Flash not loading/installing

I can download Adobe ok , seemingly installs ok but when I go to test it on Adobe page , the flash image does not show. There is no indication of anything wrong or missing. The flash image simply does not show. There is also no indication or message telling me whether or not I should have particular settings in internet explorer. ( I have IE 8 which otherwise works fine and have windows XP with all updates/service packs ). ( I did upload a similar comment to a previous thread but this seems to have been removed). Thanks

Hi, Thank you. The version that you have listed is not the latest and that is probably the problem. What you are going
to have to do is use the Adobe Uninstaller and download it to your Desktop.
http://kb2.adobe.com/cps/141/tn_14157.html Read and follow the instructions as outlined in each section.
Download and SAVE this Installer to your Desktop.
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
After you have these on your Desktop, find out how to Disable all Anti-virus/spyware programs that run in realtime and
if you use any Firewall other than Windows Firewall, you want to know how to disable it also. If you have any extra Toolbars installed, I would disable them also. Then follow these instructions.
1. Close all browsers
2. Disconnect from the Internet and make sure no programs that use Flash are running
3. Disable the Anti-virus/spyware per above
4. Disable all Firewalls other than Windows
5. Run the Uninstaller and pay particular attention to the NOTES in the article
6. Reboot according to the NOTE
7. Run the Installer and Reboot Once
8. Enable your Firewalls and Anti-Virus programs
9. Reconnect back to the Internet
10. Go to this Adobe test site: http://www.adobe.com/products/flash/about
Post back if you have any questions.
After you complete this, you will need to look in your Add/Remove and list all Java entries there.
eidnolb

Similar Messages

Flash not loading after install...

Snow Leopard was working perfectly until the most recent update. When I initially upgraded, I updated flash, as we know snow leopard shipped with the previous version of flash. However, after Apple released an update to address flash and other security updates, flash only loads occasionally. I notice more when trying to view youtube videos. The videos don't fully load and I have to constantly try and refresh the page until it eventually loads. Anybody else experiencing this issues or have come up with a solution??
Thanks.

Hi,
*"as we know snow leopard shipped with the previous version of flash"*
You didn't need to update your flash plugin afer installing SL.
Go here and follow the instructions to UNinstall Flash Player
http://kb2.adobe.com/cps/141/tn_14157.html
Then reinstall Flash player.
Carolyn

Flash not finished install on Win7 IE9(?) get allow for website, Flash enabled-not fully installed, cant see clowds

Had problems with Flash not working. Windows 7, IE 9(?)latest. Uninstalled Flash, reinstalled Flash. Problems look like Flash never reinstalled ok. Can't see the "Clowds" shows version 15 installed. Had Flash Professional installed, reinstalled tha too, no luck. I get "webpage wants to use Flash msg constantly at bottom of IE9. "Allow/Allow for all sites" Add on for Flash is in IE9, and Enabled. Please help!! reinstall IE? Thanks!

Here is the install log that is in the system32\Macromed
folder. This shows where the error is occuring and that the file
that will not install is Flash10b.ocx
File: wrote 3866528 to
"C:\WINDOWS\system32\Macromed\Flash\Flash10b.ocx"
IfFileExists: file
"C:\WINDOWS\system32\Macromed\Flash\Flash10b.ocx" exists, jumping
352
File: overwriteflag=4, allowskipfilesflag=2,
name="FlashUtil10b.exe"
File: wrote 240544 to
"C:\WINDOWS\system32\Macromed\Flash\FlashUtil10b.exe"
End Main Section
Section: ""
Start Post Section
Register Player
Error registering DLL: Could not load
C:\WINDOWS\system32\Macromed\Flash\Flash10b.ocx
Call: 997
CallFixDACLs
CreateDirectory: "C:\DOCUME~1\tr3Ks\LOCALS~1\Temp" (1)
File: overwriteflag=4, allowskipfilesflag=2,
name="FlashUtil10b.exe"
File: wrote 240544 to
"C:\DOCUME~1\tr3Ks\LOCALS~1\Temp\FlashUtil10b.exe"
Call: 1227
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\DOCUME~1\tr3Ks\LOCALS~1\Temp\nsy10.tmp\nsExec.dll"
File: wrote 6144 to
"C:\DOCUME~1\tr3Ks\LOCALS~1\Temp\nsy10.tmp\nsExec.dll"
Delete: "C:\DOCUME~1\tr3Ks\LOCALS~1\Temp\FlashUtil10b.exe"
Delete:
DeleteFile("C:\DOCUME~1\tr3Ks\LOCALS~1\Temp\FlashUtil10b.exe")
CreateDirectory: "C:\WINDOWS\system32\Macromed\Flash" (1)
End CallFixDACLs
Jump: 356
Register Player
Error registering DLL: Could not load
C:\WINDOWS\system32\Macromed\Flash\Flash10b.ocx
MessageBox: 12582960,"Failed to install.
For troubleshooting tips, please see
http://www.adobe.com/go/tn_19166"

