Flash Not Detected After Enterprise Deployment

I recently deployed Flash 13 from ConfigMgr 2012. My package consisted of the Flash uninstaller and the Flash msi. I run the uninstaller first to make sure that the systems were clean followed by the Flash msi installer. When my users go to sites that contain Flash it is not detected. Checked add/remove programs shows that Flash 13.xxx ActiveX is installed. Users are using IE9 and Windows 7 x86. If I go to the adobe site and install Flash from there it works. For testing I deployed Flash 14 to a couple users who were having the issue. The same thing happens with 14. So again, I go and install Flash from the internet. Checking Add/Remove programs afterwards shows two identical entries for Flash Active x 14. The only difference is the size of the installations. Further testing today seems to indicate that if a new user logs into a machine where Flash is broken Flash works for that user. Has anyone else seen anything like this?

I had the same issue after installing Mountain Lion from the App store. The issue is you are missing the IOUSBFamily.kext extension amongst others. The solution is to backup your macbook, then perform a clean install of Mountain Lion.
I had this done at the Apple Store and now everything is restored as well as performance speed being improved.
Note: When restoring your files (a clean install will delete all your files and applications), use the Migration Assistant.
I would recommend going to the Apple Store to do this because they can perform the clean install from a USB which is so much faster than the download form the App store.
Hope this helps.

Similar Messages

Sim card was not detect after upgrade my iphone4s to ios 6.0.1

my sim card was not detected after i update to ios 6.0.1
i had ald try many time plug in n out my sim card it keep on show searching no service or no sim
i had reset my network setting n i reset all n now i cant activate my iphone

Connect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/e0f22e92de98ebae10e 3fd537c16619e.jpg

GT70 0ND GPU not detected after BSOD

hi my GT70 0ND gpu is not detected after a bsod, the gpu fan goes to max speed from start up
is there anything I can do to know whether the graphic card is dead?

Quote from: Dreis on 24-February-14, 01:00:35
Reinstalled windows but it still didnt work. Well probably just gonna rma it. Thanks guys
Yeah, that pretty much covers all the troubleshooting that can be done without taking things apart. =/
>>How to contact MSI.<<

Tx2510us - Fingerprint Reader Not Detected after Service Pack 1 for Windows 7 installed

