Flash not playing nicely with IE favorites bar

I administer a website (
http://womenscenter.uconn.edu/new_site/
) which on its main page has a Flash movie looping. It also has a
left menu bar for navigation, and everything is blissful until one
turns on the favorites bar in Internet Explorer. Then if the screen
is not big enough, the navigation bar is actually cut off in favor
of the Flash movie. What this means is that if there isn't enough
space with the favorites bar for both the navigation bar and the
movie, the navigation bar loses out rather than the other way
around (which is what one expects and wants to happen). I know it's
the Flash movie causing this because it doesn't happen on any of
the other pages in the site, which are basically identical in
layout except they don't have the Flash. Any help in preserving the
navigation bar would be greatly appreciated!

You can try to disable the hardware acceleration in the Flash Player.
See [[Cannot view full screen Flash videos]]
* http://www.youtube.com/swf_test.html (right-click the player: Settings)
Flash "Display settings" window:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.2 r153
* http://www.mozilla.com/plugincheck/
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://kb.mozillazine.org/Flash
*http://www.adobe.com/software/flash/about/

Similar Messages

  • M-Audio 61ES not playing nicely with Logic Pro X!

    The 61ES has been doing some really wacky things: I opened it up out of the box for the first time last night and right off the bat the middle octave of notes on the controller were very quiet compared to the high and low notes on the board. It was like the velocity wasn't working properly on those keys or something. The sounds worked fine in Logic when I pencilled them in. But I was too tired to mess around with it more, so went to bed and figured I'd deal with it in the morning. So this morning, the middle octave of keys seems fine, but the middle G just won't play at all. And many of the notes aren't tracking, or playing- especially during fast passages.
    I pulled up Pro Tools 10 and the 61ES worked fine. So something is going on between the controller and Logic. Anyone have any ideas?
    I'm running it on a MacBook Pro with 10.8.5. And the latest version of Logic Pro X- 10.0.6. Thanks for any advice!

    Try this....
    http://www.noterepeat.com/products/m-audio/usb-midi-controllers/axiom-air-series /269-m-audio-axiom-air-series-setup-with-logic-pro-x
    Also make sure you have installed the latest drivers for the Air and Logic...
    Axiom AIR Mini 32 Hyper Control Logic v1.0.2 (Mac)
    Other that that.. Id contact M-Audio support for further help and advice
    http://www.m-audio.com/support

  • Time Capsule does not play nicely with Cisco Router

    Three days ago, I had an older Linksys router attached to our ISP's cable modem by ethernet; the network included a wireless time capsule and apple express base station set up by our son last year (who understands this stuff, but lives 2,000 miles distant).  The router died and I purchased a new Linksys router (E2500).  It is occupying the same spot as the old router, but running with no security settings as yet.  My wife's iMac and two Windows XP laptops work just fine on the network, as well as our NetFlix connection on our TV.  My MacPro, however, can not access the main network - it can see it but won't grab an IP address.  It will, however, see and connect to the router's guest account, although with reduced signal strength.  The Time Capsule is now connected to the MacPro by ethernet (if I make it wireless, it will back up fine, but I can't access Internet or send email on the guest account).  The AirPort Express is unplugged and not a factor.
    Yesterday, I spent most of the day on the phone with Cisco (who claimed AirPort Express will not work with their routers, which I know to be, um, less than accurate), and with Apple Support - who did not help (other than to set up a Genius Bar appointment this morning at the local Apple Store).  The Genius Bar turned out to be a disappointment as well - the MacPro with Time Capsule attached worked perfectly on the main network in the store, but at home, even with a test user account with Admin authority, as they suggested), no go.
    If I unpower Time Capsule, I loose Internet.  With Time Capsule plugged in, I can access my router's guest account -
    Aside from returning this router and starting fresh with a different brand router, any suggestions?
    Thanks for any guidance, suggestions, etc.

