Flash MX FLA not opening in Flash 8
I'm trying to open a .fla file in Flash8 which was created in
FlashMX but for some reason the components aren't opening
correctly. Anyone have any ideas?
what do you mean by "...the components aren't opening
correct"?
Similar Messages
-
Hi,
I have had the adobe creative suite suite 3 Deisgn premium for over an year now. Recently over the past 2 months I am no longer able to open up any of the following programs:
Photoshop
Dreamweaver
Illustrator
Flash
They have worked for me in the past but now they are just not opening up for me. I have tried plenty of things such as:
Uninstalling the whole cd then reinstalling
Calling customer service
Browsing/googling for ways to fix it
Yet I still have been yet to get this issue resolved. I have tried installing the CS4 30 day trial and that works fine. But I want my CS3 version to work. I tried everything. The thing is I do not get an error message either on the these so there is no way of titling this issue. If it helps I have windows vista. Well please let me know what you come up with . My email is [email protected] Thank you!
Brett RyanWhat does happen? When I double click on them nothing happens for a second it gives me the loading signal but nothing comes up.
You say no error message - how far in the boot process does the program get? Does it just not respond at all? Does the program load-box appear and freeze? Does the program load-box appear and dissapear? Does the computer freeze up in the middle of the load?
You never end up seeing anything for any of the applications except for photoshop which loads but then closes right away. So it just doesnt respond at all. But there is no freezing. So the load-box only appears and dissapears when I open photoshop. but for everything else it just never appears.
Does the process display in your processes list?
No it does not display
Did you install/uninstall/delete anything around the time this started?
I'm pretty sure I didnt uninstall or install anything around the time it started. I think I would remember if it did. So i'm pretty sure I did not.
Did you try going back to a restore point before this started? No I did not.
Have you run a thorough virus scan? Yes I have and nothing comes up. -
I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!
Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.
-
ITunes will not open/user agreement flashes
Hi ... my name is Jen. My husband bought me the iPod Video 30GB for Christmas. Last night at 9pm I put the cd that came with the iPod into my computer to install iPod/iTunes/QuickTime. After I installed it, iTunes would not open. So, I found this website ... found a similar topic ... I uninstalled iTunes, etc ... I downloaded and ran 4 programs that were suggested in the other topic ... Ad-Aware, Spybot, ewido and AVG Free ... I ran all 4 of them (which took 5 hours total) ... they all found lots of crap to get rid of ... which I did. Anyway, I installed iPod/iTunes again this morning ... and the same thing is happening ... I double click iTunes ... the user agreement flashed very briefly and then ... nothing! I am so frustrated!
I have also tried to right click iTunes and clicked Run As ... and selected "The following user" ... but everytime I try that ... this message comes up:
Unable to log on:
Logon failure:
unknown user name or bad password ...
Any help would be so, so (insert 100 more so's) appreciated.
Thank you, JenApple customer service *****. I've called them 2 times, because I have the same problem as everyone else here. I waited 25 minutes before I even got to talk to someone, and they couldn't even fix my problem. I told the guy I had re-installed iTunes like 50 times, but he made me do it again anyway. The best part is after he totally proved he was an idiot, he convinced me he was going to send me an e-mail that would walk me through how to fix it. This happened twice and neither of the technicians sent me an e-mail. I even told one guy twice what my e-mail is. For everyone out there that has the same problem as I do, I feel your frustration. Apple has got to respond to this issue because no one seems to know how to fix it. If anyone has any information please e-mail me at [email protected], or post it here. Also, if you were curious I have Service Pack 2 for windows and all of my firewalls are up-to-date.
-
Flash recovery area issue. I can not open the database??
Hi all
I am using oracle 11.2.0 .1.0 on windows
when i tried to start the database I got the following error.
ORA-03113: end-of-file on communication channel
I clear out all information in Trace file. I cleared out all operating system level audit trails. then i deleted archivelog files using operating system level delete. still my database is not opening???
I tried to start this using RMAN but got the same error. now i have deleted the files from flash recovery area how can i let oracle system to know that those are deleted and there is enough space. Rman does not execute crosschek commands at mount state of the database?
Need solution.
Regards
MAlikmalikdba wrote:
the last option which ask to delete the files. i already have deleted the files at operating system level. now the issue is how to let the system that the space is free in flash recovery area? rman is not running crosscheck command at mount stage of the target database. What steps should i follow now?
