Flash on camera

How come when I switch you have the flash on.. My photo come out all smokey and wondering how I can change that ?

It doesn't have a protective case on it and but my mom seems to fine good quality mines just all smokey when the flash is on ?

Similar Messages

  • So i have a 2011 MacBook Pro and when i turned it on this morning a flashing folder came on with a question mark in the middle of it and it keeps flashing. So i tried googling any solutions and up so far nothing has worked. Please Help ?

    I tried googling several solutions, but so far nothing seems to work. Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8. When i do go to the repair disk utility, on the eft hand side shows two hardrives one is Untitled and another is Hitachi, i tried downloading snow leopard 10.6.8 onto a Re-writable disc  using my windows computer. When i insterted it onto the disc drive it came out under SUPER DRIVE and everytime i double click on the CD it says something about attaching images/ I also forgot to mention that the MAC OSX 10.6.8 Update shows on the left hand side on the bottom in DMG format. I dont know what else to do, please help?

    DestroyGalaxies wrote:
    a flashing folder came on with a question mark in the middle of it
    This is the firmware telling you it can't find a bootable OS X volume.
    Usually to solve this all you do is hold the option key down on the built in keyboard while booting the computer, this enters Startup Manager and then you choose OS X to boot, then in System Preferences > Startup Disk you change it to the boot volume and it tells the firmware.
    Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8.
    What you have is a 10.7 or 10.8 Recovery HD from when 10.7 or 10. was on the machine previously.
    The Macintosh HD partition only was erased and 10.6 installed on it, without erasing the entire drive like what should have occured to remove the Recovery HD partition.
    So you have a mucked up machine.
    i tried downloading snow leopard 10.6.8 onto a Re-writable disc  using my windows computer.
    Well there goes your problem there, your downloading illegal copies of Snow Leopard from a untrusted location.
    10.6 is not available for download, except from pirate sites. You likely have malware or a compromised system.
    I dont know what else to do, please help?
    What you need to do is call Apple via phone, tell them the make of your machine and order the appropriate 10.6 disks, they are inexpensive now. Some machines that came with 10.6.3+ origianlly need machine specific disks, other wise pre-10.6.3 Intel Macs can use the 10.6.3 white retail disks.
    Once you have the disks, you need to backup your personal information off the computer to a external storage drive using the emergency quick copy method, then disconnect it to prevent mistakes.
    Most commonly used backup methods
    Next follow this proceedure and make sure to select the ENTIRE drive on the far left with the drive makers name and size, this will erase the entire drive, then install 10.6 from the disk
    How to erase and install Snow Leopard 10.6
    When finished setup the machine and log onto the Internet and use Software Update to get current on 10.6.8
    Don't use pirated software, it's likely been compromised in some fashion.

  • What camera resolution mode is used by the Flash Player camera settings manager

    What camera resolution is used by the Flash Player camera settings manager? I am referring to the camera settings that you have to pull up by right-clicking on a Flash Player swf that is running, and from the right-click menu you hit settings...select the camera tab...and then you can hit the little camera icon and will show you the live video feed from the camera.
    In order for the live feed to be displayed, Flash Player requests a camera resolution mode to the driver. What mode is being requested?
    For example, could it be 160x120 @ 30fps?
    Or is it 176x144 @ 30fps?
    http://www.macromedia.com/support/documentation/en/flashplayer/help/help04.html#117113

    I have the same cam as you (it's apretty darn good cam IMHO).
    I don't ever see any resolution request when I click the icon.
    My cam initializes at 1920X1080, per the logitech specs. The box in the settings is 4:3, but the cam is running at 16:9, in apps like Skype, or FaceTime (Mac).
    It shows the same setup screen in WIn XP, Vista, Win 7 and Win 8, which ALL share the same cam on my setup.
    Being as the cam feed in the setup is 4:3, I'd have to say the resolution is 160:120  as opposed to 176:144 which would be a 5.3:3 or 16:9.

  • HT4993 i have I 4S 64 - worked fine not when i take a picture it flashes to camera roll then removes its self - cant find it any where -

    i have I 4S 64 - worked fine not when i take a picture it flashes to camera roll then removes its self - cant find it any where -

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • A mic doesn't work. Adobe Flash Player camera and microphone exceptions are different. Please, help!