Have had Windows 7 32-Bit installed and running fine since early last year.. Today Windows Update installed Service Pack 1.
Now, the fingerprint reader (AuthenTec AES1610) is not detected. Digital Persona reported the fingerprint reader isn't connected and the Device Manager shows installed and working properly.. When the computer boots, the logon screen shows not detected..
Have seen several older posts that reference a page with a fix for AuthenTec/Digital Persona, but get a 403 error when trying to access..
Hoping someone still has this info, or possibly there's a new fix to work with Service Pack 1..
Thanks
~~~~ Nothings forgotten. Nothing is ever forgotten. ~~~~

Followed the given advice: installed SP1 again, ran Firefox in safemode, disabled other running programs as mutorrent, still Firefox didnt work. I had internetconnection (after restarting mutorrent this did work, the app telling me what the weather outside is worked) but no Firefox: as previous time I got the start screen, but could not browse the internet.
I also tried to start the Internet Explorer and it also looked as if that application had problems (but that can also be because I did not use it for a while - old version or whatever - and it is not my standard browser).
Have again performed a roll back in order to remove SP1, now Firefox works again.
If somebody has advice it would be very welcome!

Why do I get window adobe flash' NOT INSTALLED AFTER I HAVE JUST UNINSTALLED AND THEN REINSTALLED IT

why do I get a "correct version of adobe flash not installed"message after I have uninstalled and reinstalled the program several times. It worked on this computer for the last six months?

What is your operating system, version & edition?
What is your web browser?
What is your Flash Player version?
What are you doing when you get that message?
[topic moved to Flash Player forum]

Plz help, "device not detected" after windows updates?? I have so

I have An Audigy 2 ZS, and have the latest drivers. It has been working PERFECT, LAST NIGHT I had like 0 WINDOWS UPDATES, i dont' know if any of these had anything to do with this. But, I just now went to the icon in the task bar, and went to change SPEAKER SETTINGS to switch to HEADPHONES as I ALWAYS DO, I was surprised when the "unable to change the sound device to your selected device", you press ok, and it comes up TWO MORE TIMES, Right after each other.
I DO HAVE SOUND, FOR NOW. I have read other mentioning this error, but I didn't seem to find any answers. I can't go to speaker settings, or Surround Mixer,
OK, NOW I tried to go to GRAPHICS EQ, and an error came up that said "THE AUDIO DEVICE SUPPORTED BY THIS APPLICATION IS NOT DETECTED, THE APPLICATION WILL EXIT"
What is going on?
I went to device manager and it says that the device is working properly, and I DO have sound.
I DON'T get it. And I'm not likeing this. This is starting to worry me.
Does ANYONE know what is going on.. PLZ?

Thanx for the reply. I just now fixed it. I'm not totally sure what I did. Earlier I had uninstalled the device from Device manager, and then restarted, and it installed the drivers from the CD. It didn't fix it. So, I ran the LIVE update here at creative.com and downloaded the version I had before, I guess because when i had ran the update before I uninstalled the device the update wasn't there.
But, it started to update, and said something it had to restart the pc in order to install the update, and after it installed the new "creative audio console" it now works.
the whole thing was strange since I dind't lose sound at all. Just couldn't access settings.

Flash not detecting any of my microphones

Hello - I need flash to work with my usb or internal mic. But I cannot seem to get to the flash 'microphone settings' panel - so I presume that flash for whatever reason is not detecting any of my cards.
Any advice as to how to get flash to recognize that I have a microphone, so that I can use it with flash applications?
Thanks!

JCAlexandres wrote:
I can tell a lot of folks are having the same issue.
So why not read the threads that were apparently found by searching and try the same troubleshoot steps provided?
Device not detected in iTunes for Windows

Equium A300D-16C - Battery not detected after replacement

I have a Equium A300D-16C. The original battery was shot so I purchased a Genuine PA3727-1brs 12 cell battery. I have put it in the laptop it appears to charge it but in the corner it still says no battery detected even though its on charge. When I take out the charger it will say unknown remaining.
I have tried the usual tricks of going into device manager and uninstalling the apci compliant control and still it has not sorted it self out. I have also updated my bios to the most recent one. I just wanted to know what else could I do so I can see how much battery is left and if the laptop can recognise i.,

Hello
Is it an original Toshiba battery from an authorized service provider?
Usually the new battery should be detected after first start I would recommend charging the battery while notebook is turned off. Then start notebook with battery only and check if its recognized properly.

Zen Extra Not Detected after upgr

Hi All,