Thanks
malik
Are you saying you are getting an error while trying to crosscheck at mount? Or you simply don't believe it will work?
oracle:orcl$ rman target /
Recovery Manager: Release 11.2.0.2.0 - Production on Thu Jul 11 10:52:48 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database (not started)
RMAN> startup mount;
Oracle instance started
database mounted
Total System Global Area 839282688 bytes
Fixed Size 2231128 bytes
Variable Size 503317672 bytes
Database Buffers 331350016 bytes
Redo Buffers 2383872 bytes
RMAN> crosscheck archivelog all;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=18 device type=DISK
specification does not match any archived log in the repository
RMAN>
A perfectly normal crosscheck at the mount stage -
CS 6 MAC will not open after Installing Flash Player
After installing a the latest version of the Flash Player (MAC/Yosemite/Safari) Photoshop CS6, that had been working very well for a couple of years, now it will not open, or is not responding.
I reinstalled CS6 and still it doesn't work. The poblem may be related to the new version of Flash Player.
It there something I can do?
Please, help.
ThanksYes. Uninstall Intego Virus Barrier. You don't need it.
You will find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435 -
Reader v11 will not open in Windows Explorer (or browser) when clicking a PDF file; just a flash on the screen. I can open Reader from Programs then open the file. I'm using a laptop upgraded to Windows 7
I do no understand "flash on the screen"; could it be http://support.microsoft.com/kb/2716529 ?
-
Tried to download adobe flash several times on our new Mac and it will not open in any internet sites that we have tried.
test to see if it's installed, Flash Player Help
-
my downloaded apps are not opening, they flash and then shut down. This hapened after i upgraded to the 5.0. How do i fix it!? I've tried everything
You need to resync you applications or redownload them for free via app store. They may be read by your phone, but they are really not there. Re downloading will fix this.
-
anyone, pls help - my ipad is not opening, only apple logo is flashing on and off... pls help
Have you tried rebooting your iPad?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that does not work, you can try restoring your iPad iOS Software.
iTunes: Restoring iOS software - Support - Apple
Make sure that you read the article all the way through and pay attention to the last part that talks about using recovery mode. -
CS5.5 Flash Builder will not open after unistallation and reinstallation
10.8 up to date...
I have been fighting with CS5.5 on 10.8 since august 8th! Adobe helped somewhat, by helping me assure permissions were correctly set on their files. However, when i go back into the get info window , once in a while instead of seeing one of the admin users (myself and my husband) listed, I see a "fetching" in the user name colum. it just keeps searching and never stops. I have to delete the fecting and manually add our admin accounts to the permissions list. Also, in my user home folder the applications file is empty, but I can access all the apps from the HD or doc/apps alias. Is this a new thing for 10.8?
So I am down to this..., only Flash Buidler 4.5 will not open. I think it has somethings to do with the extensions. The software is up to date. Flash reinstalled, unistalled FB 4.5 and reinstalled from disk. Deleted and re-downloaded/ installed eclipse app. Niether of the original app disks have the extensions forder on it. I went to the Adobe sight and dowloaded their version of the extras (Flex builder extension, i think .)
Adobe help articles say to make sure the ...
Following installation it is recommended that you edit the eclipse.ini file for your Eclipseinstance, so that it includes the following settings:
-vmargs -Xms256m -Xmx512m -XX:MaxPermSize=256m -XX:PermSize=64m "
I have no idea how to do this. I found the file once, though I did not know how to open and edit it.
Below, is a weird list of error messages from disk repair log:
2012-08-18 23:21:11 -0500: Verifying volume “Macintosh HD”
2012-08-18 23:21:11 -0500: Starting verification tool:
2012-08-18 23:21:12 -0500: Checking file system2012-08-18 23:21:12 -0500: Performing live verification.
2012-08-18 23:21:12 -0500: Checking Journaled HFS Plus volume.
2012-08-18 23:23:40 -0500: Checking extents overflow file.
2012-08-18 23:23:40 -0500: Checking catalog file.
2012-08-18 23:23:40 -0500: Checking multi-linked files.
2012-08-18 23:23:40 -0500: Checking catalog hierarchy.
2012-08-18 23:23:40 -0500: Checking extended attributes file.
2012-08-18 23:23:40 -0500: Checking volume bitmap.
2012-08-18 23:23:40 -0500: Checking volume information.
2012-08-18 23:23:41 -0500: The volume Macintosh HD appears to be OK.