    Hello!
    The trouble began in Google Hangouts on Air. When I'm in conference room I read that my mic doesn't work. I checked settings, chose "default" one time and my microphone name another time. Both variants don't help. On the right end of an address bar I read this message: "this page has been blocked from accessing your camera and microphone". I clicked it, chose "Allow", after reloading the problem returns. Then I went to Chrome exceptions and allowed my mic on the site.
    In Chrome exceptions menu I read this: "Adobe Flash Player camera and microphone exceptions are different". Though I chose "Allow" in Chrome I can't do it Fllash Player. I did all the instructions which are given to solve audio problems, but it didn’t help. I also wanted to allow excess for my mic on “Website Privacy Settings Panel”, but I can’t find https://plus.google.com in the list to allow (attach a screenshot). I’m out of ideas what else to do. Please, help!

    Hello!
    The trouble began in Google Hangouts on Air. When I'm in conference room I read that my mic doesn't work. I checked settings, chose "default" one time and my microphone name another time. Both variants don't help. On the right end of an address bar I read this message: "this page has been blocked from accessing your camera and microphone". I clicked it, chose "Allow", after reloading the problem returns. Then I went to Chrome exceptions and allowed my mic on the site.
    In Chrome exceptions menu I read this: "Adobe Flash Player camera and microphone exceptions are different". Though I chose "Allow" in Chrome I can't do it Fllash Player. I did all the instructions which are given to solve audio problems, but it didn’t help. I also wanted to allow excess for my mic on “Website Privacy Settings Panel”, but I can’t find https://plus.google.com in the list to allow (attach a screenshot). I’m out of ideas what else to do. Please, help!

  • HT1413 how to set the ringer to flash the camera flash for incoming calls

    I have seen other iphone 4 have their riinger set up to flash the camera flash for incoming calls. I have not been successful to figure it out from the settings feature. does anyone know how to do this?

    Hi jdflo50,
    The feature you are talking about was introduced in iOS 5 Software Update v1.0:
    http://support.apple.com/kb/DL1456
    Accessibility improvements
    Option to light LED flash on incoming calls and alerts for iPhone 4S and iPhone 4
    Settings > General > Assessibility > LED Flash for Alerts
    Hope this helps!
    - Judy

  • SX 60 HS There is a flashing red camera icon

    There is a flashing red camera icon after I press the shutter button halfway. I can't seem to find out what that means. I searched the user manual,. Perhaps, I am just missing it or calling it the wrong thing. Or perhaps it is so obvious that it doesn't need to be called out specifically.
    Any help would be appreciated.
    Solved!
    Go to Solution.

    Hi Scoles15,
    That flashing camera icon is an indicator for camera shake and that you should probably use a tripod or flash since the shutter speed is most likely very slow. Page 175 of the user manual provides the following information to deal with the issue:
    I hope that  helps you!
    Steve M.

  • HT201401 Flash on camera doesn't work

    Why is my flash on camera not working?

    Try quitting the Camera app and then reset your phone.
    Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    If that doesn't help, Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Final Cut HD and Flash Memory Cameras

    I picked up a Canon FS20 today (just like the FS10, FS100, FS200, etc). I have yet to open it.
    I want to buy a flash memory camera that has footage go straight from the camera's memory card to FCP - no additional conversion steps.
    Is this possible? If so, which cameras am I looking at?
    I have tops $500 to spend, but would rather float around 3-400.
    I have FCP 5, and would rather not upgrade yet.

    Greetings, other Nick.
    Listen, if you buy a tape based camera, it will take at least as long as however many minutes you shot.
    If you buy a flash card based camera it usually records in mpeg 2 or mpeg 4. Both formats need to be converted to some format that you can edit with. This will take some time. Use the opportunity to do something else. Like not sit in front of the computer.
    What version 5 of FCP do you have - 5.0.x or 5.1.x?
    If its the former, time to upgrade. 5.0 is not compatible with your Intel Mac.

  • How to use flash on camera?

