Flash Played, install fails, "unable to connect to reliable source"

I have tried to install the latest AFP several times and in each instance the install fails at 47% with error "unable to contact reliable source'. I run Windows 64 bit (XP) and use Firefox brouser. I have run uninstall for older versions and have also disabled Avira security suite but have been unsuccessful. SAYWHAT ?????????

Hi,
Please try clearing your Temp File (Start-- Run -- %temp%) and Cookies Download the installer again from this location
http://get2.adobe.com/flashplayer/otherversions/
Let me know if it still stucks, try rebooting your machine.
Thanks,
Anjaneai

Similar Messages

Failed to close connection for data source "EntityDataSource"

Hi All,
I have deployed some PowerView reports on SharePoint 2013.
I have open it on sharepoint, wait for 5 mins & then I try to change any filter then I am getting following error as
Failed to close connection for data source "EntityDataSource"
Error Text:
<detail>
<ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsErrorClosingConnection</ErrorCode>
<HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus>
<Message xmlns="http://www.microsoft.com/sql/reportingservices">Failed to close connection for data source 'EntityDataSource'.</Message>
<HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorClosingConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink>
<ProductName xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName>
<ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion>
<ProductLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</ProductLocaleId>
<OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem>
<CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId>
<MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices">
<Source>Microsoft.ReportingServices.ProcessingCore</Source>
<Message msrs:ErrorCode="rsErrorClosingConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorClosingConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Failed to close connection for data source 'EntityDataSource'.</Message>
<MoreInformation><Source></Source><Message>For more information about this error navigate to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation><Warnings
xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Is it because of Session Timeout?or may be something else
Thanks in advance.

Hi Rameshwar,
Pleaese help to collect SharePoint ULS Log related to this issue for further investigation, please see:
Configure and View SharePoint Log Files and Diagnostic Logging (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ee210652.aspx
In addition, could you please elaborate this issue with more deail how this issue happened? Are you encountered this issue while you view the Power View report on SharePoint site?
Regards,
Elvis Long
TechNet Community Support

Unable to Connect to OLAP Source - Webi report

Hi
When trying to access webi report , Iam getting Unable to connect to OLAP source
Tried all the notes , All the BICS connections are fine , No of BW gateways are 2000.
Any other options
Thanks
NK

Hi NK,
Please check:
Is query running fine in BEx Analyzer.
In BEX under the Advance tab in Properties to allow access to BOBJ, we have the "Allow External Access to this Query" please make sure it is checked.
Regards,
Vizit

Flash Player Install failed with error code: 30

Hi, I want to report a problem with the Adobe Flash Player 13.0.0.182 (Mac OS X, English) installer on OS X 10.9.2. Mavericks. I'm posting this so the engineers will know what to fix in the next update version.
I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
Symptom is the first installer downloads the 2nd, starts to launch it, then quits it with "Error: Unable to proceed with the installation" and a green (success?) checkmark. The GUI provides no other assistance except to "FINISH", which leads to the generic "Adobe Flash Player could not be installed." page.
The system log says: Adobe Flash Player Install Manager[22567]: Install failed with error code: 30.
The FlashPlayerInstallManager.log says:
2014-04-13 16:12:01 -0500 [I] IM: ---------- log start ----------
2014-04-13 16:12:01 -0500 [I] IM: All install checks pass
2014-04-13 16:12:01 -0500 [W] IM: Unexpected umask value for process: 0
2014-04-13 16:12:06 -0500 [I] IM: User does not have any processes that need to be closed.
2014-04-13 16:12:06 -0500 [I] IM: [install started]
2014-04-13 16:12:06 -0500 [E] RA: Unable to launch FPInstallHelper. Error = 'launch path not accessible'
2014-04-13 16:12:06 -0500 [E] RA:
Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/FPInstallHelper':
    NSFileCreationDate = "2014-03-27 04:20:43 +0000";
    NSFileExtensionHidden = 0;
    NSFileGroupOwnerAccountID = 0;
    NSFileGroupOwnerAccountName = wheel;
    NSFileHFSCreatorCode = 0;
    NSFileHFSTypeCode = 0;
    NSFileModificationDate = "2014-03-27 04:20:43 +0000";
    NSFileOwnerAccountID = 0;
    NSFileOwnerAccountName = root;
    NSFilePosixPermissions = 2541;
    NSFileReferenceCount = 1;
    NSFileSize = 13348;
    NSFileSystemFileNumber = 4892044;
    NSFileSystemNumber = 16777224;
    NSFileType = NSFileTypeRegular;
2014-04-13 16:12:06 -0500 [E] RA:
Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T':
    NSFileCreationDate = "2014-04-07 13:43:21 +0000";
    NSFileExtensionHidden = 0;
    NSFileGroupOwnerAccountID = 0;
    NSFileGroupOwnerAccountName = wheel;
    NSFileModificationDate = "2014-04-13 21:12:06 +0000";
    NSFileOwnerAccountID = 0;
    NSFileOwnerAccountName = root;
    NSFilePosixPermissions = 449;
    NSFileReferenceCount = 12;
    NSFileSize = 408;
    NSFileSystemFileNumber = 4552991;
    NSFileSystemNumber = 16777224;
    NSFileType = NSFileTypeDirectory;
2014-04-13 16:12:06 -0500 [E] IM: [install failed: 30]
2014-04-13 16:12:06 -0500 [E] IM: Install failed with error code: 30.
2014-04-13 16:12:06 -0500 [I] IM: ---------- log end ----------

