Flash not working properly in FF

I'm using Firefox 2.0.0.1 but it aso happened with 2.0. The
same goes for the flash version, i'm using the last version but had
the same problem with previous version. Flash loads well but when
clicking on it nothing happens. It's annoying because i can't do
anything on flash sites. It works with IE engine though.
I tried to unistall flash player, restart, install it again
but that didn't solve it. I'm sure it's a problem of my computer
because I don't have any problems with FF and flash at work.
Any help appreciated.

I have found the error seems to be with flash player 8. I
unistalled all the flash player programs, codecs, and registry
entries, then reinstalled flash player 6. As long as I ignore the
nag screen from flash sites to update to the latest version of
flash player, I have not been having any problems. Of course, I
cannot see the the flash applications built for version 8, but all
the older applications work fine.
Hope this helps.
PS: If any Adabe staff read these forums, I will reiterate
that THE ERROR IS WITH FLASH PLAYER 8!!!
VSCollins

Similar Messages

  • Adobe Flash Not Working Properly

    The following problem applies to both I.E. and Firefox.  Also, I am updated to the latest version of Flash: 11.4.402.278.  Keep in mind that I have tried everything that I could find concerning this problem.  Also, I am using Windows XP SP3 32bit.
    I used to be able to watch video from any website that had videos to watch but recently I was not able to watch any, not even on YouTube.  However, after uninstalling and reinstalling Flash I can now watch a few of the YouTube videos and nothing from any other web site.  On YouTube, sometimes it works better if I disable Flash. However, when a note appears saying I need Flash, and I Re-enable Flash, it still won’t work.  No notice saying anything, it simply will not play the video.
    Also, if you are familiar with NetFlix, on their web site, when you hold your mouse pointer over a video title a popup is supposed to appear telling you about the video.  That stopped working too.  It's all screwed up and I don't know what happened.
    Also, when I finish reinstalling Flash (which I have done a few times lately (after uninstalling and carefully following the instructions in the Uninstall Video)) and I am automatically taken to the Adobe page which tells me I have successfully installed Flash, I never get the little animation.  It says Flash is properly installed but I never get the animation to show it is properly installed. 
    Also, on other sites that have test animation to show that Flash is installed and working, their animations never appear either.  The problem is also evident when trying to use the websites that test my internet speed. I no longer get the applet or interface on the upload and download test sites.

    Pat
    No, there is no animation.
    As stated on my original post, I have uninstalled and reinstalled more than
    once.  Each time Adobe says I have successfully installed Flash but there
    is never an animation on either the Adobe site or anyother site.
    Sometimes when attempting to watch a YouTube Video, like the Scorpions
    performing Drive by the Cars (awesome acoustical version) it will not play
    unless I disable Flash.  Then trying to play a different video it says I
    need flash so I re-enable flash and it doesn't work.  In case you are
    wondering, the video that says I need flash did not work before I disabled
    flash and it did not work after re-enabling flash.
    Before writing this reply I completely uninstalled flash following the
    instructions on Adobe site and then reinstalled flash and it's the same as
    usual.  Adobe says it's installed but no animation and still have the same
    problems with web videos.
    This all started a couple weeks ago. Before that I had not problem.
    Larry

  • Strange problem: flash not working properly in IE

    http://avcgroup.golive.titaninternet.co.uk/
    This is a link to the webpage where is my flash gallery. When
    u open the it u will see the gallery on top, little pictures will
    appear and will slide to the left. When u click on a small picture,
    a big picture will appear of the same little picture. The problem
    is that in mozilla firefox and opera for example it works perfectly
    but when u open it with interner explorer 7, most of the times when
    u click on a small pic, just the window where the big pic should
    load shows up, but the pic doesn't load... if u close it and open
    it second time it opens. The script is the same for all pics. I
    don't understand why it is not working in IE. Anyone with more
    experiance should have already faced this problem.. and maybe
    figured out why this happens... please help !
    Thanks in advance.
    P.S.
    The link is temporarily, so to speak it content changes cuz
    of testing differnt things so u will see my gallery if the date u
    read my question is close to the date I've made this post.

    I'm also having extreme problems with Flash. I did the
    uninstaller thing too, I re-booted over & over again & it's
    still not working. I can't view anything that uses Flash!!! It
    shows up as being installed on my computer, but all the websites I
    go to say "you don't have the new version installed-install now."
    There's a link to install, I get the pop up on my toolbar to
    install Active-X, but nothing happens.
    If anyone has new info...please help

  • Flash Not working Properly?

