL-4 only.

How to get list of logged-in users from Flash Media Server in a Flash programm? (Or login/logout notifications)

Hi there,
I'm Very sorry for asking this. I guess it's a very basic problem, but I'm very new to Flash and Flash media Server and I need a very fast answer...
Currently I'm working on a Director project using a flash program which connects to Flash Media Server (I guess version 3, it's quite old). Unfortunately they forgot to make a flash method to send the actual userlist (or a notification when someone logged in or out) to Director. AND, unfortunately, they lost the source code of that flash programm, so I cannot look into it or alter it *sigh*.
Now I want to do a new flash programm which covers the old one, letting all known methods "pass trough" and building an additional method to gain the user list (or login/out notification).
How do I get the login information from Flash Media Server? (Would be good if you could provide an idea already for flash code... as I said I'm a tard at flash till now)
Thank you so much. And I hope you understand my situation asking here...
Jana

hparmar : yes, that's what I feared... I hoped it would be possible to tell the server from which application I do need the login information. What a mess.
Dimo Hristov: thanks for your offer! I already tried decompiling the flash program with the shareware version of Trillix Decompiler. It only decompiled the UI (in a terrible way) but no source code at all. It was the shareware version where I can decompile 2 or 3 programms to test the software. Are you sure the non-free version of Trilix Flash Decompiler will do..?

Windows Vista and Flash Media Server Streaming Problems

My company recently started using Flash Media Server to
stream audio and video content.
My boss just installed Windows Vista Ultimate and now no
streaming content will play at all. Simple Flash animations work,
but nothing that accesses the Flash Media Server for content. I've
uninstalled and reinstalled multiple versions of the Flash Player
on his machine but nothing seems to work. I also tried the new
"Reset" feature in IE that is supposed to return it to it's
shipping state and that didn't work. I navigated to the "System 32"
folder and ran the Flash Updater EXE. I downloaded and installed
all of the available updates through "Windows Update".
I also tested Flash Objects that stream video on Adobe.com
and they don't play either. Has anyone heard of this happening or
know what I need to do to fix it? I don't know if this is a bug in
the Flash Player or with Windows Vista.

This appears to be the solution:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=44&catid=184&threadid =1243464&enterthread=y

Beginners guide to integrating Flash Media Server 2?

I'm a newbit to Flasha dn flash media server and need some
help with integrating the two products. We've just purchased Flash
Media Server 2 to stream user created videos to a website. Idealy
we would like to use the FlvPlayBack component placed on the stage
to display the FLV file from the media server, but cannont get the
component to access the FLV file.
Media Server Configuration:
On the Media Server we created an application (testapp) with
an default instance (_definst_). The directory path for the
Appliation looks like this W:\MediaApps\testapp\streams\_definst_\
The name of the server is MediaServer
The application and instance are appearing in the Media
Server Admin manager.
I've placed an FLV file (Movie.flv) In the _devinst_
directory.
Flash FLA file
Placed FLVPlayback component on the stage
Set contentpath= rtmp:\\MediaServer\testapp\_definst_\Movie
Set islive=true
When I test publish the file, the video does not display?
Does anyone have any guidance on what I need to do? There
seems to be a lack of documentation on integrating the media
server. I looked a sample app called "SimplePB" that works, but
does not use the FLVPlayback component.
Any help would be appreciated.
Thank you,
John Wallwork

John,
For an FLV to stream from FMS, it must be placed in the
streams/_definst_ directory...
applications/myApplication/streams/_definst_/myFlv.flv
Then you would type in the rtmp connection information in the
contentPath of the FLVPlayback component like this
rtmp://myRTMPConnectionInfo/myApplication/myFlv
without the flv extension.
The documentation comes from the FMS components when you
install them.
Here it is...
To set up your FCS for streaming FLV files:
Create a folder in your FCS application folder, and give it a
name such as my_application.
Copy the main.asc file into the my_application folder.
Create a folder named streams in the my_application folder.
Create a folder named _definst_ inside the streams folder.
Place your FLV files in the _definst_ folder.
To access your FLV files on the Flash Communication Server,
use a URL such as rtmp://my_servername/my_application/stream.flv.
For more information on administering the Flash Communication
Server, including how to set up a live stream, see the FCS
documentation at
www.macromedia.com/support/documentation/en/flashcom/. When playing
a live stream with FCS, you need to set the FLVPlayback property
isLive to true. For more information, see FLVPlayback.isLive.
Regards,
Bill

