Flash out of sync
3/16/2014 - After updating to IOS 7.1 this AM, the camera flash appears out ouf sync. All photos are sercerly "washed-out. Just me.?
Curtsiphone wrote:
All photos are sercerly "washed-out. Just me.?
Probably.
Try a restore from backup, this will reload iOS on the device and hopefully correct the issue.
Similar Messages
-
Hi, I have an issue when taking pictures with flash. Camera works fine , flash works, but the problem is when I take the shot flash lights up, but camera takes a second or two to focus, and when it shoots the flash already went off, so I can't take pictures in the dark. Please help if someone has a solution for this issue.
ThanxI doubt it's hardware. My suggestion at this point would be to reload the OS to the device. I suggest making a backup of the device using Link then using an autoloader to reload the OS to the device.
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
Flash Player doesn't play smoothly and out of sync in full screen
Hello! Everyone
The flash player (11.2.202.235) does not play smoothly and in full screen audio and vidoe is out of sync. I didn't use to have any problem at all, it only started about two weeks ago and since then despite trying various things (i.e. disabling hardware excelration, uninstalling & reinstalling, trying various browsers etc.) has not resolved the issue. I don't know why it has suddenly stopped playing smoothly as I have not installed any software recently which might have cuased this.
I am using Windows XP (service pack3) and have dual partion with dual operating system (both XP). There is the same problem on both operarting system and flash player won't run smoothly on either of them. Although my computer and graphics card is quite old but the downloaded movies/DVD playback is fine even in full screen. It runs smoothly and audio&video is in sync so I don't think it could my the graphics card.
As I mentioned I have tried all the browsers but without any luck. The BBC iplayer plays ok most of the time if not in full screen but as soon as you make it full screen the vidoe is more like a slide show and very jittery and audio&video gets out of sync. Same with youtube vidoes, they play ok when not in full screen but the video in full screen does not play smoothly and audio&vidoes gets out of sync. However the ITV player & Channel 4 content on 4OD does not even play smoothly when not in full screen and the video&audio is out of sync all the time.
It would be really helpful if anyone can suggest anything to resolve this issue as I have not been able to find anything on the internet to solve the problem and its driving me up the wall. Although I have tried to include as much details as I could think of so please let me know if I have missed any details that could be crucial in order to identify the problem.
Thank you very much for reading this and taking the time to reply and your feedback.
Below is the DxDiag report for my laptop:
Time of this report: 4/22/2012, 00:15:58
Machine name: TIMES-LAPTOP
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025-1629)
Language: English (Regional Setting: English)
System Manufacturer: TimeComputers
System Model: VT8372
BIOS: Insyde Software MobilePRO BIOS Version 4.00.01
Processor: mobile AMD Athlon(tm) XP 2000+, MMX, 3DNow, ~1.7GHz
Memory: 1248MB RAM
Page File: 809MB used, 2790MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904) DX
Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
------------ DxDiag Notes ------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
-------------------- DirectX Debug Levels --------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
--------------- Display Devices ---------------
Card name: S3 Graphics ProSavageDDR
Manufacturer: S3 Graphics Co., Ltd.
