Flash not working in Windows 8.1 x64 with Internet Explorer 11

I updated my Windows 8 to 8.1 and Flash has stopped working in IE11.  Flash still works fine in Firefox.  I have tried to use the patches available from Windows, but the patch won't install because "not applicable to your version". 
The Flash verification page says "You're not running Internet Explorer in Windows 8".  I have tried all the troubleshooting I can find, and no positive results as of yet.  Thanks...

Hi,
Please be aware that Flash player is embedded in Windows 8.1.
Regarding this issue, please try following steps to check the results:
Update for Internet Explorer Flash Player for Windows 8.1 and Windows 8
http://support.microsoft.com/kb/2886439
Flash Player Help / Flash Player issues | Windows 8
http://helpx.adobe.com/flash-player/kb/flash-player-issues-windows-8.html
If the issue still persists, please post back the detailed information about the error message when you try to use flash and the event log about your issue.
Keep post.
Regards,
Kate Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Flash not working on Windows 8.1

    My flash player is not working on windows 8.1 (64g) with internet explorer. I have troubleshooted several times, and active x filtering is not checked off in the safety tab under settings and under manage add-ons shockwave flash is enabled. These are the only things that I can do to get it enabled according to the adobe website. What else can I do to make flash work on windows 8 in internet explorer?

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • WP 8.1 Emulator not working on Windows 8.1 x64

    Windows Phone 8.1 Emulator not working on Windows 8.1 x64 
    Ram 2GB,Hyper-V is enabled
    Error:Windows Phone Emulator is unable to set some properties on the virtual machine :
    1.Couldn't change memory of virtual machine'xyxyxyxyxyxyyxyx' failed to modify device 'Memory'.(Virtual Machine ID'xyz123-xyz123-xyz123-xyz123-')
    2.Invalid start-up memory assigned for 'xyxyxyxxyxyxyxxyxyyxyx'.
    Please help
    Nekvinder Singh

    You're welcome.
    Sorry, I can't know what the exact problem was. Many things don't start in Windows Safe Mode, like third-party security software and included security tools like Windows Defender. You can use the following guide if you want to troubleshoot the issue. The "How to determine what is causing the problem by performing a clean boot" section is the relevant part.
    * [http://support.microsoft.com/kb/929135/en-us How to perform a clean boot in Windows | Microsoft Support]

  • Flash Not Working Sometimes - Windows 8 + Google Chrome

    Please help as I have restore the Windows 8 back to factory setting but the problem still exist.

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • EPrint for windows 7 64 bit with internet explorer 10

    When will HP create a eprint for 64 bit windows that work with internet explorer 10 and 11?

    No worries at all. According to this: Internet Explorer 9 and Later Versions are Not Compatible with HP Smart Web Printing, the new version of HP Smart Print is compatible with IE 10 and earlier.
    Also, this Thread: Re: HP Smart Print v2.1 and IE10, answered by  VisionAiry, has a great suggestion and walk through to get HP Smart Print on Google Chrome.
    I hope this information as helped.
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Remote desktop connection not working in windows 7 Pro x64 bit sp1 3389 port not working

    i have still facing same problem in last two week in my  system RDC not working . i have installed in my system windows 7 x64 bit Pro sp1 then i check 3389 port working or not  in my system use the command netstat -a -o command in
    command prompt but this is  my bad luck  its not woking in my machine after i have decide to change RDC listening port via registry  i have change it 3389 to 3391 after restart my system,  and
    after again testing using same command but no any change again rdc not listening . After i have  search this issue on search engine google bing and microsoft , i have found more solutions  but i have try one
    uninstalled two microsoft updates first is kb  KB2621440 second is KB2667402 and after again restart my system and again installed KB 2667402 But not change i have already enabled Remote Desktop connection in windows 7 and select the option
    any version computer running , i have try  three and four time enable  disable remote desktop connection in my machine . but not change i have all windows firewall disable and uninstalled anti virus they intalled in my machine , and using the Mcafee
    stinger tools to scan my machine to remove virus but stinger is not found any thread in system.  ihave already run this command in my system sfc /scannow  Please Can you help me to fix  this issue.