I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
Regardless... I still recommend "falling back" to 12 until they get this release right for everyone. I've read plenty of posts in the Apple forums from new iMac, Mini and MacBook users who've had nothing but trouble. Even the "gurus" there are linking to Chris Campbell's post here:
ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround
Using the offline installer completely eliminates the errors seen with the stub installer.

Flash 9 installed, but unable to view on pages

I've been helping my uncle with some recent software updates.
Recently, he renewed his Norton Internet Security subscription (for
2 years) and got a free copy of Systemworks out of the deal. Around
the same time, MSN just updated his browser and connection software
(he's on MSN dial-up).
Ever since, his Flash hasn't been working. He had 7, so he
thought he needed to update. Going to the Flash 9 install page
failed to work. Through the MSN browser, no ActiveX control
security dialog happened. I did a clean uninstall of Flash and was
able to get that security dialog. That didn't help, since no
download box came up.
So, I came home. On my computer I downloaded an
install_flash_9 msi package, burned that to a CD and installed it
on his computer. When we go to a site that has flash, it still just
shows a box with an X. I can right click on that and get the
"about" "settings" and "About Flash 9" options, but nothing there
helps.
I searched all over MSN's settings, but haven't found
anything that would block flash. I tried temporarily disabling
Norton, but that didn't help either.
His computer is slow because he has a million spyware
blockers and popup blockers, but I did make sure to shut those
down. I also went through plain IE and checked the Norton Settings
there. I made sure to allow all Flash and ActiveX content there.
Still nothing.
Can anyone help? Thanks in advance.
Wackman

MSN uses the MSN Explorer, which I think is IE6 based. He
also has IE6 installed, and that's where I can get to the Norton
Internet Security controls. I have already gone to Internet Options
and enabled all the Active X stuff. That didn't work.
I could try to run getflash again, but I think it's installed
OK. Sites report that flash is installed, but applets aren't coming
through. I *think* MSN has foisted on him an MSN Firewall which he
doesn't need with the Norton stuff.

Flash CS6: Android debug "unable to connect to the debugger"

I'm using Flash CS6 on a Windows 7 machine. I'm trying to debug on a Nexus 4 (yes, USB debugging is enabled on the device).
When I select "AIR Settings > Deployment > Debug" and publish, the app is installed on my device but it just shows a black screen for awhile, then finally a dialog on my phone appears that says:
Adobe AIR
Unable to connect to the debugger (MyPC.home)
Enter IP address or Hostname:
[text input]
[OK] [Cancel]
Neither IP or hostname seems to connect the debugger.
If I press Cancel I can use the app. I can also deploy the app as "Device release" just fine. I just don't get any debug output in Flash Pro, which makes debugging really hard since I can't see exceptions or trace actions.
I'm basically stuck and unable to debug. Any ideas?
Thanks!
-Aaron

Hi Arun,
You are sure the details that you have configured for the portal are correct?
The Developer Studio that you are using is the sap SP level as EP?
There is no proxy server between you and the portal? Check your Dev studio settings via Window>Preferences>Workbench Proxy settings.
Cheers
Dan

Flash 10 install fail after 10.6.2 update. Help please.