    My first reaction is to suggest you ring your son.. !!
    And I guess my second one, would be to remove the E2500, and connect the time capsule directly to the cable modem.. they are equivalent devices. The TC is an excellent wireless router and will work better as the primary router in your network. Turn off the cable modem so it can pick up the new device.. plug the TC directly to the cable modem then turn on both.
    Make sure the TC is working as router.. and you should be able to setup the wireless to connect all your computers etc.
    The E2500 can also be used as a WAP if you need more range. But be aware you have to make sure it uses a separate channel to the TC. Plug it in via ethernet to LAN port not WAN.. and turn off dhcp and set the IP to same IP range as the TC but make it outside the dhcp scope. So for example the TC is running 10.0.1.1 and then make the E2500 10.0.1.254
    The express cannot do WDS to the Linksys.. so what you were told is correct. It may be able to connect via ethernet but not as repeater. But you can do that with the TC now that it is the main router.

  • Spry accordion widget not playing nicely with IE7

    Good day.
    The answer to this issue may be on this forum somewhere already, but I cannot take the time to scour the several hundreds of posts.
    I've build and customized my first spry accordion, which can be viewed at http://www.brianfisherart.com/Bio/Contact/
    In Firefox and Safari, it works perfectly! IE7 however has some issues. the panels get too large on mouseovers, and jumpy and even larger when opening lower level panels.
    Just hoping to find a quick fix.
    Thanx in advance.

    I'm certainly not going to do your search for you, but you might want to see if using the current version 1.6.1 works better.
    http://labs.adobe.com/technologies/spry/
    If that doesn't work, you might want to go to the Spry forum.
    Of course, now that you've posted, I wonder if any of the links in that "More Like This" box apply?
    Mark A. Boyd
    Keep-On-Learnin' :-)
    If you are reading this via email, be aware that it may not be an accurate representation of my message. Login to read the actual message and/or to reply.

  • Flash not playing on Mac OS 10.6.8, Flash 11.8.800.94, Firefox 22.0

    Flash not playing on Mac OS 10.6.8, Flash 11.8.800.94, Firefox 22.0
    Let me also say this flash does work in Safari... just not Firefox. When a flash media link is clicked on FF will go to the link but only a black window appears with no text or error messages or sound.
    As far as I know I am running the latest version of Firefox and Flash. I have no plans to upgrade from Snow Leopord to Lion.
    Another possible data point for this is Flash updates do not install just by clicking on the download. The DMG downloads but I get an unknown data type when it trys to launch. There is an easy work-around for this be simply launching the DMG from Finder where it runs just fine.
    Any thoughts as to why Firefox is not running Flash media files?

    See: http://forums.adobe.com/message/5560631#5560631
    Also, check Tools>Addons to be sure the latest plugin is enabled

  • I have songs on my iPod and iTunes where sections ranging from 40 seconds to 2 minutes do not play.  The song status bar indicates the file is still being played but there is no audio.  What can I do to repair or replace these files?

    I have songs on my iPod and iTunes where sections of the song ranging from 40 seconds to 2 minutes will not play.  The song status bar indicates the file is still being played there is no audio.  What can I do to repair or replace these files?

    If iTunes purchases, delete and redownload by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise delete and resync if they play OK in iTunes on the computer

  • We love apple email, but it does not play wall with other venders when you want to use your own domain (lags, disconnections, etc.)?   What vendor should we use to make it push and work well?  We want to stay with Apple Mail.

    Help, our AppleMail does not play well with other Vendord to use our own domain.   iCloud mail works great, but so far others we have tried lag, disconnec, etc. not nearly as good as icloud mail.   Should we try exchange or office 365 plans with Apple Mail/  a lot more expensive?

    Microsoft Exchange is the best business solution, Office 365 will give a hosted version that works well, as you noted it is not the cheapest. You should also look at Zimbra, an excellent service.

  • Can I get an older release of Firefox? 36.0 does not play well with Windows 7.

    Firefox 36.0.4 does not play well with Windows 7. If it opens at all, it freezes within a minute so the screen goes pale and I get the classic spinning circle of death. Then the header says (not responding).
    Ideally I would like to drop back to version 32 or 33, but 34 and 35 had fewer problems.
    Can I find older versions anywhere?

