Flash Menu in a Template?

I can’t get my flash menu I created to show up in the
.dwt Template. It shows up in the editable region fine. When I
preview just the template it shows up fine. But it won’t show
up on pages based on the template. Hope that makes sense. Any
ideas?

If you want to use Flash for navigation, consider this -
1. Some people don't have Flash installed - what do they do?
2. Search engines don't parse Flash links - your site will
not be spidered
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
It's usually a very bad idea for these reasons...
In general, because of the EOLAS fix to how IE handles Flash,
and the
subsequent changes in DW, links to Flash elements WILL NOT BE
MANAGED BY
DREAMWEAVER. To work around this, you must make all such
links ROOT
RELATIVE, not document relative.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"JakeAllen" <[email protected]> wrote in
message
news:feog58$h5d$[email protected]..
>I can?t get my flash menu I created to show up in the
.dwt Template. It
>shows
> up in the editable region fine. When I preview just the
template it shows
> up
> fine. But it won?t show up on pages based on the
template. Hope that
> makes
> sense. Any ideas?
>

Similar Messages

Advanced flash menu tutorial

Hello everyone!
Is there any advanced tutorials showing how to create an advanced flash menu and header such as this one on the top:
http://images.osc3.template-help.com/wt_26184/index.html
I think my flash level is intermediat and I know how to design ordinary menu but this one here displays:
* Loading scene
* nice quickly animated objects in the movie introduction
also is there any Flash effects that I can include in Flash such as SwishMax effects, or do I have to create my own motion presets?

I'd recommend that if you want to use fancy Flash navigation like shown in the link above, do so using swfobject
http://code.google.com/p/swfobject/
and a complete set of alternate navigation buttons for non-Flash devices. That way you can have the best of two worlds... Flash and regular HTML/CSS navigation. This has actually been a Flash "Best Practice" for some time now.
The best way to properly set this up is to first provide the alternate content (in this case the navigation) then only after you have that working, add the Flash part.
Best wishes,
Adninjastrator

Flash Menu in Dreamweaver8

Where to start... I have a Flash menu that has very simple
buttons and each button has a link defined to a different page in
the website. The pages are on the host server and if I type that
address into a browser they open without any problems.
However, if I click on a button in the menu, it replicates
the site name twice and the page name at the end of it. So instead
of getting www.mysite.com/about.html it shows
www.mysite.com/www.mysite.com/about.html. I have double and triple
checked the buttons and deleted and recreated them a hundred times
but they always seem to duplicate the site url and then add it
again - which gives a page not found error.
Anyone with any ideas as to why this happens? Im a complete
newbie and this but can get around DW8 ok.
John

> And for those that do not have Flash
> installed, and want to use the objects, the code is
included to ask the
> user if
> they want to install it from the macromedia site.
Chances are, if they don't have it installed, your nag is not
going to push
them to do so. But if you have redundant HTML navigation,
then you are
covered.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"stylus01" <[email protected]> wrote in
message
news:f0flb8$jjd$[email protected]..
> Thanks to _seb_ as well.
>
> To Murray *ACE*, the pages have a left hand vertical
menu in html as well
> as
> the Flash Menu at the top so the links will be read, and
the pages passed
> the
> accessibility tests built into DW8. And for those that
do not have Flash
> installed, and want to use the objects, the code is
included to ask the
> user if
> they want to install it from the macromedia site.
>
> I'm not sure if you are suggesting that I know far too
little to put a
> website
> up, if you are, you may well be right, but I am teaching
myself and the
> things
> you mentioned above were drummed into me by a friend who
does this for
> living.
> I am going to make a lot of mistakes, some serious, some
not so, but I am
> going
> to continue to learn and do what I can.
>
> Thanks
>

Spry menu updating through template

I've created a number of pages based on templates that I designed. The templates use a horizontal spry menu. Now I want to hook everything up. But when I update the spry menu in the template it has no affect on the template based pages. When I save the template with the changes, I get the dialog box asking me if I want to update all the pages based on the template. So I say yeah update all of the selected files. But it doesn't update them. What am I missing? I had some issues removing the mark of the web code from the template. I got a message saying that changes to the template would no longer appear on child pages (or something similar). Could this be my problem?

