Flash mx 2004 wont export or do anything really
my teacher gave me flash mx 2004. the problem is, the start
page wont open, i cant export movies, i cant open help topics. my
teacher didnt give me the disk, he used a flash drive. would that
make a difference. any help is appreciated.
You cannot get Applecare plus now.
It is unlikely that they will replace as it is damaged. The only way to find out is to make an appointment at the genius and and see what they say.
Similar Messages
-
I can not update to FLASH MX 2004 professional
I can not update to FLASH MX 2004 professional
Nobody can tell you anything without proper system info or other technical details. You're talking about a legacy product, anyway, so I'm not sure what you are trying to do.
Mylenium -
How to restore sound to exported avi? - Flash MX 2004 Pro
Hi,
Over the last couple of days I have been tinkering around with Flash MX 2004 Pro. More specifically, I have been importing avi's to the library and then placing the embedded video into a movieclip so I could have more control over it. While in the library I could preview the video along with the sound. Exporting the video again in avi format it would render the sound. However, all of a sudden it will only preview the video and not the sound in the library and the same goes for when I export a video there is no sound. The strange thing is the sound is still present when I test the movie. I have tried reinstalling the program with no luck. Any ideas?
Many thanks.Well there is no answer to my question, but I did finally get the Adobe Media Encoder dialog box to come back again.
After uninstalling Premiere and QuickTime, then shutting down the computer, rebooting and logging on to the Admin account, shutting down again, rebooting again, logging in to the Admin account again ...
I then went in to the registry and removed all the Entries that had either of these in it:
C:\Program Files (x86)\Common Files\Adobe\DVA\COM
C:\Program Files (x86)\Common Files\Adobe\DVA\FLASH
and these as well
C:\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
C?\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
Rebooted the computer, logged back in to Admin.
I then re-installed QuickTime, and rebooted.
I then installed Premiere and the Adobe Media Encoder Flash dialog now shows up.
I'd be careful messy with the registry if you are trying to fix this type of problem. Try uninstalling quicktime and premiere and do the above shutdown, reboot sequence a number of times before doing anything to the registry.
I'm not sure what I'm going to do about that Flash Website I've working on... -
This is the message I get when I export:
"To export a Captivate movie to Flash, you should have
Macromedia Flash 2004 installed."
I do have Macromedia Flash 2004 installed. In fact I removed
Flash 8 from my machine and restarted just so there would be no
misdirection.
Does anyone have any idea what can fix this?
Frankly, I am ready to give up on Captivate for good. I have
been twisting myself over backwards for two months to get Captivate
to work as a robust e-learning tool. It could be that I am just
asking too much of this program.
Still, it is supposed to export to Flash MX 2004 and it's
not. Any ideas?Hi naimahav
Frankly, I am ready to give up on Captivate for good
I'm not sure what category you fall into here, but it's not
uncommon to see people that are pretty familiar with Flash view
Captivate as some "nifty Flash add in". If this is your category,
it's not surprising you are frustrated. Even though Captivate can
produce .SWF output, it was never intended at any point to compete
with Flash. It has a totally different purpose.
I guess the larger question here is, what are you wanting to
accomplish that you feel Captivate cannot do for you and you feel
the need to resort to bringing it into Flash?
Oh, I suppose while I'm here I should give you a link to a
TechNote regarding the message.
Click here to read the
TechNote
Cheers... Rick -
Error in export to Flash MX 2004
Hi,
While exporting to Flash MX 2004 it shows an dialogue box "
To export a Captivate movie to flash, you should have Macromedia
Flash MX 2004 installed."
Even though I've Flash MX 2004 already installed on my
machine, this error shows. How can I get an FLA output from
Captivate ?
FYI: I am making a screen capture movie like elearning
course.Hi Guys!
Greg said ...
quote:
I wonder if Captivate 2.0 will import a Captivate 1.0 and then
export to Flash with the tweens intact? Any idea yet?]
Hey
Rick, you only made one mistake (but for you even that is
rare). Greg said
"with the tweens intact" ... and you read
"... when tweens interact.".
I'm sure you'll agree that with the clarification, it's not
confusing except the extent to which Greg expects or desires that
movement of objects - including "transitions"? - in the original
Captivate project be preserved after bringing it into Flash 8. As
far as CP1 - to - CP2 - to Flash 8 is concerned, CP1 projects seem
to me to be converted very well. And moving the (now CP2) project
conversion into Flash 8, there is little that won't come along
nicely.
Yes, Greg, including the tweens, which are preserved for the
objects I looked at specifically ... but the right person to answer
that question might be Mark (Fletcher) instead of myself. I
imported CP movies to Flash 8 only to see if it was being done
without the previous loss of non-supported elements (etc.) but I
have no intention of actually working with my Captivate projects
inside the Flash environment - during beta, now, or ever. I just
feel that the power of Captivate is sufficient for my purposes, and
importing it to Flash 8 would accomplish little except to put the
horse in hen-house. (That makes perfect sense to me, and is greatly
humorous as well; but if you don't "get it", I don't think I can
explain it.