It all started after the new 10.6.2 update I did for Snow Leopard
I don't know if this is an something you here at adobe can fix or its something going on at Apple.
Is anyone else having this problem or is it just me?
Opera, and firefox unexpectidy quit as well.
and my wacom drivers are out of wack.
I tryed to uninstall flash player but that too unexpectidly quits.
When I try to restart it gets hung up, and I have to do a hard start to get logged into my computer again.
I ran the disk utility and repaired permissions, that didn't help.
Anyway the install failed said I should contact Adobe so here I am.

Good News I Fixed it.
So what I did was downoad and install the MacOSXUpdCombo10.6.2.dmg
Found here
http://www.apple.com/support/snowleopard/
On the left you will see the downloads, The one you want is the (combo) version.
Just as a precaution, I would recommend backups, as these little glitches are often percursers to the big fail.
I use corbonite, you can search for it on your own, or time machine ect, whatever works best for you.
Sorry I may have been rude, I have always liked Adobe products and I have no doubt that the people at Adobe are working hard to keep everything working, it must be quite hard to deal with irate customers all day.
Hope this helps some people.
Thanks again.

Netlet fails: "Unable to connect to Gateway: default:443"

i have installed the portal 3.0 sp4, MAP and HP for sp4.
when using netlet, it tells me: "Unable to connect to Gateway: default:443"
the platform.conf file contains the right gateway name.
why does the netlet uses default:443 instead of the right gateway name and port?
thnx, thomas

after reinstalling the server and the gateway, i face the same problem again, but i found out, that the error only occurs when the anonymous desktop is enabled.
logging in using ldap authentication, everything works; but logging in, using the anonymous desktop, and then loging in at the login-chanel using ldap-authentication, the error occurs, when using Netlet.
looking at the install logs, i found out that the sp4 wasn't able to update the "iwtGateway-netletproxy-port" and the "iwtNaming-sessionURL" attributes;
could one of this be respobsible for the failure ?
has anyone an idea, how to solve the problem ?
thnx, thomas

Windows 10 failing unable to connect to network

Ive just downloaded windows 10 on my hp pavillions laptop a 15-p264na and it seems like am unable to connect to the network every time i go on edge or firefox I get timed out when I check the drivers it says they are up to date , but how can it check if the drivers are suitable for windows 10 if even I cant get on via edge or firefox It seems via these forums that a lot of users have reverted to windows 8.1 then upgraded again ,My computer says its connected to my router but when i put it through a system check it says theres no connection as if the drivers not suitable for 10 , I am so dissappointed Ive wasted many hours trying to resolve this issue its like the laptop is useless unable to communicate with the outside world so it looks like I am going to have to restore windows 8.1 so any advice welcome

My WiFi and my Ethernet drivers worked on the first boot into Windows 10, then I was prompted to restart again. After that restart I was never able to get on the network again, and in Device Manager it says that both devices were unable to start and had no driver. My only fix was to revert back to Windows 7 then upgrade again. Its been fine since that.

PowerView: Failed to Close connection for data source 'EntityDataSource'

Hi All,
I am using SharePoint 2013 and SQL Server 2012 SP1 PowerView. PowerView reports are created from PowerPivot workbooks hosted on the SharePoint 2013 BI Site. The PowerView report runs fine most of the times but when I interact heavily (click different slicers,
filters, charts)with the report, all of the charts or one of the charts will grey out showing no data at all while it should actually show data. The error message which pops out is in the screenshot below:
To solve the issue. we either click on any slicer, filter on the PowerView report or refresh the IE webpage. This restores the connection and it will be active again. Can someone please let us know the fix to this?
Thanks, Ashish Singh

Hi Ashish,
The error message "Failed to close connection for data sourcee 'EntityDataSource'" doesn't give much useful information. To get more detail error message, I suggest that you turn on the Reporting Services events for the SharePoint trace log (ULS) and
post the complete error message in the verbose ULS Log. To do this, please see the document:
http://technet.microsoft.com/en-us/library/ff487871.aspx.
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support