Beth,
Thanks for asking. I have a couple of display issues that deal with spry data sets and a flash photo gallery, but those I can't resolve until I actually publish the site and can verify that the problem exists when viewed live. That way I can also link to the problem so others can see the issue. Those are display issues. The other issue is also a display issue, but it's one that I need to solve before I can publish my site.
I have started a discussion on this problem in the Dreamweaver forum, but since I still have the issue, I hope it's okay if I post here as well. The issue deals with a horizontal spry menu.
I have a page that displays a youtube video. It sits under the horizontal menu. When you try to select something from the drop down menu, the menu appears behind the youtube video (the links are hidden) and can't be selected. Someone on the Dreamweaver site checked out the link I provided and said that they didn't have any problems using Firefox. But I still can't see the menu with IE8 or Safari. Here's the link:
http://www.emiliocorsetti.com/publish/boot.html
That same person on the Dreamweaver forum suggested that I put the video in a div and give it a z-index. I tried that, but I'm really not sure what value to enter. The menubar has several z-index values ranging from 1000 to 1020. So I've tried the following values 900, 980, 990, 1030, 1040. No luck.
Emilio

Web flash menu

Hi,
i'm new to Flash and i would like to learn how can i do flash
menu for
web pages like we can see on :
http://www.freewebsitetemplates.com/
or
http://www.templatemonster.com/website-templates.php
where should i start ?
i'm basically looking for tutorials.
thanks a lot,
A.

so please, send it to rafnews (at) gmail (dot) com
The Feldkircher wrote:
> Hi
>
> I am currently doing a sample MenuBar for another
Postee, when I've finished I
> can send it to you as well.
>
> Send me a contact email address so I can forward it to
you when its ready.
>
> Ciao For Now
>

XML flash Menu

Hello Guys,
I am stuck with a xml flash menu which contains quite a few great options to manipulate the text, url, button and even change the color to the menu externally from xml. The only thing missing here (which I massively need it) is the option resizing the buttons from the xml file itself. The buttons need to be resized so that they fit each text length. I have the feeling that someone that is good at XML and deal with ActionScript would be able to easily add this option.
Thanks for commiting your time on this and I would be happy to help anyone in return who tackles this requirement I am after now.
Please download the file attached and you can own it as well.
Looking forward to hearing from you soon.
Respectfully yours,
Beko

Ok, here we go:
ACTION SCRIPT CODE:
_parent._visible = false;
// xml processing
menu_cfg_xml = new XML();
menu_cfg_xml.load(String(_url.slice(0, (_url.length-3)))+"xml");
menu_cfg_xml.ignoreWhite = 1;
menu_cfg_xml.onLoad = function(ok) {
    // create main menu after successful loading of XML
    if (ok) {
        create_menu();
    } else {
        trace("XML not loaded");
counter = 1;
function create_menu() {
    while (counter<menu_cfg_xml.firstChild.childNodes.length) {
        attachMovie("button_type", "btn"+counter, counter);
        set("btn"+counter+"._x", counter*80-100);
        btn1._y = 0;
        // set the buttons text
        set("btn"+counter+".the_text", menu_cfg_xml.firstChild.childNodes[counter].attributes.text);
        set("btn"+counter+".the_url", menu_cfg_xml.firstChild.childNodes[counter].attributes.url);
        set("btn"+counter+".the_target", menu_cfg_xml.firstChild.childNodes[counter].attributes.target);
        this["btn"+counter].onRollOver = this["btn"+counter].onDragOver=function () {
            this.effect.gotoAndPlay(2);
            this.textul1.textColor = "0x"+menu_cfg_xml.firstChild.childNodes[0].attributes.text_color2;
        this["btn"+counter].onRollOut = this["btn"+counter].onDragOut=function () {
            this.textul1.textColor = "0x"+menu_cfg_xml.firstChild.childNodes[0].attributes.text_color1;
            this.effect.gotoAndPlay(9);
        this["btn"+counter].onRelease = function() {
            if (this.the_url != undefined and this.the_url != "") {
                getURL(this.the_url, this.the_target);
        //set buttons color
        this["button_color"+counter] = new Color("btn"+counter+".btn_color");
        this["button_color"+counter].setRGB("0x"+menu_cfg_xml.firstChild.childNodes[0].attributes .button_color);
        //set button effect color
        this["effect_color"+counter] = new Color("btn"+counter+".effect");
        this["effect_color"+counter].setRGB("0x"+menu_cfg_xml.firstChild.childNodes[0].attributes .effect_color);
        //set button text color
        this["btn"+counter].textul1.textColor = "0x"+menu_cfg_xml.firstChild.childNodes[0].attributes.text_color1;
        counter++;
    _parent._visible = true;
    info_clip._visible = false;
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
XML CODE:
<?xml version="1.0" encoding= "UTF-8" ?>