Flash Media Server 3 / FlashPioneer Video Chat

Just recently, I purchased and installed
'FlashPioneerVideoChat'...
I decided to use Flash Media Server 3 (developer addition)
for the local server. The problem is you can't login to the FMS
Server from the client end although all other communication aspects
work fine. When a connection is made the login starts but doesn't
open the application, it just keeps running. The Client side has
been debugged and tested so that points to the Flash Server and
whatever settings have to be made and/or code added to what file?
Could someone please point me in the right direction, Thank
you much ...
[email protected]

Hi, but doesn't the linux version work on a mac?
I'm a bit confused here.
I currently shoot video on a Canon mini dv camera and edit in Apple imovie.
Convert to Apple Quicktime and then import into Flash 8 video encoder.
I ftp the clips upto a flash server, from my mac and upload the playlist to my website host
using Flash 8.
Don't tell me i've now got to get one of those dreadful PC thingies to complete the loop,
surely Adobe didn't invent this wonderful piece of software so it could run from a PC?
Or did they?
Andrew C-B.

WAMP and Flash Media Server

I currently have WAMP(Windows, Apache,MySQL,PHP) installed as
my primary server; I do not want to change this. What I would like
to do is use Flash Media Server as my primary streaming server and
be able to host media files on it. I have been informed that if I
broadcast from the Media Server on Port 80 I will run into trouble
when I start the WAMP server (because it works on Port 80). The
resolution that I've been told is to put the Media Server on Port
:8080. What I am trying to find out is if any one here is running
the Flash Media Server as a second server using Port 8080 or is it
smarter to just assign Flash Media Server it's own port. By the
way, I am trying to set up a test environment that will replicate
what the real server and application will have to do. Any advice is
greatly appreciated. Thank You
In2mobile

what version of windows are you running?.......try shutting down fms service before making changes.......I know in windows 7 you have to right click choose properties of the folder fms.ini resides in and adjust the security settings.

Audio not streaming correctly from Flash Media Server

Our company has a Flex application (3.0.2) that is having a problem with audio dropping out in Windows 7. The problem appears worse with a wireless connection, but it can’t be consistently reproduced there, either. The only thing known for sure is that the problem has not been seen on any other version of Windows.
The application thinks the audio is playing, because it is calling the appropriate event listeners triggered when the audio completes and when any audio cue points are hit. The majority of our audio is streaming via Flash Media Server (3,0,2,201), but the problem was also seen using embedded sound effects. In one instance, several clicks of a button triggered an error saying the sound effect could not be loaded, and then about a minute later, all the sound effects played at once and the user could then continue with the application.
The problem has been repeated in IE 8, Firefox 3 and Chrome.

Thanks for your details. But i need more info.
Server:
FMS      3.0.2 ?
FMS installed in which platform Linux/windows? more details about it.
Client:
IE          7
Flash Player version     ?
WIndows 7
Wireless connection - Was the client placed in poor bandwidth.
Can you get the NetStream status info when u play the audio file.? We can check for the rebuffering happening at the client side.
Can you run your audio file through flvCheck Tool to check if the media file is in good form. It is available at "\$Root|Flash Media Server\tools\flvcheck.exe"
Now our intention should be to check the same media file with simpler application (since your production app is complicated) to ensure that the media streaming over 'client to server' is working fine.
Regards,
Janaki L

Integrating Flash Media Server with other formats

I would like to create a standard screen/player that can play
any of the following formats:
windows media files, all flash files, quick time files, real
player files.
So, for example, lets say I want to manipulate the screen to
be an exact aspect ratio and have the same skin, and exact same
controls as my flash files, but I don't want to work with Real
Server or a Windows Media Server to serve these files what is the
best approach to take ? i.e. a "Standardized" look and feel for all
the formats listed.
Where would I be able to get information that will help me
achieve this ?

There are two parts to this,
Flash Media Server application - both client and server side. Check out the video conference app here http://www.adobe.com/devnet/flashmediaserver/sample_apps.html.
The client side app will be a .swf file which you can develop in Flash/Flex.
Second, you will have to embed this swf file in your asp.net page that will be delivered to browsers. I am not an expert in asp.net but googled a bit and get a feeling it's possible using
tag.
Also don't forget to check this link http://renaun.com/blog/2006/10/28/139/ for video conferencing app using flex and FMS.