. -
Adobe Premiere Pro 2 and Macromedia Flash MX 2004
I'm using Adobe Premiere Pro 2.0 and have recently installed Macromedia Flash MX 2004.
Now when I go to export to Flash I don't get the Adobe Premiere's Flash Export dialog box when I press "Options" from the Export Settings. I get the Flash MX Professional 2004 "Flash Video (FLV) Exporter." It doesn't allow me to change any of the parameters.
I then un-installed Macromedia Flash MX 2004 but still get the same "Flash Video (FLV) Exporter."
Any ideas on how to get the Premiere exporter back?Well there is no answer to my question, but I did finally get the Adobe Media Encoder dialog box to come back again.
After uninstalling Premiere and QuickTime, then shutting down the computer, rebooting and logging on to the Admin account, shutting down again, rebooting again, logging in to the Admin account again ...
I then went in to the registry and removed all the Entries that had either of these in it:
C:\Program Files (x86)\Common Files\Adobe\DVA\COM
C:\Program Files (x86)\Common Files\Adobe\DVA\FLASH
and these as well
C:\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
C?\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
Rebooted the computer, logged back in to Admin.
I then re-installed QuickTime, and rebooted.
I then installed Premiere and the Adobe Media Encoder Flash dialog now shows up.
I'd be careful messy with the registry if you are trying to fix this type of problem. Try uninstalling quicktime and premiere and do the above shutdown, reboot sequence a number of times before doing anything to the registry.
I'm not sure what I'm going to do about that Flash Website I've working on... -
Adobe Media Encoder and Macromedia Flash MX 2004
I already posted this question here: http://forums.adobe.com/thread/777473?tstart=0
When I first posted I thought it had something to do with Premiere but now think it has something to do with the Adobe Media Encoder.
If you want to delete that message then feel free.
I'm using Adobe Premiere Pro 2.0 and have recently installed Macromedia Flash MX 2004.
Now when I go to export to Flash I don't get the Adobe Premiere's Flash Export dialog box when I press "Options" from the Export Settings. I get the Flash MX Professional 2004 "Flash Video (FLV) Exporter." It doesn't allow me to change any of the parameters.
I then un-installed Macromedia Flash MX 2004 but still get the same "Flash Video (FLV) Exporter."
Any ideas on how to get the Premiere exporter back?
I uninstalled all macromedia programs, Dreamweaver, Extention Manger, and FreeHand.
I now I get this message when selecting Macromedia Flash Video from the export settings:
"Cannot find Flash Video export Module for QuickTime. Please install and retry."
So I un-installed and re-installed QuickTime and got the same message:
"Cannot find Flash Video export Module for QuickTime. Please install and retry."
No quite sure if the above message was talking about reinstalling QuickTime or Premiere, so I uninstalled and reinstalled Premiere again, agian and got this message:
"Cannot find Flash Video export Module for QuickTime. Please install and retry."Well there is no answer to my question, but I did finally get the Adobe Media Encoder dialog box to come back again.
After uninstalling Premiere and QuickTime, then shutting down the computer, rebooting and logging on to the Admin account, shutting down again, rebooting again, logging in to the Admin account again ...
I then went in to the registry and removed all the Entries that had either of these in it:
C:\Program Files (x86)\Common Files\Adobe\DVA\COM
C:\Program Files (x86)\Common Files\Adobe\DVA\FLASH
and these as well
C:\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
C?\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
Rebooted the computer, logged back in to Admin.
I then re-installed QuickTime, and rebooted.
I then installed Premiere and the Adobe Media Encoder Flash dialog now shows up.
I'd be careful messy with the registry if you are trying to fix this type of problem. Try uninstalling quicktime and premiere and do the above shutdown, reboot sequence a number of times before doing anything to the registry.
I'm not sure what I'm going to do about that Flash Website I've working on... -
Did macromedia just get crappier with Flash MX 2004?
Did Flash just get cr*ppier? What the h*ll is going on?? Now
that we export our swf, we have to make sure that we f'in mask out
the working area? What genius came up with that bulls**t?? Also,
when we put actions on buttons we have to go thru a lot more sh*t
with typing up all the scripts?? not to mention they are a hell of
lot more bugs!!! c'mon Macromedia, some of us have time constraint
with real deadllnes, so why all the innefficiencies and added
frustrations?? You guys are suppose to make it better with each
version, not f*cking make it sh*ttier..get your head outta your
a$$es. FLASH MX 2004 IS A F'in RIP-OFF!!"just" get crappier is a bit of an outdated statement - MX
2004 is flash version 7 and the currect
version is Flash 8 - MX 2004 came out well over a year ago.
You don't and never have had to "mask" out the work area - I
have no idea what you are referring to
- can you explain in detail what is or is not happening?
Yes they removed normal mode from the AS panel but brought it
back in flash 8 as "Script Assist"
which is even better.
You refer to "Macromedia" which is no longer (again, dating
yourself
) Adobe bought MM so I think
you may have just emrged from the technology cave so to speak
--> Adobe Certified Expert *ACE*
--> www.mudbubble.com
--> www.keyframer.com
dke21 wrote:
> Did Flash just get cr*ppier? What the h*ll is going on??