    Trying to figure out if there is a flash button for my iPad camera?? Where??

    Once you open the camera, do you see an "Auto" [flash-like icon] in the upper left?
    If so, it's clickable.

  • Flash on Camera turned off

    it appears that the flash on my Z10 camera is turned off and I can not figure out how to turn it on. When I open the camera and tap the button in the lower right corner the "flash" line if grayed out. I can't find a place in settings or set up to turn the flash on or at least modify the camera settings. Help, please
    Canuck by birth 'berry by choice
    Solved!
    Go to Solution.

    Hi, you have to select the camera icon rather than the face icon in upper right corner before you can turn on flash. that should do it.
    Canuck by birth 'berry by choice

  • Adobe Flash Hardware (Camera) Issues

    First of all, I love Lion.  I can already measure the difference it makes in my daily goings about.  It's great.
    Now:  the Powerbook built-in camera usually turns on for web-based, flash-based video services after clicking through the settings window to give permission.  It is well known that Lion broke that settings window (or that the window was not sufficiently updated to work with Lion...), but Adobe's update was supposed to have fixed the problem.  But I can't get the settings to respond to mouse-clicks, and adding a web site in the system preferences window for Flash doesn't make any difference.  I simply can't get the built-in camera to turn on.  Am I missing something?  I un-installed flash and reinstalled the update, I restarted the powerbook...nothing.

    I don't really have a solution, but I can tell you that it happened to other people, too.
    There was a thread that I lost where someone had the same problem. I searched and couldn't find it, but I found this:
    https://discussions.apple.com/message/12116447#12116447

  • Exif data from sb-800 flash (d70 camera)

    Hi
    Ive seen that aperture provides more exif data than iphoto or Photoshop elements. I did a test where I tried my various flash settings, ttl-balanced light, ttl (regular) but I don't see any differentiation in the exif data. This is important when reviewing images to see which I took using each setting, and learning which would be most useful in various sitations.
    Anyone who has a similar setup or has used exif for these type of flashes? If so, please post and perhaps let me know what I'm missing here.
    Thank you
    Greg

    Hi
    Thanks for the reply, and yes Capture NX does have this information there, I find this very useful for analysis of flash photos and what works best in different settings.
    May I ask:
    1. I have a VR Nikon 70-300 lens but the vr data is blank even in Capture NX (although I downloaded 1.3.1. Do you have a vr lens and was this data available?
    2. At a first glance, it appears aperture has more exif data than Capture but perhaps the specific data that Capture NX has is more useful?
    3. If you've used both Capture NX and Aperture (and/or other apps) for those with Nikon cameras which did you find most useful?
    Thanks

  • How to decrease the latency with flash+http+camera video?

    I build a HTTP server between live camera and flash player. The flash player connect http server with NetStream. But i find there is a long latency and NetStream doesn't decode frames when the buffersize reach a special value. So i want to know, how to decrease the latency in those environment?
    And why the frame cannot be decoded when the buffersize reachs a special value. I find the buffersize*framerate is about 64. Can i low this value?

    Would you mind reposting this question over on the Flash Professional forums?  This forum is primarily for end users, the Pro forums will get you in touch with a wider developer audience.
    Thanks,
    Chris

  • Why is my macbook pro screen went off if i use photoshop , flash ,the camera and some movie makers?

    why is my macbook pro screen went off if i use photoshop , flash programe ,the camera and some movie makers?
    Inaddition also if i was watching movie or youtube videos

    Which model MacBook Pro do you have (e.g., 15" late 2011)?
    Clinton

  • Bad battery, flash blinds camera and lock button broke within 2 weeks. What to do?

    The battery was terrible when I first got the phone, it's improved a little but still nothing campred to my 3G.
    The camera's flash whites out the screen, seems either a fault of my phone or badly tested. Does anyone else get this?
    And, my lock button has broken within 2 weeks of owning the phone.
    Should I return the phone? And is anyone else experiencing theese issues?
    I have iPhone 4S.

    The Lock button and camera flash problems could actually be manufacturing defects.  I'd take it to the Genius Bar at your nearest Apple store to have the phone checked out.

Maybe you are looking for