Chip type: S3 ProSavage DDR
DAC type: S3 SDAC
Device Key: Enum\PCI\VEN_5333&DEV_8D04&SUBSYS_83751071&REV_00
Display Memory: 32.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Digital Flat Panel (1024x768) Monitor Max Res:
Driver Name: s3gnb.dll
Driver Version: 6.14.0010.0025 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 3/2/2004 14:02:26, 402048 bytes
WHQL Logo'd: Yes WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: s3gnbm.sys
Mini VDD Date: 3/2/2004 14:02:30, 167040 bytes
Device Identifier: {D7B75DD3-CE44-11CF-D873-7FA3A1C2CB35}
Vendor ID: 0x5333
Device ID: 0x8D04
SubSys ID: 0x83751071
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_A ModeMPEG2_D
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled DDraw
Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
------------- Sound Devices -------------
Description: Vinyl AC'97 Audio (WAVE)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1106&DEV_3059&SUBSYS_83751071&REV_50
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: vinyl97.sys
Driver Version: 6.14.0001.4170 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/10/2006 07:32:14, 204672 bytes
Other Files:
Driver Provider: VIA Technologies, Inc.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 48000 Static/Strm
HW Mix Bufs: 1, 0 Static/Strm
HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No EAX(tm) 2.0
Listen/Src: No, No I3DL2(tm)
Listen/Src: No, No Sensaura(tm)
ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
--------------------- Sound Capture Devices ---------------------
Description: Vinyl AC'97 Audio (WAVE)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: vinyl97.sys
Driver Version: 6.14.0001.4170 (English)
Driver Attributes: Final Retail
Date and Size: 8/10/2006 07:32:14, 204672 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
----------- DirectMusic -----------
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Vinyl AC'97 Audio (WAVE), Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Registry: OK
Test Result: Not run
------------------- DirectInput Devices -------------------
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
----------- USB Devices -----------
+ USB Root Hub |
Vendor/Product ID: 0x1106, 0x3038 |
Matching Device ID: usb\root_hub |
Service: usbhub |
Driver: usbhub.sys, 4/13/2008 19:45:37, 59520 bytes |
Driver: usbd.sys, 8/23/2001 13:00:00, 4736 bytesWould you mind opening a new bug on this at bugbase.adobe.com? Please include your dxdiag report, a specific URL and a link to this forum thread.
In the meantime, you might want to try our 11.3 beta or rollback to a previous version of the player to see if that resolves the problem.
Thanks,
Chris -
Quicktime .mov is Out of Sync on My Flash Drive
I have a 8GB HD Quicktime .mov file on my desktop that plays perfectly fine. However, every time I transfer that file to my 16GB flash drive and play it back on the flash drive, the movie is about one second OUT OF SYNC. I have tried this three times with the same results. Would appreciate any help anyone could offer. Thanks.
what is in an audio layer? if there's a sound attached, then its sync property must be set to stream if you want the display and sound to sync.
have you changed all your sound's to stream and, if so, has that solved the sync problem. -
Audio out-of-sync in Vimeo Flash player in Firefox
I sometimes get reports that videos in Vimeo's Flash player play slightly out of sync in Firefox, but not in other browsers (even with the same version of Flash installed). I've contacted Adobe about this issue as well, but wanted to check if there were any known interactions between Firefox / Adobe Flash that could cause out-of-sync video?
You can advice them to check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting -
Video plays out of sync with Flash version 11.6.602.180 in Firefox
I've been receiving multiple reports that some videos plays out of sync with Vimeo's Flash player in Firefox, but not in other browsers (with the same version of Flash installed). Disabling/enabling hardware accelerated decoding does not seem to make a difference. Any ideas as to what might be causing this issue?
This could be multiple issues, but the first thing that comes to mind is the protected mode feature in Flash Player for Firefox. We've made significant improvements in our 11.7 beta and I'd recommend giving this a try:
3/19/2013 - Flash Player 11.7.700.146 Beta
If that doesn't help, or you can't update to the beta version, try the steps outlined in this post:
How do I troubleshoot Flash Player's protected mode for Firefox?
In particular, I'd recommend temporarily disabling protected mode (for troubleshooting purposes only) to see if that addresses the issue.
Thanks,
Chris -
Does anyone know a fix for video being out of sync after publishing to Flash in Captivate 6?
I'm working in Captivate 6.0.2.325 on Mac OS 10.6.8. My Captivate file is just 10 slides, and 2 of them contain talking-head style video clips 30 - 40 seconds long.
Everything looks fine in Preview, but when I publish to Flash the video segments appear choppy and the audio is badly out of sync.
Also, I have one slide where the audio does not play after publishing, though it plays in Preview. It's a widget slide.
I have tried the fixes suggested in this forum. My Preferences slider is slid all the way to retain slide quality etc. I've tried changing Flash versions and forcing re-publishing of slides. I've tried copying all my slides into a new file. No luck.