Flash not loading images in FireFox

I have a website that loads a small flash object that gets
it's images from an txt file. It all works fine in IE but not in
FireFox. I have the newest version of FireFox and Flash player 9
plugin. It loads the flash object and background but will not load
the images. It is supposed to fade several images in and out.
The website is
schakolad.com
If you view it in IE you can see how it is supposed to look.
Then view it in FireFox and you will see that it does not load the
fading images. I have done several tests including having the txt
file and the images in the same directory as the swf and the ASP
page. I have checked file and directory security. Still does not
work. I have saved the txt file in several formats including UTF-8,
Still does not work.
Any suggestions would be appreciated. Thanks!

In looking at your code, it looks like your problem is coming
from a malformed embed tag. You need to add the FlashVars parameter
to your embed if you want it to work in any browser other than IE.
IE doesn't need the embed tag to display flash content, and every
other browser REQUIRES it. Every <param> tag you use must
have a pair in the <embed>.
Here is your object with this added:
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0"
width="280" height="288">
<param name="movie" value="products.swf">
<param name="quality" value="high">
<PARAM NAME=FlashVars
VALUE="dfname=Images/Flash/data.txt">
<embed src="products.swf" quality="high" pluginspage="
http://www.macromedia.com/go/getflashplayer"
type="application/x-shockwave-flash" width="280" height="288"
flashvars="dfname=Images/Flash/data.txt"></embed></object>

Shockwave Flash not loading

Ever since I downloaded Adobe ExportPDF, Chrome does not work correctly. It keeps telling me that it :could not load Shockwave Flash". Why??? And, how do I fix this??

This is confusing, because ExportPDF isn't something that even can be downloaded.

Unable to Open adobe reader Portfolios due to flash not being installed

Flash : 12.0
Adobe Reader: 11.05
OS: Windows 8.1
Browser: IE 11
Hi,
when launching a PDF that is classed as a portfolio I get the below error which appears to require flash to be installed.
two things im sort of observing:
due to being on windows 8.1 Flash is now installed via Microsoft. I cannot find a valid update for windows 8.1 from adobe site can find for windows 8 but nothing for windows 8.1
Since Flash player Plugin is no longer bundled with Adobe Reader I need to install seperatly but i cant because of point 1.
If i install the windows 8 version of flash onto the machine I can open the PDF file no problem but by doiing this im not sure what file i might be over wrtiing and cause further issues down the track .
Read somewhere that the NPSWF64_12_0_0_70.dll is what adobe reader would use . copy the file to the required location and registering the dll seemed to do nothing as i get the same error.
My question is how can i get the Flash Plugin for Adobe reader to work so that I can open PDF portfolios ?

Windows 8.x only comes with the Flash Player ActiveX (for Internet Explorer); you need to install the plugin manually from http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe

Flash not loading using https

When I try loading the application using https it loads fine
in firefox but the .swf doesn't load up if I'm using IE.
I've found some documentation on this
http://kb.adobe.com/selfservice/viewContent.do?externalId=fdc7b5c&sliceId=2
I'm unable to change these settings so is there any other
ways around this?
Thanks
Josh

syllywabbit wrote:
> The flash script has been running without issue for a
long time. Now it doesn't
> load in IE. It still loads in Firefox.
>
> View this URL: www.brannlaw.com (Issue: Homepage,
left-green sidebar, under
> 'some of our clients' graphic, the flash movie not
loading.
>
Object tag does not use DATA tag, that's only for EMBED tag
for none IE browser.
You need to actually specify param name="movie" follow by
value="moviename.swf"
Suggest you use flash PUBLISH option to generate proper html
file with full object
embed tag, than copy paste the complete set into you existing
document.
Best Regards
Urami
Beauty is in the eye of the beer holder...
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Flash not loading info

Flash piece will load on various computers and fill in
information from database. However, one user gets the flash piece
loaded, but no information. What could be causing the information
not to load?

syllywabbit wrote:
> The flash script has been running without issue for a
long time. Now it doesn't
> load in IE. It still loads in Firefox.
>
> View this URL: www.brannlaw.com (Issue: Homepage,
left-green sidebar, under
> 'some of our clients' graphic, the flash movie not
loading.
>
Object tag does not use DATA tag, that's only for EMBED tag
for none IE browser.
You need to actually specify param name="movie" follow by
value="moviename.swf"
Suggest you use flash PUBLISH option to generate proper html
file with full object
embed tag, than copy paste the complete set into you existing
document.
Best Regards
Urami
Beauty is in the eye of the beer holder...
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Flash not loading in IE