    Hello Forum.  I have an EOS Rebel XS / 1000D.
    A couple of  'flash'  issues I need assistance with or perhaps advice. 
    1. In Auto mode there are times the flash will open even in bright daylight shooting well lit subjects or scenery.  This has also happened, oddly enough, a few times when I'd be wearing a wearing a ball cap.  Shadow?  Seems overly sensitive.
    2. In natural daylight, using creative modes such as "P" the flash button will open the flash but it won't fire when taking the shot.  On the other hand if I move inside a building (lower light condition) and repeat the same process,  the flash will fire when I take the shot.
    *My understanding is that if I manually open the flash in creative modes, regardless of lighting conditions, the flash should fire when I take a shot.
    TIA for your input.
    -al

    The manual which I so freely read, clearly states to put the camera in "P" mode, push the flash button on the camera body and the flash will open and flash will work when taking the shot.
    What documentation are you quoting from?
    [Mod note - removed link per FORUM GUIDELINES]
    XSI Manual can be found on the Canon Website HERE. Once there, go to the bottom of the list and look for "EOS DIGITAL REBEL XSi/EOS 450D Instruction Manual." 

  • Flash not working properly in Internet Explorer 6

    Hello,
    Flash images are not displaying correctly in Internet
    Explorer 6. I have checked in Internet Explorer 7 and it is working
    fine.
    Could someone help me to fix this issue ?
    I have checked the Tools->Security->Custom
    Level->Run Flash image and it is enabled.
    Regards,
    PHP Developer,
    India.

    Hello All,
    Thank you for reading this topic.
    The issue above is due to the flash player plugin. I have
    checked from another explorer of same version and it is working
    fine there.
    Could someone help me to delete this topic? I don't know the
    stpes to delete a topic from the forum.
    Regards,
    PHP Developer.

  • Flash player does not work properly on Windows 7 32 bits

    Hello,
    My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
    My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
    I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
    In fact, it works correctly on some sites, like youtube, but not on some others like :
    http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
    http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
    http://www.myspace.com/ => no audio player, right click gives flash context menu
    some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
    I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
    No problem too with flash player on http://www.adobe.com/software/flash/about/
    But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
    I cannot check boxes,
    My changes are not saved.
    In most of flash animations, videos, ...,
    when I click on parameters, I cannot do anything, even closing.
    when I am in full screen mode, the message "press escape to exit...." does not disappear.
    Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
    Thank you for your help

    Hi eidnolb
    Thanks for your answer.
    This is what I have :
    Verify user permissions
    I have an administrator account.
    I tried (uninstall, install and run) with super-administrator account for same results
    Install the most current version.
    I am running the latest version (10.0.45.2)
    Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
    I did not "clean" my computer.
    Troubleshoot Pop-up blockers
    I have no Pop-up or esle blocker  software.
    Ensure that Internet utilities do not block Flash Player
    I tried (uninstall, install and run) without Avast.
    I have windows 7 firewall. I do not know where I can allow ActiveX  controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
    Fix machine crashes when displaying Flash content
    I have no freez or crash.
    Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
    Using FF, I have SWF vs  10.0.45.2 and it is Enabled
    I really do not understand !!
    Thanks,
    Ju'

  • I have lost track of the number of websites that do not work properly on the iPad without Adobe Flash player which is unsupported. I cannot use retail sites, billing sites and most important of all job application sites. All are missing tabs, links, info

    I have lost track of the number of websites which do not work properly on my iPad. They include retail sites, billing sites and most important of all job application sites. They all seem to require Adobe Flash Player which cannot be downloaded onto an iPad. Skyfire does not solve the problem. They all load without vital parts of the site such as tabs, links and correct formatting. Any suggestions?

    Most such brower/service combinations have a difficult time working with Flash-based apps and often fail completely. Flash videos are usually the most successful content these browers can handle. You can try the others apps - Puffin, iSwifter, etc - but you may find that none of them work, in which case you will not be able to use your iPad with these sites other than by using one of the various remote control solutions to take over a computer running the full Flash Player.
    IMHO, any developer that built a Flash application for a billing or job application site was an idiot, but I know that's out of the control of anyone but the relevant company.
    Regards.

  • Flash Player installed but not working properly

    I have Windows 7 64 bit, and run IE11.
    I have Adobe Flash Player installed.
    It works fine on my login (administrator) but my young Son can not watch video's, as it says Flash Player is not installed.
    How do I fix this please?

