Flash menu doesn't work after opening an external link.

Hi,
I have this problem - I made a simple website with a flash menu, that opens internal links in an iframe. However, I have a few other (not included in the menu) external links, which open in the same iframe. And after I click on one of them and it loads in the iframe, the buttons on the menu stop working. I'm beginning to think it has something to do with the internet explorer, since it works on some computers. But I'm not sure... not very good at this.
I've been searching for an answer here and there, but still haven't found anything. Please, help.
Thank you!

Here it is: http://kiss4eto.is.com/. Click on the Me button, for example. It should work. Then click on the "Addicted to Facebook" link on the right and after that try the Me button again. It doesn't work any more. At least on my computer.
Thanks, again.

Similar Messages

Macbook air adoble flash player doesn't work after installation

macbook air adobe flash player doesn't work after installation

If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 7. Back up all data before making any changes.
Step 1
You might have to log out or reboot before a Flash update takes effect.
Step 2
In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
If you get a warning of a "blocked" or "outdated" plug-in, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch the browser.
If the warning persists, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 6
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 7
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 8
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.

Flash Player doesn't work after update

I'm using windows 7 with Firefox browser. I installed an update and now Flash Player doesn't work.
I've tried re-installing but it still doesn't work.
Can you help please.

Please ask your question on a forum for the Flash Player

Why my adobe flash player doesn't work after installing update?

Hello,
I installed the latest update of adobe flash player but i still can't play videos on youtube, facebook, .... It keeps asking me to update to the latest flash player?
Can someone help me out with this?
Thx a lot!

Go step by step and test.
1. System Preferences > Other/ Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Quit Safari.
    Restart computer. Relaunch Safari.
2. Enable Plug-ins
    Safari > Preferences > Security
    Web Content: > "Enable Plug-ins".
       or
    Internet Plug-ins > "Allow all other plug-ins
3. Check whether you are currently in YouTube HTML 5 trial.
     http://www.youtube.com/html5
    At the bottom left of the page uncheck the box beside
   "You are currently in the HTML5 trial".
4. Reset Safari.
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
    Uncheck the boxes beside all items.
    Check the box beside "Remove all website data".
    Click "Reset".
5. Turn off Extensions, if any.
    Safari > Preferences > Extensions
     Now try YouTube.
Best.

Flash Player doesn't work after upgrade

I have Windows 7 Home Premium and I'm using IE 11. I have tried uninstalling/installing, deleting all files mentioned in multiple posts, used Firefox in attempt to install--all leave me at step 1. At best, the files appears to download and install correctly, but when I try to use it on multiple sites (Facebook games, YouTube, etc.), they all state that I need to install the latest version of Flash Player, which I just did. I tried the usual restart/shutdown/etc., all at periods as noted in posts. I have tried to download older versions of Flash Player, and I'm having the same issues. All Windows items are updated. I do not have any virus software running, and I have never had any problems with the updates in the past. Any help would be appreciated. Thanks.

Download this file: deepclean.zip
Unzip it.
Double click the deepclean_set.bat file. A command prompt window will open, and when the Disk Cleanup opens, check EVERY box in the list and click OK.
Double click the deepclean_run.bat file. The command prompt will open again and the Disk Cleanup will run, cleaning system cache files and other unnecessary items that may be responsible for your issue.
It may take a while to fully clean up your Hard drive.
DON'T close the command prompt window. It'll close when the cleanup finishes.
Afterward, download the Adobe Flash Player uninstaller and installers directly by right clicking the following links and selecting "Save target as" (IE) or "save Link as" (Firefox).
Flash Player Uninstaller
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Save the files to your Downloads folder - DO NOT RUN anything yet.
Reboot your system.
BEFORE opening anything, go to your Downloads folder and run the UNINSTALLER, then the ActiveX installer, and lastly the (other browsers) installer.