I have spent approximately 6 hours trying to resolve this problem and I'm about at the end of my rope, so any suggestions will be much appreciated! I will have to insert LOTS more video segments to complete this project.
Thank you!Thank you, Rod!
While researching frame rate I came across this helpful blog posting: Crazy about Captivate: Lessons Learned: Video and Resolution in Adobe Captivate
This is the line that caught my attention: "I discovered, after several experiments, that if you publish a course in Captivate as SCALABLE with a video inserted, no matter what the resolution, it makes the video look pixelated."
When I unclick the "scalable HTML content" button before publishing, the video is fine!
Big sigh of relief! Now I just need to figure out why audio won't play on one of the slides (it has an accordian widget, if that's relevant) and why I can no longer use Effects (I get the message, "Effect file is not valid") -
Exported Flash JPEG sequence out of sync in Premiere Pro
What I have:
CS6 version of Flash Pro and Premiere Pro.
Uncompressed audio in .wav format at 44100hz
What I am doing:
Importing the .wav file to stage in flash pro.
Creating animations based on the audio at 24fps
Exporting the animation as JPEG sequence.
Importing the JPEG sequence to Premiere Pro.
Importing the .wav file to library in Premiere Pro.
Exporting the the animation with audio as .mp4
Result:
Audio out of sync.
NOTE: This problem can also be seen when importing the JPEG sequence and audio in Premiere Pro.Here's what I've discovered while working with JPEG sequences and audio files:
Since you are dealing with individual still frames within the JPEG sequence, it will always import at a full 30fps, rather than 29.97 or 23.976 (depending on the project). The audio file, most likely, will show up as either 29.97 or 23.976. Let's say, for this example, we are working in a 29.97 project. If you pair the JPEG sequence with your audio, you will have a .03 frame difference, per second (30fps vs. 29.97fps).
You will need to conform the JPEG sequence to match the frame rate of your audio. In After Effects, while the JPEG sequence is still in the Project Panel, right click and then select "Interpret Footage." Select "Main." In this dialog box, change the frame rate from 30 to 29.97 (or 23.976). Choose either Drop Frame or Non-Drop, depending on your project.
After clicking "OK," you can take that JPEG sequence and drop it into a composition with your audio. You should be good to go. -
Flash player audio and vidio out of sync
flash player audio and vidio out of sync. audio lags 2 seconds behind vidio. this is a flash player or silverlighr problem. please help.
A lot of times it's in the video itself. A great example of it is "Tarantula", a 1955 "B" horror movie, on YouTube. About twenty minutes inti the film the audio suddenly drops about eight seconds behind the video. This happens when a video converter (software) requires more processor or RAM than the system converting it has available.
If it only happens with certain videos, it' what I've described above and there's really nothing that can be done about it.
If it happens with ALL videos you're watching, try right clicking, choosing "Settings", and under the far left tab, "Enable hardware acceleration" -
Audio out of sync in Flash Player 11
On most sites that have embedded Flash video, the audio is way out of sync with the picture (by a second or more).
One example -
http://www.ora.tv/larrykingnow/keith-olbermann-1-0_sc5nygmh
Using Flash Player 11.7.700.169
Windows XP, Internet Explorer 8
How can I fix this?
thanksThanks for the reply. The example videos are not good to test sync since the camera is moving around and no close-up lip sync, but they appear to be way out of sync. The Flash one definitely is, the HTML video ran slowly so it doesn't seem to be running in real time. I'm not sure how to generate the dxdiag report you mentioned. Here's what shows at Display Properties/Advanced/Graphics Properties dialog:
INTEL(R) EXTREME GRAPHICS REPORT
Report Date: 05/19/2013
Report Time[hr:mm:ss]: 16:16:32
Driver Version: 6.14.10.4342
Operating System: Windows NT* 5.1.2600 Service Pack 3
Default Language: English
DirectX* Version: 9.0
Physical Memory: 1022 MB
Min. Graphics Memory: 1 MB
Max. Graphics Memory: 64 MB
Graphics Memory in use: 8 MB
Processor: x86
Processor Speed: 2790 MHZ
Vendor ID: 0x8086
Device ID: 0x2562
Device Revision: 1
* Output Devices Connected to Graphics Accelerator *
Active Monitors:1
Does that help? Again, I'm using Win XP and IE8.