2012-08-18 23:23:41 -0500: Repair tool completed:
2012-08-18 23:23:41 -0500:
2012-08-18 23:23:41 -0500:
2012-08-18 23:24:03 -0500: Repairing permissions for “Macintosh HD”
2012-08-18 23:26:43 -0500: Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
2012-08-18 23:27:48 -0500: ACL differs on “Users/Shared”
2012-08-18 23:27:48 -0500: Repaired “Users/Shared”
2012-08-18 23:27:49 -0500: ACL found but not expected on “private/var/root”
2012-08-18 23:27:49 -0500: Repaired “private/var/root”
2012-08-18 23:27:49 -0500: ACL found but not expected on “private/var/root/Library”
2012-08-18 23:27:49 -0500: Repaired “private/var/root/Library”
2012-08-18 23:27:49 -0500: ACL found but not expected on “private/var/root/Library/Preferences”
2012-08-18 23:27:49 -0500: Repaired “private/var/root/Library/Preferences”
2012-08-18 23:28:09 -0500: Group differs on “private/var/root/Library/Preferences/.GlobalPreferences.plist”; should be 0; group is 20.
2012-08-18 23:28:09 -0500: Repaired “private/var/root/Library/Preferences/.GlobalPreferences.plist”
2012-08-18 23:28:16 -0500:
2012-08-18 23:28:16 -0500: Permissions repair complete
2012-08-18 23:28:16 -0500:
ANY advice is most appreciated. I cannot bear the thought of calling Adobe again!VA Girl wrote:
Also, in my user home folder the applications file is empty, but I can access all the apps from the HD or doc/apps alias. Is this a new thing for 10.8?
OS X has two Applications: one in your user folder and the other at the top of the volume. Applications are installed in /Applications, and you should use the user folder for applications that you are going to open in your account only, and not in another one.
Open Java Preferences and install it -
I'm a CC member and I've downloaded and installed Adobe Flash Professional CC, but it will not open. How should I proceed?
You can try:
creative cloud desktop failed to install
Downloading and installing desktop apps from Creative Cloud
Problems with Creative Cloud (apps not starting)
Hope it helps you.
Regards
Rajshree -
Flash player file will not open
Flash player 14.0 will download a 1.0 MB file but the file will not open, using windows 8.1 with firefox
Try using the offline installer http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe
-
I downloaded Adobe Flash Player 10.3 but still my game is not opening
yestarday i played www.smeet.com but today it says that u need to download Adobe Flash Player 10.3 and i download and install again but still game is not opening .what should i do ??
Ah, fixed itself.... I just shutdown and restarted FF. Wha La works like a champ.
-
Flash in HTML-based AIR app: Urls do not open
Hy there
Like the title states, I have a HTML-based AIR application, which embeds flash. This flash opens Links which should eventually open the default browser. For this I previously had to set the following property in my AIR application:
window.htmlLoader.navigateInSystemBrowser = true;
Like this the URL calls were forwarded to outside the application and then opened the webbrowser. We had successfully tested this on various systems.
However, now there are users of our application, who report that on their system (Including WinXP Professional SP3!) the websites do not open at all. When clicking on a link inside the app nothing happens.
Their system:
Hardware: Lenovo IdeaPad S12
Windows XP Home Edition v2002 Service pack 3
IE 7 (Version 7.0.5730.13)
Firefox 3.5.7
I had a look at the system and things like switching the default browser or re-installing Firefox did not work. Unfortunately this is a critical issue and kinda urgent so any help would be greatly appreciated. Thanks very much.Thank you for reporting back and letting us know.
Chris
Maybe you are looking for
-
I have this mobo + graphic card, Athlon XP1700, and i have some sort of compatibility problem. When i install Windows 98se, DirectX 9 and any catalyst newer than 3.2 i've got ddhelp error communicate (always when i close simply tetris 4000 game). I c
-
IMessage arrive at 3 Phones same time
I´ve 3 iPhones (3GS, 4 and 4S) on the same apple ID. Now I get iMessage on all 3 Phones? Do somebody know this Problem? thx
-
New features added, old features removed
I've seen many users who has asked why the new firmware removed some good features and so on... So I have this thread, and hope that answer you all. the phone ROM is basically fix, say 128MB ROM and the available ROM for user is 44MB (say in the spec
-
Lr 5 with Mac OS 10.6.8
Doesn't Lightroom 5 run on a Mac with OS 10.6.8.? What kind of problems do I have to solve, if I try?
-
Use exp/imp to migrate a database
hi, I want to migrate a database from window to hp unix, Can I use the following way? thanks! First,exp from windows: 1.exp the schema without data 2.exp the whole database with data Second,imp to unix: 1.use dbca to create a database; 2.imp the sche