    Flash Player has updated to 11.87.800.175 today; is it working better?
    If not, what means "not working properly"?

  • Flash players not working properly

    hi there, since i have reinstalled my laptop, i am having
    problem watching online videos properly, its like sounds comes
    perfect, the video slows down and even stuck, cant watch whats
    going on in the video. Could you please guide me how to rectify
    this problem. The video streaming is not working properly as the
    sound streaming is fine. Our internet is fine as its been check on
    another Laptop and a Desktop Machine. Kindly reply me back asap.
    Many thanks.
    Regards,

    Hi Harvardbothun-
    I still don't know what "reinstalled my laptop means". Put it
    back on your lap? Humor...arr-arr.
    Anyway, you have Firefox with the latest FP10 plug-in. Have
    you verified this with the "Version Tester"
    http://www.adobe.com/software/flash/about/
    and checked the support pages at
    http://www.adobe.com/support/flashplayer/
    I ask these questions not to be mean, but to verify your
    version and make you aware of the differences between IE FP
    (ActiveX) and FF FP (plug-in). Also... the version checker will act
    funky if you have 2 different FP versions installed, such as your
    XP's OE IE and your added FF. Look in Control Panel, Add/Remove
    Programs. Do you see a previous version of FP there? You may need
    to update your IE's FP as well, it could be conflicting with your
    FFFP.
    Another thing to check.... AVG8's Linkscanner has caused some
    issues, mostly by slowing down site-loading. To test this, turn
    off/diable that feature. Yes, it'll whine about it. (end of part 1)

  • Flash app works properly in IE / Firefox, not in safari

    This is a flash app I designed for our career center at UNR, and its not working properly in safari.
    The TV towards the bottom is the app. When you click on an image it is supposed to take you to the corresponding companies webpage.
    It works fine in IE, Firefox, and Firefox for mac, but it crashes safari for windows, and on safari for mac, the logos and links are out of sync and I cant figure out why. Any help is appreciated, thanks!
    edit: http://www.unr.edu/career/jobs/index.aspx
    Message was edited by: inphamous

    Worked for me. Are you sure you have the most current version of the Flash plugin?

  • Adobe is not working properly not able to view videos or games

    adobe flash player not working properly and not able to view videos or games

    Welcome to the Adobe Forums.
    The more information you supply about your situation, the better equipped other community members will be to answer. Please supply the following Information that you haven’t already (where applicable):
        •    Adobe product and version number
        •    Operating system and version number
        •    Browser and version number (where applicable)
        •    The full text of any error message(s)
        •    What you were doing when the problem occurred
        •    Screenshots of the problem (if possible)
        •    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • Swf is not working properly when upload to server

    I develop 1.swf which is having 3 buttons each one having
    anather .swf to call 2.swf, 3.swf respectively.
    This application is running perfectly on my PC, but
    While uploading the swf to server the 2.swf and 3.swf is
    not running. Can any one tell how to recover from this kind
    of problem.

    justbipin wrote:
    > basically my code working perfectly,
    > but its not working properly when upload to server
    > can anybody having any ref. or link to solve this
    issues.
    why is that we insist on seeing the source file ?
    There is no one way of doing things in flash and no one can
    help
    you based on "does not work description".
    This is way to broad of a subject to even try to guess.
    Same as asking "my car does not work, what's up with
    that"....
    Please upload the problematic file and provide url for us to
    check.
    Otherwise you need to try to troubleshoot it yourself as we
    can't
    guess from here what possibly is wrong with that file.
    Regards
    Urami
    Happy New Year guys - all the best there is in the 2006 :)
    <urami>
    http://www.Flashfugitive.com
    </urami>
    <web junk free>
    http://www.firefox.com
    </web junk free>

  • I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

    I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly.  The wireless light is blinking green very quickly and I connect and disconnect from the network constantly.  How do I get the router to work properly

    Hello James,
    The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
    Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
    Hope this helps,
    Thanks
    Vijay

  • SWF file not working properly in Explorer

    I have made a kind of slide show showing jpg images loaded
    from the web in an swf file, and it will not work properly. It is
    my first .swf application, and I am using the free downloadable
    FlashObject.js to load the swf into the browser. The problem is
    that it sometimes loads perfectly, while other times it will not
    work at all! It is not the paths, because I have tried setting the
    images in the same directory as the swf, and not importing the
    image names thru flashVars. What drives me mad is that it works
    consistently in Explorer, the first time I load it, and the first
    time after I have cleared the temporary internet files. Otherwise
    it will not load at all. In Firefox however, if randomly fails to
    load about one time out of ten or something like that. The code is
    compiled using the free downloadable compiler. Anyone have any idea
    what may be wrong?