    Hi,
    When you try to start the Remote Destop Connection, what errors it showed out?
    Could the other PCs connect this PC with the RDC?
    So you have read this blog?
    RDP connections might fail due to a problem with KB2621440 - MS12-020
    Did you reinstalled the KB2621440?
    Besides, did you follow this guide to enable the RDC connection?
    Connect to another computer using Remote Desktop Connection
    And also this guide?
    Why can’t I connect using Remote Desktop Connection?
    Please take a check with those settings again.
    Best regards
    Michael Shao
    TechNet Community Support

  • Network adaters -BlackBerry Device not working in windows 8 when coinnected with usb cable

    I was unable to find my plabook in the network or any mounted volume when I connect w8x64 pro to the playbook via usb cable despite the blackberry device manager is loaded on connection
    in devce mgmt I found
    Device Type:   Network Adapters
    Manufacturer:  Research In Motion
    location:          0000.001d.0007.005.000.000.000.000.000
    Device Status:
    This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
    ------------------- Events Tab--------::
    Driver Management concluded the process to install driver rimpb_rndis.inf_amd64_c255bed1a35b762a\rimpb_rndis.inf for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0x0.
    Driver Management has concluded the process to add Service usb_rndisx for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0.
    Driver Management concluded the process to install driver rimpb_rndis.inf_amd64_e3f4ab2c803293ee\rimpb_rndis.inf for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0x0.
    Driver Management has concluded the process to add Service usb_rndisx for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0.
    Driver version: 2.0.0.32
     Itried to update the device but it's up to date
    what Can I do?

    hi Suman Shrestha,
    Welcome to the Lenovo Forums.
    Your issue might be similar to this thread.
    Although this is for a Windows 7 machine, can you try the solution that was posted and see if the problem gets fixed.
    Let me know your findings
    Cheers
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Alt ctrl c shortcut command not working in photoshop cc, it is opening Internet explorer (IE)

    In Photoshop CC 2014  Alt + Ctrl + C ( to open for canvas size dialog box ) command not working, it is opening Internet Explorer (IE)

    What version of windows are you using?
    See if the Internet Explorer shortcut has that keyboard shortcut assigned to it.

  • Firefox 4.0 is not working for Vista..error messages regarding Internet Explorer, yahoo, consistently hanging on all websites, facebook, aol, etc.

    I updated from 3.6 to 4.0 Firefox. Multiple problems with programs, security, websites, etc. i have Windows Vista on my computer and disabled Internet Explorer. When I turn on my computer i get error messages regarding 3rd party being disabled in IE and I disabled IE so I do not understand i have run scans on my system I need a total clean up as firefox messed up all my settings.

    mixalis88,
    I appreciate the suggestion, but that did NOT fix the problem. I, however, HAVE fixed the problem...I now use Google Chrome as my browser.
    It may not be perfect, but it correctly displays the websites I visit most, and I dont get that Goddamn annoying re-direct page in Google like I do in FF.
    I use to LOVE FF...but until they work out the bugs, I'm done with it.

  • Firefox worked on my laptop in UK, but here in USA, it does not work on my Brighthouse Wireless Network, but Internet explorer does. What setting do I ned to change?

    As above, I have also tried downloading a later version, also tried downloading Google Chrome, none work. I have tried using my laptop at several different wifi connections in USA and Firefox does not work on any. So it is not a wifi set up problem in our home in USA. I am running X.P and I.E 6. When I downloaded I.E 8 that would not work either, so I had to re set the laptop back to a date a week ago.
    Unable to access certain bank sites with I.E 6, that is why I use Firefox. Any suggestions appreciated.
    This is the message I get
    "Unable to connect
    Firefox can't establish a connection to the server at webmail.apscontrol.com.
    The site could be temporarily unavailable or too busy. Try again in a few
    moments.
    If you are unable to load any pages, check your computer's network
    connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"

  • Is Flash Player 11.2.202.235  in conflict with Internet Explorer 9 ?

    I am using Windows Vista 32-bit in Dell Desktop. I have recently upgraded the Internet Explorer from Version 7 to 9 via 8. I have installed Flash Player 11.2.202.235 compatible with Windows Vista 32-bit pack 2. But I am experiencing that IE9 cannot function smoothly. I am apprehending IE9 is in conflict with Flash Player 11.2.202.235. If that is so, please advice me about necessary settings that I need to carryout to solve the problem.

    Bhaisona wrote:
    IE9 cannot function smoothly
    Sorry, I cannot understand what that means; can you elaborate?
    IE9 works very well with Flash Player 11.2.202.235 on my machines (Windows 7).
    Maybe you should revert to IE8?

  • How come when i logg in to facebook it will load, but when i go into games like farmville it does not load, but the games will load with internet explorer?

    i play games on face book, like farmville, frontierville, it will load the main page that shows all your friends and things that have been posted, but when i click on farmville to actually go into my farm it will not load, it says if it don't load in 10 seconds, update your player, i have tried that and it still don't load..... but i can go out of firefox and use internet explorer and the games will load... can you help me fix this, i use fire fox foe school work in college and would like to use it playing games as well.

    Try using the Facebook app instead of Safari for viewing Facebook content.

  • Adobe Flash not working on Windows 7 32 bit!?

