Flash MX 2004 issues
We get this error message when attempting to save to a
network drive or locally.
"An error occurred while attempting to write to a file."
Any advice?
Hello mate, unfourtanately i dont have a solution to your
problem, what i do have is a problem of my own.
Am working on MX, and when i export my document as a movie
some of the buttons stop working and also
some items just dissapear.
I have tried reloading the actions but it still dont work.
Any ideas??
Similar Messages
-
Flash 8 vs. FLash MX 2004
This is a Flash 8 vs. Flash MX 2004 issue...
Anyone else noticing a difference saving files over a network
from Flash 8. I have never had a problem with Flash MX 2004 saving
over a network, but now saving a 14 MB flash file to a Mac OS X
Server is taking up to 2 minutes over AFP!! Server is a Sawtooth G4
running Jaguar Server 10.2.8 - long in the tooth I know!
An odd thing about this is that my first save will take 15
seconds, my second about 2 minutes, the third around 15 seconds,
the fourth around 2 minutes and so on... A "Save as" will take
about 40 seconds consistently.
That is:
0:15 - 1st save
2:00 - 2nd save
0:15 - 3rd save
1:56 - 4th save
Again that is using AFP, but even using SMB I notice this
alternate short/long save time. Using SMB a "Save as" takes 16
seconds on the same 14 MB file. Then the first save will take 3
seconds and the second about 13 seconds, the third save will take 3
seconds the fourth save will take 14 seconds etc...
Now this looks like a good case for using SMB over AFP (but
that is a topic for another forum). However, it is clearly a Flash
8 vs. Flash MX 2004 issue. When I go back to using Flash MX 2004
saves pretty consistently take about 2-3 seconds and "Save As"
takes about 10 seconds. This is using AFP or SMB (SMB is a bit
faster).
I called Macromedia (Adobe) support for help and their only
answer is that "saving over a network is not reccommended or
supported" (neither is this documented, even though some of their
tutorial examples use network workflows). I told them that Flash MX
2004 (and previous) NEVER gave me this problem which has apparently
been introduced with Flash 8 Professional.
Anyone else have this issue?
Thanks
Jflyyou should search this forum the past 2 days - been a few
more posts about working/saving to a
network and losing entire flas - it is never recommended -
with any type of program.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
ALabama1959 wrote:
> This is a Flash 8 vs. Flash MX 2004 issue...
>
> Anyone else noticing a difference saving files over a
network from Flash 8. I
> have never had a problem with Flash MX 2004 saving over
a network, but now
> saving a 14 MB flash file to a Mac OS X Server is taking
up to 2 minutes over
> AFP!! Server is a Sawtooth G4 running Jaguar Server
10.2.8 - long in the tooth
> I know!
>
> An odd thing about this is that my first save will take
15 seconds, my second
> about 2 minutes, the third around 15 seconds, the fourth
around 2 minutes and
> so on... A "Save as" will take about 40 seconds
consistently.
>
> That is:
> 0:15 - 1st save
> 2:00 - 2nd save
> 0:15 - 3rd save
> 1:56 - 4th save
>
> Again that is using AFP, but even using SMB I notice
this alternate short/long
> save time. Using SMB a "Save as" takes 16 seconds on the
same 14 MB file. Then
> the first save will take 3 seconds and the second about
13 seconds, the third
> save will take 3 seconds the fourth save will take 14
seconds etc...
>
> Now this looks like a good case for using SMB over AFP
(but that is a topic
> for another forum). However, it is clearly a Flash 8 vs.
Flash MX 2004 issue.
> When I go back to using Flash MX 2004 saves pretty
consistently take about 2-3
> seconds and "Save As" takes about 10 seconds. This is
using AFP or SMB (SMB is
> a bit faster).
>
> I called Macromedia (Adobe) support for help and their
only answer is that
> "saving over a network is not reccommended or supported"
(neither is this
> documented, even though some of their tutorial examples
use network workflows).
> I told them that Flash MX 2004 (and previous) NEVER gave
me this problem which
> has apparently been introduced with Flash 8
Professional.
>
> Anyone else have this issue?
>
> Thanks
>
> Jfly
>
> -
Problem using CSS in Flash MX 2004
While working through a tutorial using Flash MX 2004 and CSS
StyleSheets, publishing the page produces the error below each time
I attempt to publish the page and I am unable to continue. There
doesn't seem to be a problem with the code, and the TextField.as
file is in the location where this error indicates that it is not.