    I may be late but better late then...
    Not true
    You can nest hundreds of layers as long as all symbols are graphics.
    People try to use a Movie symbol and this is script executed.
    I am animator on cartoon all done in flash and we have dozens or more NESTS!!!!
    Eyes inside of head inside of Character in car on stage...
    many
    Trick to not crashing is in FLASH
    Set publish settings to FLASH 8.
    Never use FLASH 9 with Actionsscript 3... This adds a lot of instability.
    1 of these swfs in a project could kill it.
    I render SWF at 30fps at 1920x1080 then into AE, then scale down to SD wide screen resolution 720x480 16x9.. set scale to 45.5 x 44.5 percent.
    I output final animation at Quicktime ANIMATION 100 millions of colors... 1.21 (16x9)audio added at 48k
    I have hundreds of hours trying to make this work reliably and finally I got the mix.
    Then I take QT to Premiere for final edit, audio and titles.
    Good luck
    NATMAX

  • Flash Not Working; freezes my computer instantly

    Like several others it appears, I am having trouble with Flash. I just updated to the latest version today, and ever since my computer freezes every time on any website that uses Flash content. I go back and forth between Chrome and IE, and the same thing happens on both browsers: I visit a webpage that requires Flash, my computer freezes, I have to use Task Manager to close the browsers (on Chrome, a box usually pops up saying something like "The following plugin is unresponsive, would you like to end it?").
    This is quite a problem for me, as I need Flash for work.
    I have tried reading through the various solutions for the problem, but I am not very tech savvy and it seems a bit overwhelming. Any help would be greatly appreciated.
    Flash version:  10.1.102.64
    OS: Windows 7
    Flash files: Flash10l.ocx
    FlashInstall
    FlashUtil10l_ActiveX.dll
    FlashUtil10I_ActiveX
    install
    I really wish Adobe would release a new version of Flash that works properly very soon.
    EDIT: Just tried to watch a video on YouTube - froze my computer instantly.

    Hi, I would think if you had that fast of a change for the better, then that setting was probably the problem. Glad it's working correctly.  Yes, just watch it for a few days and if there is another problem, by all means just post back here on your same thread. No need to start a new one. Keep in mind tho that you may have a problem on a particular site. I have a few sites that for some reason do not agree with my system. Sears, Home Depot are two so I just avoid them:-)
    Speaking of Christmas, I think we all are busy. I think I have more lists than Santa:-) Problem is, I keep adding to do more things than I can cross off. My ideal would be to have all of my shopping done before 12/1, then bake, visit and "window shop", attend town festivities, and so on, LOL
    Hey, thanks for the star!!
    eidnolb
    Message was edited by: eidnolb

Maybe you are looking for

  • Photoshop CC really bad lagging on new rMBP

    I resently bought a new Retina MacBook Pro 13" with a nice fast 2,8 i7 proccesor and a big chunk of 16 Gb ram. After using it on my older iMac I was exited to use it on my new MacBook. But its lagging really bad. It makes it unusable for me. I don't

  • Key figure, number of decimal places are not showing in report output

    Dear experts, At cube level PO qty value is getting 0.010 where as in bex report output of PO qty showing as 0. I have chosen decimal places as 0.000 in key figure additional properties tab. In query designer also I have chosen no of decimal places a

  • 1st gen iPod touch 3.1.3 with Mavericks 10.9 compatibility?

    Wow! I had not idea a new computer would be so great. Mac pro Retina 13" is a big step up from 2005 G4. Anyway. Does anyone know if my ipod touch running 3.1.3 will work with my new machine? eventually, I'll either get an iPhone or? Not right now. I

  • Mountain Lion 10.8.2

    My Epson printer works but I can't scan even after downloading the 'fix'.  The same message still comes up which is "You can't open the application "EPSON Scan" because PowerPC applications are no longer supported. Any suggestions, anyone. Thanks.

  • Upgrade / Migrate - XI 3.0 to PI 7.0

    Hi, We have an XI 3.0 SP17 system and we're in the middle of development. We would like to move to PI 7.0 SP8 and are wondering the best method to do this: 1) Can we install a new PI 7.0 system and then transport XI IR and ID from XI 3.0 to PI 7.0 us