<menu>
<options button_color="000066" effect_color="87A10C" text_color1="87A10C" text_color2="FFFFFF">
</options>
<button text="Task force" url="http://www.google.com" target="_parent">width="250" height="136"</button>
<button text="Service og turisme" url="http://www.google.com" target="_parent"></button>
<button text="Fodbold" url="http://www.google.com" target="_parent"></button>
<button text="Idraet" url="http://www.google.com" target="_parent"></button>
<button text="Kunst and Design" url="http://www.google.com" target="_parent"></button>
<button text="Teknisk/praktisk linje" url="http://www.google.com" target="_parent"></button>
<button text="Gastronomi" url="http://www.google.com" target="_parent"></button>
<button text="Laekker mad" url="http://www.google.com" target="_parent"></button>
<button text="Musik" url="http://www.google.com" target="_parent"></button>
<button text="Turbo-boglig" url="http://www.google.com" target="_parent"></button>
</menu>

Problem with Flash Menu in iWeb...need help please.

Ok, I designed a flash menu in iWeb and successfully placed it at the top of the site. I then used the "transparent shape" method to make the hyperlinks work properly. I made sure the flash menu was in the back and the transparent shape hyperlinks were in the front. The menu works just fine for me and anyone else using Safari or Mac computers. However, people on Windows using Firefox, IE or Chrome are unsuccessful in clicking the links. They do not work for them.
Here's my website's homepage link. Keep in mind, if you look there on Safari, it will work but it does not when on a Windows computer. Any help is greatly appreciated.
http://www.platinumsportspicks.com/Index/Home/Home.html
It is clearly the problem that the flash menu is opening in front of the hyperlinked shapes but I'm not sure how to make sure they stay on front.
Message was edited by: kwgrooms

I don't know the answer to that one but you can use the Mouse Over and Click method I have described on this page....
http://www.iwebformusicians.com/Tricks/MouseOver.html
It works in IE.
Its just a question of making up two different buttons with text for each link, taking a screenshot and cropping them and adding the JPEGs to your upload folder.
You can make up the buttons on an iWeb page and then delete them when you have taken the screenshots. I usually do this sort of thing in Keynote so that I can save them in case I need to modify them.

I don't want my flash menu to reload on every page

Hi everyone,
I have a website that I am working on where I have a menu
made in flash, the menu expands when you select a category item and
executes a hyperlink when you click on a particular item within the
category.
This hyperlink load a new page and reloads the flash menu
which causes the option pre-selected to get lost and you have to
select again the category item and item over an over again.
It is good to mention that I want to stay away from Frameset.
Is there a way to load a particular part of the site instead
of the while site, so my menu selection stays the same?
I read about <DIV ID=", BASE, REL and REV and they don't
seem to work for me. Is there a sample code that I can look at to
have better understanding of it?
Thank you in advance.

A good way to make it so it does not reload on every page is
to make a IFrame and make the target link of the flash buttons go
to the Iframe ("
http://staggdesigns.com" ,
"_TARGETFRAME") that will work

Inserting Flash in a DW template

I'm relatively new to Dreamweaver (version 8) and I'm having
a problem inserting a flash (.swf) slideshow of pictures into a
template that then updates several webpages. The problem is, when I
insert the flash into the template page and the webpages get
updated, the flash animation does not play on the webpages and just
has a white box. If I detach the template from the webpage, then
the flash displays correctly. But the problem with that is then
there is no point to using a template because I would have to
manually update each webpage instead of just the template when I
want to make a change to all the webpages. The problem must be with
the template, because when I try to attach the template to a very
simple webpage containing only a couple words and no other
graphics, the flash will not display correctly. Any ideas on what
is wrong or how I can insert a flash slideshow into a template so
that it updates the webpages correctly?