Thanks!
Steve
P.S. I got a notification that there is an update to Flash Player but every time I try to access it I get an error message, as if it can't connect to the server. -
Flash/Youtube videos - sound out of sync over time -[CHROME]
Hi - i have some problems with videos in Chrome - when i watch videos - the sound gets out of sync from the video over time - in the start of the video the sound is perfect in sync - but after about 7 min the sound plays around 1-3 seconds before the video. it seems like the sound is playing at 100% speed but the video is only playing at 99% speed so the sound slowly gets more and more out of sync - have tried disableling flash in chrome in chrome://plugins but no result - have updated drivers
A/V sync is hard, and there are hundreds of ways to encode a video. Adobe provides guidance on how to best publish content to ensure that it consistently plays back well, but that's an uphill battle.
A direct link to the problem video is the most useful information you could provide in this case, along with details about your system. It would also be useful to know if the A/V sync problem goes away if you disable hardware acceleration, as described in the video troubleshooting guide.
https://helpx.adobe.com/flash-player/kb/video-playback-issues.html
Thanks! -
Hi everyone,
I have an animation that I am exporting as either a .wav or .mov file then editing in different software but when I import the new file it is out of sync. That sounds confusing so I will explain.
The project is a cartoon and a temp dialogue track was created before animation started. Then that temp track was used to animate over and do lip synching. Recently, actors have re-recorded the original temp dialogue track. So, I need to export the original dialogue track out of Flash, use an editor, in this case Final Cut Pro, and replace the dialogue then export that as an audio file and bring it back into Flash.
But it is always out of sync. I have even exported a .wav file from Flash then immediately re-imported it and put it on the timeline and it is already out of sync. And it is the exact same audio! I don't even know how that could be possible. Surely if you export a wav from Flash and then re-import it, it should be exactly the same.
Does anyone have any ideas?
Cheers,
RobCouple things, Flash uses "stream" or "event" sound:
"To Stream, or Not to Stream
Flash can handle sounds in two different ways, Stream or Event. A streamed sound plays as it comes into the computer. You dont have to wait for the entire file to download. An event sound must fully download before it plays, but is stored in the memory for later re-use.
After youve placed a sound into Flash, youll have to decide if the sound should stream or not."
http://www.awdsf.com/courseware/flash/flash6_sound.htm
Second, be sure that the frames per sec of the Flash doc EXACTLY matches that of the audio.
Flash high recommmends AGAINST embedding sounds into the timeline (unless they are very short), but I've not had any problems even keeping embedded video in sync with it's sound track as long as I set the Flash document frames per second to exactly match that of the audio.
So for example, a video (with audio) recorded at 29.97 fps, and embedded directly into the main time line would need to have the Flash doc fps set at 29.97 in order to keep the audio in sync with the video. The sound is only going to play correctly at one frame rate... too slow and the wwoorrddss wwiilll ddrraagg oouuttt. Toofastandtheywillsoundfunnybecausethefrquencyofthesoundhaschanged. Makes sense doesn't it?
So it's NOT the audio that's out of sync... there is one and only one frame rate that will work for the audio... it the animation that's out of sync. Change the Flash doc frame rate to exactly match the audio... then sync the animation to match that.
Best wishes,
Adninjastrator -
Video runs slow on firefox and out of sync with audio with abode flash 12.
Ever since I installed adobe flash player 12 my videos run slow and out of sync with the audio it is like it pauses for a couple seconds and starts back working and keeps doing that.
Hi jth10,
The troubleshooting steps provided by Adobe can be found here: [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_For_Windows_users]
* Are there any settings in the Flash settings manager that changed when you updated? [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html]
*These are the recommended settings for specific resolutions [http://helpx.adobe.com/flash-player/kb/poor-video-quality-flash-player.html]
You can also try to disable hardware acceleration in the Adobe settings menu. -
"Pixelated" and out of sync movies played in flash
Hello.