Can't install adobe flash player, error message says cannot contact a reliable source

Everytime I try to download it, it gets to about 7% and then the error message says cannot contact reliable source. I used the adobe uninstaller to uninstall the previous versions, but no luck. I've tried locating hidden files but couldn't find any. Any suggestions?

davi884 wrote:
Everytime I try to download it, it gets to about 7% and then the error message says cannot contact reliable source. I used the adobe uninstaller to uninstall the previous versions, but no luck. I've tried locating hidden files but couldn't find any. Any suggestions?
Did you repair permissions and restarted your computer prior to re-installing?
Where did you download the flash player from?

Client Install Fails - Unable to get Win32_OperatingSystem object

I have a PC that won't install the SCCM client via Client Push. In the CCM.Log file on the site server, it connects to the IPC$ and admin$ shares using my client installation account, but then it comes back with this error:
---> Unable to get Win32_OperatingSystem object from WMI on remote machine "PCNAME", error = 0x80080005.
I know that error means that access was denied to WMI, and I verified that when I run wbemtest manually (using the same client installation account), I can connect to the root\cimv2 object on that PC but when I try to enumerate the instances of the Win32_OperatingSystem object, I get the same error.
I also tried using Computer Management applet (remotely - I have no local access to this PC) to look at the WMI Control properties. Again, I get the same access denied error so I can't check/change the security permissions that way.
I have verified that my client installation account is in the local Administrators group of the PC. I've already tried rebuilding the WMI repository - that worked but it didn't fix the access issue. I know I can install the client manually but I'm guessing I'd still have a problem with inventories, etc. that are dependent on access to that WMI object. Any suggestions about how to go about fixing the WMI access issue?
Thanks so much, --Jo