Popup doesn't work after opening an interactive form

Hi,
I would need your help in letting me know if there is any additional setting required for correct execution.
I tried executing the sample "WDR_TEST_ADOBE" web dynpro component. On execution, on the right hand context area, you will see a button "Display popup". When i click on this, the popup works fine.
Now, if I select "ZCI ->XML-Schnittstelle -> Version1 -> Editieren u2013 Form" from the left pane and now click on "display popup" the popup doesnt appear. It goes into an endless wait.
Could you please let me resolve the issue by letting me know what setting or configuration I am missing out, so that I would be able to execute this successfully.
Thanks & Regards,
Preethi.

Hi,
Could you please let me know if you too are facing similar issues with ethis program?
Best Regards,
Preethi.

Flash Player Doesn't Work After All My Efforts

I am trying to play a game when I get a script error. I click yes and am told that the Flash Player version is not correct or the ActiveX is active. I went through all the troubleshooting steps to no avail. Now what do I do?

http://forums.adobe.com/thread/867968

After update flash player doesn't work most of the time

Hi Folks!
Windows XP
IE 6
About 2 weeks ago I installed a flash player security update and ever since then flash player doesn't work most of the time. On most websites with embeded video all I see is an empty placeholder where the video is supposed to be.
If I go to a site like Youtube all is fine. However, if I go to a site that has embeded a Youtube video all I see is the empty placeholder where the video is supposed to be.
Some folks have recommended I uninstall and download and reinstall. The problem with this is that there isn't *anything* related to Abobe flash player in Add/Remove programs.
Not sure what to do about this (read: I'm totally lost!).
Here's a screencap of the empty placeholder:
http://i27.tinypic.com/2wrdttf.jpg

The standard warranty is for 12 months from the date of purchase, unless you bough AppleCare which would have extended it to 2 years.
If it's out of warranty, then you pay for repairs, and it's expensive. There are 3rd party repairers who are cheaper.
Did you try these?
The Five Rs.
As the previous poster said, it's more than likely a hardware issue, but there's no harm in trying the software fixes before you decide it needs repair.

Sound doesn't work(only in firefox). why? sound doesn't work(only in firefox). why? (adobe flash player doesn't work even thought it's installed)

sound doesn't work (only in firefox). adobe flash player doesn't work correctly, thought it's installed. can't solve the problem. i need Sound.
== This happened ==
Every time Firefox opened
== don't know

What does the Adobe test page say?
http://www.adobe.com/software/flash/about/
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
See also [[No sound in Firefox]] and [[Video or audio does not play]]

Flash CS6 doesn't work

Hello,
It has been a while since I worked with Flash, but once a year I have to edit a Flash file (with sponsors of a local event). Last summer I made the latest version of the file in Flash CS5. I've installed CS6 (the complete design&web premium package). Now I want to change the file that I made last year, but Flash CS6 doesn't work like it should. When I open the specific file, s small screen with the canvas is visible, I can't enlarge this screen, there are other windows available in the menu, but they won't show up when I activate them. I've tried to save the document as a CS5 file (I have a CS5 version on my laptop) but the file can't be opened (warning: this file has been created in Flash CS6).
When I try other menu-items, the program 'unexpectedly' stops.
In other words: I can't do anything anymore.
I've installed Flash CS6 again, but that doesn't solve the problem.
Is this a familiar issue? Can anyone help me?
Thanks
Joost
www.webuplease.nl

update:
- i'm still using cs5.5, but now have air3.3 overlayed
- i changed the render mode in the app.xml file to "direct" instead of "gpu" and republished
the app seems to display the graphics and dynamic text ok, but the stageVideos are not showing up.
suggestions greatly appreciated, thanks...

IPhoto 8.1.2 doesn't work after reinstalled the OS 10.6.8?

iPhoto 8.1.2 doesn't work after reinstalled OS 10.6.8?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

[Solved] Network doesn't work after hibernate?