Recently i had a problem with my flash player after installing a Windows Update (not sure if its related).
Movies played on sites like YouTube became out of sync and pixelated.
Im not exactly sure how to explain this, so i uploaded a few pictures of the issue.
http://img571.imageshack.us/img571/4724/utennavn1.png
http://img835.imageshack.us/img835/5623/utennavn2.png
http://img607.imageshack.us/img607/9841/utennavn3.png
The sound is normal and the only thing affected if the video. If is there is any sudden movement in the video, it will distort the image.
Im using v10.2 and am on Win7 x64. Viewing the video's in Firefox.
I had the same issue on my older computer a while back using Vista x64 in both Firefox and IE.
The problem on my older computer was resolved by simply restarting the computer. But this time that didnt work.
I also tried uninstalling and reinstalling flash, and restarted multiple times.
If anyone could help me solve this puzzle please let me know. Or if you need any more info on my specs or setup, just ask =)
I use the flash player in a daily basis. So this just really ruined my day =/install the latest driver for your video card.
-
MPEG4 video from imovie is sluggish and audio out of sync
Hi y'all,
I am new to this. So I need some hand holding here. I am working with video that was exported in MPEG4 video from imovie on a mac.
The Camera I used is a Sony FX7 HD camera with SD tape.
So Now I am trying to edit the video using Premiere Pro CS3 creative suite.
Import into CS3 is fine. Playing the imported video in the source monitor is fine as well. All looks well.
However, here are the challenges I am having:
1. When I try to play it in the Program monitor its very sluggish. Audio plays fine but picture lags behind.
2. And once I edit the the video and try to export it as flash video or as a windows media, the video and audio are out of sync.
The video is choppy as well.
Details: source video is 720x480 and trying to export to 320x240
My project details are:
DV-NTSC standard 48khz
Video is 10 min longOK, not my choice of workflows, but... I assume that the MP4's are H.264 encoded. There are many of these. Three common ones are Lead, MainConcept and Apple. Some find that one works better than the others. These are not the ONLY versions, but are common. You might want to explore others, depending on which one you have installed. G-Spot can tell you which you have.
Next, you can Render your Timeline, to get things as smooth as possible.
Note that the MP4 files are heavily compressed already. Quality has been lost, and there is nothing that can be done about that. When you Export to, say DVD, you will recompress that material, and loose even more.
In the future, have your Mac-person do the Capture to .MOV [Animation CODEC]. Or, do it yourself to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio.
Not sure of any other ways to get the MP4's playing more smoothly. Much will depend on both your CPU and on your system's I/O sub-system, i.e. your HDD's, their size, speed, controller type and how they are utilized.
Good luck,
Hunt
Maybe you are looking for
-
If turn on the mute button, my iphone 5 is mute. But I can not get informed if the alarm or timer ends. iPhone 5 is mute and doesn't viberate. I want it mute but viberate under the mute button. The Timer cann't viberate with the mute button on. I wan
-
Not all songs / artists appearing
I just manually transferred songs from my Mac (OS X 10.5.8) onto my Blackberry, with 16GB media card. My songs are sorted into artist / album folders (done automatically by iTunes). Most appear fine, but some songs and some entire artists do not appe
-
BUG: Flash Pro CC 2014 won't update to latest
I have a CC membership and have updated to Flash Professional CC 2014 on both my desktop and laptop, however whenever I open a FLA saved from my Dekstop, opened on my laptop, Flash Pro complains that the FLA was created with a newer version of Flash
-
I am a newbie in Applescript so please bare with me... I wrote a small script in order to copy a folder from another computer to my MB. In order to avoid an accidental execution of the copy process, I need to add a confirmation dialogue before execut
-
ScrnXtra - Trying to save to Windows as BMP; getting error -10
Hello Fellow Director hanger-on-ers! I have a question on awesome cast member to output ScrnXtra v2.2.0. Am trying to save screen shot of the stage to a file (bmp). The OS that is not working for me is Windows 7 using Director 11.5. Tested on Mac