    You can [[Install an older version of Firefox]] any time. But which will cause significant security risk. So If you can't use the latest version of Firefox, we recommend that you use the latest version of another browser.
    If the latest version of Firefox is causing problems for you or you just don't like something about it, please give us feedback about it here:
    [https://input.mozilla.org/en-US/feedback/ Submit your feedback and suggestions about Firefox]
    Anyway head for the ftp for older version but please be careful with these: ftp://ftp.eu.mozilla.org/pub/firefox/releases/

  • I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.

    I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.

    This category is for iPod shuffle.  Is that the type of iPod you have, because your description of the problem does not sound like it's about a shuffle?  If it's not a shuffle, what is the iPod model...?
    There is music there and I can play it connected to laptop.
    Are you doing the playing using the iPod, or are you playing the music using iTunes on the laptop?
    All mucis icons read "No music" and this is not correct
    Do these icons with "No music" appear on the laptop's screen, or on the iPod's screen

  • Since my IPOD Touch upgraded to IOS 8.1.2 it will not play well with my 2013 Charger's UConnect entertainment system. It will not build a library so I can not Browse or Shuffle. The only thing Is there a fix for UConnect issue?

    Since my IPOD Touch upgraded to IOS 8.1.2 it will not play well with my 2013 Charger's UConnect entertainment system. It will not build a library so I can not Browse or Shuffle. The only thing it does is list all the songs alphabetically when connected via USB.

    - Contact the manufacturer/go to their support site.
    - Sometimes this works
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    Sometimes and ISO update breaks compatibioity and a firmware update the the dock is required or an iOS update is required.
    Downgrading the iOS is not supported by Apple.

  • Anti-virus that will play nicely with VMWare Fusion

    I am using VMWare to run my Boot Camp installation of Windows 7 (64-bit). I want to install anti-virus software that will play nicely with my Boot Camp installation and the same installation when run from within VMWare. I am thinking of Symantec or McAfee (which comes with VMWare). Any recommendations?

    The hatter wrote:
    I would start by asking on VMware Community, stay away from the others, give Microsoft Security Essentials (2.0 beta preferably) instead.
    http://www.microsoft.com/Security_Essentials/
    https://connect.microsoft.com/securityessentials
    Thank you. I have installed Security Essentials and things seem to me smooth so far.

  • Progressive Flash Not playing properly from remote server

    I have Flash CS3.
    PROBLEM: I've encoded a video using Flash's CS3 "Progressive
    Download" option and then uploaded the resulting video (along with
    it's associated files created by Flash ie: .fla, .swf, script
    folder with action script, etc.) to my server (webpage and video
    was created through Dreamweaver CS3).
    RESULT: A flash video that plays on the web, but has pink
    colored digital boxes that breakup the picture... poor quality.
    Please follow this link for an example:
    http://rivhawk.tripod.com/index.html
    I've watched multiple step-by-step tutorials by Adobe for
    creating and uploading Flash video, both with Flash CS3 and even
    Dreamweaver CS3. I've tested by creating the flash content in Flash
    CS3 and directly through Dreamweaver. The same digital noise, pink
    blocks occured.
    NOTE: Before uploading the flash content and associated
    files, I tested the flash video in my browser through Dreamweaver
    (from my local directory, not remote server)...and it
    plays/operates perfectly. It's only once it's uploaded that the
    problem occurs.
    I've encoded the video with Flash 8 and Flash 9 at low,
    medium and high qualities...same results (even by different
    computers accessing the content on the internet). It happens in
    Firefox and Internet Explorer.
    After 3 days of tests and research (and viewing samples of
    other beautiful progressive download videos on the internet) I'm
    wondering if I am missing something very simple, if there is a bug,
    is this a known issue etc.
    Please help, and please understand that I've been through all
    the tutorials on creating/using Flash Video...and specifically
    using the Progressive Download option for use on remote servers
    that don't have the Flash Media Server.
    Please assist.