Can anyone help?
//********************************* Error Message
**Error** C:\Documents and Settings\Administrator\Local
Settings\Application Data\Macromedia\Flash MX
2004\en\Configuration\CLASSES\TextField.as: Line 47: The class
'TextField.StyleSheet' could not be loaded.
var styleSheet:TextField.StyleSheet;
**Error** Scene=Scene 1, layer=a, frame=1:Line 4: The class
'TextField.StyleSheet' could not be loaded.
var cssStyles:TextField.StyleSheet = new
TextField.StyleSheet ();
Total ActionScript Errors: 2 Reported Errors: 2
//********************************* /Error Message
//-------------------------- The code that produces the error
var cssStyles:TextField.StyleSheet = new TextField.StyleSheet
cssStyles.load("styles/styles.css");
cssStyles.onLoad = function (success) {
if (success) {
loadedInfo.styleSheet = cssStyles;
} else {
loadedInfo.text = "There has been an error loading the
requested information. Please contact the Webmaster and report your
error.";
//-------------------------- /The code that produces the
error ----------------------\\
TX!
David Marion
Email: [email protected]I found the problem!!
While exploring the Fireworks MX 2004 folder located under
"C:\Documents and Settings\USER\Application Data\Macromedia\"
folder I discovered that this folder was empty. So, I connected the
old hard drive and investigated the contents of the corresponding
folder on that drive. Discovering the wide assortment of files and
folders in that folder, I simply copied the contents of that folder
to the Fireworks MX 2004 folder and retried running the application
and IT WORKED!
Thanks for all your communications and in depth
troubleshooting steps, I will keep them in may Application
troubleshooting Tool Tips for future reference. I have included the
actions used here which brought about the successful resolution of
this issue so that if you'd like you might include them in any Help
Desk Methods you may have. It was truly a collaborative effort
because I would not have thought to explore the Application Data
folder to resolve this issue without you pointing me in that
direction.
Thanks again! -
Hi,
I have a flash header that I created for my site using flash
mx 2004. But I have recently upgrade to flash 8. If I try and open
up the header file in flash 8, the document is all disfigured and
then timelines etc are all messed up. Is there anyway I can get it
to look like it does when I plug it into flash mx 2004.
Regardsseabaz wrote:
> Hi,
> I have a flash header that I created for my site using
flash mx 2004. But I
> have recently upgrade to flash 8. If I try and open up
the header file in flash
> 8, the document is all disfigured and then timelines etc
are all messed up. Is
> there anyway I can get it to look like it does when I
plug it into flash mx
> 2004.
> Regards
That's rather weird, I open MX 04 files in 8 few times dayli,
never had a single problem
nor do I hear anyone else complain about similar issue.
Perhaps someone temper with that
file ?
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami> -
Trouble opening Flash MX 2004 files in CS3
Has anyone encountered any problems trying to open orignal
.fla files created in Flash MX 2004 in the CS3 version? I get an
error stating "unexpected file format".I tried opening your test file in my version of CS3 and it
shut it down completely - CS3 quit
unexpectedly. Rare for me as I have been using/testing CS3
for months and not seen this issue - i
suspect the file is corrupt in some way but then again it
would open in flash 8 - can you save as
from flash 8 with a new name and upload again?
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
penmyles wrote:
> Since last posting this, I have been talking to tech.
suport, but I still don't
> have a solution.
>
> The MX files can open in Flash 8. But if I save them
from Flash 8 and try to
> open them in Flash CS3, it still doesn't work.
>
> Also, I have been able to open some MX files that were
created as test files
> (however, they were very simple, animation without
actionscript).
>
> Here is a sample of one of the files that I cannot open
in Flash CS3:
>
http://www.pennymyles.com/testfile.fla
> I'm just wondering if it's the file or my
computer/version/installation of
> Flash
>
> Thanks.
> -
Flash MX 2004 Won't Run on Mac
Hey everyone,
I'm running the new aluminum unibody model of the MacBook Pro, 15" with up-to-date specs, so space/RAM isn't an issue. I recently found my Flash MX 2004 disk which says it is fine to run on both Windows and Mac. I install it, but when I try to run it, it immediately crashes. Any tips of what I can do from anyone? I have the serial number, but I have been unable to find a demo version to download from online into which I can input the serial number to activate it.