I have a 30GB Zen Extra with firmware .03.02 and an XP ServPak 2 laptop with all current critical updates. This morning I upgraded from MediaSource Organizer 2.0.07 to Creative MediaSource Player/Organizer 5.0.38.
When I run MediaSource Player/Organizer 5.0.38 it does not detect my Zen Extra (it says "player not connected"). When I run the old version of MediaSource Organizer (version 2.0.07) it detects the player just fine.
I tried to look thru the Knowledge Base but all of my search terms did not provide any useful answers.
Any way to get MediaSource Player/Organizer 5.0.38 to connect to my Zen Extra?
And why is the old version of MediaSource Organizer still on my system? Shouldn't the upgrade delete it's
Thanks!
Advait

must be a common issue. Same thing happens to me with my Zen Sleek.
What I'm going to try is deleting ALL Creative stuff and starting over. It is probably a software bug. I don't expect it to work, but I will give it a shot.

Flash not loading after install...

Snow Leopard was working perfectly until the most recent update. When I initially upgraded, I updated flash, as we know snow leopard shipped with the previous version of flash. However, after Apple released an update to address flash and other security updates, flash only loads occasionally. I notice more when trying to view youtube videos. The videos don't fully load and I have to constantly try and refresh the page until it eventually loads. Anybody else experiencing this issues or have come up with a solution??
Thanks.

Hi,
*"as we know snow leopard shipped with the previous version of flash"*
You didn't need to update your flash plugin afer installing SL.
Go here and follow the instructions to UNinstall Flash Player
http://kb2.adobe.com/cps/141/tn_14157.html
Then reinstall Flash player.
Carolyn

DVD Drive not detected after Vista reinstall/recover

Hi,
I was having various problems with my computer (dv6815nr) so I did a complete recovery using the recovery image
on the hard drive. Everything seems to work now except the dvd drive is not working. it is not detected in device manager.
I have tried all the fixes and "mr. fix its" that i could find on the ms knowledge forum. i have also checked the registry for the upper/lower filters as described on the ms website and also in this forum. i have also removed, rebooted, shutoff and then reinstalled the drive with no results. any help would be greatly appreciated.
gocd1

yes, the drive was working immediately before the recovery. I noticed that the drive was not working when i went to install the windows ultimate upgrade disc. drive lights up, spins disc and then nothing. Also, i have physically removed the drive from the computer, shut off computer removed power supply (cord and battery) held down power button for 30 seconds restart computer with drive not in computer and then shutoff again and physically reinstall drive. Also have done uninstall of all IDE/ATA controllers channels in device manager and then restart as recommended on another post. looked on another hp6700 and found "cd/dvd" on device manager list and mine does not have that. so not sure why dvd drive would be in ide/ata channel list.
gocd1

Zen Micro - not detected after installing new flashc

I replaced the flashcard in my Zen Micro. Everything went well until I tried to connect the player to my computer and download the firmware. I get a message that the player is not detected.
I have read a lot of posts on this and other forums and tried many solutions--connecting the player to another computer, deleting the player from the hardware list in Device Manager and reconnecting it, connecting it to different USB ports, and using different software (Windows Media Player, Creative MediaSource, RealPlayer, etc.). So far, nothing has worked.
My computer is running Vista. I have another one that is running Windows XP. If anyone has suggestions for working around this on either system, I'd be grateful! Otherwise, I'm afraid my beloved Zen Micro is a goner... :-(
Thank you!

The problem will be the same I would think because the issue is that the player is an older one, so WMP does not recognise it. Unless they change it in te full version, which is probably only a slim chance, you will still need to download the hotfix and the other update.
But if i were you i wait for the full version anyway, the Beta 2 is better but still far from perfect...

USB Flash Drive not detected after OS X Mountain Lion installed.

My MacBook Air 11 inch (Mid 2011) suddenly stopped detecting all my USB flash drives a week after upgraded to Mountain Lion.
I have a tiny 16GB USB flash drive (Sandisk Cruzer Fit), for daily work, that has never been unplugged from my MBA.
Everything was fine on Lion, and a week of Mountain Lion, until just when my MBA prompted me that my flash drive "was not ejected properly" after I re-opened the display/lid, or from sleep mode.
I thought I might have accidentally removed the flash drive unknowingly. So I tried re-plugging the flash drive, closed and re-opened the MBA lid, and the same error message "The disk was not ejected properly" occured. I repeated the steps for a few times (thinking my flash drive might be faulty) and at my last attempt, the flash drive was stopped detected. I tried several USB flash drives and external hard drives (of various brands) to both the USB ports of my MBA, only the external hard drives were detected (on both USB ports) and functioning. None of the flash drives was detected on either USB port.