    > Hi, I am very new to the video thing. I created a Flash
    swf that plays an
    > flv
    > file and everything works fine when I upload the swf and
    the flv file to
    > the
    > same directory on our web server. We'd like other web
    sites to be able to
    > place
    > this video on their site, but we do not want to give
    them the actual
    > files,
    > rather have the video files pull from our server.
    You can play video from any server by using a full URL ie
    http://www.anotherdomain.com/flashvideo.flv
    <param name="movie" value="videos/rep.swf" />
    Looks like you're building an FLV player in Flash to play
    your video rather
    than embedding it using DW. If so you need to open the source
    FLA you used
    to generate 'rep.swf' and insert a full URL to your flv file,
    then publish
    the swf and upload again.
    > I've tried changing the value and embed source tags to
    be complete urls
    > referencing the actual video location, but I still get
    an error saying the
    > flv
    > file cannot be found. Is there a way to do what I'm
    requesting?
    As above, or you can just embed the video on a web page in
    DW, using a full
    URL to your flv. If your flvs are on a server and you are
    connected to the
    internet, you should be able to play the flv using preview in
    browser before
    uploading the page.

  • Can one button type play nicely with others?

    So, I'm creating this nice little movie that has 5 or so
    buttons on it (think: click on image to see painting, like a
    gallery) and I've got four of the buttons working nicely with a
    little help from my friend Actionscript 3.0 (eventListener and his
    friend gotoAndStop and some others). These buttons go to a new
    keyframe in the movie that contain the images for each button.
    Relatively easy.
    My question concerns the last button. This button wants
    information (text) to pop-up or go away when clicked irrespective
    of what frame the movie is on. I can't for the life of me figure
    out how to get this done. And in a related question, is it possible
    for this button to stay in it's down state until clicked again
    (like a pause/play button on a music player)?
    Sorry in advance for this lame question and thanks for any
    input.

    Either create a movieclip with text and control its
    visibility with the button, or have a textfield and assign/remove
    text.
    You cannot make a button hold a state when mouse events
    change for it. You can either create a movieclip version of it and
    control where it is in its own timeline, or have two buttons, one
    drawn for the normal state and one drawn for the down state, and
    control their visibility between each each on clicking them....
    click one, it makes the other visible and itself invisible,
    etc.