A User Count in a Flash Media Server Application

hello guys, first of all, sorry for my english...
i am making a flash media server application and i want users to see that how many users are currently connected to this application...
i have searched on google for 2 days and i couldnt find a good tutorial for AS3.
i have looked at fmsguru and some other tutorial websites but those wasn't enough for me to succes...
what i am trying to make is; a text area or dynamic text (i dont know which is most suitable for this purpose) which shows the numbers of connected user and i want it change immediately when a user connects or disconnects...
i know there is an array as "application.clients" and i know i should use "application.clients.length" in "main.asc" file to find the number of connected users BUT i can't get this number to the text area or dynamic text in my "swf file".
PLEASE help me by explaining a simple application which uses a "main.asc" file, an "action script" file and a "swf" file. and how to get the number of "application.clients.length", how to send (or call or get) it to the "action script" file, how to show this number in a text field or dynamic text...
i will be very appreciated if someone explain in AS3 and make me success...
thanks for reading...

well here you don't even need the button just tell your textfield to update everytime the server calls after a connection or disconnection. Do you know how to write actionscript at all? Because you would be well advised not to attempt media server stuff unless you know how to do the basics. Maybe you could start out with some client only applications.
import mx.controls.TextArea;
import mx.controls.Button;
import mx.utils.Delegate;
class SimpleChat_call extends MovieClip {
private var myTextArea:TextArea;
private var myButton:Button;
private var _nc:NetConnection;
private var _chatSO:SharedObject;
private function onLoad() {
myButton.addEventListener("click", Delegate.create(this, onUserCount));
public function connect( rtmpString:String) {
_nc = new NetConnection();
_nc.owner = this;
_nc.onStatus = function ( info ) {
if(info.code == "NetConnection.Connect.Success") {
trace("connected successfully");
this.owner.connectSO( this );
_nc.receiveUsercount = function (count) {
var myTextArea = this.owner.myTextArea;
myTextArea.text = count;
_nc.connect(rtmpString);
private function connectSO( nc ) {
_chatSO.connect( nc );
you didn't even try what i suggested did you because it would have worked without changing the client

How to integrate flash media server 4.0 live streaming for iOS devices ?

Hi All,
I have website which has live streaming module its working fine, same module i want to integrate for iOS devices. For live video streaming we are using FMS 4.0. So please let me know how we can integrate this for iOS devices using flash media server 4.0.
Thanks in Adavnce
Mohammad Sharique

You need to place the crossdomain.xml in the webroot folder. Create a text file in the webroot folder using notepad, and call it crossdomain.xml. The text below will give you a wide open access policy, which is fine for testing.
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="*" />
</cross-domain-policy>
For debugging HTTP streaming I recommend you get hold of something like Charles or Fiddler. These will greatly assist in pinpointing any issues.

Do I need Flash Media Server?

Hi all,
Sorry for this question, but I'm a bit confused. Is there a
way to broadcast live flash video using just flash, or do I NEED
Flash Media server. I don't really have the budget for it, and
don't really know another option if Flash doesn't work.
Thanks

You need a streaming server to do it. FMS is (IMO) the best
choice, but there are two others I know of
Red5 (
http://osflash.org/red5) . Red5
is an open source, free (as in beer), java based flash media
server. It's still in beta, but I hear it's shaping up to be a
pretty solid server.
Wowza Media Server (
http://www.wowzamedia.com)
also has a java based flash server in beta, and the beta program is
open to the public. The projected prices (on their site) put the
price at about half that of FMS.
Just curious, how many people do you need to serve at once?
If it's 10 or less, you can use the free FMS developer
license.

I can't connect to Flash Media Server 5 on UBUNTU

Hello everyone,
I install Flash Media Server 5 Extended edition with apache on UBUNTU SERVER 14.04 successfully.
Now when I type IP address in the other computer in the same network I can login to the Flash Media Server console but when I want to publish video from webcam or other devices to the media server I get the error "NetConnection.Connect.Failed"
I am newer in Linux please advise me to solve this problem.
Thanks in advance.

Hello,
You are using the default discovery service : multicasting
Check if the multicasting is working on your system
http://radio.weblogs.com/0132383/stories/2004/05/21/mutlicastChecker.html
Else, you can switch to the other "Discovery service" : namingservice
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#CHDDDFEI
3.3 Configuring the Reports Server Discovery Mechanism
Regards

Flash media server working

Similar Messages

Maybe you are looking for