Thanks for your help!Hey everyone,
I'm running the new aluminum unibody model of the MacBook Pro, 15" with up-to-date specs, so space/RAM isn't an issue. I recently found my Flash MX 2004 disk which says it is fine to run on both Windows and Mac. I install it, but when I try to run it, it immediately crashes. Any tips of what I can do from anyone? I have the serial number, but I have been unable to find a demo version to download from online into which I can input the serial number to activate it.
Thanks for your help! -
Problem using a Flash MX 2004 Progress Bar Component within a Movieclip
I'm try to setup a progress bar to show the percentage loaded
of a mp3 audio file using the Flash MX 2004 Progress bar component.
I can get the progress bar to the work normally by the having the
component on the stage (not in a movie clip) with the component set
to:
mode: polled
source loader
with the following actionscript on the layer above:
pBar.setStyle("themeColor", 0xFF0000);
var loader:Object = new Sound();
loader.loadSound("http:/www.mywebsite.co.uk/mymp3.mp3",
true);
But I won't to put the preloader inside a Movie Clip (the
movie clip is called 'content_MC') as the website has alot of
content. When I do this the mp3 file still streams but the Progress
Bar doesn't work.
I think I just need to change the action script so that it
links with the component telling it to calculate the progress of
the audio streaming file.
Am I right? Where am I going wrong?I found the problem!!
While exploring the Fireworks MX 2004 folder located under
"C:\Documents and Settings\USER\Application Data\Macromedia\"
folder I discovered that this folder was empty. So, I connected the
old hard drive and investigated the contents of the corresponding
folder on that drive. Discovering the wide assortment of files and
folders in that folder, I simply copied the contents of that folder
to the Fireworks MX 2004 folder and retried running the application
and IT WORKED!
Thanks for all your communications and in depth
troubleshooting steps, I will keep them in may Application
troubleshooting Tool Tips for future reference. I have included the
actions used here which brought about the successful resolution of
this issue so that if you'd like you might include them in any Help
Desk Methods you may have. It was truly a collaborative effort
because I would not have thought to explore the Application Data
folder to resolve this issue without you pointing me in that
direction.
Thanks again! -
New iMac with 10.6.2 - but when tried to install Flash MX 2004 pgm crashes
HI,
First, perhaps there's a list somewhere of pgms that won't run under snow leopard?
We just got a new iMac 21.5" with 10.6.2
Trying to migrate pgms we had on our old G4 - like Flash MX 2004. After a clean install - it keeps crashing. Console log shows:
1/8/10 7:56:40 PM [0x0-0x28028].com.macromedia.flash.7[318] Authentication Service: Started
1/8/10 7:56:41 PM ReportCrash[325] Saved crash report for Flash[324] version ??? (???) to /Users/mahlenius/Library/Logs/DiagnosticReports/Flash_2010-01-08-195640Jude.crash
1/8/10 7:56:41 PM ReportCrash[325] Saved crash report for Flash[326] version ??? (???) to /Users/mahlenius/Library/Logs/DiagnosticReports/Flash_2010-01-08-195641Jude.crash
1/8/10 7:56:41 PM [0x0-0x28028].com.macromedia.flash.7[318] translate: MACHRCV_PORTCHANGED - invalid pointer, rcv buffer not swapped
It would seem that I probably will have to spend a lot more $ just to get pgms to run on this new system.
Any clues on getting this to run?
thanks
'markFlash MX 2004 is quite ancient. Latest shows it's viable for OS X 10.3. For compatibility info, start with http://www.macintouch.com/specialreports/snowleopard/slcompat.html
-
Sizing photo's in Photoshop to use in Macromedia Flash MX 2004
Am trying to create a gallery for webpage using Macromedia Flash MX 2004, have imported photo's into library and got the Flash gallery to publish. But am concerned as the flash .swf file is only 273kb with 20 images in it, the existing gallery file I am wanting to replace is approximaately 2.5mb.
I was advised to downsize each photo to 300x200 pixels which seems to fit the display in the flash file. Thought maybe I am doing something wrong in Photoshop when I am resizing each photo from original 3 or 4 mb photo down to the 300x200 pixel size. Any clues out there?I really know nothing about Macromedia Flash, but since no one has given any responses my thought is that if doing an action you need small pictures so they will load quickly.
If you resize save as new image so the quality images are not destroyed. If you have a lot of pictures to resize check out Bridge/tools/photoshop/image processor. -
Adobe Premiere Pro 2 and Macromedia Flash MX 2004
I'm using Adobe Premiere Pro 2.0 and have recently installed Macromedia Flash MX 2004.