  • [SOLVED]Compton, Conky and RXVT-Unicode not playing nicely

    Hello. I'm having some problems making my desktop how I want it. My window manager is fluxbox.
    First problem is just a minor inconvenience, but annoying. When I login, a transparent terminal spawns to my specification, but it is skewed.
    http://i.imgur.com/hrEEh3H.jpg
    However, as soon as I open any window it fixes itself
    http://i.imgur.com/WXQZ9e3.jpg
    Second problem is that I can't figure out how to remove the shadow under conky. I know that it is coming from the slit, but it just won't go away. I can get it to go away if I set conky to desktop instead of panel, but then when I launch any window it overlaps with the conky bar, and that is unaceptable. Maybe there is a fluxbox configuration option that reserves some space so nothing can overlap it? But I couldn't find anything.
    Here are the config files I think are relevant:
    .Xdefaults:
    urxvt*.transparent:true
    urxvt*scrollBar:false
    urxvt*borderLess:true
    urxvt*foreground:blue
    urxvt*.highlightColor: yellow
    urxvt*.colorUL: #4682B4
    urxvt*.cursorBlink: 1
    urxvt*font: xft:Terminus:pixelsize=12
    urxvt*.perl-ext-common: default,matcher,tabbedex,readline,clipboard
    urxvt*.url-launcher: /usr/bin/firefox
    urxvt*.matcher.button: 1
    URxvt.tabbed.autohide:true
    .conkyrc:
    #avoid flicker
    double_buffer yes
    #own window to run simultanious 2 or more conkys
    own_window yes
    own_window_transparent yes
    own_window_class conky
    own_window_type panel
    own_window_hints undecorate,above,sticky,skip_taskbar,skip_pager
    #borders
    draw_borders no
    #shades
    draw_shades no
    #position
    gap_x 6
    gap_y 6
    alignment top_left
    #behaviour
    update_interval 1
    #colour
    default_color 8f8f8f
    wn_window_colour 262626
    #font
    use_xft yes
    xftfont terminus:pixelsize=10
    #to prevent window from moving
    use_spacer left
    minimum_size 1600 0
    short_units yes
    pad_percents 2
    #mpd
    #mpd_host localhost
    #mpd_port 6600
    imap localhost [email protected] xxxxxxx -i 120
    #color = e0e0e0
    TEXT
    ${voffset -1} Cpu: ${color 000000}${font}${cpu}% ${color} Mem: ${color 000000}${font}${mem} ${color} | ${color} Uptime: ${color 000000}${font}${uptime_short}${color} | ${color} Download Speed: ${color 000000}${font}${downspeed wlp0s26u1u4}/s ${color}Total Downloaded: ${color 000000}${totaldown wlp0s26u1u4} ${color} | ${color} Upload Speed: ${color 000000}${upspeed wlp0s26u1u4}/s ${color} Total Uploaded: ${color 000000}${totalup wlp0s26u1u4} ${color} | ${color}Root: ${color 000000}${font}${fs_free /} ${color} Home: ${color 000000}${font}${fs_free /home} ${color} | ${color} Arch-pkg: ${color 000000}${font}${execi 300 perl /home/lucas/.scripts/conky-updates.pl}${color} | Email: ${color 000000}${imap_unseen} new messages ${color} | ${color} Weather: ${color 000000} ${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ SBBR temperature}°C ${color}
    .compton
    shadow = true;
    no-dnd-shadow = true;
    no-dock-shadow = true;
    clear-shadow = true;
    shadow-radius = 7;
    shadow-offset-x = -7;
    shadow-offset-y = -7;
    shadow-exclude = [ "name = 'Notification'", "class_g = 'URxvt'", "class_g = 'Conky'", "class_g ?= 'Notify-osd'", "class_g = 'Cairo-clock'" ];
    shadow-ignore-shaped = false;
    # Opacity
    menu-opacity = 0.8;
    inactive-opacity = 0.8;
    frame-opacity = 0.7;
    inactive-opacity-override = false;
    alpha-step = 0.06;
    blur-kern = "3x3box"
    blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
    opacity-rule = [ ]
    # Fading
    fading = true;
    fade-in-step = 0.03;
    fade-out-step = 0.03;
    fade-exclude = [ ];
    # Other
    backend = "glx"
    mark-wmwin-focused = true;
    mark-ovredir-focused = true;
    detect-rounded-corners = true;
    detect-client-opacity = true;
    refresh-rate = 0;
    vsync = "opengl-swc";
    dbe = false;
    paint-on-overlay = true;
    focus-exclude = [ "class_g = 'Cairo-clock'" ];
    detect-transient = true;
    detect-client-leader = true;
    invert-color-include = [ ];
    # GLX backend
    glx-no-stencil = true;
    glx-copy-from-front = false;
    glx-no-rebind-pixmap = true;
    glx-swap-method = "undefined";
    # Window type settings
    wintypes:
    tooltip = { fade = true; shadow = false; opacity = 0.75; focus = true; };
    Last edited by Chetyre (2014-04-10 16:51:23)

    using lowercase conky in compton doesn't change anything. I'm pretty sure that shadow is not from conky, but from the slit. When I set the slit to autohide in the init file, the shadow hides as well. And there is no shadow in any other conky window type I've tried, except type panel. Unfortunately, it is the only one so far with the behavior I want.
    I would like to use true transparency in urxvrt, since that does solve the skew issue and I think it looks better. However, in doing so the terminal is quite useless since there is a lot of text that I can't see, because the font becomes the same color as certain backgrounds. Unless there is a way to separate it? I want it to look like the one on the left (left = fake transparency, right = true transparency).
    http://i.imgur.com/lUwk4F4.jpg
    Last edited by Chetyre (2014-04-09 02:50:27)

  • 3GPP media not playing correctly with QT7.1

    Hi!
    I have one file (3GPP media) that plays awfully bad with QT7.1. There are a lot of "squares" and strange colors that appears the whole time while playing. The same file plays OK with a free player called VideoLAN (VLC). Why can not QT7.1 play the same file as good as VLC on the same computer? What can I do to fix this?
    Dell Dimension 4550   Windows XP Pro  

    i did read somewhere a while back that Cyberlink (creators of PowerDVD) were developing a software MPEG2 encoder that would allow software-driven analog tuners to work with MCE, but i haven't heard anything since...
    the actual limitation is down to Microsoft themselves

Maybe you are looking for