Flash movie opens in browser with a white background

I have created a simple movie and placed it in an 'Under Construction' page. The whole page is meant to be black. When I open the browser a white box shows, where the movie will appear, while it is loading. I want the whole page to appear black. Can I do something about this?
I did set the stage colour to black. If you can tell me without my having to get into the source and use coding, it would be much appreciated; I'm new at all this and the idea of coding scares the beegeebees out of me!
If it helps, the web address is; http://dennislewdesign.com.au/
Thanks in advance for any help you can give me

If you specify a bgcolor parameter in the Flash embedding code that might solve the problem. I don't see one currently defined. I am not sure that will solve it, but it cannot hurt to try. Normally, if you let Flash generate the html page code, it will include the background color parameter in the embedding code.

Similar Messages

Gallery Images: How to make clear PNG's open in full screen with a white background?

Hi,
So in the Life on Earth textbook, there is an image of an ant that has no background, so when you pick it up, you can see the text below without the standard "white box" around it.
I've scorwed the internet looking for answers but couldn't find any.
Please see the photos snapped from my phone of this:
Unfortunately... When I try to achive this, my images open on a black background.
I can achive the pick up.
Would really appreicate the help. Thanks...
Grant

Well, if I put a white background in my image, it opens in full screen with a white background. But has a white square when I pick it up:
This is with a 2028 x 1496 image same as above, just no background - came out of Illustrator - and this has the effect I want, as the first post but still opens to full screen with a black background.
Thanks for the help... Hope to get this one figured out!

I have been trying to watch tutorials on how layering works. All I want to do is this: I have one image of a radio with a white background. I need to have just the radio extracted, then on a new layer (white one/blank/plain) I need to copy and paste the i

I have been trying to watch tutorials on how layering works. All I want to do is this: I have one image of a radio with a white background. I need to have just the radio extracted, then on a new layer (white one/blank/plain) I need to copy and paste the image of the radio two times. How can I DO THIS!?!?!?! Thanks!

In Editor, go to the expert tab.
Open picture B, the one you wish to select the radio from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position object from picture B.
In the layers palette you should see picture A as the background layer, and the radio B on a separate layer.

My iphone 4 is stuck on the hello screen...with a white background after i tried to update it. How do i correct this? I have already gone to itunes and backed it up. But after i back it up it always return to the hello screen in different languages ?

My iphone 4 is stuck in the setup phase with a white background. It tells me hello in several diffrent languages and tells me to slide to set up. I have already backed it up on itunes several times but it always returns to the hello screen with the white back ground. Can anyone please help me with this? All of this happened after i updated it for the 1st time. Help pLease?
Edward

Hello Edward
Follow the prompts on your iPhone and you will get either at your home screen like normal or get to a point of restoring from back up. The article below will give step by step for restoring from back up.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Image with transparent background shows up with a white background in ID

Amateur needs help.
I have a copy of a logo with a transparent background. I made the (white) background transparent in PS by creating a layer from background and then selecting the white color in the background and deleting it. This has always worked in the past. But when I place this image into ID, it shows up with a white background. I have tried saving as a PSD, TIF, JPG, etc. I cannot get it to work.
I normally research these things until I find an answer, but I am on a tight deadline. Thanks!

I totally forgot to put that in my post. Yes, I am putting logos with transparent backgrounds in front of colored rectangles. That's how I noticed that this one logo is showing up with a white background. The weird thing is that the other two logos are fine. I did find a different version of this logo and this one works fine. The one that works fine is a JPG and the one that shows up with a white background is a JPG.

Hello everyone, So When I use the eraser on a photo and try to save it as jpeg is makes is save it as a copy but the parts that I erased are replaced with a white background and thats not what I want

Hello everyone, So When I use the eraser on a photo and try to save it as jpeg is makes is save it as a copy but the parts that I erased are replaced with a white background and thats not what I want

That may not be what you want, but Jpeg images are flattened, without transparency. Every pixel has a color value, with the default background usually being white. If you want to crate an image that leaves the erased area transparent, you will need to use an image format such as .gif or .pnc.

If I have a jpg with a white background around the actual image, is there any way to lose the white and just have the image?

If I have a jpg with a white background around the actual image, is there any way to lose the white and just have the image?

Menu > Format > Instant Alpha > slide the cursor over the color you want to eliminate till it looks good
Peter

I have 5 layers of texts with a white background on the bottom(V1). I want to cross dissolve to black at the same time on all layers. However they all don't disappear at the same time. It seems the top layer fades out last, and so on.

I have 5 layers of texts with a white background on the bottom(V1). I want to cross dissolve to black at the same time on all layers. However they all don't disappear at the same time. It seems the top layer fades out last, and so on. These are 20 frame dissolves.

FCP User Manual, page 798.
You can condense multiple clips that are stacked above each other into a nest. The nest appears as a single clip in the Timeline. If you need to modify the individual clips inside after you have created the nest, it can be expanded again by double clicking it.

Why does my illustration arrive with a white background?

After I've prepared a photo or illustration and place it into InDesign, it arrives with a white background. What must I do to change this?

TedWiden wrote:
... investigated the "options" box, but it doesn't offer "transparent background"
Really? It offers...
save as tiff (not flattened!) in PS - note Save Transparency box in bottom half of TIFF Options Dialog box. Now ID will 'recognize' your transparent background.