Finally getting back to this issue after vacaton... sigh.
I got a little further. I took client push out of the mix and ran ccmsetup.exe locally on the PC. This time the client installation ran. However, I'm still getting a similar error from the client itself and the client is not talking to the site. After the client was installed, only about 10 of the log files showed up in system32\ccm\logs.
ccmexec.log shows this error:
Endpoint'PolicyAgent_PolicyEvaluator' return 0x80070057 from event notification
PolicyAgentProvider.log has these lines repeating:
Failed to create actual config class for 'CCM_RootCACertificates'
Failed to update namespace 'Machine' (80041002)
Successfully updated namespace 'DefaultMachine'
Successfully updated namespace 'DefaultUser'
Failed to create actual config class for 'CCM_MulticastConfig'
Failed to update namespace 'Machine' (80041002)
PolicyEvaluator.log has this error:
Received notification that Local policy has changed.
Failed to trigger Machine settings update (80070057)
SrcUpdateManager has these errors:
Instance of CCM_SourceUpdateClientConfig doesn't exist in WMI
Failed to get instance of CCM_SourceUpdateHistory, error 80041002
ClientIDManagerStartup.log has these errors:
GetSystemEnclosureInfo failed (0x80080005)
ComputeHardwareID failed (0x80080005).
RegTask: Failed to create registration request body. Error: 0x80080005
The rest of the logs that exist (LocationServices, StatusAgent, ClientLocation, RemCtrl, and setuppolicyevaluator) appear to be OK.
These seem to all be WMI-related errors/issues, but I can't find any specific information on any SCCM/SMS websites/forums that address these particular errors in these particular log files. I've tried rebuilding the repository (several times), I've done the regsvr stuff as discussed above, etc.
I ran WMIDIAG next. It ran for a little less than two hours - not sure if that's normal or not, but the log file continued to update the entire time. Now I have this log file and I'm not sure what to do with the issues I found. I'm looking at the WMI REPORT: BEGIN section... I see instructions that make sense for most of the errors. However, the section of log file below shows the area that is most likely causing issues for SCCM because it is the same error I get on the client install. I have no idea how to fix this stuff - any help would be appreciated:
31997 14:20:05 (1) !! ERROR: WMI ENUMERATION operation errors reported: .......................................... 33 ERROR(S)!
31998 14:20:05 (0) ** - ROOT/CIMV2, InstancesOfAsync, CIM_USBDevice, 0x80080005 - .
31999 14:20:05 (0) ** - ROOT/CIMV2, InstancesOfAsync, CIM_USBHub, 0x80080005 - .
32000 14:20:05 (0) ** - ROOT/CIMV2/SMS, InstancesOfAsync, SMS_Class_Template, 0x80041011 - (WBEM_E_PROVIDER_NOT_FOUND) Provider referenced in the schema does not have a corresponding registration.
32001 14:20:05 (0) ** - Root/Default, InstancesOf, SystemRestore, 0x80080005 - Server execution failed.
32002 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_Process, 0x80080005 - Server execution failed.
32003 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_OperatingSystem, 0x80080005 - Server execution failed.
32004 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_ComputerSystem, 0x80080005 - Server execution failed.
32005 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_Service, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32006 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_Bios, 0x80080005 - Server execution failed.
32007 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_Tcpip_IP, 0x80080005 - Server execution failed.
32008 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_Tcpip_TCP, 0x80080005 - Server execution failed.
32009 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_Tcpip_UDP, 0x80080005 - Server execution failed.
32010 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_Tcpip_ICMP, 0x80080005 - Server execution failed.
32011 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_Cache, 0x80080005 - Server execution failed.
32012 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_Memory, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32013 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_Objects, 0x80080005 - Server execution failed.
32014 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_PagingFile, 0x80080005 - Server execution failed.
32015 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_Processor, 0x80080005 - Server execution failed.
32016 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_System, 0x80080005 - Server execution failed.
32017 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfProc_Process, 0x80080005 - Server execution failed.
32018 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfProc_Thread, 0x80080005 - Server execution failed.
32019 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_Tcpip_IP, 0x80080005 - Server execution failed.
32020 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_Tcpip_TCP, 0x80080005 - Server execution failed.
32021 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_Tcpip_UDP, 0x80080005 - Server execution failed.
32022 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_Tcpip_ICMP, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32023 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_Cache, 0x80080005 - Server execution failed.
32024 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_Memory, 0x80080005 - Server execution failed.
32025 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_Objects, 0x80080005 - Server execution failed.
32026 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_PagingFile, 0x80080005 - Server execution failed.
32027 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_Processor, 0x80080005 - Server execution failed.
32028 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_System, 0x80080005 - Server execution failed.
32029 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfProc_Process, 0x80080005 - Server execution failed.