Hello! This is my first legit Linux install so excuse me if I'm a bit slow. I installed Arch last night and everything went smoothly. However, after I tested out hibernate on my machine, the network doesn't seem to work. Just prior to the hibernate, I installed Pidgin and Skype but they worked alright, so I think that the hibernate caused a problem on eth0.
I have an Asus P8Z68-V Pro motherboard with an Intel 82579V Gigabit Ethernet Controller that's using the e1000e driver. Running "dmesg | grep e1000e" says that it is up.
I'm not entirely clear here, but from reading, I think that I have several ways of connecting to the network, including network, dhcpcd, networkmanager, and wicd. I am using wicd so I did the following (or at least I think I am only using wicd):
#rc.d stop network
#rc.d stop dhcpcd
#rc.d stop networkmanager
Similarly, I put a ! in front of network in rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=()
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="Vicious"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng dbus !network netfs crond wicd)
Restarting eth0 through wicd-cli still did not work. I also tried resuscitating the network via instructions on the configure network page before trying to focus solely on wicd.
I found a few similar problems on the forums by searching "wicd hibernate" and tried several solutions but they did not work. Several problems seem to be that the network doesn't work after a suspend because I guess the stuff in RAM did not get saved? But people were able to restart the network by running "/usr/lib/wicd/autoconnect.py" and I wasn't able to get this to work. As a final effort, I added "resume" into mkinitcpio.conf and placed the machine into sleep again to see if it may magically reset something but of course this did not happen .
mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata resume filesystems usbinput"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
Not sure if my fstab.conf is useful but if this has something to do with settings getting "lost" in swap, here it is. Linux is on an SSD and HDD (sda and sdc) and Windows 7 is on a HDD (sdb).
fstab.conf:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /tmp tmpfs nodev,nosuid,noatime,size=2000M,mode=1777 0 0
/dev/sda1 / ext4 defaults,noatime,discard 0 1
/dev/sda2 /home ext4 defaults,noatime,discard 0 2
/dev/sdc1 /boot ext4 defaults 0 1
/dev/sdc2 /var ext4 defaults 0 0
/dev/sdc3 swap swap defaults 0 0
/dev/sdc4 /media/data ext4 defaults 0 0
shm /dev/shm tmpfs nodev,nosuid,size=10G 0 0
Is wicd causing these problems or did I configure something else improperly? Would appreciate any help to get eth0 up again!
Last edited by TheBigCow7 (2011-09-13 17:57:20)

Ok, I think I've made some progress! Hibernate definitely affects my network connection. Could this be a kernel 3.0 problem?
I noticed that ifconfig showed eth0 without an inet addr, just an inet6 addr for the longest time. e1000e seemed to be loading up ok. I'm not certain here, but I think that meant the dhcp settings didn't stick, or something along those lines.
Trying to use dhcpcd like the instructions here did not work. By some chance, one attempt did work and while it did, I downloaded and installed dhclient. After that one successful attempt, renewing the DHCP lease via dhcpcd did not work again.
Luckily though, I found that running "dhclient eth0" worked. My DHCP settings seemed to have somehow gotten messed up after my initial, problematic hibernate to the point where none would stick, even after a reboot. Manually typing in "dhclient eth0" would get eth0 working, so I decided to add it to the bottom of /etc/rc.local, like in the example on the networking page.
Now, eth0 works after a boot. However, after the daemons load up during the boot process, my computer takes a long time to get to the login prompt (this is relatively speaking, since I am on a SSD and the boot process used to be blazing fast before). I'm pretty sure it's because I added "dhclient eth0" to /etc/rc.local.
I should say that even with these changes, after a hibernate, my eth0 still does not work and if it weren't for the edit to /etc/rc.local, eth0's inet settings would still not stick after a reboot (that is to say, the hibernate does do something to my network settings).
Is this the correct/most efficient way to fix my DHCP problem? Can I fix my "eth0 after hibernate" issue? Also, can I make my DHCP settings boot up without changes to /etc/rc.local so that I can get a fast boot again (still not sure how it was able to work before without my edit)?