Now when I go to export to Flash I don't get the Adobe Premiere's Flash Export dialog box when I press "Options" from the Export Settings. I get the Flash MX Professional 2004 "Flash Video (FLV) Exporter." It doesn't allow me to change any of the parameters.
I then un-installed Macromedia Flash MX 2004 but still get the same "Flash Video (FLV) Exporter."
Any ideas on how to get the Premiere exporter back?Well there is no answer to my question, but I did finally get the Adobe Media Encoder dialog box to come back again.
After uninstalling Premiere and QuickTime, then shutting down the computer, rebooting and logging on to the Admin account, shutting down again, rebooting again, logging in to the Admin account again ...
I then went in to the registry and removed all the Entries that had either of these in it:
C:\Program Files (x86)\Common Files\Adobe\DVA\COM
C:\Program Files (x86)\Common Files\Adobe\DVA\FLASH
and these as well
C:\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
C?\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
Rebooted the computer, logged back in to Admin.
I then re-installed QuickTime, and rebooted.
I then installed Premiere and the Adobe Media Encoder Flash dialog now shows up.
I'd be careful messy with the registry if you are trying to fix this type of problem. Try uninstalling quicktime and premiere and do the above shutdown, reboot sequence a number of times before doing anything to the registry.
I'm not sure what I'm going to do about that Flash Website I've working on... -
I installed Macromedia Flash MX 2004 yesterday,but I get an
error,unfortunately,it's one of those "Program has encountered a
problem and need to be cosed." errors
All I can get is the error signature
AppName: flash.exe AppVer: 7.0.0.470 ModName: unknown
ModVer: 0.0.0.0 Offset: 646e756f
And I get this tipe of error with Flash 8 as well
As an OS I use XP professional with SP 2
Any ideas are welcome
(ps,I am new here,and I'm clueless if I posted this thread in
the right section)This is not the answer you want, but if you can get yourself
a copy of Flash 8, you'll have almost exactly the same program with
a better interface...and it won't crash on you! (BTW, Flash 8 is
still the standard in most places.) I loved Flash 7, better known
as the 2004 MX versions, but it was buggy and cranky because it was
released too soon. Flash 8 was much better and far more
user-friendly. -
Did macromedia just get crappier with Flash MX 2004?
Did Flash just get cr*ppier? What the h*ll is going on?? Now
that we export our swf, we have to make sure that we f'in mask out
the working area? What genius came up with that bulls**t?? Also,
when we put actions on buttons we have to go thru a lot more sh*t
with typing up all the scripts?? not to mention they are a hell of
lot more bugs!!! c'mon Macromedia, some of us have time constraint
with real deadllnes, so why all the innefficiencies and added
frustrations?? You guys are suppose to make it better with each
version, not f*cking make it sh*ttier..get your head outta your
a$$es. FLASH MX 2004 IS A F'in RIP-OFF!!"just" get crappier is a bit of an outdated statement - MX
2004 is flash version 7 and the currect
version is Flash 8 - MX 2004 came out well over a year ago.
You don't and never have had to "mask" out the work area - I
have no idea what you are referring to
- can you explain in detail what is or is not happening?
Yes they removed normal mode from the AS panel but brought it
back in flash 8 as "Script Assist"
which is even better.
You refer to "Macromedia" which is no longer (again, dating
yourself
) Adobe bought MM so I think
you may have just emrged from the technology cave so to speak
--> Adobe Certified Expert *ACE*
--> www.mudbubble.com
--> www.keyframer.com
dke21 wrote:
> Did Flash just get cr*ppier? What the h*ll is going on??
Now that we export
> our swf, we have to make sure that we f'in mask out the
working area? What
> genius came up with that bulls**t?? Also, when we put
actions on buttons we
> have to go thru a lot more sh*t with typing up all the
scripts?? not to mention
> they are a hell of lot more bugs!!! c'mon Macromedia,
some of us have time
> constraint with real deadllnes, so why all the
innefficiencies and added
> frustrations?? You guys are suppose to make it better
with each version, not
> f*cking make it sh*ttier..get your head outta your
a$$es. FLASH MX 2004 IS A
> F'in RIP-OFF!!