32030 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfProc_Thread, 0x80080005 - Server execution failed.
32031 14:20:05 (0) **
32032 14:20:05 (1) !! ERROR: WMI EXECQUERY operation errors reported: ............................................ 17 ERROR(S)!
32033 14:20:05 (0) ** - Root/Default, SELECT * FROM SystemRestore, 0x80080005 - Server execution failed.
32034 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_LogicalDisk WHERE FreeSpace > 10000000 AND DriveType = 3, 0x80080005 - Server execution failed.
32035 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_PageFileUsage, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32036 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_BIOS WHERE Version IS NOT NULL, 0x80080005 - Server execution failed.
32037 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_NetworkAdapter WHERE AdapterType IS NOT NULL AND AdapterType != "Wide Area Network (WAN)" AND Description != "Packet Scheduler Miniport", 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32038 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_Processor WHERE Name IS NOT NULL, 0x80080005 - Server execution failed.
32039 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_DiskDrive, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32040 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_ComputerSystem, 0x80080005 - Server execution failed.
32041 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_DiskPartition, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32042 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_LogicalDisk WHERE Description != "Network Connection", 0x80080005 - Server execution failed.
32043 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_SoundDevice, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32044 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_VideoController, 0x80080005 - Server execution failed.
32045 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_USBController, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32046 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_DesktopMonitor, 0x80080005 - Server execution failed.
32047 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_PointingDevice WHERE Status = "OK", 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32048 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_Keyboard, 0x80080005 - Server execution failed.
32049 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_SystemDriver WHERE StartMode != "Disabled", 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32050 14:20:05 (0) **
32051 14:20:05 (0) ** WMI PUT operations: ........................................................................ OK.
32052 14:20:05 (0) ** WMI DELETE operations: ..................................................................... OK.
32053 14:20:05 (0) ** WMI GET VALUE operations: .................................................................. OK.
32054 14:20:05 (0) ** WMI static instances retrieved: ............................................................ 1541.
32055 14:20:05 (0) ** WMI dynamic instances retrieved: ........................................................... 0.
32056 14:20:05 (0) ** WMI instances request cancellations (to limit performance impact): ......................... 0.
32057 14:20:05 (0) **
32058 14:20:05 (0) ** 38 error(s) 0x80080005 - (WBEM_UNKNOWN) This error code is external to WMI.
32059 14:20:05 (0) **
32060 14:20:05 (0) ** 1 error(s) 0x80041011 - (WBEM_E_PROVIDER_NOT_FOUND) Provider referenced in the schema does not have a corresponding registration
32061 14:20:05 (0) ** => This error is typically due to the following major reasons:
32062 14:20:05 (0) **    - The application queried by the WMI provider is not installed, not available or not running
32063 14:20:05 (0) **      at the time of the request was made. This error can also be generated because
32064 14:20:05 (0) **      the application supporting the providers has been uninstalled.
32065 14:20:05 (0) **    - The WMI provider binary files are not accessible (e.g. access denied ACL).
32066 14:20:05 (0) **    - A WMI provider registration problem at the CIM level (MOFCOMP.EXE) or at the COM level (REGSVR32.EXE).
32067 14:20:05 (0) **      You must re-register the WMI provider by recompiling its associated MOF file with MOFCOMP.EXE
32068 14:20:05 (0) **    Note: - If the WMI provider DLL CIM and COM registrations are correct, this error can
32069 14:20:05 (0) **            be returned because the provider has a dependency on another DLL that cannot be
32070 14:20:05 (0) **            loaded (missing or bad DLL)
32071 14:20:05 (0) **          - Dependencies can be found with the DEPENDS.EXE tool coming with the
32072 14:20:05 (0) **            Windows XP and Windows 2003 Support Tools. The command line is as follows:
32073 14:20:05 (0) **            e.g. DEPENDS.EXE <PATH><Provider.DLL>
32074 14:20:05 (0) ** => If the software has been de-installed intentionally, then this information must be
32075 14:20:05 (0) **    removed from the WMI repository. You can use the 'WMIC.EXE' command to remove the provider
32076 14:20:05 (0) **    registration data and its set of associated classes.
32077 14:20:05 (0) ** => To correct this situation, you can:
32078 14:20:05 (0) **    - Install or start the application supporting these providers.
32079 14:20:05 (0) **    - Register the providers in CIM (MOFCOMP) or DCOM (REGSVR32).
32080 14:20:05 (0) **    Note: In this case the provider should also be listed in the 'missing WMI
32081 14:20:05 (0) **          provider DCOM registrations' or in the 'missing WMI provider files' section.
32082 14:20:05 (2) !! WARNING: Re-registering with REGSVR32.EXE all DLL from 'C:\WINDOWS\SYSTEM32\WBEM\'
32083 14:20:05 (0) **          may not solve the problem as the DLL supporting the WMI class(es)
32084 14:20:05 (0) **          can be located in a different folder.
32085 14:20:05 (0) **          You must refer to the class name to determine the software delivering the related DLL.
32086 14:20:05 (0) **
Thanks, --Jo