Now that we export
> our swf, we have to make sure that we f'in mask out the
working area? What
> genius came up with that bulls**t?? Also, when we put
actions on buttons we
> have to go thru a lot more sh*t with typing up all the
scripts?? not to mention
> they are a hell of lot more bugs!!! c'mon Macromedia,
some of us have time
> constraint with real deadllnes, so why all the
innefficiencies and added
> frustrations?? You guys are suppose to make it better
with each version, not
> f*cking make it sh*ttier..get your head outta your
a$$es. FLASH MX 2004 IS A
> F'in RIP-OFF!!
> -
How do you troubleshoot Flash animations that wont load?
I've recently switched to Safari 3.1 from Firefox and am finding occasional pages with flash animations that wont play
(currently trying to get to "Product tour" on this page: http://www.logitech.com/index.cfm/remotes/universal_remotes/devices/3898&cl=us,e n )
I just get a blank frame. I've confirmed I have the latest Adobe Flash plugin installed (9,0,115,0)
Just curious if there is anything to do, or if this is just a funky, Safari-unfriendly page.
Thanks.Same result here.
if this is just a funky, Safari-unfriendly page
Probably! But two things:
It seems to be their Javascript that doesn't work.
Secondly (may be worth trying):
Some Leopard users have mentioned that the latest Flash Player (v.9.0.115.0) conflicts with Leopard, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1 -
Flash MX 2004 Pro & QuickTime Pro 7
Iam using Flash MX 2004 Pro and there is a feature that when
I want to publish a movie it says I can export a movie in
quicktime. I tried it and I get the following error. "Flash MX - An
error occured because a required QuickTime component could not be
found." I have QuickTime Pro 7 and do not understand this error.
What am I missing.
Thank you,
AdonaiEchadTechnote here:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_18889
Dan Mode
--> Adobe Community Expert
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
*THE online Radio*
http://www.tornadostream.com
<--check this
*Must Read*
http://www.smithmediafusion.com/blog
"AdonaiEchad" <[email protected]> wrote in
message
news:ernj92$ga1$[email protected]..
> Iam using Flash MX 2004 Pro and there is a feature that
when I want to
> publish
> a movie it says I can export a movie in quicktime. I
tried it and I get
> the
> following error. "Flash MX - An error occured because a
required QuickTime
> component could not be found." I have QuickTime Pro 7
and do not
> understand
> this error. What am I missing.
>
> Thank you,
> AdonaiEchad
> -
My phone wont let me download anything even free stuff or update.it keep saying something wrong with my billing info so i fix it but still cant download.I signed out sign back in still nothing please help i'm getting angry
If it says your billing info is wrong that means that your credit card issuer is refusing to approve your account. You will have to solve the problem with your bank or credit card company.
-
I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch. All other components work normally. In Activity monitor it says Adobe switchboard failed to respond. Can anyone help solve this issue?
Release: 4/25/2012
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx -
i created a new apple id and as my billing info i put in my itunes card number. i still have $18 dollars left in the account but it wont let me buy anything else because it constantly asks for my billing info and i now put none as my payment method. how can i buy stuff again?
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Step 3 is important, no matter whether you do this on a Mac or an iPad / iPhone:
Important: Before proceeding to the next step, you must download and install a free application. ...
Important: Before proceeding to the next step, you must download and install the free application by tapping Free followed by tapping Install App. ... -
I had gotten a gift card with around $20 on it so I decided to buy some songs. I had bought a few, then I bought the last song, and now iTunes wont allow me to update my apps, or let me download any other apps because apparently I have $0 on my card; The weird part about that is it let me keep the song, but wont let me get anything else regardless of the charge. I don't have a credit card myself, so I'm really trying to avoid buying another gift card for one 99 cent song. Does anyone know how to get rid of a song from the billing receipt? I've tried everything!
ThanksPurchases are considered final, but you can try the 'report a problem' link to contact iTunes Support and see if they will cancel the purchase : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/ contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
i have a problem, my ipod wont let me update anything. because my little brother bought something when my credit card had no money on it, how do i make this go away
You need to add a valid payment method to your account. Purchasing and redeeming an iTunes gift card will work
Maybe you are looking for
-
Is there any user exit to add new filed in KB31N to capture client specif information at item level.
-
Mac mini thunderbolt port stop working
Good night. First, I apologize for my English. I have a mac mini (2011 model). Two days ago there was a power outage and the mac shut down. After turning it on, it failed to recognize my TV connected through the Thunderbolt port (with a adapter THUND
-
XML data Upload in BW ( Webservice issue)
I am following the SDN document of 'How to load XML data into BW' and followed the steps till 19 and 26( BW3.5 need to skip steps in between). As mentioned I have followed the steps to create the web service properly. However while testing I am get
-
At the very bottom of most pages, I get these thin, annoying banners all the time. They relate to so many different things it is difficult to list them all. From Facebook page info to adverts. They do have a very small x at the end (be careful which
-
Quick key launch for next frame in sequenced loop?
Hi, I want go quickly through my sequence loop. Is there a key combo for next frame? Thanks Solved! Go to Solution.