Unloading a flash movie using Safari browser

I have MAC 10.4 and safari 2.0 browser.I run a flash movie(Instruction.swf) and after that the actual test for the student run.So while running The first movie i.e Instruction.swf I am not able to unload that movie using javascript in Safari 2.0 browser so that the actual test can run.It just hang up after finishing the movie.While in the other Mac and windows it is working fine.
Please Help me.
Thanks In Advance.

Welcome to Apple Discussions!
Do you mean to say, in other Mac and Windows web browsers it is working fine? If that's the case, it sounds like the version of Flash plugin used by the Safari plugin is probably older than the one used by the other web browsers.
With Safari Enhancer's enabling of the Debug menu you can force certain webpages to open in other web browsers. That would help streamline your viewing of those pages.
http://www.lordofthecows.com/safari_enhancer.php
You can also enable the Debug menu with:
defaults write com.apple.Safari IncludeDebugMenu 1
from the Terminal.

Embedded Flash movie locks up Browser

It doesn't seem to matter which of the top three
browsers I use, but most often when you go to
a website page that automatically (or not?)
launches an embedded Flash movie, a little
window pops up inside that embedded movie
asking me to click Allow or Deny.
But NIETHER is clickable, the browser is locked,
nothing can be clicked and ALL other tabs are locked
and cannot be clicked either.
I have to hit CTRL+ALT+DELTE to kills the
browser in Task Manager. .A HUGE annoyance,
that comes unexpectedly because you don't know
when an embedded movie will be on the next page
you click.
How do I stop that Allow/Deny message popping up??
-Drew

CCWTechUtah wrote:
I'm running the latest ATI driver
The latest driver from Microsoft Update, or from the AMD download site? See http://forums.adobe.com/thread/945765
Green screen is usually an indication for some incompatibility with the graphics driver, although turning Hardware Acceleration off should prevent that from happening.

Why does the same pdf sometimes open in Photoshop with a white bkgd and sometimes transparent?

I am opening the same pdf file on two different computers with the same version of photoshop. Why does it open with a transparent background on one computer and a white background on the other? Is there any way to force it to open with a transparent background? Thanks.
Loni

You have different versions of the shared PDF libraries on the different systems and/or different settings on PDF handling, most likely. This can affect transparency. The PDF libraries are shared between Adobe apps, so this may be dependent on anotehr program having changed something in that area...
Mylenium

Problem Opening Mac Browser with Ostermiller lib

Has anyone had this problem when trying to open a browser window more than once from a java application on OSX with IE5.1:
NSRuntime.loadLibrary(/usr/lib/java/libObjCJava.dylib) error.
java.lang.UnsatisfiedLinkError: /usr/lib/java/libObjCJava.dylib
at com.apple.cocoa.foundation.NSRuntime.loadLibrary(NSRuntime.java:156)
at com.apple.cocoa.foundation.NSRuntime.<clinit>(NSRuntime.java:197)
at com.apple.cocoa.foundation.NSObject.<clinit>(NSObject.java:27)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:195)
at com.Ostermiller.util.Browser.displayURL(Browser.java:217)
The first time a browser window needs to be launched, it works, but any subsequent call kills the program and results in the above error message.

I heard that Apple finally implemented the MRJ method to open the browser in a recent version of OS X. I suppose it would be best to try to detect that a recent version of OS X is running and call the supported method.

Create a Sequence with a White Background

I have looked around on here and cannot find a direct answer.
I have a sequence in FCS and would like to make it a have a white background. I would like to avoid creating a white frame in V1 and expand that across the entire project. I would have to render every time I move something. Does anyone know how to change the black background so that the entire video is white?
I looked under View > Background > White but it won't keep the change.
Thanks

I think the initial assumption was that you had some video that you wanted to put over a white bkgd - which you would need to either use a chroma or luma key to cut out the parts where you wanted the white to show through.
Since you're talking about titles, it's simple. As was said, click the little button in the bottom corner of the Viewer (looks like a film frame with an A). Choose Matte | Color. Go to the Controls tab and change the color to white. Drag the matte to your Sequence.
Click the little button agin and choose Text then Text, or one of the other options if you want a scroll or crawl. Drag this to the Sequence above the matte layer. Double click your text layer and edit it in the Viewer.
You might also want to play wth Livetype, which has a few black on white text templates to choose from.
Barry

PDFs will not open in Browser with Adobe Reader 9

I am using Vista Ultimate x64 (SP1) using IE7. I am using the 32-bit version of the browser. I have selected "Display PDF in browser" on the Internet settings tab of the Adobe Reader 9.
Every time I select a PDF document, it forces me to save the document to the hard drive and open it from the hard drive. It will not open the PDF in the browser. How do I fix this problem??
The above procedure did work in Windows XP (32-bit), but does not appear to work in Vista (64-bit).

I have a similar problem using Adobe Reader 9 with Vista 64. I am also using the 32 bit version of IE7. Every time I click on a pdf to open in IE7 the screen remains white without starting Adobe Reader 9 in IE7 browser window.
Using Adobe Reader independantly works without any problem. Only the IE7 plugin does not seem to work. I reinstalled Adobe Reader 9 but without any effect. Adobe Reader 8 works. How comes?

Flash movie opens in browser with a white background

Similar Messages

Maybe you are looking for