Flash plugin install fails silently on Win 8.1.

Reports success. But the adobe site which checks for it verifies it is not there and firefox keeps asking for it.
Tried all listed methods at mozilla and adobe pages. This started a couple of weeks ago. I have Firefox 33.1.1.
I'd like to do a manual install. But the directory where adobe is putting its files (under Windows, SysWOW something containing MacroMed dir) does not contain any files with the file types the manual install wizard requires ( .xpi and.jar).
This is the last bin in the flash install log:
=O====== M/15.0.0.239 2014-11-30+05-25-06.799 ========
0000 [I] 00000010 "C:\Users\Megan\Downloads\install_flash_player(2).exe"
0001 [I] 00000011 1
0002 [W] 00001036 Software\Mozilla\Firefox\extensions/Plugins 2
0003 [W] 00001036 Software\Mozilla\Mozilla Firefox\extensions/Plugins 2
0004 [W] 00001036 Software\Mozilla\Mozilla Thunderbird\extensions/Plugins 2
0005 [W] 00001036 Software\Mozilla\Thunderbird\extensions/Plugins 2
0006 [W] 00001036 Software\Opera Software/Last CommandLine 2
0007 [W] 00001036 Software\Opera Software/Last CommandLine 2
0008 [W] 00001036 Software\Opera Software/Plugin Path 2
0009 [W] 00001036 Software\Opera Software/Plugin Path 2
0010 [I] 00000014
0011 [I] 00000015 C:\Windows\SysWOW64\Macromed\Flash\FlashUtil32_15_0_0_239_Plugin.exe
0012 [I] 00000024 C:\Windows\SysWOW64\Macromed\Flash\plugin.vch
0013 [I] 00000017 C:\Windows\SysWOW64\Macromed\Flash
0014 [I] 00000022 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerPlugin_15_0_0_239.exe
0015 [I] 00000021 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe
0016 [W] 00001106
0017 [W] 00001106
0018 [W] 00001024 C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerUpdateService.exe 183
=X====== M/15.0.0.239 2014-11-30+05-25-30.392 ========
Trouble shooting info:
Application Basics
Name: Firefox
Version: 33.1.1
User Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: F.B. Purity - Cleans Up Facebook
Version: 9.3.2
Enabled: true
ID: [email protected]
Name: Flashblock
Version: 1.5.17
Enabled: true
ID: {3d7eb24f-2740-49df-8937-200b1cc08f8a}
Name: Ghostery
Version: 5.4.1
Enabled: true
ID: [email protected]
Name: LastPass
Version: 3.1.1
Enabled: true
ID: [email protected]
Name: Troubleshooter
Version: 1.1a
Enabled: true
ID: [email protected]
Name: Dangerous Websites Blocker
Version: 4.5.3.8
Enabled: false
ID: [email protected]
Name: Safe Money
Version: 4.5.3.8
Enabled: false
ID: [email protected]
Name: Virtual Keyboard
Version: 4.5.3.8
Enabled: false
ID: [email protected]
Name: YouTube Flash Video Player
Version: 33.3
Enabled: false
ID: {f3bd3dd2-2888-44c5-91a2-2caeb33fb898}
Name: YouTube™ Flash® Player
Version: 1.2
Enabled: false
ID: jid1-HAV2inXAnQPIeA@jetpack
Graphics
Adapter Description: AMD Radeon HD 8650G
Adapter Drivers: aticfx64 aticfx64 aticfx64 aticfx32 aticfx32 aticfx32 atiumd64 atidxx64 atidxx64 atiumdag atidxx32 atidxx32 atiumdva atiumd6a atitmm64
Adapter RAM: 768
Device ID: 0x990b
Direct2D Enabled: true
DirectWrite Enabled: true (6.3.9600.17111)
Driver Date: 8-19-2013
Driver Version: 13.151.0.0
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Vendor ID: 0x1002
WebGL Renderer: Google Inc. -- ANGLE (AMD Radeon HD 8650G Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 2
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20141113143407
browser.startup.homepage_override.buildID: 20141113143407
browser.startup.homepage_override.mstone: 33.1.1
browser.tabs.warnOnClose: false
dom.allow_scripts_to_close_windows: true
dom.mozApps.used: true
extensions.lastAppVersion: 33.1.1
font.internaluseonly.changed: false
gfx.direct3d.last_used_feature_level_idx: 0
media.gmp-gmpopenh264.enabled: true
media.gmp-gmpopenh264.lastUpdate: 1413347647
media.gmp-gmpopenh264.version: 1.1
media.gmp-manager.lastCheck: 1417714123
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1417670751
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
plugin.scan.plid.all: false
plugin.state.npcontentblocker: 2
plugin.state.nponlinebanking: 2
plugin.state.npvkplugin: 2
privacy.sanitize.migrateFx3Prefs: true
security.disable_button.openCertManager: false
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1417060985
user.js Preferences
Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: true
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.7
Version in use: 4.10.7
NSS
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSSMIME
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSSSL
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSUTIL
Expected minimum version: 3.17.2
Version in use: 3.17.2
Experimental Features
---------------------

Hi,
I'm a bit confused with your description, as you said adobe flash player couldn't play any vedio. How about Youtube vedio? Does it works fine?
It would be better to provide an example link for your problem, then I would made an test for you.
Roger Lu
TechNet Community Support

New install issue-unable to connect to DB server from a remote client.