The tested flash drives were plugged to another 13" MacBook (Unibody, Late 2008, OS X Lion) and they all worked fine.
I wonder if anyone faces the same problem, and solution(s) please?
Additional: OS X Mountain Lion re-installed and same problem occurs / No problem with OS X Lion.

I had the same issue after installing Mountain Lion from the App store. The issue is you are missing the IOUSBFamily.kext extension amongst others. The solution is to backup your macbook, then perform a clean install of Mountain Lion.
I had this done at the Apple Store and now everything is restored as well as performance speed being improved.
Note: When restoring your files (a clean install will delete all your files and applications), use the Migration Assistant.
I would recommend going to the Apple Store to do this because they can perform the clean install from a USB which is so much faster than the download form the App store.
Hope this helps.

Hard Drive Not detected after replacing DC In Board

So after more than a year of jiggling an easliy bent AC adapter in the port to get my ibook G4 to charge it just quit and would not charge. I suspected it was the slightly loose DC in port (having no idea what was behind the little hole) so I took it to the Genius Bar at my local Apple Store where they confirmed it was likely the DC in board. I was told that just sending my little old ibook away to get fixed would cause an exorbitant $330 just to ship it out, never mind any parts, etc. It was suggested I just buy a new macbook and be done with it. But we've been through a lot and I didn't want to just toss her away so I found a DC In board and replaced it myself. Parts and directions courtesy of ifixit.com
So the part is working well enough that it detects the new AC Adapter (this one new and unbent), which is great. Now I have a slightly larger problem and that is the dreaded little finder/? flashing icon that comes up when I start the computer. It won't start in safe mode. I can't find the original disks (Panther OSX) that came with it. I popped in my Tiger Install Disk and that (Thankfully) came up so I was able to open Disk Utility and lo and behold no hard drive was detected. Just the optical drive and the Tiger DVD.
I was so careful! Did I poke the Hard Drive or something? Is she mad at me for opening her? If anyone has any advice on how I can repair this myself please let me know. I'm desparate to have my baby back.
Message was edited by: alemicia

It's possible that something was disrupted during the repair. You might go back to the ifixit site and look at the instructions for replacing the hard drive. You want to try and see if somehow you disconnected it or something like that. There's a good chance that it is something simple that you can fix. Looking at the pictures might trigger a memory of maybe something taken loose and not reconnected. And try to find your original discs--you will need them.
Good luck!

Adobe Flash Not Useable After Install

I have Windows 7 Home Premium and IE 11. Have been using Jackie Lawson greeting card app for years. Recently, when I try to access a greeting card within this app, it tells me that I need to install Adobe Flash. After I reinstall Adobe Flash, the same thing happens. I have tried installing Adobe Flash many times including with IE not running and with another app that uses Adobe Flash terminated during the install. I have also uninstalled Adobe Flash prior to beginning the process, but nothing seems to work. Here is the last entry from FlashInstall.log:
2014-12-6+22-17-0.231 [error] 1223 1056
2014-12-9+0-17-0.234 [error] 1223 1056
2014-12-10+1-17-0.230 [error] 1223 1056
2014-12-10+1-17-21.8 [error] 1226 1062
=O====== M/15.0.0.246 2014-12-10+01-17-06.691 ========
0000 [I] 00000010 FlashPlayerInstaller.exe -install -iv 11
0001 [I] 00000020 C:\Windows\system32\FlashPlayerCPLApp.cpl
0002 [I] 00000013
0003 [I] 00000025 C:\Windows\system32\Macromed\Flash\FlashUtil32_15_0_0_246_ActiveX.exe
0004 [I] 00000015 C:\Windows\system32\Macromed\Flash\FlashUtil32_15_0_0_246_ActiveX.exe
0005 [I] 00000016 C:\Windows\system32\Macromed\Flash\FlashUtil32_15_0_0_246_ActiveX.dll
0006 [I] 00000023 C:\Windows\system32\Macromed\Flash\activex.vch
0007 [I] 00000019 C:\Windows\system32\FlashPlayerCPLApp.cpl
0008 [W] 00001024 C:\Windows\system32\FlashPlayerCPLApp.cpl 183
0009 [W] 00001024 C:\Windows\system32\FlashPlayerApp.exe 183
0010 [I] 00000021 C:\Windows\system32\Macromed\Flash\FlashPlayerUpdateService.exe
0011 [W] 00001106
0012 [W] 00001106
0013 [W] 00001024 C:\Windows\system32\Macromed\Flash\FlashPlayerUpdateService.exe 183
0014 [I] 00000012
=X====== M/15.0.0.246 2014-12-10+01-17-23.203
Alex Phillips

Lynne Phillips Dec 17, 2014 7:28 PM (in response to i dont know what to put h)
I am the original poster. Does any one have any idea what I should do next? BTW - this is an Adobe Flash problem: Adobe Flash says its installation has completed, but when the Adobe checker tests for it, it says Adobe Flash is not installed on my PC???

Flash Not Detected After Enterprise Deployment

Similar Messages

Maybe you are looking for