The flash script has been running without issue for a long
time. Now it doesn't load in IE. It still loads in Firefox.
View this URL: www.brannlaw.com (Issue: Homepage, left-green
sidebar, under 'some of our clients' graphic, the flash movie not
loading.
Any help is appreciated.
Thanks

syllywabbit wrote:
> The flash script has been running without issue for a
long time. Now it doesn't
> load in IE. It still loads in Firefox.
>
> View this URL: www.brannlaw.com (Issue: Homepage,
left-green sidebar, under
> 'some of our clients' graphic, the flash movie not
loading.
>
Object tag does not use DATA tag, that's only for EMBED tag
for none IE browser.
You need to actually specify param name="movie" follow by
value="moviename.swf"
Suggest you use flash PUBLISH option to generate proper html
file with full object
embed tag, than copy paste the complete set into you existing
document.
Best Regards
Urami
Beauty is in the eye of the beer holder...
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

10.6.3 and flash not loading some content (Evony fails to load)

I the past 2 weeks i have had a number of problems when loading some flash based objects. Most facebook flash game, etc. work but objects like Evony and longer flash videos fail as well.
This happens in Safari, Firefox, Camino and Chrome
I have trashed the prefs of all browsers and flash and I have uninstalled flash with no luck.
Any ideas? Thanks.

Well the setting did nothing at all for the problem.
After all that, Adobe uninstall does crap all if you have Flash Install (not Flash player) as there are copies in the Flash folder.
I trashed the Player folder that was in the Flash folder, restarted, found the 10,0,45,2 installer (not the default download on the site), restart off the snow leopard disk, permissions repair (twice) and away i go with no problems.

YouTube Upload Flash Not Loading with SL

Anyone else having that problem? Installed Snow Leopard last night. I actually tried to upload a screen recording, but it hung on "5 seconds left" for about an hour. I went to YouTube to upload the vid myself and the upload flash tool never loads - just "Loading..."
Loads in Firefox.
The bulk plugin does not work either.

Got this solution from: http://www.google.com/support/forum/p/youtube/thread?tid=72dee0c7985b411d&hl=en
Removing Gears plugin ('/Library/Internet Plug-Ins/Gears.plugin/) makes the single file upload work again.
However when opening the mulltifile upload page it specifically requests Gears to be installed, I guess that's how it ended up on my MacBook in the first place.
Somebody at Google fix Gears...!

Flash not loading in index.html

Hi there, I have just registered a new domain and am using a temporary one until it had been propogated. The index/html is made up of a flash file and for some reason when I go to load it I get the "Get Adobe Flash Player" icon. I am not sure why. Can anyone help please? Below is the temporary domain I'm using, thanks:
http://72.51.46.77/~amycarri/
And here's the source info:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<style type="text/css">
body {
     background-color: #000;
#apDiv1 {
     position:absolute;
     left:248px;
     top:520px;
     width:813px;
     height:71px;
     z-index:1;
#apDiv2 {
     position:absolute;
     left:206px;
     top:8px;
     width:852px;
     height:31px;
     z-index:2;
#apDiv3 {
     position:absolute;
     left:709px;
     top:254px;
     width:407px;
     height:178px;
     z-index:3;
</style>
</head>
<body>
<div id="apDiv1"><img src="images/fader outer.jpg" width="801" height="49" /></div>
<div id="apDiv2"><img src="fader outer.jpg" width="842" height="36" /></div>
<div id="apDiv3"><img src="images/transparent image.png" width="334" height="140" border="0" usemap="#Map" />
<map name="Map" id="Map">
    <area shape="rect" coords="64,54,258,106" href="Gallery-Page.html" />
</map>
</div>
<center><object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="720" height="540">
<param name="movie" value="Scripts/Front Page (2).swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="6.0.65.0" />

<param name="expressinstall" value="Scripts/expressInstall.swf" />


<object type="application/x-shockwave-flash" data="Scripts/Front Page (2).swf" width="720" height="540">
    
    <param name="quality" value="high" />
    <param name="wmode" value="opaque" />
    <param name="swfversion" value="6.0.65.0" />
    <param name="expressinstall" value="Scripts/expressInstall.swf" />
    
    <div>
      <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
      <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
    </div>
    
</object>

</object></center>
<script type="text/javascript">
swfobject.registerObject("FlashID");
</script>
</body>
</html>

But when I go to the source code on mine I get this:
<param name="expressinstall" value="Scripts/expressInstall.swf" />


<object type="application/x-shockwave-flash" data="Scripts/FrontPage2.swf" width="720" height="540">
    