    "The specified module could not be found C:/Program Files/Common Files/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.DLL" is the message that comes up everytime I have Adobe Flash CS4 installed and right click near any file, just not in open programs. After right clicking and having this annoying message pop up, it restarts Windows Explorer. Whenever I uninstall the program everything's fine, however I want to use this product (free trial) but none of my downloads and installations of it (at least 5) have worked! I check for a VersionCue.DLL and I can't find it, also when I choose things like Action Scriptt 3.0 and 2.0 or any other selection at the start up menu, it freezes and quits! I can't run as Admin because the message constantly pops up! Please help!
    PS: Sorry if this shouldn't be posted here guys, I'm frustrated and I need to post this somewhere where someone may answer me!

    http://kb2.adobe.com/cps/408/kb408524.html

  • IDRAC6 racadm not working on Windows 2008 R2 x64 Server

    We have Dell PowerEdge M910 on a M1000e Blade Chasis
    iDRAC is Accessible via its Web Site and racadm -r works on different Server
    But on the Actual Machine its giving me the Error of:
    ERROR: RACADM is unable to process the requested subcommand because there is no
    local RAC configuration to communicate with.
    Local RACADM subcommand execution requires the following:
    1. A Remote Access Controller (RAC) must be present on the managed server
    2. Appropriate managed node software must be installed and running on the
    server
    Is there anyway to resolve this like Re-installation of Certain Software? or Anything that would make the racadm work when running on the server itself
    Search Google and this Forums and this problem seem to be unique.
    Lifecycle Controller Firmware is 1.6.5.12
    Firmware Version is 3.60 (Build 3)
    Operating System is Microsoft Windows Server 2008 R2, Enterprise x64 Edition
    Any help would be greatly appreciated

    Many Thanks for your Reply 
    Since iDRAC is accessible via it IP Address I have done the following but NOT successfull.
    racadm -r <IPAddress> -i racreset soft/hard (with and without -f flag)
    Also Reset using the Blade Chasis iDRAC and Server's iDRAC
    I dont think there is something wrong with the iDRAC, as this is accessible using the iDRAC Web GUI and command line interface with the "-r" flag.
    The issue is running the racadm (without and -r) on the server itself and getting the error mentioned above
    Is there a way to check the any Logs file and or is there any Windows Server Service's Component that is needed by racadm command in order for it to function when running locally?
    BTW
    OMSA is at 7.4.0.2
    Lifecycle Controller Firmware is 1.6.5.12
    Firmware Version is 3.60 (Build 3)
    Thanks and Best Regard

  • Flash not working on Windows 8.1, 64 bit, Flash Player 15 it is so bad I cannot use any browser or web page including Adobe, it has taken me an hour to get here

    I have Windows 8.1, 64 bit, Flash Player 15, and use Firefox browser, Flash Player keeps crashing on every web page including Adobe, I cannot play games, this is a screen shot of the problem
    I have done all the FAQ's disabled hardware acceleration, cleared caches, etc, etc, it is so bad that I cannot browse the internet or play game unless I want to spend hours trying to get 30 mins browsing or gaming

    I have Windows 8.1, 64 bit, Flash Player 15, and use Firefox browser, Flash Player keeps crashing on every web page including Adobe, I cannot play games, this is a screen shot of the problem
    I have done all the FAQ's disabled hardware acceleration, cleared caches, etc, etc, it is so bad that I cannot browse the internet or play game unless I want to spend hours trying to get 30 mins browsing or gaming

Maybe you are looking for

  • How to enable Navigation tab in PDF

    Hi, Can any one help me on this. I have nearly 100 PDF document. When I open the PDF,  the pdf should opened with Bookmark  view. I found this option under Document Properties --> Initial View --> Navigation tab  (Bookmarks Panel and Page). But i nee

  • SUS Error

    Hello SRM Expert, We are in the phase of implementing  SUS (EBP SUS scenario).  We are able to transfer PO from EBP to XI successfully but in SUS it comes with the below error in sxmb_moni transaction "XML PO). "An error occured within an XI interfac

  • Clientgen classpath problem

    Hi there, I have a problem using clientgen to generate the client jar stuff for a web services client. In ant I put webservices.jar and weblogic.jar in my classpath (in the taskdef for clientgen) but the task can't find jax-rpc classes like javax.xml

  • Zenworks to SCCM before Exchange migration??

    We are currently a Novell shop and will be moving to all Microsoft in the next year. With that said, would you recommend having SCCM in production before migrating from Groupwise to Exchange?

  • Gday i erased my imac from my ipad using the find iphone app,how do i restore it back 2 factory settings

    gday i erased my imac from my ipad using the find iphone app,how do i restore it so it can b used again