Adobe Flash Player 11 NOT working after several attempts to download, uninstall, & reinstall

I have problems with Adobe Flash Player 11 NOT working after several attempts to download, then uninstall, & re-install.
I uninstalled the previous versions of Adobe Flash Player from my computer PRIOR to attempting to install the new 11 version, so now I'm unable to view videos, etc.,
I'm using Windows Vista 32 bit, Internet Explorer 9.0 (which I closed when I got error messages during Adobe Flash Player 11 Installation. I've disabled my AVG -Virus also during the installation of Flash Player 11.
FYI, I'm not computer savvy so the YouTube video by Adobe Tech was too complicated to follow AND I'm unable to view (DUH!) it since I have no Flash Player program installed (doesn't make sense!) .
Thanks for keeping it simple (KISS for me).

I've tried uninstalling and reinstalling some 30 times now ..rebooting, you name it.
I haven't been able to use flash since Adobe kindly shoved that latest update down my computer's throat.
Right after getting the 'successful' installation message I restart IE9 ..go to my channel on youtube and immediately get the message:
The Adobe Flash Player is required for video playback.
Get the latest Flash Player
I tried Chrome and on two or three it worked but then even after closing out of them ..Chrome slowed down to a crawl and finally informed me that Flash had stopped working.
This has entirely wasted 3 nights of my time. It is 2:30 am and I should have had at least 2hours sleep already to rise at 6:30 but no, thanks this I'm still up and no doubt millions of other computer users are having just as much fun.. Everyone I know that allowed the updates to install ..is having the same problem ..Chrome/IE9/Firefox ...you can truly call it Adobe's Universal Cluster ...
I live with Adobe. At work we have 6 fully Adobied LR4/CS5 & 6/InDesign workstations. I'm a photographer using nothing but Adobe products and quite frankly I feel this is the worst treatment you have ever given your customers.
Please stop the CYA and just fix the damm thing! I realize you didn't write it Chris but surely you can get Adobe management to address this instead of just trying to get their users to try and debug it for the airheads that released it. Has anyone stopped to consider the financial damage being done due to videos not playing the ads that support the sites and no doubt stream revenue to Adobe? These guys have rolled the online experience back 5 years minimum and Adobe will probably pay the price for it. Re-issue a working version and go back to the drawing board!

Sirius Internet Radio doesn't work after Snow Leopard

Sirius Internet Radio doesn't work after I installed Snow Leopard. It works on my Firefox. I emptied the cache on my Safari, but still nothing. Any solutions?

The reason why Sirius Radio online won't work with Safari anymore is because Sirius radio online is only supported by a 32-bit browser. Snow Leopard and all its applications are 64-bit. The best solution is to use firefox. If you still insist on using safari..... Go to adobe.com reinstall adobe flash player. Install/update Flip4Mac. Go to setting for Flip4Mac and check off all the options under the browser tab. Then when you go into Sirius Radio online, you will get an error message, just click okay. Then when you click a station, a quicktime player will come up and you will be able to listen to sirius online radio.
[email protected]

I have an iPhone 4S. When I try to print pictures, from my Windows computer, it doesn't work. Open Office also gives me an "unknown graphic" message. These are JPEGs, aren't they? Why can't I print and what is the unknown graphic?

I have an iPhone 4S. When I try to print pictures, from my Windows computer, it doesn't work. Open Office also gives me an "unknown graphic" message. These are JPEGs, aren't they? Why can't I print and what is the unknown graphic?

Hi,
"A day after the name change became official my built in skydrive app stopped working"
Did you point that SkyDrive changed to OneDrive?
Did you move your OneDrive to another location or change its name?
Please login OneDrive with web-based to check if you could access it successfully.
Please refer to the following article to try the troubleshooter and check the service status:
SkyDrive: FAQ
http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
Karen Hu
TechNet Community Support

Flash menu doesn't work after opening an external link.

Similar Messages

Maybe you are looking for