    <param name="quality" value="high" />
    <param name="wmode" value="opaque" />
    <param name="swfversion" value="6.0.65.0" />
    <param name="expressinstall" value="Scripts/expressInstall.swf" />
There is no Frontpage2.html anywhere in the code when I look at it :/

Cfform format="flash" not loading

The Problem: When I load a file that contains ANY cfform tag
with format="flash", all I get is a partially rendered object with
a spinning clock for a pointer.
Your initial reaction is probably "oh, thats just bad
code"... but, read on.. the plot thickens...
I have 2 domains... Domain.A is hosted out of the root of my
folder (i.e. /hosting)... a second domain, Domain.B is hosted out
of a subfolder of the root (i.e. /hosting/DomainB)...
I have a stripped down page with a cfform format="flash"
located at /hosting/DomainB called test.cfm.
If I open a browser and go to www.domainB.com/test.cfm - the
file will NOT compile or load all the way
If I open another browser and go to
www.domainA.com/domainb/test.cfom - the file loads correctly.
Exact same file, referenced by 2 different domain paths, with
2 different results.
I have copied this file to various other folders in my main
domain, and it works fine. I have also copied this file to other
servers and it runs fine. I have created new files and placed them
in DomainB's folder and they ALL exhibt the same problems - they
will only compile so far and then I get a spinning clock for all
eternity.
I'm at a total loss on this one and would appreciate ANY
thoughts...
Thanks all!

Wolvie....I sure hope you found an answer to your problem and
if you'd post it, i'd be most appreciated.
I have the exact same issue on cfform with flash rendering...
incident and incident has been post with goddaddy and finally
got someone to toss me a tidbit of info.
since i host domains in subfolders as you do i experience the
same works/doesnt work scenario.
I am told the key to this solution is in the Application.cfm
file. (not confirmed)
Now...exactly WHAT is to be declared, i dunno.
however, the acid test is to provide a full path to your
failing cfm. if it works doing that. then its some sort of pointer
to the IDE folder in issue (i am told) (again not figured out...im
just sharing at this time)
when i provided the full path ie:
www.mySite.com/subfoldername/myForm.cfm the failing page rendered
correctly. (and finally without that GD spinning clock ^^)
so i feel i'm on the right road here.

Adobe flash not working (installed)

I'm currently on OS X 10.8.2. I don't know how this happened but yesterday all videos on youtube started showing as "Blocked plug-in". So naturally I clicked the link to download the newest version of the adobe flash player, but even after it says "finished" when I go back to youtube the same thing happens again. I have then uninstalled and reinstalled for quite a few times, checked my Safari Prefrences (enabled plug-ins), and there are no extra plug in files. I have no idea why this is happening, so any help will be nice. Oh, and when I go to Flash Player Help it says my flash player is either not installed or enabled. But even if I follow all the steps stated it stills stay the exact same thing. Thanks in advance.

I'm currently on OS X 10.8.2.
Use Software Update or the OS 10.8.5 combo update to update your OS. Also, update everything SU has to offer for your computer. When done, repair permissions and restart your computer.

Pepper flash not loading in chrome

I have exhausted my google-fu on this issue, which I also had in other Linux distros. The issue is that pepper flash doesn't show up in the list of plugins in chrome://plugins at all, no errors when chrome is started from a terminal, and no indication that anyone else seems affected by the problem based on poring over the search results for a stupid amount of time.
My system is old. It's a Compaq based on an Asus A7VBX-LA motherboard. I have an Nvidia Riva TNT2 graphics card. System memory is 512MB.
I really hate flash in any form. I installed gnash a while back just so my daughter could watch youtube videos, but now she wants to be able to use sites like Hulu and no combination of gnash or adobe flash with any browser seems to work, so I thought I'd try chrome with pepper-flash. This same thing happened in Debian Jesse with this hardware. My best guess right now is that the software is laughing at my hardware, but I wish it would do it to my face an at least print a message to the terminal that my hardware isn't capable of using the plugin.

I don't think it's your hardware. I'm having the same problem with an Asus EEE 1005 (netbook). I have the updated version of Chromium (30.1) and the chromium-pepper-stable installed (and I confirmed that the so file is there). But Chromium doesn't see the plugin. It sees the Adobe Flash plugin, which I've disabled (but use with Firefox-Nightly, so I don't want to uninstall it).
The Wiki says simply disable one and enable the other. It offers the possibility of installing Iron (a Chrome clone) and running it from the command line in order to invoke Pepper Flash, but it seems not to imagine that the plugin won't be visible in Chromium.
I'd keep working on this if I had any ideas, but I don't. I'll just hope that updated versions of the plugin and Chromium work at some point.

Flash not loading/installing

Similar Messages

Maybe you are looking for