Hi experts,
I am new to setting up oracle server so pls bear with me...
I setup a db server (11g on top of 64bit Oracle Linux) at home (static 192.168.1.90). I verified that db, listener are up and running. However, I tried to connect to the server from a different client machine (192.168.1.108) within my home network but the server cannot be reached. I was able to ping both client and server using the IP addresses and hostnames. I followed the following steps to perform troubleshooting but was unable to move on beyond step 3, telnet-ing the server on port 1521. Can someone help me out what I should do make the port # (1521) is reachable by the client?
1. Check with "ping" using the IP address ("ping 198.11.34.43"
2. Check with "ping" using DNS name (e.g. "tnsping uranus")
3. Try telnet to the IP on port 1521 (telnet 1.2.3.4 1521)
4. Check with "tnsping" using TNS service name
5. Invoke SQL*Plus from the OS command line "sqlplus fred@flintstone". If this fails, check to ensure that your listener is the flintstone service defined.
6. Sign-on to SQL*Plus and connect with the TNS name ("connect fred/flintstome@service_name"
7. Within SQL*Plus, try a select from table@remote_db_link
thanks a lot in advance.

user6391746 wrote:
Hi experts,
I am new to setting up oracle server so pls bear with me...
I setup a db server (11g on top of 64bit Oracle Linux) at home (static 192.168.1.90). I verified that db, listener are up and running. However, I tried to connect to the server from a different client machine (192.168.1.108) within my home network but the server cannot be reached. I was able to ping both client and server using the IP addresses and hostnames. I followed the following steps to perform troubleshooting but was unable to move on beyond step 3, telnet-ing the server on port 1521. Can someone help me out what I should do make the port # (1521) is reachable by the client?
1. Check with "ping" using the IP address ("ping 198.11.34.43"
2. Check with "ping" using DNS name (e.g. "tnsping uranus")
3. Try telnet to the IP on port 1521 (telnet 1.2.3.4 1521)
4. Check with "tnsping" using TNS service name
5. Invoke SQL*Plus from the OS command line "sqlplus fred@flintstone". If this fails, check to ensure that your listener is the flintstone service defined.
6. Sign-on to SQL*Plus and connect with the TNS name ("connect fred/flintstome@service_name"
7. Within SQL*Plus, try a select from table@remote_db_link
thanks a lot in advance.solution depends upon which ERROR is thrown.
Is COPY & PASTE broken for you?
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.

FLASH ARCHIVE INSTALATION FAIL

Hi guys,
I am just trying to install the following Flash Archive:
bash-2.05# flar -i Cms
archive_id=792943ac9a79c51395a2244413ca7bc4
files_archived_method=cpio
creation_date=20050729163902
creation_master=cmssun1
content_name=Solaris9 + Operations 8.12
creation_node=cmssun1
creation_hardware_class=sun4u
creation_platform=SUNW,Sun-Fire-V240
creation_processor=sparc
creation_release=5.9
creation_os_name=SunOS
creation_os_version=Generic_118558-09
files_compressed_method=compress
content_author=RH & RJH
content_architectures=sun4u
type=FULL
bash-2.05# ls -la Cms
-rw-r--r-- 1 root other 3458497988 Apr 27 11:32 Cms
bash-2.05# file Cms
Cms: ascii text
After booting from CD, I select Flash Archive Installation -> From Local device. I select the correct device, and when I point to the file /Cms, the program says: "could not find archive".
This Flash Archive was created on a SUNW,Sun-Fire-V240. The system I am trying to install is a SUNW,Ultra-60.
I appreciate any help.
Thanks in advance,
Ricardo

When you boot off a CD, the hard drive root file system normally is mounted under /a, assuming the image is on the system that you want to install the image on..

Flash Played, install fails, "unable to connect to reliable source"

Similar Messages

Maybe you are looking for