Make the link to the Flash element ROOT relative.
That way, the link doesn't need to be managed and will work
just fine in
your Template child pages.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"buckeyestargazer" <[email protected]> wrote
in message
news:gbreos$cpq$[email protected]..
> I'm relatively new to Dreamweaver (version 8) and I'm
having a problem
> inserting a flash (.swf) slideshow of pictures into a
template that then
> updates several webpages. The problem is, when I insert
the flash into
> the
> template page and the webpages get updated, the flash
animation does not
> play
> on the webpages and just has a white box. If I detach
the template from
> the
> webpage, then the flash displays correctly. But the
problem with that is
> then
> there is no point to using a template because I would
have to manually
> update
> each webpage instead of just the template when I want to
make a change to
> all
> the webpages. The problem must be with the template,
because when I try
> to
> attach the template to a very simple webpage containing
only a couple
> words and
> no other graphics, the flash will not display correctly.
Any ideas on
> what is
> wrong or how I can insert a flash slideshow into a
template so that it
> updates
> the webpages correctly?
>
>

Need help with installing Yahoo style flash menu CS5

I downloaded the Yahoo style menu bar from the the available widgets. I got the menu bar to show in Dreamweaver, but need help:
I have trouble understanding how to use the f-source flash editor to edit the links.
I don't seem to be able to drop the f-source.com button from the menu bar.
The bar shows up as a tiny bar in IE8, not as I had programmed it in the widget programmer.
I was instructed to Insert ==> f-source menus ==> Edit menu in Dreamweaver. Doing this leads to the following message: "Install at least one f-source menu'. I did install the f-source-UI G file in the Adobe Extension Manager CS5. What else needs to be installed?
My OS is Windows7 and I am working with Dreamweaver CS5. Please help.
Thanks,
Tony Uythoven

Flash menus (Flash navigation, period) is a terrible thing from a functional standpoint. It looks really nice, but the honeymoon ends there. As far as SEO goes, your entire site, beyond the landing page, is invisible. A search robot will only see an embeded Flash object.
You have to ask yourself a basic question.
1. What is the purpose of building a website and putting it online?
If it's for your own personal enjoyment and nothing more, then a Flash menu may be for you. If it's for a business or band, or a political group or social group, and you want people to be able to find it in Google, Yahoo, Bing, etc. then you want as many indexible links as possible on your landing page so they will show up in related searches like schedules, articles, galleries, etc.

Installed latest sec update and have flashing menu bar - cannot login

I also just installed the latest security update running 10.3.9 with a original 1ghz 17" powerbook.
Trying to boot afterwards I end up with a flashing menu bar and no disk icon on the desktop - obviously I can't login (set to single user)
Trying to repair permissions with a CD boot results in an "internal error" with the disk utility. Disk repair reports no problems. The program then cannot continue, and I have to hold the power button to get it to shut down.
Any ideas???
This is the LAST time I use the auto update!!!
17" powerbook 1ghz Mac OS X (10.3.9)
Mac OS X (10.4.2)

Hey. I am having almost the exact same problem my menu bar is flashing and no HardDrive icon on the desktop!?

Next and Previous slide from Flash Menu

We are currently tasked with updating SAP training that was
created with OnDemand software. The current simulations have a
Javascript menu on each screen which provides various functions
including moving from current slide to next or previous slides.
When the existing movie is played and captured, we lose the
javascript menu functionality.
I have created a Flash Menu and have imported it to the newly
captured Captivate movie. All links on the menu work except Next
Slide and Previous slide.
The script I use for the button for the Next slide is as
follows:
this.next_btn.onRelease =function(){
this._parent._parent..nextFrame();
Also I have tried substituting for nextFrame "play" and for
the target path "_root" for the first "_parent."
The variables "rdcmndNextFrame" and "rdcmndPrevious" do not
work unless you are using a playback bar, which detracts from the
simulation.
Has anyone ever created this type of functionality? It seems
that it would be straight forward. It is most likely a target path
issue. The captivate movie is the container for the flash menu. To
access the captivate movie timeline and move to the next or
previous slide is what I really need.
Help!

I resolved the issue by selecting to use a playback bar and
then in the Flash file setting the visibility of the playback bar
to "0".

Flash menu in DW, how do I link the buttons?

Hi there!
I have a problem, i'm creating a site in dreamweaver with a
lot of flash objects. For examlpe I'm making a flash menu, wich is
the hole problem! I'm importing the flash file to the left frame in
dreamweaver and i'm trying to link the buttons (on the menu) to ex.
"home" or "about me", though it doesn't work! I can't link the
buttons because they're in this flash object. I know i'm doing it
wrong with trying to link the buttons on the flash object but I
don't know what else to do. And the thing is that i don't wanna use
the buttons already existing in DW, i've made my own ones. The
buttons are moving so there is one more problem, they're coming in
from the right side (in the left frame) and bounces once, and then
they stop. And that's when I wan't them clickable. So how do I make
the buttons linking to the pages??
Would really appreciate an awnser!
Thanks !