> -
How to restore sound to exported avi? - Flash MX 2004 Pro
Hi,
Over the last couple of days I have been tinkering around with Flash MX 2004 Pro. More specifically, I have been importing avi's to the library and then placing the embedded video into a movieclip so I could have more control over it. While in the library I could preview the video along with the sound. Exporting the video again in avi format it would render the sound. However, all of a sudden it will only preview the video and not the sound in the library and the same goes for when I export a video there is no sound. The strange thing is the sound is still present when I test the movie. I have tried reinstalling the program with no luck. Any ideas?
Many thanks.Well there is no answer to my question, but I did finally get the Adobe Media Encoder dialog box to come back again.
After uninstalling Premiere and QuickTime, then shutting down the computer, rebooting and logging on to the Admin account, shutting down again, rebooting again, logging in to the Admin account again ...
I then went in to the registry and removed all the Entries that had either of these in it:
C:\Program Files (x86)\Common Files\Adobe\DVA\COM
C:\Program Files (x86)\Common Files\Adobe\DVA\FLASH
and these as well
C:\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
C?\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
Rebooted the computer, logged back in to Admin.
I then re-installed QuickTime, and rebooted.
I then installed Premiere and the Adobe Media Encoder Flash dialog now shows up.
I'd be careful messy with the registry if you are trying to fix this type of problem. Try uninstalling quicktime and premiere and do the above shutdown, reboot sequence a number of times before doing anything to the registry.
I'm not sure what I'm going to do about that Flash Website I've working on... -
This is the message I get when I export:
"To export a Captivate movie to Flash, you should have
Macromedia Flash 2004 installed."
I do have Macromedia Flash 2004 installed. In fact I removed
Flash 8 from my machine and restarted just so there would be no
misdirection.
Does anyone have any idea what can fix this?
Frankly, I am ready to give up on Captivate for good. I have
been twisting myself over backwards for two months to get Captivate
to work as a robust e-learning tool. It could be that I am just
asking too much of this program.
Still, it is supposed to export to Flash MX 2004 and it's
not. Any ideas?Hi naimahav
Frankly, I am ready to give up on Captivate for good
I'm not sure what category you fall into here, but it's not
uncommon to see people that are pretty familiar with Flash view
Captivate as some "nifty Flash add in". If this is your category,
it's not surprising you are frustrated. Even though Captivate can
produce .SWF output, it was never intended at any point to compete
with Flash. It has a totally different purpose.
I guess the larger question here is, what are you wanting to
accomplish that you feel Captivate cannot do for you and you feel
the need to resort to bringing it into Flash?
Oh, I suppose while I'm here I should give you a link to a
TechNote regarding the message.
Click here to read the
TechNote
Cheers... Rick -
Hello,
I need to encrypt a string in Flash MX 2004. Does it provied
such a function ( like php's md5() ) and if not what other way is
there to do thisexactly - the illusion is just that - scaling the objects
larger will provide the illusion you are
zooming - remember the opening sequence of the very 1st star
wars movie (1977)? Those space ships
just after the opening text were stationary - they simply
moved the camera alongside them - when
viewing the film the shaps (in our own minds) appear to move.
Same concept with flash - scale
object(s) on stage - most animators nest entire scenes in
Graphic movie clips and then scale them to
produce camera zooms.
Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
C-Rock wrote:
> they are actually zooming in by making the symbol
larger. they probably just have done it in a skilled way to make
you think that is what they did.
Maybe you are looking for
-
Cannot load the report on PDF format after running report
Hi, I try to use Web.show_document to run the report thru form. After that, the PDF file cannot be shown on browser (IE5.0) but the PDF file is generated successful and if use Acrobat to open it, it work. An error as 'An error occurred trying to load
-
Hi all We are doing a port load and want to auto map and add values to a qualified lookup table during the import we have to following setting in out ini Automap Unmapped Value=Yes Unmapped Value Handling=Add Always Use Unmapped Value Handling=Add Th
-
Re-publishing problems to facebook
So I'm having troubles with my facebook publishing application out of lightroom 3. I can publish and album without problems but as soon as i edit or change any of the photos already published i run into problems. The edited photos end up re-publishin
-
Report in DM module (ISU)for Meter removed that have debts &security charge
I am beginner in SAP ISU, looking forward for solution , I have a techno-functional task- "I need to develope a report in DM module(ISU) for Meter removed that have debts and security charge with generalised Requirement. Moderator message: please
-
Suggestions on Workflow w/ External HD
I'm trying to find the best way to plan my workflow while I'm on the road. While I'm away from home, I will be uploading and editing photos to my laptop in LR and then when I'm home, I would like to store the files on my external harddrive, so that I