Flash links are made in Flash, not DW.
I trust these links are not important, as search engines
can't see them
"Sabyonei" <[email protected]> wrote in
message
news:f1ktus$ct9$[email protected]..
> Hi there!
> I have a problem, i'm creating a site in dreamweaver
with a lot of flash
> objects. For examlpe I'm making a flash menu, wich is
the hole problem!
> I'm
> importing the flash file to the left frame in
dreamweaver and i'm trying
> to
> link the buttons (on the menu) to ex. "home" or "about
me", though it
> doesn't
> work! I can't link the buttons because they're in this
flash object. I
> know i'm
> doing it wrong with trying to link the buttons on the
flash object but I
> don't
> know what else to do. And the thing is that i don't
wanna use the buttons
> already existing in DW, i've made my own ones. The
buttons are moving so
> there
> is one more problem, they're coming in from the right
side (in the left
> frame)
> and bounces once, and then they stop. And that's when I
wan't them
> clickable.
> So how do I make the buttons linking to the pages??
> Would really appreciate an awnser!
>
> Thanks !
>

Flash Menu Style Help

I need to build a flash based menu and want to learn how to
do the same cool functionality that I see on the
http://grandcentral.com website.
Notice on the "features" menu how when you click on an item
the arrow will scroll down to that menu item. I'd like to learn how
to make a pointer move across multiple other items to get to the
one that is being clicked on like that. I hope it is easy enough
that I can do it!
Any help is most appreciated as I have a project I'm doing
right now that would really benefit from this.
Thanks in advance!
I work on a mac running osx and flash 8 pro.

Flash menus (Flash navigation, period) is a terrible thing from a functional standpoint. It looks really nice, but the honeymoon ends there. As far as SEO goes, your entire site, beyond the landing page, is invisible. A search robot will only see an embeded Flash object.
You have to ask yourself a basic question.
1. What is the purpose of building a website and putting it online?
If it's for your own personal enjoyment and nothing more, then a Flash menu may be for you. If it's for a business or band, or a political group or social group, and you want people to be able to find it in Google, Yahoo, Bing, etc. then you want as many indexible links as possible on your landing page so they will show up in related searches like schedules, articles, galleries, etc.

Flash menu target help

Well because I am only a year old to flash I bought a program
called Flash Menu Labs which helps me create a horizontal menu with
many branches. I have figured out how to import this into my
project using the loader component but i have some other questions.
I can add links to my menu items within Flash menu labs using
the open method and _self, _blank, _top, _parent but not sure which
one to use or how to get it to gotoandplay or how to open another
swf within my current project. So when I click one of my menu items
it will actually open or goto a frame in the project that i put the
menu.
Hope that makes some sense. I have enclosed some pictures to
help make some sense of this. The first picture shows the Flash
Menu Labs menu i created and you can see it works using the loader
component. The second picture shows the actual Flash Menu labs
layout screen.
Picture 1
picture
2

mikeoffy69 wrote:
> Well because I am only a year old to flash I bought a
program called Flash Menu
> Labs which helps me create a horizontal menu with many
branches. I have figured
> out how to import this into my project using the loader
component but i have
> some other questions.
>
> I can add links to my menu items within Flash menu labs
using the open method
> and _self, _blank, _top, _parent but not sure which one
to use or how to get it
> to gotoandplay or how to open another swf within my
current project. So when I
> click one of my menu items it will actually open or goto
a frame in the project
> that i put the menu.
>
>
> Hope that makes some sense. I have enclosed some
pictures to help make some
> sense of this. The first picture shows the Flash Menu
Labs menu i created and
> you can see it works using the loader component. The
second picture shows the
> actual Flash Menu labs layout screen.
>
This is not fully featured Flash application but tool
designated to crate just menus
and out put them into SWF format - Flash Player compatible .
You don't have the freedom
to add on your own action script, except the getURL requests.
You need actual Adobe Flash
authoring program to create Fla/SWF files and be able to use
action script at will.
I don't believe you will be able to even work on "Flash Menu
Labs" files. Beside export
to SWF, this tool has nothing to do with Adobe Flash. Using
Flash you will need to make
your menus entirely from scratch.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Flash Menu in a Template?

Similar Messages

Maybe you are looking for